Used Bellow Actuator for sale (691)

Year of construction: 2025, condition: new, machine/vehicle number: H3000-H5000TM, Universal Testing Machine H3000TM-H5000TM according to DIN EN ISO 7500 The H3000TM-H5000TM series universal testing machine is a single-spindle machine with a robust design made of aluminum and V2a, featuring ball screws, ball bushing guides, and a toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a foil keyboard. A 2-line LCD display shows the force and displacement. The testing machine can be used as a standalone unit or connected to a PC via a USB interface. The displacement measurement is performed using an encoder with a visible resolution of 0.01 mm on the LCD (internally 0.0001 mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally, a second channel can be added for a second force transducer or a displacement sensor. The universal testing machine is manufactured with two different travel distances, 500 mm or 1200 mm (without load cell and testing tool). Further scope of supply: A load cell up to the nominal load, 220-volt cable, USB cable, description, CE declaration of conformity. Further information can be found in the attached description. Force transducer 3000N-5000N Measuring range: 5-5000N tensile and compressive, with nom. 2mV/V Output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate. Long-travel extensometer HE 900mm measuring path, measuring arms motorized, including electronics. Accuracy class Class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optically incremental Measuring path 900 mm, less the measuring length Display error 6 µm or 2 % Resolution 1 µm Actuation force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo setting is done manually Measuring arms Opening and closing are motorized Gedpfx Aljiq Hxko Uobu Specimen diameter 0-30 mm Specimen thickness 0-30 mm Specimen width 0-100 mm Weight approx. 32 kg Scope of supply Extensometer complete with electronics Cutting, round: 1 set of hard metal / rubber Wear parts Measuring blades optional rectangular blades CAUTION: When using optional blades, a readjustment of the Lo stop is required.

Condition: used, functionality: fully functional, Koganei ORGA40X2750 Linear actuator. Good working condition. Gbodpjtwqqgsfx Al Uou Please check out our other listings as well.

Condition: used, functionality: fully functional, Hoerbiger Origa P120S-25 Linear actuator. Good working condition. Please check out our other listings as well. Gedpetwqp Ajfx Al Usbu

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Gsdpfx Asz I S Uwol Uebu Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: used, Second-hand SKF linear actuator, type CARE 33M20041101000024 / Motorised jointer adjustment suitable for Weinig planers. Linear actuators are required, amongst other things, for automatic jointers. Gbedpfoz Hllmox Al Uju Tested and in working order. Technical data: - Stroke: 200 mm - Voltage: 24 V

Condition: like new (used), Year of construction: 2005, functionality: unexamined, For sale: complete industrial lot of 27 pcs FESTO DNG-160 pneumatic cylinders. Manufacturer: FESTO Model: DNG-160 Quantity: 27 pcs Type: pneumatic cylinders / heavy-duty actuators Condition: unused old stock / New Old Stock Age: approx. 20 years in storage Functionality: not individually tested Sale: complete lot only Location: Slovakia, EU The cylinders have never been installed or used, but have been stored for approx. 20 years. Due to the long storage period, inspection and possible replacement of seals before industrial use is recommended. Suitable for maintenance departments, machinery builders, automation companies, spare parts stock or industrial equipment dealers. Sold as shown in the photos. Loading possible. Worldwide shipping on request. Zum Verkauf steht ein kompletter Industrieposten mit 27 Stück originalen FESTO DNG-160 Pneumatikzylindern. Hersteller: FESTO Modell: DNG-160 Menge: 27 Stück Gjdjwxfrpopfx Al Usbu Typ: Pneumatikzylinder / Industrie-Aktuatoren Zustand: unbenutzte Lagerware / New Old Stock (NOS) Alter: ca. 20 Jahre gelagert Funktion: nicht einzeln getestet Verkauf: nur als kompletter Posten Die Zylinder wurden nach unserem Kenntnisstand nie montiert und nie im Betrieb eingesetzt. Aufgrund der langen Lagerzeit werden sie jedoch ausdrücklich als ungetestete Lagerware verkauft. Eine Prüfung sowie ggf. der Austausch von Dichtungen vor industriellem Einsatz wird empfohlen. Geeignet für Instandhaltung, Maschinenbau, Automatisierungstechnik, Ersatzteillager oder Händler für Industriekomponenten. Verkauf wie auf den Fotos. Standort: Slowakei, EU. Verladung möglich. Versand auf Anfrage möglich.

