Used Laimet 120 for sale (16,316)

Condition: used, Rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators -Actuator for: gate valves, locks, ball valves ... -Construction: hollow shaft -Diameter hollow shaft: 120 mm -Number: 3x drives available Lhjdpfxjcnzrue Agzer -Price: per piece -Dimensions: 1700/500/H650 mm -Weight: 450 kg

Year of construction: 2014, condition: used, Max. punching force: 50 kN Stroke activation via foot switch Lhedpfx Agjwb Eucozor

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW Lsdpsma Dkfofx Agzohr two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: used, Year of construction: 1980, max. wheel diameter 1010 mm gear width 0 mm max. module min. module total power requirement 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Lhsdpot Hwnijfx Agzor Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.

Condition: new, Year of construction: 2024, functionality: fully functional, Alternative and original spare parts for all types of starting air, piston and screw compressors. Lhedpfxowhb N Nj Agzor Sperre, Hatlapa, Sauer Sohn, Hamworthy, Ervor, Espholin, Alkin, Atlas Copco, Ingersoll Rand, Kaeser.

Condition: used, Year of construction: 2005, machine/vehicle number: 05-05, SECOND-HAND PREBENDING PRESS VECCHIATO MOD. SN2000/120 - Working table length 2000 mm - Thrust 57 Ton - Min / max working length 500/1500 mm - Maximum working thickness 40 mm - Lower bench of flexible steel sheets Lsdpfowrz H Aox Agzshr - KW 2.2 - Volt. 380/50 - S/N 05-05 - CE rules year 2005

Condition: used, Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 100 mm -Dimensions: see photo techn. drawing -Dimensions: 250/120/H63 mm -Weight: 10 kg Lhjdpfx Agein Hrqezsr

Condition: reconditioned (used), functionality: fully functional, used L-shaped mixer Diosna 120, overhauled, for 120 kg dough, 2 new digital timers, stainless steel bowl, electrics renewed, newly painted, new bearings, new V-belts Lodpfx Agewliykozehr

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible. Lsdstx Dpfjpfx Agzjhr

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Bruderer roll feed, BBV 202/120, left-hand side, suitable for installation on BSTA 25/250 or BSTA 50/500 presses Feed length 0-120 mm Roller width 120 mm Strip inlet width max. 203 mm Lhjdpfxsw S Hv Ie Agzer Strip thickness max. 6 mm Feed length adjustment motorized. Fully overhauled in 2025. Available for immediate delivery. Also in stock are other feeder models, such as BBV 190/85, BBV 195/85, BBV 205/120, BBV 320/200 etc. Please contact us for more information!

Condition: ready for operation (used), Year of construction: 2014, Machine equipped with 25 mm 3 hook knives 2 pieces planetary gearboxes with 15 KW power each and a control system with PLC and overload/reverse operation. Lodpfx Asiwgd Ssgzehr

Condition: good (used), Year of construction: 2012, functionality: fully functional, filter area: 120 m², volume flow: 18,000 m³/h, Filter hose length 2000 mm Mechanical/pneumatic shaking Base assembly with agitator and screw discharge Lhedpowhlkwefx Agzsr Gear motor 2.2 kW Connection for briquette press with air recirculation

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: marking plate, clamping plate, straightening bench ... Lsdpfx Agjdyk A Tozjhr -Number: 1x prisms available -Price: per piece -Dimensions: 1 piece 100/120/H60 mm -Weight: 5 kg/piece

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 66 m³/h, operating pressure: 120 bar, type of cooling: air, Equipment: documentation/manual, type plate available, 1 high-pressure piston compressor including acoustic hood and 1500 liter compressed air tank Ran trouble-free until the entire production was shut down. Manufacturer: J.A. Becker & Söhne Lsdpfx Agovgrp Sezehr Type: SV 1101/120 Number of cylinders: 3 Number of pressure stages: 3 Volume flow: 66m³/hour Compression pressure: 120 bar Drive power: 22 KW Speed: 1457 rpm Year of construction: 1998 Compressed air tank Manufacturer: FMS Capacity: 1500 liters Operating pressure: 120 bar Year of construction: 1998 Product data sheet as PDF attached under the ad description !!!

