Used Itec for sale (394)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: Itjdpfx Agew U N Ixezer The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Isdjwb E Sbepfx Agzetr

Condition: used, functionality: unexamined, #LSV1120 WISSNER - CNC Controlled Milling Machine Itedpew Evn Uefx Agzjr WITEC 2015 Economic Travel Range: 2,050 x 1,650 mm Vacuum pump for material fixation and spindle water cooling Extraction system: EUROSOG HDM61 2.2 kW / 400 V, year of manufacture: 2005 Custom-built dust collection container Control system replaced in 2014 incl. servo motors, 222 PLUS: RECKERTH high-frequency spindle, type RF-HSK-F40 12 kW, max. 36,000 rpm T-spindle for CNC milling machine Original price: €12,000 Location: 52222 Stolberg (Rheinland), Germany The machine must be collected by the buyer at 52222 Stolberg. Sale on behalf of customer Additional photos available on request. Feel free to send us your price offer. Reasonable counteroffers will be considered. Please include your full contact details when making inquiries! You are also welcome to inspect the machine on site. Please call us to arrange an appointment. A small note in advance: The item comes from insolvency proceedings and therefore shows signs of use. Maintenance and professional cleaning are the responsibility of the buyer. The sale is made without any warranty. Any guarantee, liability, reduction, or rescission is expressly excluded. An on-site inspection is recommended as the purchase is 'as seen'. All information provided without guarantee. Errors and changes reserved. The item is sold as inspected on site, in used condition, under retention of title and with the exclusion of any warranty for visible and hidden defects, in particular defects relating to technical condition, quality, performance, or usability. Due to time constraints, we will only respond to serious inquiries and price offers! This is solely an advertisement for information purposes. Inspection strictly by appointment! For questions and interest: +49 152 31381635 Mr. Raum Best regards

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: CH 1295172, Manufacturer: Jung Do Tech Co., LTD (South Korea) Model: HI TECH 450 Serial number: CH 1295172 Year of manufacture: 2016 Technical data: Isdpfjv Ex Hhjx Agzjtr • Link width: 210 mm • Main chain: RF 2060R • Engine power: 0.4 kW

Condition: used, mileage: 109,053 km, power: 96 kW (130.52 HP), first registration: 06/2019, fuel type: diesel, empty load weight: 2,481 kg, maximum load weight: 1,019 kg, overall weight: 3,500 kg, wheelbase: 3,750 mm, color: white, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 6,704 mm, loading space length: 4,100 mm, loading space width: 1,700 mm, loading space height: 2,000 mm, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, soot filter, traction control, Rear step, interior paneling, wooden loading floor, passenger double seat, length type L4, height type H3, high roof, roadworthy, sun visor, partition wall, lumbar support, clock & rev counter, heat-insulating glass, iPad/iPod connection, 5-door, 1st hand, full service history, green environmental sticker (4), spare wheel, steel rims, new inspection, reversing camera, black, 6-speed gearbox, sliding door right, parking sensors front, parking sensors rear, parking sensors, parking aid, parking aid camera, traction control, electric windows, radio, radio/MP3, MP3 interface, radio/CD, outside temperature display, tinted glass, heated exterior mirrors, power steering, electric exterior mirrors, brake assist, speed limiter, comfort seats, rear-wheel drive, 3rd brake light, center armrest, country version Germany, new MOT/AU, cornering light in headlight, storage in the roof lining of the driver's cab, radio with Multi-function display, multifunction steering wheel, USB port, AUX port, indicator light integrated in exterior mirror, roof lining in the passenger compartment, hill start assist, electric windows, cruise control, grab handle on the B-pillar, air conditioning, high load compartment partition behind the driver and front passenger, leather-covered steering wheel, adjustable steering column, side marker lights, front and rear parking sensors with rear view camera (color display), fog lights, spare wheel in standard tires, seat package 13, height-adjustable driver's seat, driver's seat with lumbar support, front armrests, folding table integrated in the passenger double seat, storage compartments under the seat bench, daytime running lights, integrated rear step, central locking with remote control, Express Line package, wooden floor in the load compartment, plastic paneling in the load compartment, lashing rails on the sides of the load compartment, rear wing doors with 270-degree opening angle, LED load compartment light, visibility package 1, heated windshield, electric exterior mirrors, exterior mirrors heated, Bluetooth hands-free system, Bluetooth audio streaming, Spr Itodpowfykaefx Agzjr

