Used Lathe Y Axis for sale (25,992)

Condition: good (used), Year of construction: 2018, functionality: fully functional, The equipment is as shown in the pictures. All tools visible in the pictures are included. Kodpfox Na Sljx Ad Sjdt

Condition: used, Year of construction: 2016, Used 2016 SPINNER U-1520 Machining Centre Supplied with Siemens SINUMERIK 840 control, 12,000 RPM spindle, 32-station tool changer, 80 bar high-pressure coolant, air through spindle, Renishaw probe, touch probe, and additional Ø650 mm rotary table. ----- SPECIFICATION: TRAVELS: - X Axis: 1,500 mm - Y Axis: 500 mm - Z Axis: 600 mm - 4 Continuous Axes + 1 Positioned Axis TABLE: - Rotary Table Diameter: 650 mm - Fixed table: 920x540mm SPINDLE: - Max Speed: 12,000 rpm Kdodjzx Ehnjpfx Ad Sjt - Taper: SK40 - Air Through Spindle TOOL CHANGER: - Capacity: 32 Tools COOLANT EQUIPMENT: - High Pressure Coolant: 80 bar GENERAL: - Control: Siemens SINUMERIK - Renishaw Probe - Touch Probe - Year of Construction: 2016 Control: Siemens 840D Spec: Travel X 1500 Y500 Z600 | Spindle Speed 12000RPM | SK40 Accessories: 5 axis Table, Fixed Table, 32 Tool Changer

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Speed : 17500 rpm Movement X/Y/Z : 600/650/500 mm Tool holder : HSK 63 In General: Year of manufacture:2020 Control system:Siemens 840 Dsl Travel range X/Y/Z:600/630/500 Rapid traverse X/Y/Z:120 m/min Spindle: Technologie:Motorspindeln Drehzahl:17.500 U/min Leistung:35 Nm Drehmoment:80 Nm Werkzeugaufnahme:HSK-63 Swivel mount: Technology:A-axis or U-axis with counter bearing Drive:Direct drive (torque motors) Clamping bridge: Technology:Clamping bridge with 1x NC rotary table each Drive:Direct drive (torque motors) Table diameter:Ø 340 mm Max. table load:150 kg Max. fixture dimensions:Ø 675 x 450 mm Tool magazin: Technology:Chain magazine Tool changer:Pick-up Number of stations:105 Max. tool diameter:80 (160) mm Max. tool length:450 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Kdodez A N Ahjpfx Ad Set Drive systems:Direct on all axes (linear motors) Hydraulic clamping:2x 3-circuit Chip removal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Separate cooling unit Support control:Pneumatic Tool breakage detection:Inductive Automation preparation:Profinet interface, automatic doors, automatic rinsing cycle :

Condition: used, Year of construction: 2016, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2016 Control : Heidenhain TNC 640 Speed : 12000 rpm Movement X/Y/Z : 400/350/350 mm Spindle: Technology:Directdrive Speed:12.000 rpm Power (max.):13 kW Torque (max.):95 Nm Taper:SK40 NC-Swivelroundtable: B-Axis:-50°/+110° C-Axis:360° Clampingsurface:ø450 mm Tableloading (max.):200 kg In general: Toolmagazine:48 Stations Kdodez A N Abspfx Ad Sst Rapid travers in X/Y/Z:48 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with filter and High-pressure, 30 bar Workpiecemeasurement:Touch probe, Heidenhain TS740 Toolmeasurement:Laser, Renishaw NC4 TX Setup operations:Electronic Handwheel Further Equipment:Spindlechiller Further Accessory:Misc. used Toolholder

Condition: used, Year of construction: 2018, controller manufacturer: Siemens, controller model: 840 Dsl - Celos, _____ Description: Year of manuf. : 2018 Control : Siemens 840 Dsl - Celos Speed : 20000 rpm Movement X/Y/Z : 850/520/475 mm Tool holder : HSK 63 In General: Year of manufacture:2018 Control system:Siemens 840 Dsl – Operate Travel ranges X/Y/Z:850/520/475 mm Speed:20,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:20,000 rpm Max. power:35 kW Kjdpfxjz A Nz Ro Ad Ssdt Max. torque:130 Nm Tool holder:HSK 63 Fluid supply:Coolant + blast air Working table: Clamping area:1,160 x 570 mm Max. table load:1,000 kg Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Max. tool diameter:80 (130) mm Max. tool length:300 mm Equipment: Positioning sensors:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system, 20 bar Workpiece measurement:Renishaw Touch probe Tool measurement:Tool setter Emulsion mist separator:Mechanical Tool coding:Balluf sensor