Condition: refurbished (used), functionality: fully functional, load capacity: 120 kg, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Lhsdperqf Tcofx Agzjr Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: good (used), Year of construction: 2009, Line for the production of "B" type energy-absorbing barriers, SIGMA posts and semi-closed channels Lhedpfxet Ak Dpe Agzer For 460 x 4.2 mm strip. Weight of the whole set about 25,000 kg. The line includes the following sections: Strip uncoiler with hydraulic jack for new coils. 1 roller unit + guillotine. Manipulator. Welding area. Rolling section: -rollers for profiling SIGMA post, -rollers for the "B" guide and the semi-closed channel. Bean punching machine. Punching machine for top holes. Punching machine for bottom holes. Controller with display. Instruments for SIGMA post. Instruments for semi-closed channel. Instruments for marking.

Condition: refurbished (used), functionality: fully functional, Mechanical roller feed BBV202/120 for attachment to BSTA25 or BSTA50 Left-hand attachment Drive via main shaft / cardan shaft of the press - cardan shaft / mounting plate is not included in the scope of delivery Mechanical feed length adjustment via spindle PTO shaft protection system tube Lhedpor Hmpcofx Agzjr Including encoder attachment

Condition: good (used), functionality: fully functional, machine/vehicle number: FPMU330/120, PRESS IN GOOD CONDITION, PERFECTLY WORKING. 3 areas each measuring approximately 70x100 Lhodpfevtyd Rsx Agzer TRANSPORT AND ANY PREPARATION FOR TRANSPORT AT THE EXPENSE OF THE PURCHASER

Condition: used, Heating, gas and oil burners, burner control, burner flap control, flue gas flap control -Burner control: Flap control burner -Type: unfortunately no type designation -Shaft: Ø 12 x 25 mm -Hole spacing: 50/65 mm M6 -Dimensions: 120/120 / H140 mm -Weight: 1.5 kg Lsdpshibmgsfx Agzohr

Condition: new, High Performance, High Accuracy pH & ORP. The InPro 3253i SG/120 is a digital, pre-pressurized, low maintenance ISM pH & ORP sensor combined with a temperature sensor for in-line measurement in demanding applications. The 120 mm version is optimal for short installation lengths. Optimized for Steam Sterilization The steam-sterilizable pH glass membrane of the InPro 3253i SG/120 makes it optimal for processes where sterilization or autoclaving are required. Lhodpfx Agoh Rulhezer Low Maintenance and Easy-to-Use This digital pH sensor has Intelligent Sensor Management (ISM) technology, offering predictive diagnostics to reduce maintenance and calibration. Sterilizable and Autoclavable This sensor provides fast and precise pH and ORP measurement, even after repeated autoclaving and sterilization cycles.

Condition: refurbished (used), functionality: fully functional, Mechanical roller feed BBV202/120 for attachment to BSTA60 Left-hand attachment Drive via main shaft / cardan shaft of the press - cardan shaft / mounting plate is not included in the scope of delivery Mechanical feed length adjustment via spindle Lhjdpfjr Hmnmsx Agzjr No encoder attachment available

Condition: used, Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 120 mm Lhodjd Ep U Hepfx Agzer -Piston diameter: 38 mm -Piston rod: 20 mm -Total length: 305 mm -Total length extended: 425 mm -Price: per piece -Number: 10x available -Dimensions: 80/80/H305 mm -Weight: 2.9 kg/piece

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: mm -Dimensions: 60 x 120 mm -Length: 415 mm -Weight: 10 kg Lsdpfxjctq Nqj Agzjhr

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR Lhodpfed Dkzrsx Agzjr -Type: SMD 101/120 -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg

Condition: ready for operation (used), Year of construction: 2010, General Data Machine weight 7000 kg Dimensions Machine Length 5000 mm Injection Unit Screw diameter 40 mm Ledpfx Agox Nkpuozjhr Clamping Unit Clamping force 1195 kN This Engel Victory 500/120 Tech was manufactured in 2010. It features a clamping force of 120t and a screw diameter of 40 mm. The machine has a minimum mold size of 300 mm, an opening of 500 mm, and a daylight of 800 mm. Dimensions are 5m x 1.7m, weighing 7 tons. Consider the opportunity to buy this Engel Victory 500/120 Tech hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding