Used Kama Profold 74 for sale (10)

Condition: used, Year of construction: 2023, Spraying machine KaMa, KR BM 1000 B, The spraying machine is a demonstration model from a trade fair. It was only used for test and demonstration purposes. With 1 piece HD pump Bings Marple 8/25 up to 175bar and 4 pieces airless spray guns Krautzberger KAA1300. Machine equipped with change-over valve for quick color change, lever switchable to max. 3 color circles and 1 rinsing agent pump (options). Iodjumvnhepfx Ab Tetc In Ex-version. Machine is ready for demonstration at the warehouse in Blomberg. - Producer Ka-Ma - Type KR BM 1000 B - Year of construction 2023 - Working width 1.200 mm - Single gun drive system - Dry filter system - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system SPS, LS - Number of installed lacquer circles 3 Stk. - Number of installed spraying guns 4 Stk. - quick change system for spraying guns - spray gun type Krautzberger KAA1300, Airless - Airless spraying system - Height adjustment for spraying guns 150 mm - Producer lacquer pump Binks Maple 8/25 bis max. 175bar - Supply air box - Suitably for water based lacquer - Length 3243 mm - Width 3482 mm - Height 2450 mm - Voltage / HZ 400 / 50 - Colour 7035, lichtgrau - Weight 3.100 kg _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: good (used), Here we offer you 4 transport rollers for sale. Included in delivery are: 04x swivel castors, used Manufacturer: Kama Material color castor: red Material color frame: sendz. galvanized Itedpfehunwpsx Ab Tec Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm Roll width: approx. 34 mm Bearing: needle bearing Roller material: rubber plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 55 mm (center - center hole) Weight / pcs: approx. 0,970 kg

Condition: good (used), Current stock: approx. 965 pcs. Included in delivery: 01x swivel castor, used Manufacturer: Kama Material color castor: red Material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm roller width: approx. 34 mm Bearing: needle bearing Itedpfx Abehmuyzo Tsc Roller material: rubber plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 55 mm (center - center hole) Weight / pcs: approx. 0,970 kg General information about the article: This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KR 500, total length: 2,650 mm, total width: 1,800 mm, total height: 1,780 mm, overall weight: 1,700 kg, power: 6.25 kW (8.50 HP), warranty duration: 12 months, workpiece height (max.): 80 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 9,999 mm, KAMA Buerstenschleifmaschine KF FZM 1006 Flexa, Baujahr 2026, Lieferung ab Werk Die KR FZM 1006 Flexa Bürstenschleifmaschine wurde für das Roh- und Grundierschleifen von rustikalen und CNC-gefrästen Oberflächen entwickelt und erzielt mit ihrer flexiblen Schleiffunktion auch auf schwierigsten Oberflächen erfolgreiche Ergebnisse. Scheibenbuerstenschleifeinheit, bestehend aus 8 asymetrisch angeordneten Buersten. Position und Drehzahl stufenlos einstellbar. Kreuzbuerstenschleifeinheit, bestehend aus 2 Buersten, die sich in entgegengesetze Richtungen drehen. Druck und Drehzahl stufenlos einstellbar. Zylindrische Buerstenschleifeinheit, bestehend aus zwei zylindrischen Buersten, die sich in entgegengesetzte Richtungen drehen. Druck und Drehzahl stufenlos einstellbar. Itedpfx Abjyh E Sdo Toc Schleifpapierkoernung 40 - 600 Lieferzeit: 4 Wochen

Condition: good (used), Year of construction: 2021, operating hours: 14,000 h, functionality: fully functional, Professional finishing in the classic digital printing format: This is why we have developed the world's first flatbed die-cutter for the B3+ sheet format KAMA ProCut 58. The versatile professional die-cutting/embossing machine (580 x 400 mm) is extremely versatile. Punching, creasing, scoring, perforating and kiss-cutting labels, blind embossing and Braille as well as hot punching of plastic. Paper from 80 g/m² Cardboard max. 800 g/m² Plastic 80 - 800 g/m² (up to 1 mm) Sheet format max 580 x 400 mm Sheet size min 210 x 148 mm Iedpsvfpwwofx Ab Tjtc Speed* 6,000 sheets/h Punching force 120 t (1.2 MN) Punching format max 570 x 380 mm Gripper edge 10 mm Dimensions (length x width) 2.6 x 1.75 m