Condition: used, Year of construction: 2009, operating hours: 7,860 h, functionality: fully functional, total length: 2,160 mm, total width: 1,110 mm, total height: 1,600 mm, overall weight: 2,600 kg, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, We offer this used Officine Monzesi Monza 410, manufactured in 2009. MONZESI Monza 410 CNC 1 centerless grinder High-precision machine in excellent working condition, available for inspection under power. Ideal for high-volume precision grinding (automotive, medical, aerospace, or micro-technical components). The original configuration of this machine made it possible to perform micrometer-precision machining of highly sensitive parts (sapphire disks). 🛠️ Key Technical Specifications • Workpiece capacity (external diameter): From 3 to 100 mm. • Maximum plunging/traverse length: 200 mm • Grinding wheel: Max. external Ø 406 mm | Max. standard width 200 mm | Motor power 15 kW (1560 rpm). • Drive wheel: Max. external Ø 254 mm | Max. standard width 200 mm | Brushless servomotor 3.9 kW, variable speed (5 to 285 rpm). • X-axis (Slide Feed): Satellite roller screw (Ø 32 mm, pitch 5 mm) driven by a 6 Nm digital servomotor with a direct optical scale for absolute micrometer precision (programmable minimum increment of 0.0005 mm). 💻 Numerical Control & Automation • CNC: FANUC Power Mate iD digital with Fanuc motors and actuators. • Operator interface: Color touchscreen with graphical pages designed for quick and easy operation. • Electronic precision: Programmable minimum increment of 0.0001 mm. • CNC advantages: Absolute encoders (pulse coders) eliminating the need for referencing at start-up, statistical management of the X-axis with programmable automatic compensation for grinding wheel wear. 📦 Included Accessories and Peripherals The machine is sold with its original equipment and essential workshop accessories: • Oil mist extraction: AR FILTRAZIONI model ARNO 1 VF system (max. flow rate 1500 m³/h) for pollution control in the work area. • Mechanical equipment: Blade holder for in-line operation, grinding wheel holder (Ø 203 mm), drive wheel holder, and static balancing devices and pivots for the grinding wheels. • Safety & Ergonomics: Full sliding protective enclosure compliant with CE standards, secured by automatic locking during wheel rotation, and equipped with internal lighting. • Complete original documentation: Installation, operation, and maintenance manuals, parts catalog, and complete electrical/hydraulic/pneumatic diagrams. (Note: Machine sold without its original fabric filter unit). 📝 Sales Terms & Logistics • Year of manufacture: 2008. • Condition: Very good condition, regular geometric cycles. • Inspection: Machine available for inspection in working condition and under power for testing. • Removal: Lifting, handling, loading onto a truck, and transportation are the sole responsibility of the buyer. (Provide lifting equipment suitable for the weight of the machine base: 2,600 kg excluding the electrical cabinet). • Price: CHF 30,000 (excluding VAT). Manufacturer: Officine Monzesi Model: Monza 410 Gedpfjz Ernlox Al Ujbu Year of manufacture: 2009 Condition: Used Category ID: 26 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT22001014840, empty load weight: 4,000 kg, maximum load weight: 16,000 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,975 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Year of construction: 2026, Equipment: center pivot plate, Archive photos - actual vehicle may differ #Container locking system 2 pairs of locking hooks recessed into the floor Pneumatic actuation Low-tension locking system, clamping force 6 t per claw Genuine original for 30+ years 2-point internal container locking; skip containers with internal ridge not lockable (for skip containers with sub-frame to DIN 30722, rear-loaded) Note: push container fully flat at the front roller recess Longitudinal guide rails, laterally adjustable/removable, approx. 115 mm high Turntable with heavy-duty ball-bearing slewing ring 8 pairs lashing points, top/side, outer frame, 5 t each 7 pairs combi stake pockets, bolted ring eyes, 5 t each, outer frame, approx. 72x42 mm (usable w/ plug-in stakes; fitted stakes block 5 t eyes) 1 lockable plastic tool box, W=600 / H=425 / D=460 mm 1 open storage box for container net Turntable trailer towing gear Drawbar with certified 40 mm tow eye Lowerable Y-shaped drawbar, pneumatic raise/lower assist (for Absetzcontainer transport, rear-loaded) #Axles & suspension BPW or SAF drum-brake axles, manufacturer's choice Laser-aligned axles/running gear - reduces tyre wear and fuel use Axle grease points extended outward Air suspension with raise/lower valve Air-bellows pressure gauge #Wheels & tyres 235/75 R 17.5, manufacturer's choice Steel wheels, twin arrangement, factory silver TPMS to ECE R 141, shown via EBS on tow display, no truck install (pre-equipped; standard tyres only) #Braking system 2-line air braking system Godpfszy Rw Rex Al Usbu Spring-loaded parking brake Axle load detection via EBS CAN-bus, cab display; truck pre-equipped, no install (not a calibrated scale) Vehicle driving stability system Front Duomatic connection, with line to towing vehicle 24V EBS electronic braking system, front EBS connector and cable Caution: tow only with vehicles that guarantee ABS effectiveness #Electrics 24V LED multi-chamber lamps; yellow LED side lights; LED plate light (false diagnostics possible on some tow vehicles) Yellow LED side lights coupled with indicator (flashing side lights) 2 white LED front position lights 2 white/red LED rear outline marker lights 1 x 15-pin front connector, with connecting cable Parking sockets for electrics, air and EBS on the drawbar Additional rear LED work light, via reversing light LED beacon with mount, switched via sidelight (lamp removable) LED work lights both sides, via reversing light #Floor Steel floor Front roller recess in floor for skip containers 5,000-7,000 mm long Note: slight floor waviness possible due to welding distortion #Loading ramps Lockable storage space for loading ramps beneath the load bed 1 pr aluminium ramps ca. 3,000x450 mm, 14,000 kg/pair (not for steel chains/tyres; rear rail) #Country of registration / plates Country of registration: Germany With Dekra inspection and report (per §13 EG-FGV) Contour marking, reflective tape to ECE R 048, white sides/red rear

