Komatsu d 65 px buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Type of fuel: Diesel Make of engine: Volvo TAD734 9rivv0evv Transport dimensions (LxWxH): 2.16x1.26x1.4 more
2
Bredel SPX65 peristaltic hose pump serial: 20241 Wplug on stainless mobile frame, inner hose diameter 65mm, max continuous flow rate 20,000 L/H, max intermittent flow rate 32,000 L/H, self priming and can run dry without damaging pump more
5
Power: 85 HP 3wmn8xm9h Hours of operation: 9530 Weight: 7700 kg BPL 600mm, LW ca 60% good, PAT shield, extra work lights. shoes 600mm, UC ca 60% good, PAT-blade, extra working lights more
6
Condition: New in stock Gebrauchsspuren: Low wear Housing: Leicher rust guarantee in months: 12 pressure (pmax): 30 .... 20 m volume (max): 8,5 .... 60 m / h Frequency: 60 Hz speed: 3551 U / min Power: 4.6 kW Voltage 400/690 V AC power: 8,8 / 5,1 A Protection class (IP): 55 Flange 65 / 120mm bolt circle diameter: 145 mm M16 Weight: 82.46 kg Storage location: Rosenfeld Stockyard: P5C1 P2yvcv more
6
Type of fuel: Diesel Field of application: Construction Make of engine: Iveco 8065E M7qpn Transport dimensions (LxWxH): 3.02x1.19x2.11 more
5
Power: 132 HP Hours of operation: 10450 : Weight 13100 BPL 710mm, LW ca 30% good, PAT - shield, climate, Leica 2D laser equipment ----- shoes 710mm, UC ca 30% good, PAT - blade, air conditioning, Leica 2D laser machine Bnjdkdfem more
6
Type of fuel: Diesel Field of application: Construction Baabqkkdqh Make of engine: Iveco 8065E Water tank volume: 350 l Transport dimensions (LxWxH): 3.04x1.19x2.11 more
5
Power: 724 HP Mrpg9 Hours of operation: 25930 Weight: 42000 kg Ber. 24.00-R35 ca 20-40% good, air conditioning, body heating, centralized lubrication ----- tires 24.00 R35 ca 20-40% good, aircondition, body heating, central lubrication more
6
Type of fuel: Diesel Field of application: Construction Make of engine: Iveco 8065E Transport dimensions (LxWxH): 3.04x1.19x2.11 Bajgqn0klm more
6
Type of fuel: Diesel Field of application: Construction Power: 641 kW (872 HP) Make of engine: Caterpillar 3412 Djj20ob Emission level: Stage II Transport dimensions (LxWxH): 0.24x0.13x0.18 more


komatsu d ...
every day

New machines via email!

