Used International 1255 for sale (8,918)

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Ndodpfx Aov Ehbbsgzsf Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: Ndedpfxsw Iquye Agzsf -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Condition: used, Used FIB Industriele Bedrijuen BV approximately 11,600 litre stainless steel vertical storage tank. Unit welded dished top and bottom heads. Unit measures approximately 2,100mm diameter x 2,640mm straight side. Internal rated atmospheric design pressure at 135 deg.c. Unit is mounted on legs. Ndjdpjx Nix Iofx Agzef Specifications: Capacity: 3,062 gal Diameter: 6.89' Height: 8.66' Type Of Heads: welded dished Vertical/Horizontal: Vertical Type of stainless: stainless steel Legs/Lugs: Legs Dimensions: Diameter 6.88976 feet and height 8.661415 feet

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) Ndsdewphixjpfx Agzef - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. - Kettle...

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Nodov Sfp Aepfx Agzodf Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW Ndedpfjwwar Isx Agzof

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg Nsdpjrualpofx Agzjdf

Condition: used, Used Becomix model Beco Mini Lab homogenizing mixer.  Manufacturer: Becomix. Capacity: Working capacity maximum of 5 Litres approximately Dimensions: 820mm x 820mm x 1250mm high approximately Pressure: -1/+1 Bar maximum working pressure  internally; 4 Bar maximum working pressure of the external jacket Conical welded bottom with a clamped dish top. Pressure and vacuum sealed by a double acting axial seal rings and cooled by barrier water flow. Bottom entry homogenizer: Power 1.55kW Torque 2.5Nm Weight: Estimated: Kg250.0 Dimensions: 820mm X 820mm Ndedpfjx Nixuox Agzef

Condition: used, machine/vehicle number: YS2S6X2000215xxxx, mileage: 695,038 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 22092 Car specifications: 2018 model Mileage: 695,038 (will check a little) EU approved until: 30.11.26 Euro 6 6x2 650 hp Tires (see pictures) Automatic transmission L ft on 3 axles Full side opening opening on car: 2.94 cm Internal length in cabinet: 6.886 m Internal width in cabinet: 2.496 m Internal height in cabinet: 2,900 m Heating in cabinets 3 rows of lashing rails Brake pads: see picture Clutch plate: 100% Retarder Spring: full air Refrigerator Webasto new Particle filter changed Brake pads on drive shaft changed Clutch replaced 70,000 km ago Air conditioning/ac Radio Light Videos Delivery by appointment   Specifications cabinet beds: 2018 model EU approved until: 10.11.26 4 axles Tires (see pictures) hanger opening: 2.94 cm 3 rows of lashing rails Heating in cupboard (unknown condition) Nedpfxex Ncb Aj Agzsdf Full side opening Delivery by appointment   Description: We have a 2018 Scania S650 6x2 box truck w/ 2018 spoke 4 axle box trailer w/ full side opening for sale. The car is being sold as a set and everything works as it should according to the owner. What needs to be done is the heating in the cupboard. This has not been used by the owner and is in an unknown condition. So errors and omissions may occur and some cost must be taken into account. The car is in weekly operation so the mileage will increase slightly. Delivery by appointment Km: 695038 HK: 649 Technical approved: Yes EU-approved until: 30.11.2026 Own weight: 13500 Euro: 6 Model: S650 6x2 skapbil m/ 2018 ekeri 4 akslet skaphenger m/ full sideåpning se video Gearbox: Automatic

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm !! - hydraulic clamping on table - tool taper for turning: KM63 - 18 000 rpm - HSK 63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position tool changer with 126 tool positions for milling, grinding, drilling List of options mounted on the machine: 1 - 40,000 rpm high-speed spindle 2 - table dia 700 mm with hydraulic clamping 3-150-position tool changer 4 - chip conveyor belt 5 - cooling system with recovery 6 - coolant temperature control 7 - high pressure cooling (40 to 70 bar) by spindle 8 - smoke extraction system 9 - chip collection box 10 - Presetting system and tool integrity: laser and mechanical probe for measuring tools 11 - Renishaw probe Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Wide: 5890 mm Turret: yes Ndedsxtgkaspfx Agzef Qty Tools: 150 positions Coolant pump: yes

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Ndodpfxortrzdj Agzjf Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Used FIB Industriele Bedrijuen BV approximately 3,900 litre stainless steel vertical storage tank. Unit has welded dished top and bottom heads. Internal rated atmospheric design pressure at 135 deg.c. Unit mounted on side supports. Specifications: Ndodpex Nixnefx Agzof Capacity: 1,030.3 gal Type Of Heads: welded dished Vertical/Horizontal: vertical Legs/Lugs: side supports

Condition: used, machine/vehicle number: W1T9630091068xxxx, mileage: 70,000 km, Year of construction: 2024, Please contact ATS Norway for more information Please provide reference number upon request: 21546 Specifications: Km: Approx. 70,000 (may increase) Transmission: Automatic Engine brake Euro 6, 326 hp Full air suspension 4x2 Good tires Ekeri box 18 pallets External height: Approx. 3.95 m Full side opening 2-ton Zepro tail lift Nsdpfxexpdhho Agzodf Remote control Rear view camera Internal length: Approx. 7.6 m Radio/CD Climate control/AC Last service done summer 2025 Service history Delivery by agreement Description:Well-maintained Mercedes Actros 1833 box truck from 2024.The truck has only driven 70,000 km.18-pallet Ekeri box with full side opening.Delivery by agreement. Km: 70000 HK: 326 Technical approved: Yes EU-approved until: 12.03.2026 Own weight: 11140 Payload: 9285 Model: Actros 1833

