Used Impact Mill for sale (10,406)

Condition: good (used), Year of construction: 2013, operating hours: 4,951 h, functionality: fully functional, machine/vehicle number: 1002823, travel distance X-axis: 1,020 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 240 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 3,500 mm, table width: 1,000 mm, table length: 1,400 mm, table height: 960 mm, table load: 200 kg, overall weight: 2,000 kg, operating hours of spindle: 2,803 h, DATRON M 10 PRO A CNC Milling Machine - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Rated current: 16 A - Operating pressure: 7 - 10 bar - Travel (X-axis): 1020 mm - Travel (Y-axis): 830 mm - Travel (Z-axis): 240 mm - X and Y travel restricted by tool changer: 1020/720 mm - Gantry clearance: 200 mm - Bushing spacing: 100/100 - Table cutout (width/depth): 630/348 mm - Table width: 1000 mm - Table depth: 1400 mm - Table height: 960 mm - Max. table load: 200 kg - Distance to outer edge: 175/148 mm - Indicated machine hours: 4951 h - Spindle running hours: 2803 h The machine is equipped with a tool presetting device from SCHUNK, type TRIBOS. Includes various holders and a vacuum pump. FCA D-73235 Weilheim Teck – loaded on truck Hfjdpfxjxxwxfs Abroc

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition with 3 sets of rotor and stator knives Hodsyg E Skjpfx Abrsfc with 2 sets of screens, 5 and 8 mm AVAILABLE AND READY TO WORK

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm with electrical cabinet Hfsdpfx Ajyg E Ifobrsc AVAILABLE AND READY TO WORK

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Hfsdpfxoyi A Tdj Abrec Storage location: Nattheim

Condition: used, machine/vehicle number: 14019, Rotor diameter: 800 mm Rotor width: 600 mm Rotor knives: 6x16 Stator knives: Feed opening approx. 580x400 mm Hfodpfx Aboyiguvjrsc Drive motor: 75 kW

Condition: used, Year of construction: 2006, operating hours: 37,000 h, functionality: fully functional, TRAUB TNX65 with bar feeder and accessories Year of manufacture: 2006 Operating hours: 37,000 h Control: TX8i - Two tool turrets resealed - High-pressure pump replaced - Machine fully functional - Geometry within manufacturer's tolerances Accessories: - 2x Hainbuch chucks - Various tool holders (see images) - Breuer bar feeder (1200 mm) - Number of spindles: 2 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001 [degrees] COUNTER SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 [kW] - Spindle speed: 7,000 [rpm] - Max. bar diameter: 42 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel: 700 [mm] LEFT UPPER TURRET - Number of positions: 10 - Number of motorized positions: 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] RIGHT LOWER TURRET - Number of positions: 10 - Number of motorized positions : 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] Hedpfx Ajwm Igfsbrefc - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive: 95 [kW] WEIGHT AND DIMENSIONS - Space requirement: 5,450 x 2,318 [mm] - Machine height: 2,258 [mm] - Machine weight: 10,000 [kg]

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 500 mm, turning diameter: 390 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 1,300 mm, bar passage: 65 mm, total height: 2,700 mm, total length: 7,000 mm, total width: 3,000 mm, overall weight: 12,000 kg, Equipment: documentation/manual, Manufacturer: DMGMORI Type: CTXbeta1250TC Year of manufacture: 2008 (retrofit in 2022) Control: Siemens 840D Solutionline Number of axes: 5 axes Equipment: - automatic tool changer - swivel head as B-axis - belt filter system with internal cooling and chip conveyor - differential pressure clamping main/counter spindle - workpiece collection device - preparation for bar loader (optionally available) Technical data: Max. turning diameter 500 mm X-axis 450 mm Y-axis 100 mm Z-axis 1300 mm B axis 220 ° Spindle bore 65 mm Speed 5000 rpm Spindle power 34 kW Counter spindle speed 6000 rpm Counter spindle passage 52 mm Counter spindle power 20 kW Tool changer 24 B-axis mount HSK 63 B-axis spindle speed 12000 rpm B-axis power 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant device: Yes Hodpfx Absubyv Rorjfc Internal coolant supply: Yes Options: · Full cabin · NC swivel head as B-axis · Coolant device and chip conveyor · Documentation · Geometrically within the new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer's tolerance for new machines - All wear parts replaced Retrofit 2022: - Linear guides Z1 and Z2/3 replaced - Linear guide Y-axis replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) renewed - sliding plates overhauled - hoses and cables overhauled, drag chains revised - cabin doors repainted, viewing windows renewed - maintenance carried out according to manufacturer's specifications

