Used Teka Thz for sale (19)

Condition: used, functionality: fully functional, Year of construction: 2005, Concrete mixer TEKA TZK 2.0 Hodpfx Asywn T Teb Usk Mixing capacity: 2 m³ Ceramic lining inside Not yet dismantled

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. Hedpfol Dw U Dex Ab Ujk The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Hjdpjib Dadefx Ab Uek Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Hjdpfx Aerhidmjb Uek Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Year of construction: 2010, type of input current: three-phase, filter area: 50 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic and vacuum-type, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2010 The filter is cleaned during operation by compressed air pulses controlled by a microprocessor, ensuring high system efficiency. Low compressed air consumption due to the "Power-Spray" system. The Filtercube central extraction and ventilation unit, equipped with cartridge filters, is the ideal solution for almost any problem involving smoke and dust filtration. The fan is positioned on the clean-air side, reducing explosion risk to a minimum. Applications: - Central extraction system for multiple welding stations - Extraction system for welding robots - Extraction system for thermal cutting and grinding tables - General hall ventilation system (push-pull or displacement system) - Extraction system in combination with extraction tables - Extraction system for grinding non-explosive materials Specifications: - Soundproofed fan housing, power: 4 kW Hjdpfx Aow Aw Nneb Usk - Capacity: 5,000 m³/h - Negative pressure: 3,000 Pa - Inlet diameter: 315 mm - Filtration surface: 50 m² New filter cartridges tailored to customer specifications available on request. Stock no.: 1047

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, filter area: 100 m², input voltage: 400 V, volume flow: 3,000 m³/h, total width: 1,000 mm, total length: 1,000 mm, total height: 3,250 mm, compressed air connection: 5 bar, operating temperature: 20 °C, overall weight: 500 kg, negative pressure: 2,500 Pa, control voltage: 24 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, noise level: 75 dB, Equipment: documentation/manual, Year of manufacture: 2019. 5.5 KW / 11.5A - Equipped with Softstarter and Siemens PLC control. - Includes 4x 25m2 NEW filter cartridge mounted in the unit. - Fitted with compressed air cleaning system, Delta P controlled. - Ex works Soerendonk (NL), loaded on truck free of charge. Hodpfx Abjymglxe Ujk Tested & operational in our workshop. - Supplied with Softstarter option included. - Including 4x 25m2 NEW filter cartridge, installed in the machine. - With compressed air dust discharge system, Delta P controlled. - Ex works Soerendonk (NL), loaded on truck free of cost. - Sold as is, no warranty. - Tested on site and in our workshop, in proper working condition. - Testing and inspection possible.

Condition: new, 2500 m³/h 2500 kPa volume capacity 1600 m³/h feed volume > 99 % 1,1 kW 72 dB(A) Hsdpegvq E Defx Ab Uok 0,58 x 0,58 x 0,9 m 80 kg 230 V / 50 Hz V Particle pre-separator: coarse filter, pre-filter Main particle separator: main filter Gas separator: activated carbon filter Hose arm: joints inside What is the filtoo? The filtoo filter device newly developed by TEKA is a mobile filter system, for many tasks in the area of ??filtration of smoke and dust and gases can be used. The device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%). at The filtoo is intended to be used for the separation of smoke suitable, which by welding separation and joining processes at the Machining of unalloyed steels, including high-alloy chrome / Nickel steels are released. How does the filtoo work? The Polluted air sucked into the filter system. In a multi-level The filter process filters the particles / gases from the air stream and the clean air is fed back into the work area. Where can the filtoo be used? At welding workplaces, in the workshop area, for soldering applications, at Restorers and locksmiths. What do you get for your money? All you get is a completely ready-to-use "plug and play system" the recording device must be connected before commissioning. How is the filtoo set up? The housing is made of a stable sheet steel construction and is inside as well as provided with a powder coating on the outside. The filter elements are over A maintenance hatch is accessible and can therefore be accessed very easily and quickly can be removed. The system has functional controls.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Hodpfjhp S Trex Ab Usk Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction Hedekm Rynepfx Ab Usk (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: used, Year of construction: 2015, volume capacity 2500 m3/h 0 3000 mm total power requirement 1,1 kW weight of the machine ca. 0,08 t dimensions of the machine ca. 0,58x0,58x0,58 m Hodpfxeyfwy Ds Ab Uek Mobile extraction system for one workplace, IFA-tested

