Used Lms for sale (147)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 98043, saw blade diameter: 400 mm, rotational speed (max.): 3,000 rpm, overall weight: 200 kg, clamping width: 220 mm, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Saw Unit Maximum saw blade diameter: 400 mm Bodpfxew Hr Hve Ab Usda Maximum clamping width: 220 mm Maximum speed: 3,000 rpm Cutting Range Material cross-section at 90° solid round: 60 mm Material cross-section at 90° tube: 140 mm Cutting size at 90° (square): 110 x 110 mm Cutting size at 90° (rectangular): 180 x 100 mm Cutting diameter at 45° solid round: 60 mm Cutting diameter at 45° tube: 130 mm Cutting size at 45° (square): 100 x 100 mm Cutting size at 45° (rectangular): 150 x 100 mm Stop length max.: 2,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,200 x 1,900 mm Weight: 200 kg EQUIPMENT Roller conveyor Note: The left-side roller conveyor with stop is included in the scope of delivery. The right-side roller conveyor is not included.

Year of construction: 2000, condition: used, Saw blade diameter: 350 mm Pneumatic material clamps Bjdpfx Abeyx Hmuo Uoda Micro spray device The sawing table can rotate in both directions

Year of construction: 1967, condition: used, machine/vehicle number: 9317, disk of circular saw-Ø: 275 mm cutting area at 90°: 120 x 75 mm cutting area at 45°: 90 x 65 mm Bodpfx Asb N Eicob Ujda rotations of disk: 2000 rpm engine: 380 V, 1,1 kW space needed: 700 x 900 x 1000 mm

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, total height: 1,900 mm, This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. • Max stroke rate: 350 1/min • Max material width: 60 mm • Standard center ram force: 20 KN • Standard center ram stroke: 45 mm • Air pressure for pneumatic clutch: 6 BAR • External dimensions of the machine (WxHxD, without protective cabin): 2000×2000×900 mm • External dimensions of the control cabinet (WxHxD): 1000×2200×600 mm • Drive: Asynchronous main spindle motor 10.6 kW / 71.3 Nm @ 760 rpm • Reduction ratio: 1:5.09 • Clutch: Unit brake (mechanical) / clutch (pneumatic) • Power: adjustable from 20 rpm to 350 rpmMachine under power Additional equipment • NC roller feeder (feeding length freely programmable) Bdedpfxox D Efqo Ab Uea Dimensions Machine Depth 2450 mm

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, total height: 1,700 mm, overall weight: 3,550 kg, controller manufacturer: FANUC, controller model: i – SMART PLUS, product length (max.): 2,970 mm, number of axes: 3, This Hyundai WIA SE 2200 LM was manufactured in 2025. It features a maximum turning diameter of Ø300 mm and a length of 529 mm, with a spindle speed of up to 6,000 rpm. The machine includes a 12-tool turret and supports milling with a tool speed also up to 6,000 rpm. Ideal for precision turning and milling tasks. Contact us for more information about this machine. • Condition: Original packaging, 0 operating hours • Capacity • Max. swing: Ø600 mm • Swing over the carriage: Ø390 mm • Max. turning diameter: Ø300 mm • Max. turning length: 529 mm • Bar capacity (main): Ø32 mm • Chuck size (main): 5 • Spindle (Main) • Spindle bore: Ø42 mm • Motor (max/cont.): 7.5/3.7 kW (10/5 HP) • Torque (max/cont.): 63.6/23.6 Nm (46.9/17.4 lbf·ft) • Spindle nose: A2-5 • Spindle type: Flat type • C-axis indexing: 0.001° Bdodpoycv Egsfx Ab Uea • Feed • Rapid traverse rate (X/Z): 15 m/min • Slide type: Roller LM guide • Turret • Number of tools: 12 (24) • Tool size (OD/ID): Ø20/Ø32 mm • Indexing time: 0.15 sec • Live tool • Milling tool speed: 6,000 rpm • Motor (max/cont.): 3.9/2.6 kW (5/3.5 HP) • Torque (max/cont.): 36.7/18.5 Nm (27.1/13.6 lbf·ft) • Collet size: ER20 (Ø13 (0.5")) • Type: BMT45 • Tailstock • Taper: MT#4 • Quill diameter: Ø55 mm • Travel: 580 mm • Tank capacity • Coolant tank: 200 l • Lubricating tank: 0.7 l • Power supply • Electric power: 23 kVA • Power cable thickness: Over 16 mm² • Voltage/frequency: 220 V, 50/60 Hz