Condition: used, functionality: unexamined, machine/vehicle number: SAF 30NC, Used AMG-PESCH SAF 30NC pneumatic actuator with valve Manufacturer: AMG-PESCH GmbH Model: SAF 30NC Godpfx Alsxp H Eve Usbu With Festo vsnc-fc-m52-md-n14-f8 “solenoid valve” For sale per set

Year of construction: 2019, operating hours: 5,600 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: DRPL/LP29, Equipment: CE marking, PELLET PRODUCTION LINE – COMERC – CAPACITY 2 T/H Pellet production line with a capacity of 2 t/h, line length 25 m. Raw material: sawdust (spruce, pine, larch). Operating hours: 5600 h. The complete line includes: Sawdust hopper – 80 m³ Screw conveyor from the hopper – length 6 m Gbedpfx Alsz Hw Umo Uju Sawdust bucket elevator – length 7 m Buffer tank – 1 m³ for the humidification station Humidification and moisture stabilization station Sawdust bucket elevator – length 7 m Granulator buffer tank – 1.5 m³ Screw conveyor to the granulator – length 2 m RMP 520 Munch granulator Acid-resistant bucket elevator – length 8.5 m Gallen Cuntelfloor pellet cooler Pellet sifter Bucket elevator – length 8.5 m Finished pellet storage tank – 3 t Manual bagging machine – 2–3 people, up to 20 t/shift JKF 15 kW fan for aspiration Aspiration system – extraction from the entire line Cyclone – diameter 1 m Control cabinets – complete Control, measurement and actuation equipment, moisture sensors (2 units) Explosion-proof early spark detection and extinguishing system Visual process overview to be implemented along with the control panel Installed power 217 kW We can send more photos and specifications to interested parties via email. The line is in working condition. Disassembly of the line is the responsibility of the seller. Collection and transportation of the machine is the responsibility of the buyer. We also offer assistance with reassembly, commissioning, and service support. On-site inspection is possible.

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Gedpfsxx Tigox Al Ujbu Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance Gbjdpfexg Dhcox Al Ueu - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Condition: good (used), Year of construction: 1999, functionality: fully functional, saw blade diameter: 500 mm, grinding wheel diameter: 200 mm, year of last overhaul: 2021, saw blade width: 6 mm, overall weight: 900 kg, rotational speed (max.): 140 rpm, rotational speed (min.): 40 rpm, Equipment: rotational speed infinitely variable, We are offering this well-maintained Schmidt Tempo ECE 45 saw blade sharpening machine, manufactured in 1999. Manufacturer: Schmidt Tempo Type: ECE 45 Year of manufacture: 1999 Condition: good Gearbox for saw blade feed replaced in 2019 Grinding spindle drive belt and bellows renewed in 2021 Sharpening machine for metal HSS saw blades. Technical specifications: Saw blade diameter: approx. 20 mm to 500 mm (Other sources state capacities of 20–400 mm). Saw blade thickness: Maximum 6 mm. Working speed: Continuously adjustable from approx. 40 to 140 strokes per minute. Grinding wheel diameter: Maximum 200 mm. Number of teeth: Electronically pre-selectable from 20 to 999 teeth. Weight: Depending on the configuration, between approx. 900 kg and up to 1.2 t. Functions and adjustment options The machine offers comprehensive processing options for different tooth geometries: Supported tooth shapes: Angular tooth, high rake tooth, and low rake tooth according to DIN 1840 (tooth shapes A, B, BW, C). Gbsdpfx Aljz Hmhpj Uou Automation: Automatic feed of the grinding wheel and an automatic dressing device. Grinding modes: Support for free grinding, oscillating grinding, and circular grinding. If you have any questions or require further information, please do not hesitate to send us a message.

