Used Interface Converter for sale (6,526)

Condition: used, Kübrich   Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench   Details of the test bench: (See Figure 13) Frame with Iijdpfx Aszhkb Sep Djh (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box   Intended use: The test bench is used for carrying out tests on belt starter generators during development.   Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (short-term, less than 1 s) Control voltage 24 V   Mechanical performance data according to the data sheet of the load machine A gear ratio of 1:2 to the test specimen shaft must be considered. Speeds: Load machine: Manual operation: 0 - 50 rpm Automatic operation: min Test specimen motor: Manual operation: 0 - 0 rpm Automatic operation: 0 - rpm   Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm   Weight: approx. 1.2 t   Condition: used   Scope of delivery: (See Figure)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Iiodpfx Aevvkfdop Dsh

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. Isdpfjz Rvi Eex Ap Dsih - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting - BRK 23 system - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Condition: used, CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Iiodpfx Apjzh D E Rj Dsh Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, machine/vehicle number: 419032539, Caterpillar D11 N R torque converter * reconditioned * More information Iiodpfx Apemwitze Djh Type: Gearbox,

Condition: excellent (used), functionality: fully functional, machine/vehicle number: V00002513199, input current: 415 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2025, power: 400 kW (543.85 HP), Equipment: documentation/manual, type plate available, Exact type designation: Iiedpfx Apjrwzr Uo Doh VACON0100-3L-0416-7-ED-FLOW+SEBJ+IP54+EMC4+WT03+FL03+DLNL+CIFD+C CET000109+EMAT+GNUL+GADN INPUT: Uin:3~AC,525-690V, 50/60Hz, 415A OUTPUT: 3~AC,0-Uin, 0-320Hz, 416A POWER: 400kW:690V / 450HP:600V ° With TEST SEAL! ° Only 13 operating hours - according to the manufacturer over 100,000 possible! ° Easy to use thanks to the integrated control panel ° Quick parameterization possible ° Original operating instructions for commissioning included Only 3 more in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready to use.

Condition: used, type of input current: AC, protection type (IP code): IP22, power: 132 kW (179.47 HP), Equipment: type plate available, Exact type designation: ABB ACS607-0170-3 Iiodsrakqmepfx Ap Djh Output power and output current: 132kW | 260A ° With TEST SEAL! ° Easy to use thanks to the integrated control panel ° Original operating instructions for commissioning included Only 1 more in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready to use.

Condition: used, This listing includes 3 combination steam ovens, convection ovens from the manufacturer Convotherm, type OGS 20.20, gas-fired version without a boiler, manufactured in 2008. Offers for export in a package are preferred. Our ID Nos. 9361 + 9362 + 9363 The units are set for natural gas; they can also be converted to propane gas. The combination steam oven is equipped with a loading trolley for 20 x 2/1 GN containers or 40 x 1/1 GN containers and with insert racks for 2 x 1/1 GN containers. The units are sold in a package, without inspection and warranty, as returned by the customer. Inspection work will certainly need to be carried out for a new start-up. All 3 combination steam ovens are functional, and videos can be provided. The core temperature sensors are in good condition, and a door lock is included because one is no longer functional. Wiring diagrams and documentation are included. The units were exclusively used for heating/regenerating frozen ready meals. You will receive an invoice with VAT shown. Our used equipment service for you: High-quality branded equipment at fair prices Professional refurbishment/inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 Technical data: W x D x H: approx. 1232 x 1055 x 1952 mm Power connection: V: 400 / kW: 2.2 Gas connection: kW: 70.0 Inserts: 20 x 2/1 GN or 40 x 1/1 GN Weight: approx. 403 kg Year of manufacture: 2008 Condition: Used, no inspection Further details: ACS Advanced Closed System (automatic energy-saving system, optimal humidity in the cooking chamber) Crisp & tasty (multi-stage cooking chamber dehumidification in ACS) Press & Go (symbol) for quick selection of defined cooking programs Tray Timer / staggered loading Start time preselection in real-time mode Night baking Delta-T cooking (multi-point core temperature sensor required) Cook & Hold Programmable with 250 cooking programs, each with up to 20 steps CONVOTHERM cookbook with pre-programmed cooking programs Disappearing door: more space and safety Double-glazed door with integrated door locking position Antibacterial door handle with ventilation position and safety function Door handle with automatic closing function Motor brake when opening the cooking chamber door: less steam release Fan with autoreverse function Hand spray with infinitely adjustable settings Multi-point core temperature sensor Height-adjustable device feet Simple operation via menus/icons Bright graphic display Digital rocker switch for easy setting of temperature, time and core temperature Modular processor control with clear display and module self-test RS232 interface Storage of all device settings and cooking programs in an additional memory module Permanent self-diagnosis for error detection System with full-text error description Safety program mode: the device can be operated with limited functionality Basic prison version Robust design in stainless steel Seamlessly welded cooking chamber Rounded cooking chamber corners Suction plate easily removable Hygienic seal Cooking chamber lighting with shatterproof glass cover Including loading trolley with condensate collection tray Subject to change and errors. Iisdpfx Apezvd H Dj Djh The sale is exclusively subject to our general terms and conditions.