Be informed!
6
Power: 641 kW (872 HP) 2qy3ai Fits to following machines: Applicable for multiple purposes, was previously used to drive a Warman pump. This Warman pump is also available. Emission level: Stage II Transport dimensions (LxWxH): 2.4x1.3x1.8 more
6
Type of fuel: Diesel Field of application: Construction Make of engine: Iveco 8065 SRE Transport dimensions (LxWxH): 3.44x1.2x2.24 Ssvhto more
6
Type of fuel: Diesel Field of application: Construction Cuokdft Make of engine: Iveco 8065E EP marked Transport dimensions (LxWxH): 3.02x1.19x2.08 more
6
Type of fuel: Diesel Field of application: Construction Yrnyrs Make of engine: Perkins EP marked Transport dimensions (LxWxH): 3.54x1.12x2 more
6
***MACHINE AVAILABLE TO END USER CUSTOMER ONLY^^^ WITH OPTION OF INSTALLATION, OPERATOR TRAINING, SERVICE ETC 650MM CENTRE DISTANCE x 175MM HEIGHT, EXTERNAL WHEEL 500MM, ACTIVE LENGTH POSITIONING, MOVOMATIC IN PROCESS GAUGE READY, ELECTRONIC WHEEL BALANCING, SWIVEL OF TABLE 8.5 DEGREES, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 21i T. GRINDING MACHINES FOR RENT..... *****FREE OPERATOR TRAINING ON ALL MACHINES SOLD IN NOVEMBER***** WE BUY/SEL... more
1
max. wheel diameter:650 mm gear width:1 mm Teev9dhmx max. module:15 (22) min. module:1,5 number of teeth:10 - 200 min. gear diameter:90 mm Zahnschrägung max.:45 ° grinding slide stroke:490 mm grinding wheel diameter:200-280 mm grinding wheel - swivable:0-10 ° workpiece weight:30 - 50 -200 kg base circle dia. - max.:630 mm base circle dia. - min.:65 mm centre distance:413-621 mm feeds axial:0-2100 mm/min rapid traverse:4 m/min power capacity:8,5 kW weight of the machine ca.:8 t dimensions of ... more
4
Sewer strut channel strut channel support, construction support, Verbaustrebe br / br / -Kanalbaustrebe for Trench br / -length 1.40 to 1.65 m br / tubing diameter 70 mm br / -Auflageplatte 140 x 100 mm br / -36x struts available br / br prize piece / pieces -Weight 20 kg br / br -Dimensions / -weight 758 kg complete Xywikgpxc more
3
Bosch SPM 50 TD spindle module 066665-208, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Mtz8c8 more
6
turning diameter over bed 1100 mm turning diameter over slide rest 600 mm turning length 5000 mm centre height 500 mm spindle bore 80 mm Mvkpl spindle turning speed range 24 / 5 - 500 U/min longitudinal feeds: 0,20 - 3,05 mm/U face feeds 0,07 - 1,04 mm/U tailstock taper ISO 50 workpiece weight max. 5 t total power requirement 22 kW weight of the machine ca. 15,7 t dimensions of the machine ca. 8,2 x 2 x 1,76 m Condition: ready for operation Electric 400 Volt 3 jaw chuck Forkardt F 500 M... more
6
pressure 65 t square edge steel 45,0 mm L-beam 80 x 10 mm Punching capacity 30 in 17 mm shear: flat material 150 x 17 mm round bar steel 50,0 mm Eqo2vyjny weight 2550 kg more
6
RENT OR BUY USED STUDER LIKE S35, S36 FAVORIT, S40CNC, S20CNC FAVORIT, S25, S33, ECO 650, S30 LEAN PRO, S145, S20-2, S40-4, S40-2 (RENT ONLY AVAILABLE IN UK OR ITALY) WE BUY ANY GOOD USED STUDER CNC FROM YOU. GOOD STUDER FOR SALE/WANTED... STUDER OPERATOR TRAINING, STUDER SERVICE, STUDER INSTALLATIONS, STUDER GEOMETRY CHECKS, STUDER GRINDING COURSES STUDER EXPERIENCE SINCE 1984 AFFITTASI O ACQUISTO RETTIFICATRICE IN TONDO USATE ESTERNI/INTERNI PRONTO CONSEGNA STUDER S35, S36 FAVORIT, S40CNC, ... more
6
lifting capacity in kg: 7500 kg lift: 3600 mm fork length: 60x200x2000, Seitenschieb mm Lifting height: 4720 mm weight of the machine ca.: 9,86 t space requirements of the machine approx.: L:5,7xB:2,62xH:2,8 m lifting height fork:3600mm lifting height total: 4720mm fork carriage hydr. adjustable Yqabck ready to start! [...] more
5
