Used Tecno for sale (115)

Condition: excellent (used), Year of construction: 2013, Spirale Tecno pool TW 450 Teknoice Race - Track (Year 2013) compressor bitzer 60+60HP Iodpfx Abjzdakpoveic in very good condition ready to move

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: Ip331200, Spirale Tecno pool TW 450 Teknoice Race - Track (Year 2013) Ready to move in very good condition Compressore bitzer 60+60 HP Iedpfx Abezdagwoveic

Condition: like new (used), Year of construction: 2011, operating hours: 370 h, functionality: fully functional, continuous power (apparent): 500 kVA, rotational speed (max.): 1,500 rpm, Tecno-Gen diesel generator powered by an FTP IVECO CUSOR 13 diesel engine. Coupled to a Brushless MeccAlte alternator. Power: 417/500 kVA, 400 volts, 50 Hz, 1500 rpm. Equipped with a tropicalized, water-cooled radiator mounted on the engine. All components are housed in a soundproof and waterproof enclosure. Control panel and day tank are integrated. Built in 2011, with only 370 operating hours. This emergency backup generator set, which has been very well maintained and is in excellent condition, is now available. Iedpfx Aoy Tqblebvjic

Condition: good (used), Year of construction: 2006, Manufacturer: TECNO VIBRAZIONI - year of manufacture: 2006 Isdpfxopl Ttcs Abvsic - type: 28482 - overall dimensions: 2100x900x2900mm - strap width: 200mm - receiving size: 700x700mm - issue size: 200x130mm - transport speed: 6.0 m/min - electrical data: 400V; 0.18W; 0.7A

Condition: used, Hydraulic horizontal clamp Iiodpfxjy Ud Rpj Abvec

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Iiedpoy N Df Nofx Abvsc

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts one unique panel) - Minimum length of the workpiece: mm 250 (ca.) - Maximum length of the workpiece: mm 2700 (ca.) - Minimum width of the workpiece: mm 124 (ca.) - Maximum width of the workpiece: mm 1200 (ca.) - Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) - Max feeding speed: m/min 50 (ca.) - Total installed power Kw 82 Along with the following groups: POS. 1 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 2 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 3 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 4 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 5 Lower main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) POS. 6 Upper main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) Iiedpfx Absyx S N Uovsc OPTIONAL: soundproof and safety enclosure (cabine)

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding wheel diameter: 200 mm, disc diameter: 200 mm, We are offering this well-maintained Tecno Wasino Meister G3 surface grinding machine, year of manufacture 2004. Grinding wheel diameter: 200 mm Additional spindle – see picture Iiodjylv Uaopfx Abvjc If you have any questions or need more information, please feel free to send us a message or give us a call.

Year of construction: 2016, condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Ijdpfxon R Nhqe Abvsic

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Used, no warranty Iodpfx Abotw Szasvoic This machine is located in Tata, Hungary. What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: used, functionality: fully functional, mileage: 195,000 km, power: 92 kW (125.09 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 2,760 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space volume: 6 m³, Year of construction: 2013, operating hours: 421 h, Equipment: ABS, immobilizer system, Garbage truck: - Iveco - 35C13 - First registered: June 17, 2013 - Approx. 195,000 km (not readable) - 421 working hours - 6-speed manual transmission - 4-cylinder Iveco diesel, 2287 cc; 126 hp, Euro 5 - Unladen weight: 2,760 kg; Gross vehicle weight: 3,500 kg - 568 cm long - Yellow light - 3-seater - Electric rear axle - Electric adjustable heated mirrors - Rear view camera - Air suspension rear axle - Twin tires - Timing belt and water pump recently replaced Waste body: - TECNO - URBIS 6 - 6 m³ divided steel container - Tipper with hydraulic support - Bin lifter - Side loading flaps left/right First-hand vehicle Iodpfx Aev Uyiiebveic Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: ready for operation (used), functionality: fully functional, The Tecno Fluss VM 5000, manufactured in 2003 and identified by serial number 913, is an ideal solution for automating the dispensing of liquid or semi-solid products. This versatile model facilitates the precise dosing of various creams, sauces, and pastes. Furthermore, its ergonomic design reduces manual intervention, thereby increasing production rates. Iedpewdv Ryjfx Abvsic Furthermore, the intuitive operation of the Tecno Fluss VM 5000 allows operators to easily adjust parameters, ensuring a consistent flow. Each portion remains uniform, even at high production rates. Furthermore, the use of stainless steel components enhances its robustness and simplifies maintenance. As a result, this machine helps reduce the risk of contamination while extending its lifespan. Furthermore, the robustness of this dispenser meets the rigorous standards of the food industry. In addition, its compact design facilitates its integration, whether in a confined space or within a complete production line. In short, the Tecno Fluss VM 5000 represents a strategic investment to improve dosing accuracy, increase productivity, and reduce operational costs. This ensures consistent quality and significant time savings in your manufacturing processes. Technical specifications: Adjustable production speed to accommodate high throughput Stainless steel construction to maintain optimal hygiene Intuitive control for simplified use Dosing system suitable for liquid and semi-solid products Estimated power: approximately 3 kW depending on configuration OWYSnISl