Condition: good (used), D No. 13015956 / Serial No. 000038 Input: 3-phase SC 400/480V 7.0A 5.8 kVA 50/60Hz Output: 3-phase AC 0/480V 7.0A 5.8 kVA 0-480Hz Ijdpfx Apoy Tufhe Djih Application: Drive control Width: 98 mm Height: 350 mm Depth: 250 mm Weight: 4.9 kg Condition: good, second-hand

Condition: ready for operation (used), Heidenhain Id. 359 002-01 interface board SN: 11989222A inspected, tested, 100% functional with 3 months warranty, scope of delivery as per photos Iijdpfjy Nqf Nex Ap Deh

Condition: used, mileage: 122,050 km, power: 85 kW (115.57 HP), first registration: 09/2006, fuel type: gasoline, overall weight: 2,850 kg, color: silver, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 4,890 mm, total width: 1,904 mm, total height: 1,990 mm, Equipment: ABS, air conditioning, central locking, navigation system, Internal Vehicle No.: 9713X ----Why autonext? Over 400 immediately available cars & commercial vehicles One of the largest vehicle exhibitions in the region Over 1,000 satisfied customers annually - Top customer ratings Attractive financing & trade-in options Complete vehicle range available at autonext? Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition 1st owner, German vehicle, Non-smoker vehicle Complete service history, only serviced at Volkswagen New brake pads front and rear Body type: Hearse/Funeral vehicle Conversion with coffin system and storage compartments Stolle roll-in system with 1-person sliding floor, lifting device "Hermann Stolle" Navigation system Preparation for reversing camera Parking assistance Cargo area lighting Curtain panels in silver Number of seats: 3 Air conditioning Exterior mirrors electrically adjustable, heated and foldable Upon request, we offer a trailer coupling retrofit for only 599 euros. ---- Special equipment: * Electrical Package 3 * Exterior mirrors electrically adjustable, heated and foldable * Exterior mirrors in vehicle color * Power windows * Audio system: Alpha radio * Floor covering in the cargo/passenger compartment: Rubber * Electrical interface for external use (CAN data bus) * Air conditioning * Paint: Metallic paint * Cargo area partition, high, without window * Spare wheel in driving condition * Heated windshield washer nozzles * Power tailgate closure * Seats in the driver's cab: Double passenger seat * Bumpers painted * Preparation for mobile phone/cell phone * Central locking with remote control Standard equipment: Tailgate with glazing, Rear window heated, Airbag driver side, Anti-lock braking system (ABS) with EDS, Electronic stability program (ESP), Drive type: Front-wheel drive, Exterior mirror aspherical, left, Exterior mirror convex, right, Floor covering in the driver's cab: Rubber, Window in the cargo/passenger compartment: - fixed, rear left, Window in the cargo/passenger compartment: - fixed, rear right, Window in the cargo/passenger compartment: - fixed, front left, Window in the cargo/passenger compartment: - fixed, front right, Transmission 5-speed, Body/Structure: Station wagon Standard, Body variant: Normal roof, Headlight range adjustment, Engine 2.0 L - 85 kW catalytic converter (AXA), Non-smoker package, Wheelbase 3000 mm, Headlights H4, Sliding door cargo/passenger compartment left, Sliding door cargo/passenger compartment right, Power steering, Seat cover / Upholstery: Fabric, Interior lining in cargo/passenger compartment: Wood fiber, Immobilizer (electronic), Permissible total weight 2.80 t. ----MOT/emission test can be done upon request. ----Warranty & "TÜV Profi Check" are of course available with us! We will gladly take your vehicle in part exchange! We will also create an individual financing or leasing offer for you! Without a down payment, redeemable at any time and with special repayments. Please direct your requests to our sales team; we will be happy to advise you. ----Arrange an appointment for a test drive and be convinced by the quality of our vehicles. Appointment arrangements: Mon-Fri from 08:30 - 18:00, Sat from 09:30 - 13:30 Iodpfoydt I Isx Ap Dsih ----Visit us also on We look forward to your visit! ----Errors and omissions excepted. The equipment offered on the internet is not part of the contract. The equipment must be checked on site.