Condition: ready for operation (used), X-beweging: 6000 mm Y-beweging: 1500 mm Z-beweging: 2000 mm - 2 hoofden - open kolom! - elektrisch gereviseerd in 2010 - Heidenhain digitale uitlezing - Leroy Somer elektra voor afvoer van tafel - frequentieregeling op alle assen - tafelafmetingen: 6000 x 1800 mm Nedjx Nr E Repfx Agzjdf - voldoet aan de huidige (Franse) gezondheids- en veiligheidsvoorschriften - Belasting op de tafel: 18 ton Machine werd gebruikt in de gereedschapswerkplaats van een autofabrikant. Enkele plano freesmachine Korting op een geldbedrag Fresadoras zijn een soort pilaartjes van een kolom

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm Ndsdpfxsrtrvyo Agzef -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, Used BCD Engineering Ltd stainless steel vertical reactor body. Approximately 4,000 litre nominal capacity. Unit measures approximately 1,800mm diameter x 1,700mm straight side. Has welded dished top and bottom heads. Internal rated 10 bar / full vacuum design pressure at -29 to 200 deg.c. External stainless steel coil jacket rated approximately 324 litre capacity, 6 bar / FV design pressure at -29 to 200 deg.C. Unit includes top mounted stainless steel anchor type agitator but no drive/gearbox currently fitted. Unit mounted on side support lugs. Ndjdpfxex Nixhe Agzjf

Condition: used, machine/vehicle number: YS2G6X2000208xxxx, mileage: 375,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 22077 Specifications: 2013 model EU approved until 15.02.2026 Mileage: 375,000 km Euro 5 Wheelbase: 490/135 cm 6x2 480 hp Full air suspension Retarder Internal length: 7.758 m Internal width: 2.454 m Internal height: 2.480 m Ndsdpfox Ip A Dex Agzjf Full side opening Tail lift Remote control Automatic transmission 2 bunks Climate control / AC Radio See video Description: 2013 Scania G480 6x2 box truck with full side opening.Four air tanks have been replaced on the vehicle.Delivery by agreement. Km: 375000 HK: 480 Technical approved: Yes EU-approved until: 15.02.2026 Own weight: 13120 Total Weight: 27000 Payload: 13805 Width: 255 Length: 1020 Inside width: 245 Inside lenght: 775 Inside hight: 248 Euro: 5 Model: 2013 Scania G480 6x2 skapbil med full sideåpning. Gearbox: Automatic

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Ndjdpewxz D Uofx Agzsf Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Nedpfx Agortryyjzsdf Fire Suspension Sysem Chiller Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min

Condition: used, Comprehensively tested and refurbished used Winkworth model RT400 316 stainless steel high speed ploughshare (T-Arm) mixer. Material: Stainless steel (316) Capacity: 400 litre (Product Dependent) Mixing Chamber: 1,300mm Long x 800mm Diameter Discharge Type: Centre Bottom Pneumatically Operated Flap Discharge Valve Type Of Blades: T-Arm Blades Motor: 22kW SEW Geared Motor Also includes: (1) Stainless Steel Side Entry Refiner Driven by a 7.5kW Motor. Provision for a Second Chopper. A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Motor Power: 22 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 10.057 Vacuum Internal (Y/N): N Jacket (Y/N): N Nedpfxox Niwws Agzedf Dimensions: 1300mm Long x 800mm Diameter

Condition: used, machine/vehicle number: W09SCUH3NDEN1xxxx, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 20702 Specifications: - 2013 model - 3 axles - Lift on 1 axle - Repair item - Internal height: 2.693 m - Internal length: 13.610 m - Internal width: 2.491 m - Lashings - Manual sliding roof - Full side opening - Ready for delivery Description: We have a 2013 HRD 3 axles capitol trolley repair item w/ full side opening for sale. The trolley is sold as a repair item as it is not EU approved and some additional costs must be expected. Ready for delivery Technical approved: no EU-approved until: 01.04.2025 Own weight: 8340 Nsdpfx Agjwqwnmozsdf Total Weight: 45000 Payload: 36660 Width: 255 Length: 1388 Model: 3 akslet kapelltralle ekt m/ full sideåpning

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: Ndjdpfx Aortrxijgzjf * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Nodpfx Asx Niv Hsgzjdf

Condition: used, machine/vehicle number: WDB9630201034xxxx, mileage: 269,220 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21642 Specifications: 2019 model 269,220 km (I want to know a little) Euro 6 engine 6x2 530 hp Automatic transmission Spring: full air Tires (see pictures) Refrigeration/freezing unit Zepro lift w/ remote control Longitudinal partition wall Objection length: 8,531 m Internal width: 2.493 m Internal height: 2,740 m P building: bus building Nedpjxq A T Eofx Agzsdf Lift and swing on 3 axles Refrigerator Diesel heater Hang on. leather seats Air conditioning/ac Light Radio Ready for delivery Description: We have a 2019 Mercedes-Benz Actrox 6x2 box truck w/ refrigerator/freezer unit for sale. The car is in weekly operation and the mileage will therefore increase slightly. All services and maintenance are carried out at the workshop. There is also a service agreement on the generator. The starter motor and brakes on axle 2 have been replaced. Everything works as it should, according to the owner. Ready for delivery Km: 269220 HK: 530 Technical approved: Yes EU-approved until: 09.03.2026 Own weight: 14700 Euro: 6 Model: Actrox 6x2 skapbil m/ kjøl/frys aggregat Gearbox: Automatic

Condition: used, Used Westfalia model CSA1-06-475 stainless steel clarifier centrifuge. Self cleaning bowl in steam sterilizable design. Internal pressure rated 1.5 bar pressure at 127 deg.c. Capacity rated approximately 13 litre. Unit includes 1.5kw, 1415rpm drive. All mounted on skid. Includes tools Ndsdpfx Aex Nivyogzef