Condition: reconditioned (used), Year of construction: 2005, operating hours: 53,500 h, functionality: fully functional, turning length: 1,500 mm, turning diameter over cross slide: 640 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, spindle bore: 107 mm, travel distance X-axis: 550 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 1,500 mm, total height: 3,100 mm, total length: 10,000 mm, total width: 5,000 mm, overall weight: 20,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: DMGMORI Type: GMX 400 linear Year of manufacture: 2005 Operating hours: 53,500h Spindle hours: 22,000h Control: Siemens 840D powerline Equipment: Hfedpfx Absv Euhnjroc - 7 axes - automatic tool changer (60 positions) - swivel head as B-axis - 12-way tool turret as additional axis, VDI40 with 12 driven tools - belt filter system with internal cooling and chip conveyor Condition: - machine fully functional - geometry within the manufacturer's tolerance for new machines - all wear parts replaced

Condition: good (used), Year of construction: 2009, Ref. -No.: 10625 Manufacturer: DMG Type: DMC 125 FD duoblock Year of construction: 2009 Type of control: CNC Control: Siemens Sinumerik 840 D Hfsdpfsyh T Nqex Abrjc Storage location: Halberstadt Country of origin: Germany Machine-No.: 1166XXXXX X-Travel: 1250 mm Y-Travel: 1250 mm Z-Travel: 1000 mm B-Axis: 360 ° C-Axis: 360 ° Spindle Taper: HSK-A100 Max. Workpiece diameter: 1250 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 500 mm Max. Tool Diameter: 400 mm Table speed range: 800 min/-1 Tool Piece Magazine With: 180 Pcs./pcs. Spindle Turning Speed - Stepless: 10000 RPM Max. Workpiece height: 1600 mm Rapid Travel X/Y/Z: 60000 mm / min Further information: - Pallet system with 6 pallets + 1 pallet (spare pallet – new – packaged) The machine can be inspected under power.

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Hodpfoyhph Eex Abrefc Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Face milling cutter (28465) Make Widia Face Mill Hfodpfx Ajrwfpxjbrsc M 640,Type 125 B 12 RS 60 HP 06D Diameter 125 mm 12 cutting edges new and unused in opened packaging

Condition: new, Copy and face milling head (28466) Make Widia Type M 100 Copy Mill D 63 OZ5 Hjdpfx Aberwfpferjfc diameter 63 mm in opened original packaging

Condition: used, Manufacturer: Manuel OrtizModel: MLIType: Hammer millMotor power: 2.2 kW / 3000 rpmScreen: 2 mmMachine dimensions: 50 x 45 x 125 cmWeight: 40 kg Hfedpfx Asyhhw Esbrec

Condition: used, Technical Data: Travel X/Y/Z: 700 / 250 / 430 mm Upper slide travel: 630 mm Spindle speeds: 45 - 1660 rpm Spindle taper: SK 40 Control: conventional Table feed: 24 - 402 mm/min Milling head swivels: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (W x D x H), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital readout - Machine lamp Hfsdeyi E Udjpfx Abrjc - Coolant device - Machine feet

Condition: excellent (used), Professional set of milling and drilling tool holders with SK40 / ISO40 taper, compliant with DIN 69871 A standard. The set includes approximately 25 ready-to-use tools with mounted milling cutters and drills. Tool diameter range: from Ø4 mm to Ø12 mm – an ideal set for serial production. Holder length: 50 mm – compact and precise, perfect for CNC machining centers. The set includes various tool types: end mills, taps, countersinks, solid carbide drills, and chamfer mills. Some tools are coated – suitable for machining steel, stainless steel, aluminium, and cast iron. All holders are used and in good technical condition – inspected and ready for immediate use. Products from renowned brands: ZÜRN Germany and Orion. Option to purchase the entire set or individual items. Hfodpfx Ajxldr Esbrec

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Mounting type: SK40 Hfedpfx Asxcg H Hjbrjc Sleeve: Ø12 mm Grip length: 50 mm Standard: DIN 69871 AD/B Condition: used, fully functional, ready for operation Please note that several units are available, all in the same Ø12×50 size.

