Used Krause for sale (91)

Condition: used, machine/vehicle number: 20048, Spindelpresse - Spindle Press Krause SP-SPressfläche / Pressing Size max. 500 x 600mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video Djdpfx Afsh Ayiasnskh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Kann zum Stanzen von Papier, Pappe und Aluminimum eingesetzt werden. Can be used for punching Paper, Cardboard and Aluminum. Stanzmaschine / Punching machine Krause FY 43 UB  Serial-No. 313200 Arbeitsbreite / Working width max. 400mm Zum Stanzen von Papier, Pappe und Aluminimum For punching Paper, Cardboard and Aluminum. 2 Hand-Auslösung / 2 Hand release mit Fußschalter pneumatisch zum Fixierung des Produktes with pneumatic foot switch for fixing the product Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Dkjdpfxsxu N Evo Afnjh On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Dkedpfjwtw E Dox Afnoh Beheizung mit Gas / Heating with Gas Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Dkjdpfx Afevi Hh Isnjh Online-Video-Inspection...

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Equipment: Krause autofeed die cutter Dksdpfsvfx Ulex Afnsh Max. Size: 60 x 50 cm (23 x 19 inch)

Condition: used, Format: 0x0 Equipment: Dkodpfx Aex Rh D Eefnoh Corner cutter

Condition: good (used), Karl Krause Large Bookbinding Press with Tapping Block The machine is fully operational and ready for operation. Dkedpfjx N I Hwox Afnjh Manufactured by Karl Krause, Germany. The press has a tapping block that increases the pressing force. Pressure: 5 tons Plate dimensions: 550 x 490 mm

Condition: good (used), Karl Krause Hot Stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. Djdpex N Dxvsfx Afnekh The work table is moveable. The device was purchased from a school workshop and has not been used in production. Power supply: 230V Heating plate size: 400x275mm. Weight: approx. 600kg.

Condition: used, Punching machine for, e.g., slipcases with many punching dies Dodjxw N Ntopfx Afnokh

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved Dkedpfjri Sicjx Afnjh If machines are in use, you have to crane to the machine and then back again to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m

Condition: used, Year of construction: 2007, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Sale of a container conveyor system with a pick-by-light system. The conveyor system extends over several sections and partial circuits (loops) over which the containers are transported. Year of construction and modifications during the years: 2007 Built by Hörmann Logistik 2016 Conversion of Loop 3 (complete renewal of the conveyor system, rollers, and control system) by Förster & Krause 2020 Complete renewal of the Pick By Light system by KBS 2021 Conversion of Loop 2 (complete renewal of the conveyor system, rollers, and control system) by Förster & Krause Loop 1 (Partial Loop 1 Conveyor System) - Main Loop - 2 stations for the adjacent floor storage area for storing full pallets - One lane for containers identified as non-conforming after inspection - A total of 20 empty containers are in circulation simultaneously Loop 2 (Partial Loop 2 Conveyor System) - 3 stations for push-through racks - 15 empty containers are in circulation simultaneously - Dimensions approx. 4m x 38m Loop 3 (Partial Loop 3 Conveyor System) - 2 stations For push-through racks - 15 empty containers in circulation simultaneously - Dimensions approx. 4m x 35m This is followed by 12 packing stations where the containers can be processed. From here, the packaged goods are packed into cartons and routed to 4 shipping lanes. Containers: The portfolio includes a total of 150 containers measuring 60x40x28cm. Pick By Light: KBS Pick By Light PTF series 7 zone displays 900 compartment displays 2 controllers/interfaces Terms of Sale: § 1 Subject of the Contract As already described, a container conveyor system and the Pick By Light system are offered for sale. The buyer acknowledges that this is a used system. Dkedpfx Afowa Tgqjnoh § 2 Purchase Price The purchase price is negotiable. VAT is deductible. § 3 Collection The buyer undertakes to dismantle the system at the seller's location, namely the site, at his own expense and responsibility. The dismantling of the system will take place at a time agreed upon between the parties, at least in writing. The agreed time must be chosen so as not to disrupt the seller's general business operations. The seller will grant the buyer access to the premises to dismantle the system, provided that all safety and access regulations of the seller are observed by the buyer. The risk of accidental loss shall pass to the buyer upon handover at the site. Handover shall take place at the latest when the buyer begins to dismantle the system independently. § 4 Warranty and Liability The buyer purchases the system as seen. The seller excludes any warranty or liability, regardless of the legal nature of the asserted claim, unless a guarantee has been given for the quality of the goods or a defect has been fraudulently concealed. This exclusion does not apply to claims for damages – regardless of the legal basis – if the seller, its legal representatives, or vicarious agents have breached their obligations through gross negligence or intent, nor to the mandatory liability without fault, e.g., under the Product Liability Act. § 5 Retention of Title Ownership of the contractual items remains with the seller until the purchase price has been paid in full.

Condition: good (used), Size max: 430 x 300 mm Book thickness: max 60 mm Dkedpfx Aod Tnh Ejfnjh Speed max: 6000 c/h Height: 1400 mm Width: 1600 mm Depth: 900 mm Weight: 560 kg (approx.)