Year of construction: 2002, condition: ready for operation (used), Built in 2002 Speed max 100 c/min Iiodpfxsd Hgute Abvjc

Condition: used, functionality: fully functional, mileage: 27,346 km, power: 140 kW (190.35 HP), first registration: 03/2008, fuel type: diesel, empty load weight: 4,540 kg, overall weight: 7,500 kg, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: automatic, suspension: steel, loading space volume: 8 m³, Year of construction: 2008, operating hours: 2,187 h, Equipment: ABS, Garbage truck: + Isuzu + NOR Smoother Q75.Y07 + First registration: 27.03.2008 + 27,346 km; 2,187 operating hours + Diesel engine, 5,193 cc, 190 hp + Automatic transmission + Twin tyres + Unladen weight: 4,540 kg; gross permitted weight: 7,500 kg + 577 cm length + 3-seater + Radio/CD + Electric windows Body: + TECNO Iisdpfjwu Etfsx Abvoc + Type: Azimut 8 + 8 m³ container + Rear tipper with hydraulic support + Bin lifter + Compactor + Reversing camera + Warning beacons Vehicle from first owner Receive all our newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Isdpfozcwitex Abvoic Full documentation for equipment available.

Condition: used, axle configuration: 3 axles, first registration: 11/2021, loading space length: 7,000 mm, loading space width: 2,340 mm, loading space height: 1,730 mm, total length: 8,500 mm, total width: 2,550 mm, total height: 3,500 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Notes = Number of axles: 3, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Alloy wheels, Suspension type: Full air, ABS, EBS, Body construction year: 2021, Body material: Steel, Number of sides: 1 side, Tipper drive: PTO, Drum volume: 28, Drum volume in: m3, Axle type: SAF, ELECTRIC ROOF 26M3 27M3 = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 11 mm; Tire tread depth right: 10 mm Axle 2: Tire tread depth left: 1 mm; Tire tread depth right: 4 mm Axle 3: Tire tread depth left: 14 mm; Tire tread depth right: 1 mm Environment Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: €422 per month (default, 60 months); Ask for further information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Iodpfx Abjzdp Nyjvsic Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CMS Tecnocut Milestone 2040 Axis-Movement: X-Axis: 4.250 mm Y-Axis: 2.000 mm Z-Axis: 350 mm included options: Iiodpszdbrnefx Abvec - 2x 3-axis cutting head - Height sensor with anticollisionsensor - Software IGEMS - Automatic tank cleaning - Big Bag Abrasivtank and automatic abrasive doser

Condition: good (used), Code: 0399 Brand: TECNOMAX SCM Model: ST 4 ELITE - CE Standard Saw spindle moulder with tilting blade and scoring unit and tilting spindle moulder for carpentry, furniture, wooden window frames, doors, panels and various - CE Standard Iedpfx Abozbmvaeveic Technical data: Squaring carriage length 3200 mm Blade inclination 90-45 degrees Max saw blade diameter with scoring unit mounted 315 mm Max saw blade projection from the table at 90°/45° mm 100/70 Cutting width at parallel guide 1000 mm Scoring unit blade diameter 100 mm Workpiece clamping press Tilting Spindle moulder 90-45° Useful spindle length 125 mm Spindle rotation speed rpm 3500/6000/8000/10000 Max tool diameter 210 mm Tenoning table and head Electrical connection and removable support for the feeding Three-phase motors 5,5 Hp Suction inlet diameter mm 120 Overall dimensions of assembled machine mm 3600 x 3000 x 1100 h Overall dimensions for transport mm 3600 X 1600 X 1100 h Weight kg 645