Hydraulic press, two-column press, oil-press-press force stem 65 to hydraulic unit max 330 bar working table 440 x 250 mm max loading height 295 mm Max width 300 mm Max stroke 220 mm with safety cage-max feed speed mm / sec retraction speed mm / sec Dimensions 1680/500/H2300 mm Weight 980 kg Dui07a more
1
Emcoturn 365 Machine equipment Fjmcpbzay without u.ausgewiesenes accessories 12 x Sauter disc turret behind the Centre of rotation KUPA LM 1500 short bar loader Collet Chuck Marquart Quadro NC Part catcher, basket Foot switch to operate the clamping device Year of construction 1998 complete documentation available following overhaul work was carried at amortised 2016 new hydraulic hoses, hydraulic oil, hydraulic filter replacement new Faltenbalgvon HEMA new scraper in Z & X axis by... more
6
pressure 165 t chamfer lenght 2100 mm distance between columns 1600 mm Control DA 65 DELEM ajustment speed 100 mm/sec working feed 10,0 mm/sec stroke - stepless adjustable 350 mm Ing9y0x dayligth 550 mm total power requirement 18,5 kW range L-W-H 2.800 x 1.880 x 3.230 mm weight 10.600 kg more
6
Vehicle data - make: Steinbock - type: WP 13-24 I / / 1655 hrs / HH 4400 mm initial lift - type of drive: electric - load capacity: 1300 kg - load Centre of gravity:-lifting height: 4400 mm - range: 0 mm - year: 1996 - operating hours: 1655 - internal No.: C0113 _ 7myt8lksl Mast data - mast type: triplex - lifting height: 4400 mm - height: 1990 mm - free lift: 1540 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1990 mm - weight: 1295 kg _ ... more
5
Heat output capacity: KW air volumen: m³/h weight of the machine ca.:0,4 t 87by9silb bar length:1000 mm dimensions of the machine ca.:1,2 x 1,9 x 1,4 m more
5
Angle for filter system, exhaust system, air ducts and fittings br / br / -connection 565 x 310 mm br / -connection 500 mm br / -from steel sheet br / -dimensions 870/650 / H650 mm br / Weight 38 kg Tmfq2nysr more
2
floor-plate length 1005 mm floor-plate width 505 mm floor-plate height 65 mm no. of flutes 2 groove width 22 mm flute depth 40 mm hole in the table - mm material Stahl total power requirement - kW Mqeij weight of the machine ca. 0,18 t dimensions of the machine ca. m more
5
table width 5500 mm Mqutekq table length 23000 mm burner heads 6 control Esab NCE 510 rapid traverse 24 m/min dimensions of the machine ca. 7 x 23 x 2.2 m Well-preserved flame cutting machine with only 14500 working hours, without table and exhaust system. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
3
gebr. L + Z lathe make AVM ANGELINI Model MAS 165 S. No.: 2184 year 1994 Tip height 165 mm Top width 800 mm Turning diameter: bed 330 mm support 200 mm Spindle bore 38 mm 16 spindle speeds 35-2480 UpM Motor 3 HP Baqsgqgs8h External dimensions: length 1700 mm Width 700 mm Height 1300 mm Weight approx. 720 kg With: Quick change Toolpost Lynette running with Change gears 3 - jaw Chuck 160 mm Ø more
5
Sewer strut channel strut channel support, construction support, Verbaustrebe br / br / -Kanalbaustrebe for Trench br / -length 1.40 to 1.65 m br / tubing diameter 42 mm br / -Auflageplatte 70 x 70 mm br / -28 struts available br / br prize piece / pieces 6 kg -Weight br / br -Dimensions / -weight 268 kg complete with transport case Lj3dcyo more
Phhfrc92black-white Simplex-system First installed: 2008 Speed: bis zu 91 m/min., bis zu 616 images/min.(2-up, Simplex A4) Resolution: up to 1.200 x 600 dpi Additions: incl. hunkeler unwinder UW6, rewinder RW6, Full Service until dismantling more
3
planing lenght 650 mm planing width 690 mm workpiece height 420 mm vertical movement of steel head holder slide 190 mm table surface - upper 625 x 340 mm no. of strokes 15 - 160 Stück feeds of table 0,2 - 2,0 mm/min motor cap. in case of hydrl. drive 1 PS flange-mounted motor 6,5 PS cutting speed Stufe I 8-28 m/min cutting speed Sufe II 28-42 m/min 8u3relsco table height 375 mm weight of the machine ca. 2,1 t dimensions of the machine ca. 2,54x 1,5x 1,5 m with misc. tools! more
