Krauss maffei buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
screw size:60 mm injection shot weight in Polysterol:618 g clamping force:2000 kN : INJECTION UNIT: screw size:60 mm max. swept volumne:679 cm³ injection shot weight in Polysterol:618 g/PS injection pressure:2.006 bar : CLAMPING UNIT: clamping force:200 t tie bar distance:560 x 560 mm mould hight min.:350 mm opening stroke:1.050 mm : CONTROL:MC5 microprocessor control: screen text:deutsch / german Manual:deutsch / german : EQUIPMENT: robot interface:Eurompa 67 core pull:2 x mould he... more
5
Injection molding machine, injection molding machine, plastic injection molding, plastic injection molding machine, clamping force Kunststoffspritzgiesspresse-250 to control Micro Control MC-3 opening stroke mm 820-sheet size 900 x 830 Machine weight 12.5 to Qkzt0ay2j more
3
screw size unbkt. mm injection shot weight in Polysterol unbkt. g/PS closing pressure 1800 kN total power requirement kW weight of the machine ca. t Mmhcl dimensions of the machine ca. m more
6
We offer: Injection moulding machine Krauss Maffei KM 110-390 C2 year 1998 with control MC3 and handling GeKU SR 250 S, incomplete, not operational The injection moulding machine was acquired as part of a takeover of an insolvent company. By the previous owner, parts were removed and used in other machines. She should be sold now. The injection moulding machine is not operational. Be sure to visit! A further not ready molding machine KraussMaffei KM 80-390 C2 model year 2000 with han... more
1
Injection molding machine Type: 80-340 C1 9ditpqvkg Year of construction: 1994 more
5
Directional valve, solenoid valve, hydraulic valve, pressure valve, valve block -Comes of an injection molding machine Krauss Maffei 1000 ton machines type KM 1000 / 5000A -valve manufacturer Bosch type 081WV10P1N126WS024 / 00AO type 0811 104 124 -max pressure 315 bar -voltage -Dimensions 850 / 600 / H550 mm -Weight 634 kg Sczgh8qk0 more
6
We offer: Injection molding machine KraussMaffei KM 80-390 C-2 built in 2000 with MC 4 control handling GeKu SR 250 S, incomplete, not operational The injection moulding machine was acquired as part of a takeover of an insolvent company. By the previous owner, parts were removed and used in other machines. She should now sold werdn. The injection moulding machine is not operational. Be sure to visit! A further not ready molding machine KraussMaffei KM 110-390 C2 built in 1998 with ha... more
2
1 syringe barrel KM 200 B2 built: 03.97 Xdha3kfjd Diameter: 45 mm KM number: 17 112 From the site: Schwäbisch Gmünd more
5
Injection molding machine, injection molding machine, plastic injection molding, plastic injection molding machine, clamping force 90 Kunststoffspritzgiesspresse-to-control Micro Control MC-3 opening stroke mm 610-sheet size 525/570 Machine weight 4.4 to Dyfaydl more
3
Krauss Maffei KM 80-180 EX Full electric year 2007 - full tested by manufacturer with certificate working hours Autom. 30320 h Controller: MC5 with manufacturer Test protocol confirmed very good condition. ***clamping unit*** clamping force: 80 tons / 800 kN distance tie bars: 420 x 420 mm opening stroke: 750 mm max. tool height: 150 mm/ 430 mm (min/max) tool platens: 650 x 650 mm centerring diameter: 125 mm (nozzle - ejector side) ***injection unit*** screw: 20 mm shot weight: 30 g w... more


krauss maf...
every day

New machines via email!