Condition: ready for operation (used), Year of construction: 2003, A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible. Dksdpfx Asvtqq Ujfnoh

Condition: good (used), Year of construction: 1969, machine/vehicle number: 317594, cutting width (max.): 1,380 mm, Cardboard rotary board cutting machine, in working condition, new knives,... Dsdpfev A Rzlsx Afnjkh

Condition: used, Year of construction: 2013, Type Crack Maschine In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Dkedpjx N Nc Hofx Afnjh Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2012, operating hours: 70,936 h, clamping force: 4,200 kN, screw diameter: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm Dedpfx Ajyhby Hofnekh • Mold installation height (min): 380 mm • Opening stroke: 1020 mm • Daylight (platen distance): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on moving side (AS) + 2 on fixed side (DS) • Shut-off nozzle: 2-fold hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Stroke volume: 1810 ccm • Shot weight (PS): 1647 g • Injection flow (PS): 498 g/s • Plasticizing flow: 106 g/s • Screw L/D: 22.5 • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment • KM Linear robot, built in 2021 • Hot runner control, 12-zone • Mold sensors: Priamus (p=2 / t=0)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment Dkodeyhbq Eepfx Afneh • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: ready for operation (used), Year of construction: 2010, operating hours: 60,159 h, clamping force: 5,000 kN, screw diameter: 35 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details. • Clamping unit • Tool weight: DS 3950 kg / AS 5260 kg (total 7900 kg) • Min. tool diameter: 560 mm • Opening stroke: 1170 mm • Tool installation height: min 480 mm; max – • Max plate spacing: 1650 mm • Mounting plates (H × V): 1270 × 1200 mm • Clear column spacing: H 900 mm / V 800 mm • Centering ring diameter: 200 mm • Ejector • Stroke: 250 mm Dkedpfxoyg Hz Ho Afnsh • Ejection force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / controls • Core pull control: 2 (AS) + 2 (DS) • Closing nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12-port USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. stroke volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticizing rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle bore: 6 mm • Pump power / Heating power: 90 kW / 44 kW • Other • Max. crane load: 10 tons • 2K-capable: no • Filter nozzle/mill: no • Operating hours: 60,159 h Additional equipment • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z present

Year of construction: 2010, operating hours: 51,200 h, condition: ready for operation (used), screw diameter: 80 mm, This Krauss Maffei CX 650-3000 was manufactured in 2010. A robust hydraulic injection moulding machine, it features a screw diameter of 80 mm, 6 core pulls, and 6 pneumatic needle actuators. It includes an LRX 250 handling system with 4 vacuum and gripper circuits. Known defects include leaks and a non-regulating low-pressure pump. Contact us for more information about this machine. • Core pulls: 6 • Pneumatic needle actuators: 6 • Internal mold heaters: 12 • Cooling water circuits: 6 + 6 • Operating hours: approx. 51,200 h • Pump hours: approx. 61,500 h • Known defects: • Leaks at the upper operator-side frame • Leak at the injection unit Dkedpfx Aeyffcasfnoh • Low-pressure pump no longer regulates accurately Additional equipment • LRX 250 handling system • 4 vacuum circuits • 4 gripper circuits

Condition: ready for operation (used), Year of construction: 2011, clamping force: 4,200 kN, screw diameter: 80 mm, injection weight: 1,464 g, total height: 2,500 mm, overall weight: 25,500 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, product length (max.): 7,300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine. • Electrical data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating power: 36 kW Dkedpfx Ajydnp Hefneh • Rated pump motor power: 75 kW • Number of barrel heating zones: 7 • Performance and control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen dimensions: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Platen opening stroke: 1400 mm • Injection unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Condition: used, Krauss Maffei Motherboard Dsdpfx Afsu Axihenokh

Condition: new, It is new spare parts never used. Krauss Maffei MC 5 display M5V121 new never used Was bought for Krauss Maffei Dkjdpfx Afeygucfsnoh 2300 ton machine. M5-Anzeigeeinheit 12Z LxWxH 310x 360x60 mm 3600 g

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- 37 cm height-47cm length-8cm Dkjdpfjqvuicex Afnoh

Year of construction: 2016, operating hours: 32,000 h, condition: ready for operation (used), controller manufacturer: KRAUSS MAFFEI, screw diameter: 45 mm, This Krauss Maffei KME 45 XS was manufactured in 2016. It features a 45 mm screw diameter, high-performance single screw with a 36:1 L/D ratio, and operates at speeds up to 600 rpm. Designed for high-pressure extrusion, it handles thermoplastics and compounds with a throughput of 150-300 kg/h. Consider the opportunity to buy this Krauss Maffei KME 45 XS single screw extruder. Contact us for more information about this machine. Dkedjycvftjpfx Afnjh • Extruder type: Single-screw • L/D ratio: approx. 36:1 (XS = high-performance series) • Screw speed: up to approx. 600 rpm • Drive: AC motor with frequency control; high-torque design for compounding • Throughput: approx. 150–300 kg/h (depending on material and screw configuration) • Operating pressure: High-pressure extrusion capable • Material types: Thermoplastics, compounds, masterbatch • Motor upgrade in 2023 : The original motor was replaced in 2023 to increase the torque on the screw. The replacement was carried out by Krauss ken converter (price offer available)

Condition: used, Year of construction: 2003, clamping force: 1,500 kN, Equipment: documentation/manual, Injection Moulding Machine KM 150-700/C2 Dodpeyfm Ahefx Afnokh Clamping Unit 1. Clamping force: 1500 kN 2. Platen size (h × v): 780 × 790 mm 3. Tool opening stroke: 600 mm 4. Clearance between tie bars (h × v): 500 × 500 mm 5. Minimum mould installation height: 300 mm 6. Ejector stroke: 150 mm 7. Hot runner – number of zones used: 12 8. Control of pneumatic valve pins: 1 pc Injection Unit 1. Screw diameter: 45 mm 2. Injection pressure: 2336 bar 3. Maximum shot volume: 305 cm³ 4. Maximum shot weight (PS): 278 g 5. Cores: 2× hydraulic circuit (BAP) 6. Screw L/D ratio: 22