Condition: used, Year of construction: 2018, Operational unit! Iodowctqbspfx Agzstr Ask for additional information!

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! Itsdpfxouggb Ds Agzer As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning length: 400 mm, turning diameter over cross slide: 580 mm, turning diameter: 210 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 62 mm, travel distance X-axis: 168 mm, travel distance Z-axis: 440 mm, overall weight: 4,200 kg, HWACHEON Hi-TECH 100A Year 2000, excellent condition! Control: MITSUBISHI MELDAS 64 Swing diameter over bed: 580 mm Swing diameter over cross slide: 466 mm Max turning length: 400 mm Max turning diameter: 280 mm Travels X-axis travel: 168 mm Z-axis travel: 440 mm Spindle speed: 40–4000 rpm Chuck size: HOWA 170 mm Itedpfx Ajwum Rrogzer Spindle bore: 62 mm Turret tool positions: 12 stations Tailstock Quill travel/stroke: 100/120 mm Quill taper: MT#4 Tool measurement probe Chip conveyor Hydraulic tailstock Documentation Tools Option for bar feeder operation Very fast and precise machine. Fully overhauled.

Condition: excellent (used), two bottom heads one side - right head heads with 21 spindles spindles span 32mm Ijdpfxow Ad Tgj Agzotr motors 3x1,1kW 2 pneumatic pressure regulation of span between heads right/left spindles

Condition: used, mileage: 98,823 km, power: 96 kW (130.52 HP), first registration: 06/2019, fuel type: diesel, empty load weight: 2,481 kg, maximum load weight: 1,019 kg, overall weight: 3,500 kg, wheelbase: 3,750 mm, color: white, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 6,704 mm, loading space length: 4,100 mm, loading space width: 1,700 mm, loading space height: 2,000 mm, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, soot filter, traction control, Rear step, interior paneling, wooden loading floor, passenger double seat, length type L4, height type H3, high roof, roadworthy, sun visor, partition wall, lumbar support, clock & rev counter, heat-insulating glass, iPad/iPod connection, 5-door, 1st hand, full service history, green environmental sticker (4), spare wheel, steel rims, new inspection, reversing camera, black, 6-speed gearbox, sliding door right, parking sensors front, parking sensors rear, parking sensors, parking aid, parking aid camera, traction control, electric windows, radio, radio/MP3, MP3 interface, radio/CD, outside temperature display, tinted glass, heated exterior mirrors, power steering, electric exterior mirrors, brake assist, speed limiter, comfort seats, rear-wheel drive, 3rd brake light, center armrest, country version Germany, new MOT/AU, cornering light in headlight, storage in the roof lining of the driver's cab, radio with Multi-function display, multifunction steering wheel, USB port, AUX port, indicator light integrated in exterior mirror, roof lining in the passenger compartment, hill start assist, electric windows, cruise control, grab handle on the B-pillar, air conditioning, high load compartment partition behind the driver and front passenger, leather-covered steering wheel, adjustable steering column, side marker lights, front and rear parking sensors with rear view camera (color display), fog lights, spare wheel in standard tires, seat package 13, height-adjustable driver's seat, driver's seat with lumbar support, front armrests, folding table integrated in the passenger double seat, storage compartments under the seat bench, daytime running lights, integrated rear step, central locking with remote control, Express Line package, wooden floor in the load compartment, plastic paneling in the load compartment, lashing rails on the sides of the load compartment, rear wing doors with 270-degree opening angle, LED load compartment light, visibility package 1, heated windshield, electric exterior mirrors, exterior mirrors heated, Bluetooth hands-free system, Bluetooth audio streaming, Spr Itsdpswdh Rrjfx Agzsr