Be informed!
1
Krauss Maffei KM 180-1000 C3, battery Control: MC 4 Year of construction: 1999 Clamping unit Clamping force t: 180 Gap mm: 700 Holm dimension mm: 560 x 560 Bar2mce2mm Min/max height mm: 600 Plate size: 915 x 915 Injection unit Screw diameter mm: 55 Injection weight gr: 476 Injection volume cm ³: 523 Spray pressure bar: 1904 Dimensions and weights Dimensions Lxwxh m: 5.6 x 1.9 x 2.2 machine weight kg: 9,700 Miscellaneous new pump 2013 Euromap12 battery more
2
Stock no. 10156 Type of machine KM 800 - 5700 MC Year 1997 Controlversion MC3-F Dv2hti Screentext German Technical details Clamping unit Clamping force 8000 kN Mould opening force, max. 356 kN Travel force movable platen opening 106 kN Travel force movable platen closing 82 kN Size of mould platens (h x v) 1610 x 1250 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1400 mm Mould height min 600 mm Mould height max 1100 mm Max daylight 2000 mm Hydraulic ejector - stroke... more
4
1.0 piece used injection molding machine Manufacturer: KRAUSS MAFFEI Type: KM80-520C-1 Year of construction: 2001 Clamping force: 405 x 405 mm Screw diameter: 40 mm Part weight: 195 g / PS control: MC 4 Facilities: Dv2ghq Interface robot more
4
1 x amplifier card used Manufacturer: Kraussmaffei Type: PR201/PR202 C3kwklfk Year of construction: 2000 s/n: 5089180 Weight: 1.5 kg Technical data: Length: 425 mm Width: 235 mm Height: 30 mm Stock number: R1E2Nr4 Shipping: EUR 19.00 Terms of delivery: free loaded terms of payment: prior to pick-up more
6
2 piece Krauss Maffei injection Gala machine KM 60 CDE system Galaxy 2.5 to the CD / DVD / blue Ray press the CD sampling system is sold in parts BJ. 2003 for the CD / DVD production with 2 tool heads 9ylk9dbwh Reply by phone 01723488314 New price €800.000,- more
3
Krauss-Maffei KM 120-180 EX year: 2013 working hours Autom. 12392 h tested by manufacturer and confirmed excellent condition ***clamping unit*** clamping force: 120 tons/ 1200 kN tie bars distance: 570 x 470 mm (hxv) opening stroke: 850 mm max. tool height: 200/450 mm (min./max.) platens size: 805 x 747,5 mm (hxv) centerring nozzle side 160 mm centerring ejector side125 mm ***Injection unit*** screw: 28 mm shot weight: 67 g +++Extras:+++ -core pull 2 x (intern) -Pneumatic valve 1 an BWAP... more
2
Krauss Maffei KM 500/5700 BM Bar2izh7qb Control: MC3 F year: 1996 Clamping unit Clamping force t: 500 gap mm: 1650 Holm dimension mm: 900 x 800 Min/max height mm: 480 Plate size: 1340 x 1200 Injection unit Screw diameter mm: gr 95 injection weight: 2660 Injection volume cm ³: 2956 Spray pressure bar: 1931 Dimensions and weights Dimensions Lxwxh m: 12.45 x 2.97 x 2.39 Machine weight kg: 27,000/10,000 Miscellaneous ONI frequency converter 2 core cable more
2
Technical details Clamping unit Clamping force 1250 kN Mould opening force, max. 70 kN Travel force movable platen opening 35 kN Travel force movable platen closing 28 kN Size of mould platens (h x v) 745 x 770 mm Distance between tie bars (h x v) 470 x 470 mm Mould opening stroke 600 mm Mould height min 300 mm Max daylight 900 mm Hydraulic ejector - stroke 150 mm Ejector force 22 kN Injection unit Screw diameter 35 / 25 mm Injection pressure 2429 / 2500 bar Stroke volume 156 / 52 ccm Shot weig... more
5
1.0 St. used injection molding machine Manufacturer: KRAUSS MAFFEI Type: KM420-3500C-1 Year of construction: 2001 Clamping force: 420 tons Tie bar distance: 800 x 800 mm screw diameter: 90 mm Maximum shot weight PS: 1.777 g Control: MC 4 9vp3vzyhm Hours of operation: approx. 33.200 h Facilities: -1 x core pulling FAP -2 x core pulling BAP Interface robot more
5
1 x amplifier card used Manufacturer: Kraussmaffei Type: LV 200/LVR 10/AE1 LS Year of construction: 2000 s/n 5004322 Weight: 1.5 kg 7codmcrb Technical data: Length: 420 mm Width: 235 mm Height: 25 mm Stock number: R1E2Nr3 Shipping: EUR 28,00 Terms of delivery: free loaded terms of payment: prior to pick-up more