Condition: used, Year of construction: 2016, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2016 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):35 kW Torque (max.):120 Nm Barcapacity:65 mm Workpiececlamping:Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motor spindle, integrated in tool carrier II Speed:7.000 rpm :Power (max.):12 kW Torque (max.):22,5 Nm Chuck:Hainbuch Spanntop Kombi Axfix Gr. 42 Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Toolcarrier II (X/Y/Z): Technology:Turret with 9 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Backworking attachment: Technology:Backworking attachment with 8 stations (2x synchron, 6x asynchron) Kjdpfxoz A Nz Do Ad Sjdt Driven Tools:5 stations Tooldrive:12.000 U/min, 6,7 kW, 5,3 Nm Equipment/Accessory: Positionsensor:Direct Scales in X (up/down) Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbaletfilter and High-pressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Wasteheatmanagement:Interface for external chiller prepared Rawmaterialfeed:Barloader, FMB SL 80 V Finished part removal:Unloading device (NC-controlled) with coneyor belt Fireextinguishing unit:Kraft + Bauer Oilmistseparation:Electrostatic extraction LTA AC 3001 Further Accessory:Misc. used static and driven Toolholder

Condition: excellent (used), Year of construction: 1999, operating hours: 686 h, GILDEMEISTER lathe NEF plus 500 with Heidenhain Manual Plus control. In like-new condition. Kdedpjz Afc Tefx Ad Sjt

Condition: used, machine/vehicle number: 008694, X axis working area: 4320 mm Y axis working area: 1287 mm Working Table: Pod and Rail Ksdpfxozqz Nxj Ad Sedt Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 31

Condition: used, Year of construction: 2003, turning diameter 175 mm control Fanuc spindle tunring speed 6.000 U/min Kodszz S Rzjpfx Ad Sodt number of tool places 12 Pos. x-travel 125 mm z-travel 120 mm Used, sold without warranty Approximate transport dimensions (LxWxH): 1900x3100x2500 mm Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications; subject to prior sale!

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Max. turning length / headstock travel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 - Delivery rate (l/min) 40 EQUIPMENT FEATURES Kdedpfx Aszr Uvhsd Sot - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system - Fire extinguishing system Subject to change and errors in technical data and specifications.

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 7,000 kg, Fanuc 21-T cnc control 3-jaw chuck 12-fold revolver (VDI40) C-axis driven tools Kdodpfx Adsz Ainyo Set tail stock coolant device chip conveyor Technische Daten: / technical details Umlaufdurchmesser über Bett / rotary diameter over bed 420 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 280 mm Drehlänge / turning length 600 mm max. Drehzahl Spindel / max. spindle speed 44-4000 UpM /rpm Eilgang X/Z / rapid feed X/Z 24/30 m/min Anzahl der Revolverplätze / number of tool places 12 Antriebsleistung Spindel / drive capacity spindle 18,5/22 kW Gewicht ca. / weight ca. 7000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Center distance (mm) 450 Turning diameter (mm) 500 Turning length (mm) 300 Turning diameter (mm) 200 Bar passage (mm) 52 Spindle speed (rpm) 6000 Spindle power (kW) 15-20 Travel in X-axis (mm) 190 Travel in Z-axis (mm) 335 Rapid traverse rate (m/min) 30 Tool positions 12 Tool holder VDI30 Kdedpfjz At Abox Ad Sst Number of turrets 1 Number of driven tools 12 Weight (kg) 3800 Dimensions (L×W×H) (mm) 4260 x 1710 x 1820 Spindle hours (h) 20000 Manufacturer DMG Year of manufacture 2012 Control system Siemens 840D sl with ShopTurn

Condition: good (used), Year of construction: 1987, Machine is in good working condition. Kdedpfx Adjz Arxze Sjt Parts shown by hand not come.

Condition: new, Fanuc A20B-3300-0120 / 02A - A20B-3300-0120 / 02A PCB Axis Control Card, serial number as shown in the photo, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Kedpei D U Hhofx Ad Ssdt

Condition: new, Axesta 50 70 086 Axis Control, Serial No.: 9705180034, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Kedpfxsi D T Aqe Ad Sodt

Condition: new, Axesta Grossenbacher Axis Control IEEE 488 / 50 70 086, serial number: 9705180044, unused, 100% functional, scope of delivery as shown in the photos. Kdedpfx Adji D T A Ae Sjt