Condition: excellent (used), For sale: complete GARANT SK40-10-50 tool holders equipped with VHM solid carbide end mills. Products from the renowned Hoffmann Group Germany, ready for immediate use on CNC machining centers. • Clamping type: SK40 (DIN 69871) • Bore size: Ø10 mm • Length: 50 mm • Catalogue no: 300100.10 • Balancing: G2.5 up to 25,000 rpm • Set includes: VHM solid carbide end mills Ø10 (various types – visible in the photos) • Ideal for machining steel, stainless steel, cast iron, and metal alloys • Very good condition – tested and ready for use GARANT tool holders ensure top-quality clamping and machining precision at high spindle speeds. -- PRICE IS PER PIECE -- Hfsdpfx Abew Sy Aherjc

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. - 1.1kw engine. Hodpfx Abov T Ttforsfc - We will help you organize a profitable shipping company or courier.

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines • German manufacturing quality • Sturdy frame and knife assembly Very good condition, mechanically inspected, ready for operation. Hsdjvyumyopfx Abrsfc

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Hodpfsu U R E Asx Abrsfc

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Control: F31iA X axis travel mm: 560 Y axis travel mm: 560 Z axis travel mm: 630 B axis travel: 360.000° Table load capacity: 400 kg Cutting feed rate X/Y/Z mm/min: 50,000 Maximum rapid traverse X/Y/Z m/min: 50 Spindle speed rpm: 14,000 Spindle power kW: 18.5 Taper type: BT-40 Torque Nm: 120 Magazine type Magazine positions: 60 Maximum tool diameter mm: 70 Hfsdpfx Abeyhlqpsroc Maximum tool diameter with adjacent positions empty mm: 140 Maximum tool length mm: 400 Maximum tool weight kg: 8 Coolant tank capacity l: 500 Through spindle coolant pressure bar: 70 EQUIPMENT Chip conveyor Through spindle coolant with high-pressure pump, 70 bar Tool breakage detection probe Renishaw spindle measuring system Extended tool offsets: up to 400 offsets Additional coordinate systems: 48 Workpiece coordinate systems Tool life management Extended program memory: Total length 1,280 m (512KB) Up to 1,000 storable programs Preparation for NH4000 8CPP + 8 Pallets

Condition: good (used), Year of construction: 2001, Power: 4.5 kW Hfodpfjyipnujx Abrsc Drilling capacity: 30 mm End milling: 25 mm Motor power: 0.85/1.5; 2.2 kW

Condition: reconditioned (used), Year of construction: 1976, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – workshop inspected Machine No.: 51720/08 Geometric acceptance with inspection protocol Accessories: Hsdpfx Asyipmwobrofc - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine technically corresponds to the standard at the time of manufacture.

Condition: excellent (used), Year of construction: 2020, Distance between spinles 800mm, Y axis (+/-105mm), C axis 0.001 degrees, Hodpfjw Nwfbsx Abrsfc B axis -30/+210 degrees, main spindle speed 5,000rpm, sub spindle speeds 6,000 rpm, milling speed 12,000rpm, bar capacity 65mm, 38 station ATC, spindle power 22/18.5 kw, Siemens 840D control, tool setter, through spindle coolant, magazine barfeed, robot loader,

Condition: used, functionality: fully functional, HURE Milling Machine Brand: HURE Longitudinal travel - X axis: 1000 mm Cross travel - Y axis: 600 mm Vertical travel - Z axis: 500 mm Table size: 1600x400 mm Spindle speed: 10 to 2000 rpm Approximate weight: 3300 kg Hfsdpfoxltzpjx Abrjc