Year of construction: 2007, condition: good (used), PRATI LF 330 Machine Type: Label finishing / inspection rewinder Year of Manufacture: 2007 Serial Number: LF012 Ijdeyrg S Aepfx Ap Dsih Machine Type Code: LF330-C0-N0-T0-0-0P0-5-009 Location: Germany Condition: Used – good working condition Unwinding Unit • Shaft unwinder for self-adhesive label rolls • Pneumatic expanding shaft • Adjustable tension control • Suitable for narrow web label rolls Web Guiding System • Electronic web guiding system for precise web alignment • Edge guiding sensors installed Inspection Table • Large illuminated inspection table • Designed for visual inspection of printed labels • Enables removal of defective labels during the inspection process Slitting System • Razor blade or shear slitting system (depending on configuration) • Adjustable slitters for multiple lanes • Suitable for narrow label formats Rewinding Unit • Differential rewind shafts • Independent tension control for multiple rolls • Designed for rewinding several finished label rolls simultaneously Control Panel • Operator control panel for machine speed and tension adjustment • Emergency stop and safety control system Safety Equipment • CE certified machine • Safety guards and emergency stop systems installed Maximum Web Width: 330 mm Power Supply: 400 V – 3 Phase Frequency: 50 Hz Installed Power (Pn): 3.4 kW Nominal Current (In): 7 A Maximum Current (Imax): 9 A Short Circuit Current (Isc): 120 kA Machine Weight: approx. 2,200 kg Typical Applications • Final inspection of printed labels • Slitting of narrow web label rolls • Rewinding finished labels into customer roll formats • Converting and finishing of self-adhesive labels Advantages of PRATI Finishing Machines PRATI machines are widely recognized in the label converting industry for their robust construction, precise tension control and excellent operator ergonomics. The LF series allows efficient inspection and finishing of label rolls, reducing waste and ensuring consistent product quality before delivery. Thanks to the reliable web guiding and differential rewind system, the machine ensures

Condition: as good as new (ex-display), 800002V2236, TW70, Leybold, turbomolecular pump with external frequency converter Isdpfjvrgdhjx Ap Deih Model: 800002V2236 Type: TW70 Condition: As good as new

Condition: ready for operation (used), Heidenhain 324 955-14 interface board SN: 12 476 309 A, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as shown in the photos. Iiodox Erukopfx Ap Dsh