1
Belt conveyor (10,5 m) SMA-REF-6076 Type: sawmill conveying, pushing, range: Length: 10,5 m Width: 0,65 m Condition: ready for action Baqeezijlc Location: Western Germany Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
2
Communication No.: Lg 30117 Band feeder BRM 65/220.9 - HH 2000.2 used in good condition Year 2010 - machine no. 001748 8p3h2ovmt In a space-saving long design for the following specifications: Technical data Steel blank Strength of 400N/qmm Yield approximately 240 to 270 N/qmm Bandwidth up to 220 mm Band thickness 1,0 to 5,0 mm material cross section max. 280 qmm Coil weight 2,000 kg System consisting of Double decoiler HH 2000.2 Volume leveler BRM 65/220.9 Setting plant ... more
4
Varia gate washer Vario adjustment pulley, Varioriemenscheibe, PIV gear, Variogetriebe, variable speed pulley, variable pulley-verstellbar-gewuchtet diameter pulley outer 165 mm diameter recording inside 24 mm - Varioriemenscheibe with compression springs - 1 x discs available Prize piece dimensions 165/165/H104 mm weight 3.9 kg Iwjrus0gc more
2
Make: ABBType: DMA+450+65W G0rqsbn more
3
turning diameter over bed 335 mm turning diameter over slide rest 175 mm turning length 750 mm center height over bed 165 mm 8zkstx centre distance 750 mm bed width 250 mm spindle bore 42 mm turning speed range 40 - 2000 U/min 4-jaw-chuck diameter 160 mm quick change toolholder MULTIFIX Typ A taper in tailstock-quill MK 3 dia. of quill 48 mm quill stroke 140 mm voltage 400 V total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,80 x 0,80 x 1,20 m - [.... more
2
table diameter 265 mm table load 100 kg table height 110 mm number of T-slots 8 I8ux7y2ou T-slot - width 12 mm total power requirement kW weight of the machine ca. 0,03 t dimensions of the machine ca. m more
6
pressure 65 t throat 300 mm ca. stroke 14 - 90 mm table-size 750 x 600 mm hole in the table 240 x 140 mm dimension of ram 400 x 230 mm ram strokes 60 + 90 Hub/min ram adjustment 75 mm safety distance 208 mm tracking travel 42 mm tool hole in ram 40 mm total power requirement 6,9 kW weight of the machine ca. 3,75 t dimensions of the machine ca. 1,9 x 1 x 2,2 m 3p0qg9n00 Condition: ready for operation Electric 380 Volt Two-hand control adjustable table Hydraulic-device Machinefeets ... more
5
Counterbore, countersink -Grössen2x60/1x65 mm radii manufacturer Bilz recording 48 mm bore 12 mm is only completely sold-Weight 2 kg H8irz07 more
6
travel -x axis 210 mm travel -y axis 610 mm control SIEMENS 840 D Sinumeric spindle bore 65,0 mm main drive 15,0 kW feed speeds 24 mm/min quill stroke 120 mm dist. between centers 500 mm weight of the machine ca. 4,5 t dimensions of the machine ca. 2210 x 1500 x 2210 mm 2qyr2i * CNC-control Emcotronic T1 * 3-jaw chuck * quick clamping chuck with collets * optical preselection device * 8-fold turret * tailstock with center * various accessories Out of a company closure. Inspectable under pow... more
6
IntNr.: 5420 * Device details: * Capacity: 1800 kg Lifting height: 200 mm Mast type: No mast height: 820 mm Length/width/height: 1700 / 700 / 1230 mm Operating weight: 454 kg The vehicle is offered, in the current status, as of the previous owner without warranty and without any warranty. Without valid FEM testing 4,004 (UVV). Any technical and optical defects are not corrected. You are aware that the vehicle is not repaired and is not the valid safety regulations. The vehi... more


komatsu d ...
every day

New machines via email!

Be informed!

to

to

Change search
KOMATSU D 65 PX
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close