Komatsu wa 350 buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
4
Way pressure control valve, solenoid valve, pneumatic valve, air valve, check valve, valve block Type 5350210030 price per piece -15 x available Snkxgui9m Weight 0.2 kg more
2
-Lifting tilting device 7h9txf7m8 -In addition 8 aluminum wagons for transport of paper waste -Press was overtaken by 2015 and equipped with new hydraulic pump and new engine more
2
-to fit Komatsu WA 470-3 -Volume ~ 4, 5 m³ -3, 20 m wide -Tooth /. -suitable to Komatsu WA 470-3 -Volume ~ 4, 5 m³ -3, 20 m wide Bacwuifa72 -teeth /. -For questions about emissions standards, please contact us / / If you have questions for exhaust regulations please ask US more photos and quotes on / / more pictures and offers at: more
6
Field of application: Construction Viby kileskifte 2500 liters skovl uden tænder, samt mekaniske pallegafler. Goodyear RL 2+, ca. 50% gode. Bakywpkyxz 3. hydraulik funktion Automatisk centralsmøring. Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 more
6
Wheel Loader Make: Komatsu Model: WA 480-6 Year 2012 Hours: 6012 (still working) Weight: 27500 kg Power: 224 kW Panel width: 310 cm Tray Capacity: 5 m³ Weight load: +/- 10 T Equipment: Load Weighing Balance Ascorel MC222+, Reverse camera, Air conditioning, Radio Condition: Very good and tested (see video) 9v9ldinxh more
3
modernized LTG StoreControl basic machine with new control The version control extension extended optional 4 identical Paternoster are available External dimensions: Height 3980 mm Width 3500 mm Construction depth 1530 mm 24 vehicles each with 350 kg payload in the scan utility dimensions: H = 220 mm B = 2850 mm T = 490 / 530 mm Chain jump 267 mm Tray in 1000 mm above OKFF with countertop in stainless steel Colour grey / blue New / to painting possible 97u79gsxj Moto... more
6
Hydraulically adjustable notching machine Indumasch type. Vari-Wang 350 maximum cutting length: 360 mm Max cutting capacity: 6 mm Number of strokes per minute: 28 maximum cutting - force of pressure: 40 to. Operating instructions and E. schematics available. External dimensions: Height: 1970mm Width: 1900mm 8wu82pz2z Total depth: 1500 mm Height of the work table: 900 mm Weight: 2600 kg more
6
-Bucket for Komatsu WA 200 -~ 2, 55 m wide -new U blade -Bucket suitable to Komatsu WA 200 Bacwurwgr3 -~ 2, 55 m wide -new -knife -For questions about emissions standards, please contact us / / If you have questions for exhaust regulations please ask US more photos and quotes on / / more pictures and offers at: more


komatsu wa...
every day

New machines via email!

