Used Steam turbines for sale (13)

Condition: ready for operation (used), Axle height: 80mm, power: 5.4kW, torque: 22.4Nm, speed: 2300rpm, moment of inertia: 98.3kg/cm², weight: approx. 50kg. Including integrated holding brake. Documentation available. On-site inspection is possible. Cgjhewf Nydoxzr E Set

Condition: excellent (used), Year of construction: 2012, operating hours: 25,000 h, Functionality: fully functional, machine/vehicle number: J00674, power: 738 kW (1,003.40 HP), temperature: 59 °C, A TURBODEN 10HR ORC system with the following key specifications is for sale: Year of construction: 2012 Operating hours (h): 25,000 Net electrical output (kW): 738 District heating output (kW): 4,549 District heating flow rate (m³/h): 115 Inlet temperature (°C): 59 Outlet temperature (°C): 93 Cehovrfpiexzr E Ssgt Additional equipment supplied: - Thermal oil tank - Expansion tank - Pumps - Control cabinets - etc. The system was professionally decommissioned and preserved by Turboden.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 60,000 h, Steam turbine including gearbox and generator, hydraulic system, switchgear and various accessories Cgjhxevf Na Eezr E Sot Make: MAN Type: MARC 1 - CO2 Operating hours: 60,000 - general overhaul was carried out after 40,000 hours

Condition: new, Year of construction: 2009, • Specification: Extraction & condensing, Inlet pressure: 104 bar, Output: 215MW, Extractions: MP2: 22 bar, MP1: 10 bar, LP: 4.5 bar, Feed Water: 0.4 bar, Minimum load: No extractions, Only bleeds, Steam flow: 45 kg/s, Maximum load: Steam flow: 270 kg/s. • Generator: 250 MVA, Air to Water Cooled, 18 kV, 8019 A, 50 Hz, 3000 rpm • Condenser: Average: 17 ºC, Min: 15 ºC, Max: 25 ºC. See attachment for inventory list of all items included and packaging details • Storage Conditions: Delivered 2009 and unused, currently stored indoors and secured, Turbine & Generator completely sealed, silica gel is inserted in the Turbine & Generator and regularly replaced. Equipped with electronic monitoring sensors for humidity and temperature with criteria from Toshiba for storage. Cgjhxzrjv Tfp Sj E Sot Contact Matt Fraser on +61 448 648 700

Condition: new, Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 8330006 A101, pressure: 35 bar, power: 2,284 kW (3,105.37 HP), rotational speed (max.): 1,800 rpm, rated speed: 1,500 rpm, type of cooling: water, Like New: Originally purchased for a waste incineration project but never installed or used. TECHNICAL DETAILS Temperature: 40 °C Type of cooling: water Speed Speed (min.): 1,500 rpm Speed (max.): 1,800 rpm Rated speed: 1,500 rpm Cgehxzev Dvdzsr E Sst Turbine data point A Rated power: 2,284 kW Steam pressure: 35 bar Steam temperature: 380 °C Regulated outlet pressure: 6 bar Regulated outlet temperature: 196 °C Flow rate inlet/outlet: 13.5 / 9.5 t/h Outlet pressure: 0.1 bar Outlet temperature: 46 °C Turbine data point B Rated power: 2,488 kW Steam pressure: 35 bar Steam temperature: 380 °C Regulated outlet pressure: 8.2 bar Regulated outlet temperature: 226 °C Flow rate inlet/outlet: 13.5 / 12.4 t/h Discharge pressure: 0.15 bar Discharge temperature: 55 °C Turbine data point C Rated power: 2,087 kW Steam pressure: 35 bar Steam temperature: 380 °C Regulated outlet pressure: 6 bar Regulated outlet temperature: 196 °C Flow rate inlet/outlet: 13.5 / 6 t/h Discharge pressure: 0.08 bar Discharge temperature: 42 °C Gearbox data Design power: 2704 W Rated speed LW / SW: 1500 / 8,304 rpm Transmission ratio LW/SW: 5.54 Center distance: 400 mm Max. inlet temperature: 60 °C Oil consumption: 70 l/mm Heat quantity dissipated: 33,694 kCal/h MACHINE DETAILS Overall height: 2,472 mm Overall length: 3,210 mm Overall width: 1,500 mm Total weight: 9,900 kg Electrical specifications Frequency: 50 Hz Type of input current: AC Input voltage: 39 V Rated current: 3 A