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: FANUC, controller model: 21‑i TB, This 4-axis HYUNDAI KIA SKT 21 LMS was manufactured in 2014. It features a Fanuc 21-i TB control unit, a maximum machining diameter of Ø 254 mm, and a length of 531 mm. The spindle speed reaches up to 6,000 rpm, and it includes a 12-position tool magazine and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the HYUNDAI KIA SKT 21 LMS machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Number of axes: 4 (x, z, c, b) /x axis travel: 221 mm /z axis travel: 549 mm • Max. Machining diameter: Ø 254 mm/ max. Machining length: 531 mm • Tool magazine: 12 positions Bedpoyaln Eofx Ab Usda • Equipment: chip conveyor /bar feeder: top automazioni mod. Magic

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 5,000 rpm, travel distance Y-axis: 100 mm, total height: 2,080 mm, overall weight: 8,500 kg, product length (max.): 3,650 mm, number of axes: 4, This 4-axis Hyundai WIA LM 1800 TTSY was manufactured in 2025, featuring a maximum turning diameter of Ø230 mm and length of 673 mm. It boasts a spindle speed of up to 5,000 rpm and a bar capacity of Ø65 mm. The machine includes a built-in motor spindle, dual 12-tool turrets, and rapid traverse rates ensuring efficient operations. Ideal for complex turning tasks. Contact us for more information about this machine. • Packaging: Original packaging • Capacity: • Swing over carriage: Ø290 mm • Max. turning diameter: Ø230 mm • Max. turning length: 673 mm • Bar capacity (1st/2nd): Ø65 mm • Chuck size (1st/2nd): Ø210 mm • Spindle: • Spindle bore (1st/2nd): Ø76 mm • Motor (Max/Cont.) (1st/2nd): 22/11 kW (30/15 HP) • Torque (Max/Cont.) (1st/2nd): 358/214 Nm (264/158 lbf ft) • Spindle type: Built-in motor Bjdpfx Absycvzbj Usda • Spindle nose: A2-6 • C-axis indexing (1st/2nd): 0.001° • Feed / Axes: • Travels (X1/X2): 165/195 mm • Travels (Z1/Z2): 700/720 mm • Travel (ZB): 668 mm • Rapid (X1/X2): 20/20 m/min (787/787 ipm) • Rapid (Z1/Z2): 40/40 m/min (1,575/1,575 ipm) • Rapid (Y): 7.5 m/min (295 ipm) • Rapid (ZB): 40 m/min (1,575 ipm) • Slide type (X/Y): Box guide • Slide type (Z): LM guide • Turret: • No. of tools: 2 × 12 (24) • Tool size (OD): Ø20 mm • Tool size (ID): Ø32 mm • Indexing time: 0.15 sec • Y-axis type: Wedge type • Live tool: • Milling tool speed: 5,000 rpm • Motor (Max/Cont.): 5.5/1.1 kW (7.4/1.5 HP) • Torque (Max/Cont.): 47/14 Nm (34/10 lbf ft) • Collet size: ER25 • Type: BMT55 • Tank capacity: • Coolant tank: 300 L (79.3 gal) • Lubricating tank: 4 L (1.06 gal) • Power supply: • Electric power: 60 kVA • Power cable thickness: Over 50 mm² • Voltage: 220/60 (200/50) • NC / Controller: FANUC 31i-B Plus / SIEMENS 840D