Be informed!
2
Horizontal rotary table Fabr. WALTHER Masch.# 1036 Technical data: Table top dia. 350 mm Table height 115 mm Table bore 32 mm External dimensions approx. 600 x 500 x 115 mm Obbjlqyx with -concentric running to 4 T-slots -improvised stretcher or suspension device used, in good condition more
4
Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank Included in the scope of delivery: 01 x rear panel grid, needed Material color: white Width: approximately 2,680 mm Height: approx. 350 mm Mesh size: approx. 54 x 54 mm Rahmenprofilabm.: approx. 30 x 30 mm our services at a glance: (Prices on request) Kyopxfbz -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according t... more
1
SWE 4 in 1 bucket Fork Yrjj9c further on request individual financing possible more
6
Pressure: 350 t. Stroke rate: 15-40 stroke/min Stroke: 250 mm. Table: 3000 x 2000 x 200 mm 00inzuq2 more
6
Here we offer a water purification system. Flow rate: 70 L / hr Water Purification Method: RO ASTM Type: ASTM Type II TOC: 30 ppb Depth: 17.4 in Height: 28.9 in Width: 26.1 in Weight: 123 lbs (operational) Additional Specifications Power Supply: 117 V / 60 Hz, 10A, (10A Slo-Blo fuse) 230 V / 50 Hz, 5 A, (10A Slo-Blo fuse) 110 V / 50/60 Hz, 10A, (10A Slo-Blo fuse) system performance Water recovery: up to 50% Water resistivity *: 5 M -cm Water conductivity: 99.9% * CO2 5 M -cm * (Typically 10 -15 ... more
6
Hours of operation: 8840 Weight: 20000 kg -4.2 m³ bucket with U-blade -Tyres 60% - 70% good -Central lubrication system -Electric refuelling pump -power mirrors -Pfreundt scale WK 50 printer -Radio with CD -Climate -Seat with air conditioning and heating -Rear camera -AS -CE -4.2 m³ bucket with knife -tires 60% - 70% good -central lubrication -electric refueling - pump Dvwtou -electrical retractable mirror -Pfreundt balance WK 50 with printer -radio with... more
1
Metal circular saw Fabr. ELECTION type WK III. Fabr. # 10624 built in 1981 Technical data: Saw blade diameter 350 mm Cutting capacity 90 ° round 125 mm 90 ° rectangle 240 x 70 mm 45° rectangular 120 x 70 mm 2 speeds of 30 / 70 RPM. Power 1.0 / 1.6 kW External dimensions 630 x 600 x 1500 mm Weight 540 kg B0b9dbz0 with: -Saw blade through 360 ° adjustable -Longitudinal drawers and any miter possible -Cooling device used, in good condition more
4
for bending and prebending of cylinder + cone Plate width: 3500 mm Surface length of the roller: 3600 mm Distance between the column: 3700 mm Capacity at a yield point of material of 240 N/mm2 I8p9j3bk prebending: 38 mm bending: 48 mm Roller diameter Top roll: 650 mm Bottom rolls: 450 mm more
3
Waldrich Coburg MULTITEC 3500 ATM4 Milling machines 13250 x4500 Siemens CNC Siemens 840D CNC Racing CNC cross 2500 can work in sync with RAM race 13250x4500 (+1100 tool changer) passage uprights 3700 Light Table / wire cross 3500 passage between uprights 3700 No.2 6000x3000 boards each reach 25,000 Kg Total 50000 kg possibility of working uniforms or synchronized No.1 turning table diameter 3000 63 kw to 200 laps gear change Turning diameter max 3680 tool changing robot 206 HSK100A attack positi... more
6
Manufacturer: Idea Machine basket size B / H / T 1000 x 1000 x 900 mm heating: electric 18 kw pump: 4 kW Size: (Transportable) B: 2000mm L: 1800 mm H: 2650 mm There is no basket to! Gujkus more
6
Hours of operation: 8373 Weight: 13000 kg -High lift -HSW -3 control circuit -Bucket with new blade -Pfreundt scales WK 50XS -Tyres out foam Goodyear L5 -Rear camera -Central lubrication system -Protective ventilation -Heated seats -Climate -Radio with CD -CE High-lift 9kfiib98s -hydr. Quick-coupler -3 control circuit -Bucket with new knife -Pfreundt balance WK 50XS -tires foamed Goodyear L5 Reverse driving-camera -central lubrication -protection v... more
4
Watchmakers lathe Fabr. LORCH specifications: Tip height 65 mm Top width 350 mm 0.22 kW Electricity 380 V / 50 Hz Ptalfe with -Clamping Collet fixture -Crank support -Lever support -Collets -Three jaw Chuck -Clamping claw -Multiple steel holder used € 1.450,-- more