Condition: ready for operation (used), Heidenhain 324 955-15 interface board SN: 14 037 753, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iiedpfxex Eruwj Ap Doh

Condition: ready for operation (used), Heidenhain 324 955-17 interface board SN: 71 401 350 B, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as per photos. Ijdex Ervuopfx Ap Djih

Condition: ready for operation (used), Heidenhain Id. 324 952-11 interface board SN:8592093A, the item has been fully refurbished and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as shown in the photos. Isdpfex Erx Nex Ap Djih

Condition: ready for operation (used), Year of construction: 2003, sheet width 2520 mm plate thickness 2.50 mm ST thickness at "Niro-steel" 1.50 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm Bending speed ca. 120 Grad/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 total power requirement 7.2 kW voltage 400 V weight 3430 kg Current new price ~ 100.000 euros From a maintenance workshop With very good equipment (!!) Equipment: - CNC electric motor-driven universal swivel bending machine * High-precision mechanics with modern control technology Iisdsxbh Euepfx Ap Doh * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotatable upper beam / as automatic tool change system * With 2x tool stations (sharp and goose foot bending rail) * Reduces set-up and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * Control panel at front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swivel control, front right - Servo converter-controlled drives * for bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electric motorized backgauge * Travel speed 300 mm/sec. - with rear sheet metal support surface, including ball rollers - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Heidenhain DDC2 interface board, ID: 281004-45, serial number: 9813442, used, in good condition, 100% functional. Scope of delivery as shown in the photos. Iedoz Hh Udjpfx Ap Djih

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 075440, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,000 mm, The machine was overhauled in 2022! TECHNICAL DETAILS Measuring range, X-axis: 1,200 mm Measuring range, Y-axis: 2,500 mm Measuring range, Z-axis: 1,000 mm Accuracy MPE E: 2.6 + L/300 µm MACHINE DETAILS Machine height with extended damper: 3,485 mm Machine height without extended damper: 3,470 mm Iedpfx Asz Izdzsp Doih EQUIPMENT CNC control WPC, 3 axes Probing system Renishaw PH10M Scanning probe Renishaw SP25 Scanning kit 2 Probe stylus lengths: 50–100 mm Probe changing rack Renishaw FCR25 Number of probe changing slots: 3 Probe changing rack: not populated Ergonomic handheld control panel HT400 PC system with Windows 10 Professional TFT monitors: 2 × 24 inches WM QUARTIS CNC control geometry software, Version 2025 WM QUARTIS CNC free-form surface applications, Version 2025 WM QUARTIS CNC CAD import interface STEP, Version 2025 USB user dongle with software license Small probe stylus kit M3 Reference sphere PC and controller trolley with desk combination

Condition: used, Year of construction: 1996, functionality: fully functional, Max. roll diameter: 1,300 mm Roll core: 76 / 100 / 152 mm (unwinding), only 152 mm (rewinding) 2 rotogravure stations + inline adhesive coating unit Drying: diathermic oil system, vertical + horizontal tunnels Cooling rollers after each station Control: Siemens S5, DC drives Processes: barrier coating, lamination (paper + aluminum/plastic), inline primer Iisdpfxsz It D Hj Ap Djh CE certified, incl. thermal oxidizer (RTO25) and steam generator (Ferroli)