Condition: used, Year of construction: 2004, Overview  This cold glue labelling machine was manufactured in 2004 by German company KHS. The machine was running until January 2025 and is now stored in the company. The labeller has a camera system for the orientation of the labels in the neck area for swing-top glass bottles. Technical data  Capacity: Up to 26,000 bottles per hour Working direction: anticlockwise Formats: 330 ml Longneck glass bottles 330 ml Steinie glass bottles 330 ml Swing-top glass bottles 500 ml NRW glass bottles Label positions: Front (up to 2 labels) Back (up to 1 label) With a Siemens S7 control New HMI touch panel in 2019 Bedjwhwwvspfx Ab Usda

Condition: good (used), Year of construction: 2008, Comparable to Elumatec, Mecal, Fom, Pertici, etc. Ideal for processing insect screen systems! For saw blade diameter 500 mm, cutting length 5000 mm. Double mitre saw with pneumatically outward swiveling heads, designed for cutting aluminium and PVC profiles. The right, movable saw unit positions itself automatically to the profile length entered in the control panel. Scope of delivery includes all necessary safety devices as well as vertical and horizontal clamping devices. Head Swiveling The heads are swiveled via pneumatic cylinders. Mitre cuts can be made from 90° to 22.5° outward. Intermediate mitre angles can be set manually using a stop device. The cutting area is equipped with automatically opening and closing safety covers. Profile support roller conveyor at the movable unit with clamping device Spray misting system with macro function Bodpfx Aboxgpvro Uoda A compatible extraction unit is also currently available as an option!

Condition: used, Year of construction: 1989, saw blade diameter 350 mm Bedpexabw Ujfx Ab Uoda cutting diameter 115 mm capacity 90 degrees: flat 200 x 80 mm turning speeds 1700/3400 U/min saw-blade dia. 350 x 3.3 x 40 mm motor 400 Volt total power requirement 1.8 / 2.6 kW weight ca. 600 kg range L-W-H 1000 x 850 x 1500 mm - in checked condition - machine video - ?v=k-VA1e8rSJI Equipment: - semi-automatic aluminum circular saw - pneumatic material clamping - stepless adjustment of the saw head lowering speed - machine table with miter adjustment - machine base frame

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW Bdjdpfx Aou Nigksb Uea weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: ready for operation (used), Year of construction: 2007, Manual light metal circular saw Metallkraft LMS 400 - Working condition - Year of manufacture: 2007 - Spare saw blade included Bjdpfx Abjx Tz R Ds Uoda - Can be tested on-site under power - Shipping via freight company available at extra cost - On-site loading with forklift - Invoice with VAT included

Year of construction: 1999, condition: used, Saw blade diameter: 300 mm Manual material tensioner Minimum quantity spray device 120 kg Bodpfx Asw Im Trsb Ueda

Condition: used, Year of construction: 1991, bar material dia. 65 mm bar length 3000 mm voltage 400 V weight of the machine ca. 1,2 t dimensions of the machine ca. 5,32 x 0,95 x 1,52 m Bedpfehuf Stjx Ab Ujda

Condition: used,

Condition: excellent (used), functionality: fully functional, power: 1.5 kW (2.04 HP), color: yellow, overall weight: 30 kg, Year of construction: 2020, machine/vehicle number: 2012241648399, Professional condenser dryer for storage rooms, construction sites... Bedpjyybiaefx Ab Ueda

Condition: not inspected (used), Year of construction: 1971, functionality: unexamined, overall weight: 150 kg, rotational speed (max.): 2,800 rpm, grinding wheel width: 30 mm, grinding wheel diameter: 180 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item on time either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Speed: 2,800 rpm Grinding wheel diameter: 180 mm Grinding wheel width: 30 mm Bdjdpfx Abjyn E Izo Usa MACHINE DETAILS Operating voltage: 220/380 V Frequency: 50 Hz Connected load: 0.8 kW Dimensions & Weight Dimensions (L x W x H): 540 x 500 x 1,500 mm Weight: 150 kg External reference: Pieper – Lot 69

Condition: good (used), Item: AV-12170-71-Vertical30m3Tanks Bjdpfjvdcmisx Ab Usda Stainless Steel vertical insulated tank Exterior dimensions: Dia Ø 3200/3450 mm Total H 6000 mm. Cylinder height 5000 mm. Vertical, insulated stainless steel tanks - 2 pcs. Year 1986. Brand: Wedholms Sweden Flat sloaping bottom with 3" outlet. Conical top with ventilation / cip. Manhole in lower part of cylinder. Side mounted agitator. AISI 304