5
KRAUSS MAFFEI KM 150-1000C-1 Year of construction: 1999 Injection unit screw diameter: 55 mm displacement: CC 532 Shot weight: 476 g / PS Injection pressure: 1904 bar Clamping unit 150to. Clear width between columns: 500x500mm tool clamping plate sizes: 780x790mm ejector: hydraulic clamping unit: hydraulic Control: MC IV Fe7vwht08 Additional equipment EUROMAP Robot Schnitsstelle 3-core pulling Air valve x 2 Injection unit made of bimetal Hot channel control Weight: 7600... more
5
clamping force:150 t clamping force:1500 kN injection pressure:2022 bar robot interface:ja total connection power:35,0 kW max. swept volumne:377 cm³ microprocessor control:MC3-F opening stroke:620 mm screw size:50 mm injection shot weight in Polysterol:339 g CONTROL:MC 3 mould hight min.:450 mm total weight:9000 kg dimension L x W x H:6,2 x 2,1 x 2,1 m Cjhxjbpy more
3
Krauss Maffei KM 280-1400 C3 battery Control: MC4 year: 2000 Clamping unit Clamping force t 280 Gap mm: 820 Holm dimension mm: 630 x 630 Min/max height mm: 330 Plate size: 995 x 1050 Injection unit Barvh89fp0 Screw diameter mm: 60 Injection weight gr: 617 Injection volume cm ³: 678 Spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.1 x 2.2 x 2.3 Machine weight kg: 14,200 Miscellaneous 1 core pulling Euromap12, battery more
2
Year: 1996 Control unit: MC3-F Injection Unit: .../135 Screw diameter: 25 mm Injection pressure: 1725 bar Injection volume: 52 ccm Shot capacity: 47 g Clamping Unit: 40/... Clamping force: 40 t Platen size: 540 x 540 mm Distance between tie bars: 320 x 320 mm M7asv Mould height: 200 mm Opening storke: 350 mm Max.Daylight: 550 mm Ejector stroke: 100 mm Drive power of the hydraulic pump: 11 kW Cylinder heating power: 6 kW General information: Delivery time: Now Machine dimensions(m) LxWxH: 3,1... more
6
warehouse no.: 502320 manufacturer: KRAUSS MAFFEI Typ: KM 40-220 C1 Controller Unit: MC 4 year of construction: 1999 operating hours: 46402 h With the KM 40-220 C1, KRAUSS MAFFEI has launched a high quality and long lasting injection molding machine. This machine is build in 1999 and has an MC 4 control. With a tie bar width of 320mm x 321mm and a plate size of 540mm x 540mm it is ideal for your mould tool up to 40 tonnes of clamping force. Together with trained technicians, this injection mold... more
4
1 x used amplifier card/Control Panel Manufacturer: Kraussmaffei Type: PV 200 Year of construction: 2000 s/n: 5089961 Weight: 1.5 kg Technical data: Length: 420 mm Width: 235 mm Height: 25 mm Stock number: R1E2Nr5 Iqgderj Shipping: EUR 19.00 Terms of delivery: free loaded terms of payment: prior to pick-up more
5
KRAUSS MAFFEI KM 125-390C-2 year of production: 2004 Injection unit: screw diameter: 40 mm Shot weight: 185 g Injection pressure: 1860 bar Dispensing volume: CC 204 Clamping unit: clamping force: 125 t Tie bar distance: 470 x 470 mm Size of the clamping plates: 745 x 770 mm Ejector: hydraulic clamping unit: hydraulic control: MC IV. Additional equipment: EUROMAP Robot interface Core move x 1 Air valve x 2 Control hot-channel x 12 Injection unit made of bimetal B8ic9ys3 Pro... more
2
Technical details Clamping unit Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 116 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit Screw diameter 80 mm Ls/D ratio 23 Injection pressure 2205 bar Stroke volume 1543 ccm Shot... more
4
Krauss Maffei KM 450-3500 C3, ACCU Control: MC4 Year of construction: 1999 Clamping unit Clamping force t: 450 Gap mm: 1170 Holm dimension mm: 900 x 800 Min/max height mm: 480 Plate size: 1270 x 1230 Injection unit Screw diameter mm: 80 shot weight gr: 1544 Injection volume cm ³: 1754 Spray pressure bar: 2205 Beyn2dt Dimensions and weights Dimensions Lxwxh m: 7.98 x 2.35 x 2.55 machine weight kg: 26,000 Miscellaneous C3 system EUROMAP 12 InterfaceAccu more
1