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036683, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (order 38670011) (machine no.: 61036683, new, year of manufacture 2013) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 1600 Iedpeugfupefx Agzstr  Mold opening force, max kN 120  Clear width (h x v) mm 570 x 520  Clamping platen (h x v) mm 770 x 720  Tool installation height min. - max. mm 200 - 500  Opening width mm 950  Mold opening stroke max. mm 450  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 33 / 33  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 1200 SPRING UNIT  Screw diameter / type mm 50 / standard  Effective Ls/D ratio 20.2  Injection pressure bar 1892  Stroke volume cm³ 393  Shot weight at max. stroke for PS g 358  Injection speed mm/s 200  Injection flow rate cm³/s 393  Screw drive/speed 1/min 267  Plasticizing flow (standard screw)4) g/s 36.5  Nozzle contact force kN 42 ELECTRICAL PARAMETERS  Connected load kW 31.2  Installed heat output kW 15.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 9.7  Length x width x height m 5.65 x 1.82 x 1.95 ADDITIONAL EQUIPMENT  Open nozzle  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Euromap interface handling E18  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression molding circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036940, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (order 38670011) (machine no.: 61036683, new, year of manufacture 2013) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 1600  Mold opening force, max kN 120  Clear width (h x v) mm 570 x 520  Clamping platen (h x v) mm 770 x 720  Tool installation height min. - max. mm 200 - 500  Opening width mm 950 Itjdpfx Ajugfw Degzsr  Mold opening stroke max. mm 450  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 33 / 33  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 1200 SPRING UNIT  Screw diameter / type mm 50 / standard  Effective Ls/D ratio 20.2  Injection pressure bar 1892  Stroke volume cm³ 393  Shot weight at max. stroke for PS g 358  Injection speed mm/s 200  Injection flow rate cm³/s 393  Screw drive/speed 1/min 267  Plasticizing flow (standard screw)4) g/s 36.5  Nozzle contact force kN 42 ELECTRICAL PARAMETERS  Connected load kW 31.2  Installed heat output kW 15.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 9.7  Length x width x height m 5.65 x 1.82 x 1.95 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface pneum. Cascade 4-fold  Euromap interface handling E18 + E67  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Electrical preparation for hydraulic auxiliary unit  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression molding circuit  Graphic analysis package  Swivel device for injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating Iedpfoud N Hdsx Agzjtr  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750 Iodpoud H Dmofx Agzstr  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: ready for operation (used), Binder Bivitec Screening machine Brand: Binder Itsdpfx Agjw Uqhtszjr Type: Bivitec flip flop Surface: 9500 x 1900 mm – 1 Deck Driving: E-motor 30 kW

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: CN5ED08442, Nitech Pol Eko CLN 53 laboratory incubator, year 2007, serial number: CN5EC07031 Applications: - Incubation of samples for microbiological determinations; - Analysis of the thermal resistance of the samples subjected to higher temperatures; - Antibodies; - Bacterial tests; - Crystallization observations; - Cultivation of thermophilic microorganisms; - Pharmaceutical stability tests; - Food industry distorting tests. Specifications: - Working capacity: 56 kg; - Temperature range: + 5 ° C above ambient temperature ... + 100 ° C; - Acid-resistant steel interior; - Door with horizontal opening; - Self-diagnosis; - System for restoring the work schedule in case of power failure; - Alarm based on temperature sensor - Natural air convection; - Number of interior shelves: 2, with adjustable height. Dimensions [mm]: - Ext. Width: 590 - Ext height: 700 - Ext depth: 620 - Int width: 400 - Int height: 390 - Depth int: 360 - Weight [kg]: 50 - Voltage: 230V 50Hz - Power [W]: 450 Impeccable functional and aesthetic condition. Price 900 Euro + VAT, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare Isdpfx Aofiav Ujgzjtr We speak English. /Wir sprechen Deutsch/Beszélünk magyarul/Nous parlons français/Vorbim romana.