Condition: used, Year of construction: 1977, weight max. 2 t stroke 5000 mm clamping width 5000 mm Side crane with 6 meter projectionLength rail system approx: 60 meters The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Bedpfsyutvtex Ab Ujda Your Markus Hirsch Team

Condition: used, Year of construction: 2022, Sweepers Mast type: None Battery voltage: 12V Battery Ah: 85Ah Description: Scrubbing performance approx. 1750 m²/h Speed: 3.5 km/h Working width: 500 mm Squeegee width: 730 mm 1 round polypropylene brush 40 l fresh water tank 45 l dirty water tank 2 batteries: 24 V / 2 x 12 V Integrated charger Weight: 99 kg Dimensions: Length: 821 mm, Width: 576 mm, Height: 1220 mm Adjustable handle Bodox Sa E Depfx Ab Usda

Condition: used, functionality: fully functional, tank capacity: 100,000 l, Item: AV-12243-Wedholms-100m3 Exterior dimensions: Dia Ø 3800 mm, Total height 11000 mm. Vertical stainless steel tank – 1 pc. Bedpfx Aboyi E Hto Uoda Insulated with 100 mm and finished with a white trapezoidal plate. Side-mounted agitator and CIP system. Brand: Wedholms Material: AISI 304

Condition: used, machine/vehicle number: 423. 1245102, 4-strand flyer with reversing beam Bdodpjylzlksfx Ab Usa Wire diameter: 0.05 to 1.0 mm 2-strand flyer with reversing beam Winding diameter: 90 mm, traverse width: 120 mm Max. wire diameter: 1.0 mm

Year of construction: 2021, condition: like new (used), functionality: fully functional, SLM Solutions Model: SLM 280 Build envelope (L x W x H): 365 x 280 x 280 mm (minus substrate plate thickness) 3D Optics Configuration: Twin (2x 400 W) Variable layer thickness: 20 µm - 90 µm Min. feature size: 150 µm Focus diameter: 80 µm - 115 µm Max. scan speed: 10 m/s Average shielding gas consumption during build process: 16 l/min (argon) Average shielding gas consumption during flooding process: 250 l/min (argon) Powder feed: 60-90 kg Bdodpfx Aeyqx R Ijb Usa Electrical connection / Power consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement/consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 2500 mm x 2530 mm x 2620 mm Operated with Aluminum AlSi10Mg! Laser hours: 2,200 h Condition: very good condition Scope of delivery: (see image) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to answer them by phone.

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Bsdpfx Absxy R Ezj Uoda

Condition: like new (used), functionality: fully functional, Year of construction: 2023, maximum speed: 40 km/h, first registration: 08/2023, overall weight: 17,500 kg, front tire size: 550/45-22.5 14PR 154A5, rear tire size: 550/45-22.5 14PR 154A5, total height: 3,300 mm, total length: 7,580 mm, total width: 2,550 mm, outer radius: 9,900 mm, number of axes: 2, Equipment: additional headlights, lighting, The timber forwarding trailer is in like-new condition, having been used for a maximum of 50 km. It is currently approved for 40 km/h. Loading volume: 16.30 solid cubic meters (RM). Transporting long timber up to 6.10 m is possible, with an extendable loading area length of up to 5.10 m. A certificate for road registration at 40 km/h with mudguards is available. Mudguards are included. Palms’ own hydraulic oil supply system. High-performance 130 cc piston pump permanently installed in the drawbar. Large oil tank with a 95-liter capacity. Large Hultins grapple Super Grip 420 S timber grab. Palms forestry crane FK 7.94 with a reach of 9.9 meters, still lifting 350 kg at maximum reach. The indicated sales price is net, plus 19% VAT. Sale is exclusively to commercial customers, with all warranty rights excluded. Bdsdpfxsx Hil Ns Ab Uea 2 Mini joysticks LC6 for all crane functions. 2 LED work lights.