Machinespecification Year: 2002 Injection Unit: .../160 Screw diameter: 25 mm Injection pressure: 2500 bar Injection volume: 52 ccm Shot capacity: 47 g Clamping Unit: 50/... 93iqm780h Clamping force: 50 t Platen size: 540 x 540 mm Distance between tie bars: 320 x 320 mm Mould height: 200 ... mm Opening storke: 350 mm Max.Daylight: 550 mm Ejector stroke: 100 mm General information: Delivery time: Now Machine dimensions(m) LxWxH: 3,3 x 1,3 x 1,8 m Weight: 2.500 kg Equipment: - 1 x Core pull ... more
3
clamping unit clamping force: 1100 kn clamping plate: 745x770 mm clear span: 470x470 mm M3p2l clamping unit stroke max.: 600 mm installation height min.: 300 mm diameter of centering ring: 125 mm ejector stroke: 150 mm tool weight max.: 1490 kg injection unit screw diameter: 40 mm ideal workpiece volume (ccm) min.: 50 - max. 151 equipment core pulls DS: no core pulls AS: 3 air ejector: 1 more
3
concerning description attached 9zl8lhshu more
6
KRAUSS MAFFEI KM 125-520 C2 Year of construction: 1999 Injection unit: Screw diameter: 45 mm Shot weight: 250 g Injection pressure: 1878 bar Metering capacity: 275 cc Clamping unit: Clamping force: 125 t Tie bar distance: 470 x 470 mm Size of the clamping plates: 745 x 770 mm Ejector: hydraulic clamping unit: hydraulic control: MC IV. Additional equipment: EUROMAP Robot interface Core move x 1 Baobjsqkcy Air valve x 2 Injection unit made of bimetal Parallel movements Ma... more
2
Technical details Clamping unit Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 116 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit Screw diameter 90 mm Ls/D ratio 20 Injection pressure 1742 bar Stroke volume 1952 ccm Shot... more
1
Clamping unit Clamping force t 500 Gap mm: 1260 Holm dimension mm: 900 x 800 Min/max height mm: 90 Plate size: 1270 x 1200 Injection unit Screw diameter mm: 80 shot weight gr: 1304 Injection volume cm ³: 1433 spray pressure bar: 1829 Control: MC4 Dimensions and weights W8dzgfsj Dimensions Lxwxh m: 7.4 x 2.33 x 2.5 machine weight kg: 17,000 Miscellaneous Seprorobot 3041 BZ S900-II more
2
Machine specification Year: 2000 M2e7j Control unit: MC4 Injection Unit: .../220 Screw diameter: 30 mm Injection pressure: 2025 bar Shot capacity: 96,5 g Clamping Unit: 50/... Clamping force: 50 t Distance between tie bars: . mm Mould height: 200... mm Opening storke: 550 mm Max.Daylight: 750 mm Ejector stroke: 100 mm General information: Delivery time: Now Machine dimensions(m) LxWxH: 3,4 x 1,3 x 1,9 m Weight: 2,3 kg more
3
Injection unit Krauss Maffei size 700 Eta7si7 complete with screw cylinder 50 mm Ø, complete with all valves and servo motor more
1
Manufacturer/manufacturer: Krauss Maffei KM 320 C3 1900 sprinter Typ/type: KM 320 C3 1900 sprinter Year/year: 2001 Control/controller: MC Clamping force/clamping force: 320 to Holmabstand/Dist.Betw.Tiebars: 710 x 710 mm WZ height/mould hight: min 380 mm Opening/opening stroke: 920 mm Auger/screw size: 70 mm 9w22bwng2 Stroke volume/shot volume: 953 gram / PS spec. Spritzdr / injection pressure: 1778 bar / Engine of hours of operation hours 22 000! General / General engine/motor po... more
5
KRAUSS MAFFEI KM 150-1000C-1 Year of construction: 1999 Baobiv3zgv Injection unit screw diameter: 55 mm displacement: CC 532 Shot weight: 476 g / PS Injection pressure: 1904 bar Clamping unit 150to. Clear width between columns: 500x500mm tool clamping plate sizes: 780x790mm ejector: hydraulic clamping unit: hydraulic Control: MC IV Additional equipment EUROMAP Robot Schnitsstelle 3-core pulling Air valve x 2 Injection unit made of bimetal Hot channel control Weight: 760... more
4
Technical details Clamping unit Clamping force 2000 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 350 mm Max daylight 1050 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit Screw diameter 45 mm Ls/D ratio 22 8zri2worr Injection pressure 2336 bar Stroke volume 305 ccm... more