Condition: good (used), Year of construction: 2019, machine/vehicle number: 978002, Offer 25412 Technical Data: - Mobile extraction system with articulated extraction arm - Suitable for the extraction of welding fumes when welding steel, stainless steel, aluminum, unalloyed or galvanized steels - Welding fume class: W3 - Articulated extraction arm: 360°, 4000 mm - Max. fan airflow: approx. 1600 m³/h - Max. static pressure: 1800 Pa - Particle separator: coarse filter, pre-filter - Main particle separator: main filter - Gas separator: activated carbon filter - Drive – fan: 220 V / 1.10 kW - Required installation space: approx. W 600 x H 900 / 2450 x D 600 mm Hjdpfeyf A Uyox Ab Uok - Weight: approx. 80 kg - Recorded operating hours: 240 h

Year of construction: 2000, condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Connection diameter: 50 mm Hsdpfxjmf Uzxo Ab Ujk Equipment: mobile, portable Accessories: hose 3.000 mm Connection: 1.2 kW 230 V Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm without hose

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Two used TEKA scrapers are offered. 1. THS 4020, built in 2009, scraper arm: 16.00 m, 2. THS 6022, built in 1993, scraper arm: 16.00 m. Hedpev Tb A Iofx Ab Usk Fully functional. For further information, see the rating plate.

Condition: good (used), Year of construction: 2011, functionality: fully functional, TEKA Filtercube 4H dry extraction system airflow: 6000 m³/h max. static pressure: 3000 Pa motor power: 7.5 kW 400 V Hsdox Taqispfx Ab Usk 50 Hz 15.5 A IP54 weight: 380 kg year of manufacture: 2011

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Type of current | Ph | 1. Engine power | kW | 2.4 Air flow volume max. | m³/h | 640 Hodpjxvpumsfx Ab Uek Negative pressure max. | Pa | 15000 Protection class | | IP54 ISO class | | F Extraction performance | % | >99 Width | mm | 365 Depth | mm | 768 Height | mm | 801 Weight | kg | 70 Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Max. temperature of polluted air at the capture point | °C | +50 Allowed max. humidity | % | 70 Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2016, operating hours: 6,041 h, suction capacity: 4,000 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2016 Operating hours: 6041 Filter cleaned with a microprocessor controller with compressed air pulses during operation, which ensures high efficiency of the device. Low demand for compressed air thanks to the "Power-Spray" system The central Filtercube filter ventilation device equipped with cartridge filters is an ideal solution for almost all problems in the area of fume and dust filtration. Fan on the clean side, which reduces the risk of explosion to a minimum. Application: central exhaust system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general filter ventilation of the hall (push-pull system, displacement system) extraction system in combination with an exhaust table Hedpfx Astpvcyjb Usk extraction system for grinding non-explosive materials Parameters: Fan in a sound-absorbing enclosure with a power of 3 kW. Capacity 4000 m3/h Negative pressure 3000 Pa Inlet diameter: 315 mm Filtration surface: 50 m2 control cabinet technical documentation Possibility to order new filter inserts tailored to the customer's needs.

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included. Hedpfjnyhvqjx Ab Ujk

Condition: new, volume capacity 2500 m3/h 0 3000 mm Hsdjfrzt Ujpfx Ab Uek total power requirement 1,1 kW weight of the machine ca. 0,08 t dimensions of the machine ca. 0,58x0,58x0,58 m

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Hsdsu Aafdepfx Ab Ujk Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h