Year of construction: 2020, operating hours: 1,000 h, condition: used, functionality: fully functional, KAMA ProCut 76 Foil – Die-Cutting and Hot Foil Stamping Machine Model Year 2020 | High-End Configuration | Industrial Quality “Made in Germany” For sale is a KAMA ProCut 76 Foil from the 2020 model year. This machine is engineered for demanding die-cutting, embossing, and hot foil applications, making it ideal for carton, packaging, and finishing companies with high quality requirements. Features & Highlights • High-performance die-cutting machine for paper, board, and plastics • Integrated hot foil stamping system for premium finishing • Very high production output with excellent precision • Robust, durable machine design • Servo-controlled feeder and transport table with electronic double-sheet control • High degree of automation and reproducible quality • CE-compliant, Made in Germany Standard Equipment • Motorized platen pressure adjustment (MPC) • 4+1 system with base plate and 1 set of 1-mm counter plates  – 5× medium, 1× hard • 1 standard chase with fine adjustment for steel rule tools (full format) • 3 pile trolleys for feeder and delivery (plus 4 additional pile trolleys) • Servo-driven feeder and transport table • Electronic double-sheet control • 1 set of KAMA fastening elements • 1 set of mounting elements for 15° dies on KAMA carrier plate • Industry 4.0-ready for remote maintenance and network integration Special Equipment & Options • Integrated hot foil stamping  – Mobile frame with integrated heating system  – 4 or 6 heating zones  – Two foil draw motors  – Powered rewind shaft  – Two tool carrier plates  – Foil-Saver software for foil optimization • KAMA AutoRegister  – Maximum registration accuracy  – Especially suited for digitally printed sheets • Pneumatic tool clamping (76 only) • Die-cutting force display with overload protection • Universal chase • Chase rack • Vacuum pump and compressor • Servo main drive for asynchronous drive cycle  – Up to 50% higher machine speed  – Alternatively, extended contact time for hot foil stamping Technical Data (excerpt) • Machine type: KAMA ProCut 76 Foil • Model year: 2020 • Maximum sheet size: 760 × 600 mm • Minimum sheet size: 279 × 210 mm • Maximum die-cut size: 743 × 585 mm • Material range:  – Paper from 100 gsm  – Board up to 1,500 gsm (approx. 1.8 mm)  – Plastics such as PET, PP, PVC • Production speed: up to 5,500 sheets/h • Die-cutting force: 165 tons (1.65 MN) • Gripper margin: 10 mm • Machine dimensions (L × W): 4.87 × 2.69 m Applications • Die-cutting of folding cartons and packaging • Hot foil stamping for premium enhancements Itsdsyc Hmujpfx Ab Toc • Carton, paper, and plastic applications • Post-press finishing of digitally printed sheets with highest register requirements • Short and medium runs with maximum precision Conclusion The KAMA ProCut 76 Foil is a highly flexible, high-performance die-cutting and hot foil stamping machine for professional users. With comprehensive standard and special equipment, state-of-the-art servo technology, and Industry 4.0 readiness, it offers an outstanding overall package for demanding production environments.

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Itedpfx Abjxzvams Tec Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Condition: used, with mounted three-jaw chuck table-Ø: 200 mm Itodpfsda I Rvex Ab Tec bore approx.: 18 mm overall height: 100 mm total height with chuck: 165 mm width: 270 mm length: 320 mm

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm Ijdpfewh Tq Sjx Ab Tetc • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: used, Year of construction: 1980, operating hours: 5,464 h, functionality: fully functional, overall weight: 9,000 kg, Automatic die-cutter Itodpjwb Uqgsfx Ab Toc KAMA A1 POLYGRAPH KAMA TS 96-1 manufactured by DDR for die-cutting solid and microwave cardboard. Minimum sheet size 330x480, maximum size 650x945 year of manufacture 1980 weight 9 tons.