6
For sale : Air cooled water chiller Daikin Cooling power - 350 KW Refrigerant - r134a Year - 2012 Yp37vc Compressor- Mcquay-Daikin Screw type Compressors hours - 4668 Plate heat exchanger - Alfa Laval Axial fans-Ziehll Abbeg 6 pcs Controller-Daikin Microtech 3 Weight-3029 kg more
6
Hours of operation: 15019 Weight: 18000 kg – 3, 6 m³ bucket with cutting edge -Tyres 70%-80% good -Central lubrication system -Rear camera -Climate -Radio -AS -CE – 3, 6 m³ bucket with blade -tires 70%-80% good -central lubrication Reverse driving-camera -AIRCO -radio 9zw0xwdaf -AS -CE -For questions about emissions standards, please contact us / / If you have questions for exhaust regulations please ask US more photos and quotes on / / more pictures and of... more
1
Electrodes welding machine, Rectifiers, Welding current can be set from 5 to 350 a. Bsaj7i 200 A at 100% ED 260 (A) 60% ED 350 A 35% ED 380 V suitable for metal-arc welding and tungsten Schutzgassschweissen K-symbol = safety, even in vessels, boilers, vessels and premises with increased hazard of electric shock Space requirement approx. 1 x 0, 7 x 0, 6 m Weight approx. 190 kg good condition more
6
x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 2 m... more
5
groove width:16 mm x-travel:1000 mm throat:200 mm y-travel:150 mm z-travel:150 mm quill stroke:150 mm diameter of quill:100 mm table surface area:1300 x 250 mm Ey9lw9z spindle turning speed range:30 - 3500 U/min spindle taper ISO:40 rapid motion - x-axis:10000 mm/min total power requirement:3 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:2,5 x 1,8 x 2,3 m CNC control SIEMENS 810 M Indexing head HOFFMANN more
5
adjustable gear motor, variable speed gearmotor electric motor br / br / -Motorleistung 0.08 / 0.18 kW br / -Drehzahlbereich 17-350 U / min br / br -regelbar / -type B5 angle br / -diameter hollow shaft 25 mm br / - measuring 600/190 / H260 mm br / -weight 20 kg Y9vsizzel more
1
Siemens 6FC5250-6CY30-4AH0 NCU - system software, serial number according to the photo, used, low wear, 100% functional, included with com. photos 9s7diezjs more
6
Vehicle data - make: Auramo - type: KS12ZNA / / for white goods - new - drive type:-load capacity: 1200 kg - load Centre of gravity: 550 - lifting height: 0 mm - range: 0 mm - built: 2011 - operating hours: 0 - internal No.: BR635 _ Mast data - mast type:-lifting height: 0 mm - height: 0 mm - free lift: 0 mm - carriage: 0 mm - forks: 0 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 0 mm - weight: 805 kg _ Battery & charger - battery voltage: 0 V - battery AH: 0 Ah - batt... more
1
Manual welding inverter ESAB LHK 350, as well as other manuals available Qr3brn9w more
6
4-way S-stacker Fabr.HUBTEX type: MQ120 Su BJ. 2004 Payload. 12 000 kg. Lifting height: 2700 mm 8hcwtv3d7 Fork length: 1700 mm Hours of operation: 8990 more
5
groove width:16 mm x-travel:1000/1500 mm throat:200 mm Dvou2y y-travel:150 mm z-travel:150 mm spindle taper ISO:40 spindle motor:3 kW spindle turning speed range:300 - 3600 U/min quill stroke:150 mm diameter of quill:100 mm table surface area:1800 x 250 mm total power requirement:9,5 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:3,5 x 2,7 x 2,5 m CNC SIEMENS 810 M Indexing head with tailstock 4-fold toll changer table mounted more
5
Wastewater treatment plant, drilling water purification, chip separator, filter paper, paper band filter -Electronics is defective and therefore to sell the plant as a replacement carrier Delivery as is as seen Tank-1090/690/H410 mm 23c3i93do -Rührwerk of kw speed R/min -with non-woven belt filter belt -Flockers Dimensions 1500/800/H1800 mm Weight 188 kg more
2
We offer for sale: Make: SLP Lagertechnik 216 sites 9ytis2vm0 The rack system is in a top - condition Scope of delivery: material list for 216 pitches 18 fields = 20 uprights 3.350 x 1,000 mm 60 traverses 3,600 mm 12 traverses 3,900 mm 120 pins Technical data: Shelf depth 1000 mm maximum load per pair of traverse at 3,900 mm = 3,200 kg manufacturer: SLP Blue border color Color of the bars orange more