Condition: new, Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Iiedpjy H Hbnjfx Abvec Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: good (used), functionality: fully functional, For sale is a cylinder head resurfacing machine/cylinder block milling machine in good condition. This machine has never been used for grinding, only for milling. The machine can be inspected at any time. An invoice with 19% VAT shown separately will be issued. Iijdpfx Aboy Spmdovsc

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition. Iisdpjyubh Refx Abvec

Condition: used, first registration: 03/2013, color: grey-black, Year of construction: 2013, gearing type: other, LICENSE PLATE: XA020AJ TITLE: TECNOKAR SKIP LOADER SEMITRAILER WITH CRANE REF: 25R14 YEAR: 03/2013 Iiedpox Twfqjfx Abvsc AXLES: 3 MAXIMUM LENGTH: 9.60 m ITALIAN / FOREIGN: Italian CAPACITY: 25,900 kg - TRAILER: 38,000 kg fully loaded BODY TYPE: skip loader EQUIPMENT: HYVALIFT 30.67 SK EXTENSION: yes SWING: yes ROLLERS: retractable ADR: no BODYWORK COMPATIBILITY FROM: 5.00 m + 0.20 m TO: 7.60 m + 0.20 m SUSPENSION: pneumatic BRAKES: disc TYRES: 385/65 R22.5 ACCESSORIES: - PENZ 15ZRT8.50 folding crane, year 2012, 1 extension on the 1st boom and 2 extensions on the 2nd boom - joystick - GUSELLA SHZ305/K/0 6-tine grab, year 2012, capacity 300 l, weight 428 kg with integrated rotator REFURBISHED: no INSPECTED: no TYRE CONDITION: 40% Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales team for up-to-date pricing and conditions. For more information: Loris: 3484773001 URL: #theskiploaderspecialists SCARRABILI AURORA operates in the buying and selling of industrial and commercial vehicles, with a specific focus on the waste management sector. Specialists in trucks, trailers, and skip loader equipment. Stock of over 50 trucks and more than 150 bins, containers with and without skip loader cranes, ready for immediate delivery. E.&O.E. Due to the large number of listings and details provided, Aurora recommends verifying the accuracy of the data with sales staff.

Condition: excellent (used), CATALOG NUMBER 7599 TECHNICAL DATA - Shaft width 410mm - Number of knives 4 pcs - Max thickness of workpiece 240mm - Top: - Ratchets - Toothed, pull-type, and helical feed roller - Pressure rollers - Planing roller Iisdpfjy T Rfqox Abvoc - Pressure roller - Smooth pull-type delivery roller - Motor 5.5kW - Electric brake - Manual table lifting - 2 feed speed types 7, 14 m/min - Diameter of extraction nozzle 120mm - Dimensions (L/W/H) 900x1030x1100mm - Weight 350kg ADVANTAGES – Made in Italy – Used thickness planer, very good condition Net price: 12900 PLN Net price: 3071 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), functionality: fully functional, Year of construction: 2016, Condition is very good. Inspection possible. Iiodpfx Ajxt Nznebvjc

Condition: used, Year of construction: 2007, operating hours: 15,000 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, table length: 4,500 mm, table width: 2,000 mm, tank capacity: 8,000 l, pressure: 4,150 bar, operating pressure: 3,800 bar, input current: 84 A, power: 45 kW (61.18 HP), Waterjet cutting system CMS Tecnocut IDRA (predecessor to the Idroline series) 2 x 5-axis cutting heads (only 1 head is fully operational / head 2 is functional but lacks high-pressure/sand feed) Cutting head configuration as a 2D head with a 250 mm Z-axis travel range Cutting head configuration as a 3D head with a 150 mm Z-axis travel range, A-axis travel range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control, not 2.5D like many other machines Cutting area: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 250 / 150 mm A-axis: +/- 274 degrees B-axis: +/- 62 degrees Details: - 5-axis cutting head with IKC technology (intelligent cutting head control for angle error compensation) - Anti-collision/height sensor for surface scanning Ijdpfx Aozbz Evobvoic - DDX EasyStone Premium software - 60 HP/45 kW Jetpower EVO pump (3-cylinder) with an output of up to 5 L/min / Maximum pressure 4150 bar / Normal operating pressure 3800 bar The machine is still in operation and connected to power until July 31, 2026.