Condition: used, mileage: 129,780 km, power: 88 kW (119.65 HP), first registration: 05/2022, fuel type: diesel, overall weight: 2,285 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,825 mm, total width: 1,835 mm, total height: 1,859 mm, loading space length: 2,224 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sales excepted! Internal number: 0693. NL58313 ----EQUIPMENT Isdpfxez Ik E Uo Ap Doih * Airbag: Front airbag for passenger - Front airbag for passenger including deactivation function and glove compartment with lid * Trailer hitch preparation - Preparation kit for retrofittable trailer hitch including ESP trailer stabilization (includes trailer module and connection preparation for 13-pin socket) * Roof rails, aluminum - without crossbars * Window, rear, right, fixed (at the height of the 2nd row of seats) * Cruise control - with adjustable speed limiter including multi-function leather steering wheel with 4 spokes in aluminum trim * Heated rear window * Cargo area lighting, LED * MyFord Dock (smartphone holder) * Rearview camera with image display in the interior mirror including parking pilot system at the rear and interior mirror, automatically dimming * Seats: Seat Package 18 - Fabric "Capitol/City" in Ebony (black) - Double passenger seat (with storage compartment under the smaller seat section), variable folding and reclining - Driver's seat, manually adjustable in 3 ways (forward/backward, height, backrest) - Headrests, height-adjustable - Lumbar support, manual (driver's seat) * Socket: 12-volt connection in the cargo/luggage compartment * Partition to the cargo area with through-loading opening and window * Rear window wiper/washer system * Transmission: 6-speed manual * ABS with EBD * Storage compartment with 12-volt connection - under the narrow part of the passenger double seat * Airbag, driver side * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, narrow mirror format * Exterior mirror housings, black * Battery, reinforced * Hill start assist * Floor covering, rubberized, front * On-board computer including outside temperature display * Third brake light * Diesel particulate filter (DPF) with SCR catalytic converter and AdBlue tank * Tachometer * Electronic Stability Program (ESP) with Traction Control (TCS) including Torque Vectoring Control and adaptive load control * Power windows, front, electrically operated - with quick-down function for driver side * Ford Easy Fuel - Comfort fuel filler cap and misfueling protection * FordPass Connect - Information about the current status or location of the vehicle as well as control of selected vehicle functions via the smartphone with the FordPass app - including live traffic information in real time (in conjunction with Ford navigation system including Ford SYNC 3) - including WLAN hotspot * Windshield, heated, including electrically adjustable and heated exterior mirrors * Glove compartment with lid * Interior lighting, front, with delay function * Air conditioning, front, including semi-electronic recirculation mode * Paint: Solid color * Cargo area floor protection, plastic, molded * Cargo area lining, side, half-height * Steering column, adjustable in height and reach * Alternator/generator * Center console, front - open with storage area, 2 cup holders * Fog lights * Emergency brake light - Hazard warning light activation during heavy braking * Radio: Ford Audio System 2 - Radio DAB/DAB+ - Radio (FM/AM) - USB port - Bluetooth interface - Audio remote control on the steering wheel * Sliding door, rear, right * Side protection strips, plastic * Power steering, electro-mechanical EPAS (Electric Power Assisted Steering) * Safety brake assistant EBA - Emergency Brake Assist * Safety belts, front, height-adjustable - Safety belt pretensioners and load limiters, f

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: UC-1871, spindle speed (max.): 3,500 rpm, center width: 635 mm, center height: 115 mm, No minimum price – guaranteed sale to the highest bidder! This is a CNC internal grinding machine, converted from a CNC lathe. TECHNICAL DETAILS Center height: 115 mm Distance between centers: 635 mm Swinging diameter over bed: 380 mm Swinging diameter over removable bed: 520 mm Spindle bore: 75 mm Iedpfez Nithox Ap Deih Max. spindle speed: 3,500 rpm MACHINE DETAILS Control system: Fanuc 0-T Connected power: 15 kW Dimensions (L x W x H): 3,800 x 1,700 x 2,000 mm Weight: 6,000 kg Shipping packages: 2 pcs. EQUIPMENT Documentation