Condition: used, mileage: 687,000 km, power: 240 kW (326.31 HP), first registration: 09/2011, fuel type: gas, number of seats: 54, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Green environmental sticker, natural gas (CNG), ZF automatic transmission, Euro V engine, standing capacity: 87, ABS, ASR, kneeling, retarder, air conditioning, auxiliary heating, loudspeaker, microphone, number of seats: 47 + 1, with 6 folding seats, high-strength seats (velour), 1 stroller space, 1 wheelchair space, grab bar, double glazing, air doors front, middle, and rear, mobitec matrix, passenger monitoring camera, electrically adjustable exterior mirrors, wheelchair ramp, 3-door, vehicle may be covered with advertising and/or lettering. Itsdpfxjvnmtze Agzer Other identical vehicles available! Approx. 30 units in stock. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: used, mileage: 1,054,617 km, power: 300 kW (407.89 HP), first registration: 06/2013, fuel type: diesel, number of seats: 60, gearing type: automatic, emission class: euro5, color: silver, brakes: retarder, Equipment: ABS, air conditioning, parking heater, +++Wheelchair lift+++ +++3-point belts on every seat+++ Mileage according to speedometer Engine: Mercedes-Benz Emission class: Euro 5 Gearbox: Automatic Seats: 57+2+1 sleeper seats with 3-point seat belts _____ Safety and security * Retarder * Cruise control * ABS, ASR, EBS * Fog lights * Reversing camera Passenger compartment * Auxiliary heating * Wood floor look * Air conditioning * Curtains * Luggage racks * Jet ventilation * Reading lamps * Double glazing * Head leather inserts * Pushchair space * Wheelchair space * Wheelchair ramp * Request to stop Itsdpfx Agormlu Ajzsr * Interior camera Exterior * Matrix brand: Mobitec * Double-width door * Lifting / lowering system * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Roof hatches, fans, roof ventilator Audio & communication * Radio / CD Miscellaneous * Vehicle dimensions: Length 14.92 m, width 2.55 m, height 3.00 m * Twin tires * Hubcaps * Tires: VA 60%, MA 60%, HA 20% * Our internal vehicle number: 10175 Errors excepted. Pictures and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: ready for operation (used), Year of construction: 2023, General Data Machine weight 545 kg Main Drive Spindle speed range 24000 Spindle motor power 4.0 kW Number of axis 3 Movement X-Axis Movement 900 mm Y-Axis Movement 600 mm Z-Axis Movement 200 mm Additional Equipment Accessories: Electronic handwheel, Gigabit network switch (5 ports) This 3-axis T-Rex Servo-0609 was manufactured in 2023. It features a CNC portal milling machine with a KinetiC-NC control system and PC software. The travel dimensions are 900 mm (X) × 600 mm (Y) × 200 mm (Z). It includes a Hiteco 4.0 kW ATC spindle, air-cooled, with a 24,000 rpm and an automatic 4-fold tool changing station. Consider the opportunity to buy this T-Rex Servo-0609 gantry milling machine. Contact us for more information about this machine. Application Types Itjdsx H A Nnjpfx Agzor Milling