1
manual lathe Ernault-Somua Cholet 350 Mwtmfvu Cholet 435 Cholet 550 used Also available manual for milling machine Ernaul-Somua Z1C and ZHV1 more
6
Vehicle data - make: Auramo - type: KS12ZNA / / for white goods - new - drive type:-load capacity: 1200 kg - load Centre of gravity: 550 - lifting height: 0 mm - range: 0 mm - built: 2011 - operating hours: 0 - internal No.: BR637 _ Mast data - mast type:-lifting height: 0 mm - height: 0 mm - free lift: 0 mm - carriage: 0 mm - forks: 0 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 0 mm - weight: 805 kg _ Battery & charger - battery voltage: 0 V - battery AH: 0 Ah - batt... more
6
workpiece dia. over bed 600 mm hobbing length 4000 mm workpiece length - max. 4100 mm workpiece dia. over saddle 315 mm centre height 320 mm pitch 2 - 1000 mm number of teeth 4 - 100 turning speed range - spindle 0,004 - 80 U/min 3bvckmcb feed range 0,4 - 1600 mm/min milling motor 11 kW spindle diameter in front bearing 160 mm spindle passage 120 mm rapid traverse feeds 4000 mm/min electrics - voltage/frequency 380 / 50 V/Hz milling motor 11 kW max. module 6 (8) total power requirement ca. 3... more
4
Tool trolleys for bending tool, die, upper blade, upper tool, straight tool Tool trolley tool for a press brake -with several compartments Dimensions 1165/720/H1000 mm Weight 208 kg 3mkxuqqpz more
6
We offer for sale: Technical data warehouse platform: Total area: 344 m&Acirc &sup2 Floor space: 23.600 x 14,600 mm Top height flooring: 2,600 mm NET carrying capacity per square metre: 250 m&Acirc &sup2 Dcq8vn7rs 2 staircases of shipping throughout Germany possible. Please contact the freight costs. Installation service / shelf maintenance / installation. Replacement repairing etc. PURCHASE recovery, including disassembly. more
1
350 A, top condition, incl. electrode holder and work clamp, suitable with the appropriate accessories for Tig welding, incl. operating instructions and spare parts list Fzzsg7sm more
2
Used roll grinding machine Fabr. WALDRICH Siegen, type WSIIb-10 com 12316. Rev. 20.3.1968, part of overhaul and the new Cabinet in 2012. (also called reconditioned or CNC converted with 2 years warranty) TECHNICAL DATA Maximum grinding diameter / reel diameter approx. 1400 mm maximum measured tip height on the tailstock 700 mm maximum possible grinding length 5000 mm maximum distance tailstock to faceplate 5000 mm 2 grinding spindle speeds 420 / 1260 roller speed of stepless 18 - 70 RPM... more
6
Vehicle data - make: Linde - type: L12LHP SP / / HH 1785 mm initial lifting chariot - type of drive: electric - load capacity: 1200 kg - load Centre of gravity:-lifting height: 1785 mm - range: 0 mm - year: 2010 - operating hours: 4698 - internal No.: 483 _ 2uicg8c72 Mast data - mast type: standard - height: 1785 mm - height: 1370 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 180 x 60 mm _ Dimensions - length: 2390 mm - width: 750 mm - height: 1370 mm - weight: 1457 kg _ Batter... more
4
Pneumatic chain hoist, crane, crane, self-erecting crane, miniaturized chain hoist Qkwi0kvec -Tragkraft 500 kg Chain length 2800 mm more
4
x-travel 4000 mm y-travel 3000 mm z-travel 1200 mm c-axis 360 ° Qxajjlxkf b-axis 360 ° table load 35 t spindle taper ISO 50 spindle turning speed range 10 - 4000 U/min spindle motor 37/50 kW feeds longditudinal/cross/vertical 1 - 10000 mm/min rapid travel x/y/z 15000 mm/min spindle diameter in front bearing 140 mm distance table - lower edge spindle 1200 mm surface area 3500 x 1800 mm distance between columns 2300 mm max. torque on the spindle 2650 Nm control FIDIA M20 max. torque on the spin... more
2
Machine glue rollers for book production line 93reprq more


komatsu wa...
every day

New machines via email!

Be informed!

to

to

Change search
KOMATSU WA 350
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close