Condition: used, total length: 2,650 mm, total width: 1,150 mm, total height: 1,650 mm, Colour: Green Empty weight: 2.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 225 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 1600 - Distance between centres [mm]: 1050 - Bed width [mm]: 340 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 46 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Four-jaw chuck, Three-jaw chuck, Quick-change tool post, Fixed steady, Removable bed - Type of digital readout: Heidenhain - Transport dimensions: 2650mm x 1150mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kdjdezzlg Aepfx Ad Sst Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), CATALOG NUMBER 7753 TECHNICAL DATA - max diameter of processed dowels: 130mm - installed sleeve: 110mm - max diameter of input material: 160mm - min length of input material: 800mm - max machining allowance per side: 15mm - knife head drive motor: 15kW - 3 feed speed options + forward/reverse - feed motor: 1.1kW Configuration: - 3 toothed infeed rollers - 3-knife head - 3 smooth outfeed rollers - dimensions (L/W/H): 3100x1400x1500mm - weight: 2100kg ADVANTAGES – Made in Poland – 3-knife head – Used dowel lathe, in very good condition Net price: 32,900 PLN Net price: 7,830 EUR (conversion at 4.2 PLN/EUR) Kjdpfx Adozulqns Sodt (Prices may vary with greater exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2023, Capacity: Distance between spindle center and guides mm 220 Swinging diameter over bed mm 440 Swinging diameter over cross slide mm 230 Max. turning diameter over bed mm 400 Max. turning length between centers mm 1,000 / 1,500 Bed width mm 330 Headstock: Distance spindle center - bed mm 220 Spindle nose according to standard DIN 55027 Type C6 Spindle bore according to DIN 55027 mm 66 Max. spindle speed rpm 3,500 3-jaw chuck diameter mm 250 3-jaw chuck bore mm 76 Spindle motor power S1 100% / S6 40% / S6 25% kW 10 / 14 / 17 Spindle torque S1 100% / S6 40% / S6 25% Nm 159 / 224 / 272 Tailstock: Travel of quill mm 120 Quill diameter mm 65 Internal taper MT 4 Control: HEIDENHAIN TNC 620 MANUAL PLUS Accuracy: Positioning accuracy mm +/- 0.010 on 1,000 Repeatability mm Kdodpfx Aez Ai N Djd Sst 0.010 on 1,000 General information: Dimensions (without control panel): L x W x H mm 2,500 x 1,600 x 1,800 Weight kg 2,500 Max. installed power kVa 16

Condition: used, Year of construction: 1999, turning diameter over bed 280 mm turning diameter over slide rest 150 mm turning length 500 mm center height over bed 140 mm centre distance 500 mm bed width 205 mm spindle bore 40 mm turning speed range - stepless 30 - 4.000 U/min 3-jaw-chuck diameter 140 mm quick change toolholder MULTIFIX Typ A drive capacity - spindle motor 4,0 kW taper in tailstock-quill MK 3 dia. of quill 40 mm quill stroke 85 mm voltage 400 V total power requirement 7,5 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,40 x 0,95 x 1,55 m - Serial-No.: 154 - SIEMENS 3-axis digital display - MULTIFIX quick-change tool holder - rotating centering tip Kdjdpfsz Abw Hex Ad Sst

Condition: used, Year of construction: 2008, turning diameter over bed 280 mm turning diameter over slide rest 170 mm turning length 650 mm center height over bed 140 mm centre distance 650 mm bed width 155 mm spindle taper KK 4 CAMLOCK DIN 55029 spindle bore 40 mm turning speed range - stepless 4.000 U/min 4-jaw-chuck diameter 140 mm quick change toolholder MULTIFIX Typ A drive capacity - spindle motor 7,5 kW taper in tailstock-quill MK 2 dia. of quill 30 mm quill stroke 80 mm voltage 400 V total power requirement 7,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder Kdjdpfxez Abwyo Ad Sjt

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table Kdedszr Uudjpfx Ad Sst - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: repair required (used), Year of construction: 2009, 5-axis CNC machining center – universal – Manufacturer: RÖDERS Machine model: RXP 800 DS Year of manufacture: 2009 TECHNICAL DATA Travels Kdedpezt Rd Defx Ad Sot - X-axis (mm): 475 - Y-axis (mm): 600 - Z-axis (mm): 400 - A-axis (swivel table): +/- 95 - C-axis (rotary table): 360 EQUIPMENT FEATURES + RC 4 automation + Chip conveyor

Condition: good (used), Year of construction: 2010, functionality: fully functional, Technical details turning diameter 475 mm turning length 830 mm control HEIDENHAIN MANUALplus 620 swing diameter over slide rest 260 mm centre distance 1000 mm spindle bore 70 mm spindle turning speed range 1 - 3000 U/min feeds - cross 0,001 - 1000 mm/U feeds - longitudinal 0,001 - 2000 mm/U rapid travel - longitudinal/face 10 / 5 m/min tailstock quill diameter 70 mm tailstock quill stroke 120 mm tailstock quill taper MT 5 main drive (40 % ED) 25 kW weight of the machine ca. 2,9 t Additional information * Control HEIDENHAIN MANUALplus 620 * DXF conversion software (processing of contours in DXF format from CAD drawings) * Ethernet and USB interfaces inside the control cabinet * Coolant system (frequency-controlled), 1–4 bar * Glass scale for direct position measurement on the X and Z axes * 4-position PARAT quick-change tool holder, size 2, with several inserts * 3-jaw-chuck RÖHM ZS 200 * Roller guide for easier movement of the tailstock Kedpfx Ajzzwi Nsd Sedt * 2 movable safety doors * Main motor fan control, temperature-controlled, for particularly quiet environments such as laboratory workshops and schools

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Kodpfxszzwguo Ad Sodt Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.