Condition: used, Year of construction: 2010, Technical Specifications & Performance Data This Pentablock Filling Monoblock combines rinsing, filling, and closing in a single compact rotary frame for glass bottle handling. Manufactured by Mondial, the LD 16-16-3E/PK-1RF-1V configuration delivers robust mechanical design with precise bottle control across the rinsing, filling, and capping turrets. It is suitable for second hand installations and integration into a used bottling line focused on beverage production and industrial packaging. Model: LD 16-16-3E/PK-1RF-1V Bottle materials: Glass Bottle formats: Compatible with 0.33L and 0.75L bottle formats Rinser turret: 16 grippers (rotary) Filler turret: 16 valves, gravity/light depression technology Closures supported: Crown cap, champagne-style mushroom cork HMI: Siemens OP73 Micro Typical applications: Wine and specialty beverages in glass Advanced Automation & Control Systems The monoblock features an integrated automation architecture with a user-friendly HMI for setup, format recipes, and diagnostics. Line operators benefit from clear alarm messaging and guided procedures that reduce downtime and facilitate changeovers between formats and closure types. The control system supports coordinated motion across turrets to maintain stable product handling and consistent fill accuracy. Siemens OP73 Micro HMI for monitoring and control Programmable format parameters for different bottle sizes Interlocked guards and safety logic for operator protection Itodpfx Agsx Ivq Ijzor Quick adjustments for height and starwheel changeovers Production Line Integration Capabilities Engineered to operate as a standalone monoblock or integrated within a complete used bottling line, this machine accepts infeed conveyors and outfeed conveyors for seamless connection to upstream and downstream equipment such as labelers, inspectors, and packers. Its rotary architecture accommodates format parts for multiple glass bottle sizes and closure types while maintaining consistent throughput and gentle handling. Inline integration with standard conveyor systems Multi-format capability: 0.33L and 0.75L glass bottles Closure flexibility: crown cap and champagne-style cork Suitable for wine-focused beverage production environments Machine Condition & Maintenance History The machine is presented as ready for operation with a commercial focus on reliable second hand bottling equipment. Standard preventive maintenance points are accessible, with clear procedures for scheduled inspections and sanitation to maintain consistent quality. Operational status: ready for operation Routine access for inspection and cleaning Supports sanitization of product-contact parts Operational Performance & Versatility This monoblock is designed for glass beverage applications requiring high-quality rinsing, accurate gravity/light depression filling, and robust closure application.

Condition: used, mileage: 652,926 km, power: 243 kW (330.39 HP), first registration: 01/2012, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, green environmental sticker, Euro V EEV engine, VOITH transmission, ABS, ASR, kneeling function, retarder, cruise control, digital tachograph, air conditioning, Webasto auxiliary heating, speakers, microphone, stereo system with radio, CD player, front air door and wide center door, standing places: 28, number of seats: 53 + 1, high-strength seats, exchangeable platform, roof luggage rack, grab rail, single glazing, ski basket mount, wheelchair access ramp, seat belts, Mobitec matrix display, 2x roof hatches, electrically adjustable exterior mirrors, vehicle may have advertising stickers and/or lettering. Our offer is generally without new TÜV (roadworthiness) inspection. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops! Vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this vehicle. Ijdpfx Agexgz Efjzetr Please contact us!