Condition: good (used), mileage: 933,548 km, power: 330 kW (448.67 HP), first registration: 11/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, navigation system, parking heater, power mirror, seat heater, soot filter, spoiler, - Aluminum fuel tank - Brake booster - EPS - Air horn - Particulate filter - Radio/CD player - Sleeper cab - Side door - Seat heating - Auxiliary heater - Toolbox - Xenon headlights Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 7,905 kg Payload: 11,595 kg GVW: 19,500 kg Technical condition: good Optical condition: good Reference number: 79 Vehicle number: 79 Iodpfx Aoz H Ty Sop Doih Mercedes Benz Actros 1845 Big Space / Stand-alone air conditioning / Euro6 .: WDB96340310179577 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Auxiliary heater Distance assist Lane keeping assist Emission standard EURO 6 Special equipment: Lockable storage compartment above the windshield, axle load - measuring device, front axle load 8.0 t, driver's airbag, bi-xenon headlights, headlight cleaning system, CB radio, air horn, suspension: front springs 8.0 t, 2 leaves, additional parking brake on the front axle, info display 12.7 cm with additional display, integral rear, upper comfort bunk, narrow, fuel tank: combination tank aluminum - 820 liters diesel + 90 liters urea solution (AdBlue), cool box / refrigerator, light and rain sensor, air intake behind cab, external storage compartment on the right, air deflector on the roof (lockable) and on the side, enhanced engine brake, parameterizable special module, premium comfort mattress lower, spare wheel, acoustic reversing warning (external warning signal), interface for fleet management system, drawers under the dashboard, circuit breaker, seats in the cab: passenger seat armrest, seats in the cab: driver's seat comfort suspension seat, exterior sun visor, additional 24V socket in the passenger footwell, additional thermal insulation Additional equipment: Emission standard EURO 6, axle configuration: 4x2, Actros 4, trailer socket 24V / 15-pin, work lights, audio system: radio with USB connection, exhaust pipe to the right side, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air tank steel, compressed air unit medium, cab: L BigSpace, cab variant: BigSpace, cab floor level, cab: mounting height 765 mm, cab: tilting device electro-hydraulic, carpet on the engine tunnel, sun visor for side window, driver's door, cab: width 2.50 m, additional 12V socket, compressed air connection in the cab, electric roof hatch, preparation for upper comfort bunk, wide, cab: steel-sprung, comfort, suspension: leaf / air, suspension: front spring seat aluminum, electric windows, tinted windshield, generator 100 A, transmission 12-speed - Type: G 211-12, rear axle bevel gear 440, body/structure: semi-trailer tractor, lower comfort bunk, comfort locking system, communication interface, fender 3-piece, radiator grille, regulated power steering pump, air compressor 2-stage, engine 12.8 L - 330 kW R6 Diesel (OM 471), engine compartment encapsulation, ramp mirror, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger multifunction seat, seats in the cab: driver's seat backrest foldable, voltage converter 24V / 12V 10 A, splash guard front, front axle stabilizer, external storage compartment on the left, socket in the cab 24V, tachograph / EC control unit, door extension for the cab, underbody panelling...

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, cutting length (max.): 3,450 mm, The machine has been completely overhauled by the manufacturer! TECHNICAL DETAILS Sawing unit Cutting height: max. 155 mm Cutting height at 45°: max. 105 mm Saw blade diameter: max. 450 mm Saw blade arbor: 30 mm Swivel range: 0–46° Motor power: 5.5 kW Speed: 3,000 / 4,000 / 5,000 / 6,000 rpm Cutting range Cutting width: 1,250 mm Cutting length: 3,450 mm Sliding table length: 3,200 mm Cross slide and stops Digital folding stops: 3 Cross slide extendable up to: 3,500 mm Positioning accuracy parallel stop: 0.1 mm Isdpoz Irygsfx Ap Djih EQUIPMENT Scoring unit Auto-EPS with electromechanical side and height adjustment Electrically controlled parallel stop Electrically controlled axis adjustment Cross slide with 3 digital folding stops Machine completely overhauled by the manufacturer Sliding table completely re-adjusted Linear guide rail converted to a new digital system with 3 stops Stainless steel scale for angle adjustment renewed Cross slide checked 90° locking of the fence completely renewed Electrical system checked Machine re-adjusted, checked, and lubricated German-language documentation