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, pressure: 20 bar, power: 774.8 kW (1,053.43 HP), frequency: 50 Hz, temperature: 350 °C, input voltage: 300 V, rotational speed (min.): 1,500 rpm, rated speed: 1,500 rpm, Two steam turbines are for sale, the high-pressure and low-pressure turbines are connected together to a generator. These can also be operated individually. Cgshxjvkcdbozr E Sst

Condition: ready for operation (used), An unused Siemens servo motor is available. Axle height: 160mm, power: 31kW, torque: 257Nm, speed: 1150rpm, moment of inertia: 2586kg/cm², weight: approx. 300kg. Including integrated holding brake. Documentation available. On-site inspection is possible. Cgohxzowf Nxmor E Sjt

Condition: good (used), Year of construction: 2018, operating hours: 27,240 h, pressure: 97 bar, power: 40,554 kW (55,138.03 HP), overall weight: 100,000 kg, rotational speed (min.): 4,648 rpm, MAN Diesel & Turbo SE DK080/250R Industrial Steam Turbine Cgjhxzr Eova Ih Do Sst Year Built 2018; installed date 2020; starting for production Jan. 2021; working hours 27240H (just for reference); power 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar; Inlet Temperature Normal/Max 525/535 ℃; weight 100,000kg each; size 5900x5330x5170mm each; includes HTAC surface cooler & extractor; Sulter Dalian condensate pump; Condition installed; the technical information available upon request

Condition: ready for operation (used), Year of construction: 2008, Speed: 892rpm, current consumption: 660A, Cos: 0.83, power: 355kW, insulation class: F, operating mode: continuous operation. On-site inspection is possible. Cehxzr Eev R Exzs Sjgt

Condition: good (used), Year of construction: 2018, operating hours: 13,993 h, pressure: 97 bar, power: 40,554 kW (55,138.03 HP), overall weight: 100,000 kg, rotational speed (min.): 4,648 rpm, MAN Diesel & Turbo SE DK080/250R Industrial Steam Turbine Year Built 2018; installed date 2020; starting for production Oct 2020; production stop Jul 2022; working hours 13993H; Cgjhxzrova Ifve E Sjt power 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar; Inlet Temperature Normal/Max 525/535 ℃; weight 100,000kg each; size 5900x5330x5170mm each; includes HTAC extractor, Sulter Dalian Condensate Pump; Condition dismantled by OEM; the technical information available on request

Condition: ready for operation (used), Year of construction: 2016, A total of 6 motors and a vacuum pump are available. 1) Servomotor Siemens 1FK 7043-4CH71. 2) Servomotor Siemens 1FK 7064-4CF71. 3-5) 3x servomotor Siemens 1FK 7042-2AF71. 6) Servomotor Siemens 1FK 7060-2AF71. 7) Vacuum pump Gardner Denver G-BH1 2BH1490-7AH16. On-site inspection is possible. Cehxov Ay Riszr E Segt

Condition: ready for operation (used), Four identical SEW-Eurodrive motors are available. Gearbox type: bevel gearbox, torque: 16900Nm, speed: 1475/21, motor output: 37kW, efficiency: 91.6%, Cos: 0.82, insulation class: F, oil type: CLP HC 220, oil volume: 90l, weight: 1004kg. On-site inspection is possible. Cgshxzrevtqtij E Set

Condition: ready for operation (used), There are 26 motors available. Cgshsikrb Isxzr E Sjt