Condition: used, Year of construction: 2008, operating hours: 34,590 h, Used Aseptic Filling Machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This second hand Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler engineered for industrial packaging and beverage production. Configured for Tetra Brik Aseptic 1000 ml (Base) packs, it delivers reliable, continuous operation for UHT milk, juices, and other shelf-stable beverages. With a nominal capacity of approximately 7,000 packs/hour, this used bottling line component combines high throughput with aseptic integrity for modern carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model: A3/Flex 150V TBA 1000B Ijdox H Thuepfx Agzotr Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (Base) Nominal speed: ≈ 7,000 packs/hour Working hours: ≈ 30,000 hours Utilities Electrical: 400 V, 50 Hz, 3-phase Installed power: up to ≈ 50 kW (typ. 35–50 kW depending on configuration) Compressed air: 6–8 bar, ≈ 300–500 Nl/min Water/steam: ≈ 0.5–1.0 m³/h (for processing/sterilization utilities) Dimensions & Weight Approximate footprint (L × W × H): 7 × 3 × 4.5 m Approximate weight: ≈ 7,000 kg (model range 6,000–8,000 kg) Note: Technical values are indicative for this A3/Flex configuration and should be confirmed during inspection/FAT. Advanced Automation & Control Systems The A3/Flex platform features OEM PLC-based control with a touchscreen HMI for recipe handling, alarms, and diagnostics. Motion control synchronizes forming, filling, and sealing cycles to maintain aseptic integrity and packaging quality at high speeds. Typical capabilities include: Recipe management for UHT milk, juices, and beverage variants Integrated process supervision and event/alarm logs I/O provisions for upstream/downstream line devices Recommended verification prior to start-up: PLC functions, valve actuation, pump performance, and seal integrity Production Line Integration Capabilities This aseptic carton filler integrates efficiently within a used bottling line or new beverage production layout: Upstream: packaging material feed and sterilization modules as per OEM design Downstream: conveyors to accumulation, straw/cap applicators, case packers, palletizers Utilities/process: interfaces for CIP/SIP connection to plant systems, sterile air, water, and steam Controls: standard digital/analog I/O and fieldbus-ready architecture depending on configuration Ideal for second hand industrial packaging projects requiring aseptic carton formats and stable high-speed operation. Machine Condition & Maintenance History Condition: used, currently in storage Approximate machine hours: ≈ 30,000 Operational note: continuous production achievable with proper preventive maintenance Recommended checks before commissioning: pumps, aseptic valves, PLC functionality, elastomers and seals Routine inspection, replacement of wear parts, and validation of aseptic barriers are advised prior to restart.

Condition: used, mileage: 723,362 km, power: 243 kW (330.39 HP), first registration: 01/2012, fuel type: diesel, number of seats: 54, gearing type: automatic, next inspection (TÜV): 01/2025, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Green environmental sticker, Euro V EEV engine, gearbox type VOITH, ABS, ASR, kneeling, retarder, cruise control, digital tachograph, air conditioning, Webasto additional heating, loudspeaker, microphone, stereo system with radio, CD player, air doors at the front and wide middle door, standing places: 28, number of seats: 53 + 1, high-strength seats, interchangeable platform, roof luggage rack, grab bar, single glazing, ski basket holder, wheelchair ramp, seat belts, mobitec matrix, 2x roof hatch, electrically adjustable outside mirrors, vehicle can be covered with advertising and/or labeled. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Itjdpjwd Dgpsfx Agzsr

Condition: used, Year of construction: 2009, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History Ijdox H Tgdspfx Agzetr The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts.

Condition: used, Year of construction: 2004, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it reaches up to 13,000 bottles per hour, supporting scalable output for medium to high-speed lines. The machine is optimized for PET containers and is suitable for diverse beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and streamlined changeovers. Designed as a versatile component for a used bottling line or as a standalone blow molder, this second hand system delivers precise preform handling and stable heating, coupled with efficient blowing performance. It features an Alaska thread finish, an 8-cavity configuration, and a clockwise work direction, making it a proven choice for beverage production and industrial packaging where uptime and repeatability are critical. Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Manufacturing year: 2004 Configuration: Rotary Maximum speed: 13,000 bph Container material: PET Current bottle format: 0.5L No. of cavities: 8 Itodpfx Ajx H Tf Togzer Thread/neck finish: Alaska Max container height: 350 mm No. of grippers (inlet–outlet): 6 No. of mandrels: 180 Work direction: Clockwise Working plane height: 1470 mm Electrical supply: 400 V, 3-phase, 50 Hz Operating current: 331 A Operating pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation & Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and fast diagnostics. The control architecture supports stable preform heating profiles, accurate blowing cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are integrated into the guarding and access points to support consistent production with minimized downtime. Production Line Integration Capabilities This blow molding machine can operate as a standalone unit or integrate seamlessly into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Format changeovers are streamlined around the 8-cavity rotary platform, and the Alaska neck finish provides compatibility for a wide range of closures and filling monoblocks across beverage production. Machine Condition & Maintenance History The machine is available in multiple supply configurations: as-is, refurbished and guaranteed, or ready for operation with compatible spare parts.