Condition: used, Year of construction: 2007, functionality: fully functional, 1 lot approx. 15x Revo END KSB ROLL servomotors Valve quarter-turn actuator Actuator ACTAIR NG 5 F05/07 End ZA27-ED63 Revo RD501200500000 Gbsdpfxoum I Sfo Al Ueu Only for sale complete Used from roll car wash disassembly Item location is 75053 Gondelsheim Used condition, see pictures Shipping by forwarding agent or collection by appointment

Condition: good (used), Year of construction: 2010, functionality: fully functional, Matec 30 L, Year of manufacture: 2010, Control system: Heidenhain iTNC 530, Travel range X/Y/Z: 1300/600/700 mm, Spindle speed up to 12,000 rpm, Gbsdpfxjz Dgr Ns Al Uju Tool holder: HSK 63 - A, Electric handwheel, Coolant pressure: 20 bar, Paper band filter, Coolant capacity: 80 liters, Full enclosure for the working area, Direct measuring systems, Chip conveyor, Bellows with steel lamellae, 3D measuring probe, Laser measuring device.

Condition: used, Bosch Rexroth Hydraulic Power Unit 5.5 kW / 100 liters tank Bosch Rexroth Hydraulic Power Unit 5.5 kW / 100 liters, Used machine Manufacturer / Integrator: Bosch Rexroth Kft. Motor Manufacturer / Type: Lammers Elektromaschinenfabrik 12AA 132S-4 (IE1) Year of manufacture / Serial No.: 208/2002/15 Drawing No.: ABHAG-100S41-1483-B Hydraulic Diagram: HS51-D434-C Condition: Used, industrial execution Dimensions and capacity: Godpfx Alez Rxfps Uobu Overall dimensions: 930 x 760 x 2120 mm Tank capacity: 100 dm³ (100 liters) Recommended oil type: HVU-46 Technical and operating parameters: Motor power: 5.5 kW (at 50 Hz) / 6.3 kW (at 60 Hz) Electrical connection: 400/690 V Δ/Y (50 Hz) / 460 V (60 Hz), 11.2/6.5 A Motor speed: 1440 rpm (at 50 Hz) Max. operating pressure (directional valves): pmax = 350 bar Valve manifold execution: Bosch Rexroth 4WE 6 E62/EG24N9K4 directional valves (24V DC) Protection class / Efficiency: IP55 / IE1 Design, Operation: High-quality industrial Bosch Rexroth hydraulic power unit featuring a 100-liter oil reservoir, a 5.5 kW Lammers electric motor, and a manifold stack with 350 bar Rexroth directional solenoid valves. It supplies pressurized hydraulic fluid to drive and control hydraulic cylinders, presses, and automated machinery. Suitable Application Areas: Hydraulic power supply and control for industrial presses, bending machines, and metalworking equipment. Centralized hydraulic unit for special-purpose machinery, lifting devices, and clamping systems. Multi-actuator control in automated manufacturing lines.

Condition: ready for operation (used), machine/vehicle number: 06G1062, Drive = compressed air, Material/air ratio = 17:1, Maximum material pressure = 110 bar, Air inlet pressure = 1 to 7 bar, Godoiv Ht Ispfx Al Usbu Output volume per double stroke = 60 cm³ with MX spray gun with double hose, unused since the last maintenance in 01/20, Condition as inspected, Ex works, from warehouse Seevetal, subject to prior sale.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 21334, The ideal machine for curtain wall elements For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset EP 124 / EP 124/20 Gsdpfx Aloz H Afwe Uebu Pressing height 140 / 200 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 Kg We can ship the machine to your address via company DSV

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm Gjdez E S Hhepfx Al Usbu • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.