4
MachineKrauss Maffei KM 800 MC-3 Tnwutcmd more
2
machine specification Year: 1995 Control unit: MC3 F Dnboiaacu Injection Unit: .../340 C1 Screw diameter: 35 mm Injection pressure: 2159 bar Injection volume: 156 ccm Shot capacity: 142 g Clamping Unit: KM 110/... Clamping force: 110 t Platen size: 760 x 760 mm Distance between tie bars: 470 x 470 mm Mould height: 300 ... mm Opening storke: 600 mm Max.Daylight: 900 mm Ejector stroke: 150 mm General information: Delivery time: Off hand Machine dimensions(m) LxWxH: 4,5 x 1,5 x 2,0 m Weight: 8... more
3
oil-cooled engine Krauss Maffei No. 6445689 45 kW 50 Hz 9o0futhki 1478 1/min more
3
technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: four tie bars clamping force: 3200 kN distance between tie bars h: 730 mm distance between tie bars v: 710 mm size of mould plates h: 1060 mm size of mould plates v: 1095 mm min. mould height: 580 mm max. open daylight: 1300 mm opening stroke: 720 mm technical data:injection unit 9axkk0fzo screw diameter: 50 mm swept volume: 432 ccm injection pressure: 2304 bar Working hours... more
6
KRAUSS MAFFEI KM 200-1000 C1 Year of construction: 1997 Injection unit: Screw diameter: 60 mm Baobgter0o Shot weight: 566 g Injection pressure: 1600 bar Dispensing volume: 622 cc Clamping unit: Clamping force: 200 t Tie bar distance: 560 x 560 mm Size of the clamping plates: 915 x 915 mm Ejector: hydraulic clamping unit: hydraulic control: MC IIIF Additional equipment: EUROMAP Robot interface Hydraulic core pulling x 1 Air valve x 2 Hardened Spritzaggragt - bimetal Dim... more
4
Clamping unit Clamping force 800 kN Mould opening force, max. 55 kN Travel force movable platen opening 31 kN Travel force movable platen closing 20 kN Size of mould platens (h x v) 610 x 610 mm Distance between tie bars (h x v) 405 x 405 mm Mould opening stroke 500 mm Mould height min 250 mm Max daylight 750 mm Hydraulic ejector - stroke 150 mm Ejector force 22 kN Injection unit Screw diameter 40 mm Ls/D ratio 23 Injection pressure 2377 bar Stroke volume 217 ccm Shot weight 198 g Injection rat... more
3
KM 80-520 C1 Stock number: 1207 Type of machine: injection molding machine Year of construction: 1998 Brand: Krauss Maffei Type: KM 80-520 C1 Cargo base: EXW D-31535 Neustadt Shipping time: On request Technical data Closing force 800 kN Clamping plate 610 x 610 mm Tie bar distance of 405 x 405 mm Height 250 mm Plate clearance 750 mm Control MC3 Teletext in German Hours of operation 94000 Splash page Screw diameter 45 mm Stroke volume 275 cc Injection pressure 1878 bar... more
3
machine specification Year: 2001 Control unit: MC4 8wfbhvfol Injection Unit: .../160 Screw diameter: 25 mm Injection pressure: 2500 bar Injection volume: 52 ccm Shot capacity: 47 g Clamping Unit: 50/... Clamping force: 50 t Platen size: 540 x 540 mm Distance between tie bars: 320 x 320 mm Mould height: 200... mm Opening storke: 350 mm Max.Daylight: 550 mm Ejector stroke: 100 mm General information: Delivery time: Now Machine dimensions(m) LxWxH: 3,2 x 1,3 x 1,8 m Weight: 2.300 kg Equipment... more
2
Operating voltage: 400V, control voltage: 230V, frequency: 50Hz, including raw material tank: Capacity: 294l, weight: 300kg. Ckcsqy2s more
5
Krauss Maffei KM 150-700C1 Lyhcl year: 2003 controller: MC4 screw diameter 55 mm distance tie bars: 500 x 500 mm platens diameter: 780 x 790 (hxv) shot volume: 456 ccm shot weight: 415 gr injection pressure: 1564 bar opening stroke: 600 mm mold height 300 mm max. distance platens 900 mm weight: 7100kg working hours: 53700 std. Extras: -high wear resistance screw -pneumatic valve at variable plate -security door at nozzle -robot interface Euromap 18 at variable plate with intermediate plate... more


krauss maf...
every day

New machines via email!

Be informed!

to

to

Change search
KRAUSS MAFFEI
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close