Condition: excellent (used), functionality: fully functional, two milling units two motors with a power of 1.5 kW pneumatic shooting device sanding unit pneumatically actuated pressure shoe maximum belt width: 80 mm motor power: 1.5 kW pneumatic oscillation Gbodozz Nqropfx Al Uju adjustment of units in two axes stepless feed speed adjustment power supply: 380 V

Year of construction: 2009, condition: like new (used), Tuflin chick valve, DN 80, with pneumatic actuator and electric switching module Manufacturer: Xomox Nominal size: DN 80 Material: 1.4408 (V4A) Pneumatic actuator: Part No.: 716301-5 Article No.: XRP-RO53800148KXD40 Year of manufacture: 2009 Pmax (psi): 5/70 QSP: 8 In very good condition! Gbsdpfx Aod Rww Isl Uou Tuflin chick valves, some unused, therefore in new condition!

Condition: used, functionality: unexamined, -KOM 3181- Two used Graco Inc. bellow pumps are offered for sale here. The pumps have the component designation G05B15 A22A. Max. oil temperature: 71 degrees Celsius Max. flow rate: 9 l/min Max. pressure: 6.9 bar Weight: 42.8 kg (per pump) Gbedpszltm Sefx Al Uou

Condition: used, Year of construction: 2023, machine/vehicle number: SE_00650, This RIDE60 type electric motor test stand, manufactured by FAZUA (custom-built), is for the RIDE60 electric drive series and was manufactured in 2023. It will be auctioned off in our online auction entitled "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: Manufacturer: FAZUA (custom-built) Type: End-of-line test stand Year of manufacture: 2023 (according to the nameplate of one station) Condition: used, functionality not checked Quantity: 3 identical stations available (auctioned separately) Location: 85521 Ottobrunn near Munich Test stand for final inspection of e-bike drive units from series production. The drive unit is tested and calibrated under load; power and torque are measured, among other parameters. Complete with control computer and label printer. Technical data (information without guarantee) Test track with servo motor, 2 pneumatic brakes, and torque sensor Metal bellows couplings Mount for the drive unit with quick-release mechanism Safety enclosure made of aluminum profile with transparent flaps Gbsdpfoz Ng Aysx Al Uju Base cabinet with 3 doors Control panel with emergency stop, main switch, start button, indicator lights, and 2 manometers Panel PC 15.6" Label printer Zebra ZT231 Hand scanner (not on all stations) Operating voltage 230 V / 16 A / 50 Hz (according to the nameplate of one station) Compressed air connection required (6.5 bar) Dimensions approx. 1,800 x 600 x 1,400 mm Sale Sale via online auction on RESTLOS.com. Bidding ends on 19.10.2026. Viewing: [16.10.2026; 9:30 a.m. to 12:00 p.m. – booking via our RESTLOS auction platform] All information without guarantee. Functionality not checked. Test software is not included in the offer unless expressly stated.

Condition: like new (used), Year of construction: 2022, KUKA KR 700 PA Palletizing Robot, Unused (2022) 700kg pay load. Lifting capacity: = 375kg/layer. Gedpfx Ajz Nk Uael Uebu Layer height: = 400mm (Standard). TECHNICAL INFO: Layer Picker head, designed for pallet format: 800/1000 x 1200 mm HD Bellows (2-side 3-chamber bellows for pallet format 800/1000 x 1200 mm). Soft Touch for increased product handling.

Condition: like new (used), Spirax Sarco BSA2T Bellows Sealed Shut-off Valve DN200 PN25 NOS Unused Spirax Sarco bellows sealed shut-off valve from stock. High-quality industrial design for steam, condensate and process media. Includes counter flanges. Manufacturer: Spirax Sarco Type: BSA2T Valve Type: Bellows Sealed Shut-off Valve Nominal Size: DN200 Nominal Pressure: PN25 Series: BSA2T Design: Bellows Sealed Valve Seal Type: Bellows Seal Connection: Flange Pressure Stage: PN25 Maximum Operating Pressure: 25 bar(g) Maximum Temperature: 350 °C Body Material: Spheroidal Graphite Cast Iron SG Designation: EN-JS 1025 Gbedjzb Rdhepfx Al Uou Flow Direction: indicated Handwheel Operation: Yes Counter Flanges: included Country of Manufacture: United Kingdom Condition: NOS New Old Stock