Used Leake Detector for sale (927)

Condition: ready for operation (used), functionality: fully functional, power: 37 kW (50.31 HP), Year of construction: 2019, pressure (max.): 13 bar, usable tank capacity: 1,500 l, rotational speed (max.): 3,800 rpm, volume flow: 475.2 m³/h, machine/vehicle number: API866497, The compressor received a comprehensive service in December 2025, including an oil and filter change! TECHNICAL DETAILS Cut-in pressure: 8.5 bar Cut-out pressure: 10.0 bar Nledpfxjzf Afqs Akajc Operating temperature: 76 °C Volume flow: 131.9 l/s Volume of pressure vessel: 1,500 l Manufacturer of pressure vessel: OKS Otto Klein GmbH MACHINE DETAILS Engine power: 37 kW Engine speed: 3,800 rpm Operating hours (as of 12/2025): 31,006 h Machine weight: 860 kg The following work was carried out during the service in December 2025: Oil change Air filter cartridge replaced Oil filter replaced Oil separator cartridge replaced Emergency stop switch checked Safety valve checked Test run performed Oil level checked Oil leaks checked Air leaks checked Belt tension checked Drive coupling checked

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: S/N78757, total width: 1,850 mm, total length: 1,850 mm, total height: 1,650 mm, space requirement width: 10,000 mm, space requirement length: 52,000 mm, space requirement height: 3,000 mm, type of input current: AC, operating speed: 5,580 mm/s, input voltage: 440 V, The Sheet Wizard 1850 dual rotary sheeter is engineered to accommodate a variety of application requirements. This versatile and standardized sheeter features dual rotary knife technology, providing exceptional cut quality for materials up to 1000 gsm. The machine is capable of operating at a maximum speed of 335 meters per minute (1100 feet per minute). Unwind System Six shaftless floor pickup unwinds are designed to handle rolls with a diameter of up to 83 inches. The system supports core sizes ranging from 3 inches up to 12 inches, ensuring flexibility for different roll specifications. Nledey Dkikepfx Akaoc Decurling and Tension Control Each unwind is equipped with overhead decurlers and tension controls, maintaining optimal sheet flatness and consistent tension throughout the process. Alignment and Splice Management The machine incorporates FIFE alignment technology and a splice sensor detector, which automatically discards joined sections to ensure product integrity and continuous operation. Slitting Capabilities The Sheet Wizard includes a double set of four slitters, each capable of cutting up to 600 grams. This arrangement allows for efficient slitting and high throughput.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: S/N69515, Sheet Wizard 1650 (4 roll stand) The SheetWizard 1650 dual rotary sheeter is engineered to accommodate a variety of application requirements. This versatile and standardized sheeter features dual rotary knife technology, providing exceptional cut quality for materials up to 1000 gsm. The machine is capable of operating at a maximum speed of 335 meters per minute (1100 feet per minute). Unwind System Four shaftless floor pickup unwinds are designed to handle rolls with a diameter of up to 73 inches. The system supports core sizes ranging from 3 inches up to 12 inches, ensuring flexibility for different roll specifications. Decurling and Tension Control Each unwind is equipped with overhead decurler and tension controls, maintaining optimal sheet flatness and consistent tension throughout the process. Nledpfxsy Uffbj Akasc Alignment and Splice Management The machine incorporates FIFE alignment technology and a splice sensor detector, which automatically discards joined sections to ensure product integrity and continuous operation. Slitting Capabilities The SheetWizard includes a single set of three slitters, capable of cutting up to 600 grams. This arrangement allows for efficient slitting and high throughput.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate test chamber Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Time-related temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Nledpfx Ajzg Tx Rskasc Time-related temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-related humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2007, operating hours: 868 h, 2007 | Probst Unipose | Used Wheel Loader | 868 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Nljdpfx Akszg Nrysaoc 👷‍♂️ Inspected by an independent expert 50 inspection points 47 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine hour unknown and engine oil leak on the wheel loader, which was previously equipped with an edge clamp. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40885 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Nedpfxjy R Nnfs Akaslc Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: excellent (used), Weiss Type: WKL 34/60 Weiss Climate Chamber, Air-Cooled Refrigerant converted to R-452A -60°C to 150°C Volume: 34 liters Installed in basic configuration: Nlodozgr U Rspfx Akasc R1 NW 50 mm L1NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Performance data for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5 Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation spatially (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Cooling 3 K/min Heat compensation max. 550 W Performance data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 % RH Operating data: Test chamber lighting Halogen bulb 12V, 20W Rated voltage 1/N / PE AC 230 V ± 10 % 50 Hz Rated power 2.5 kW Rated current 11 A Fuse on customer side 16A slow-blow Heat dissipation of air-cooled test chambers Max. heat dissipation to the environment 1700 W Refrigerant: R-452A / R23 Weight: 140 kg For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2007, operating hours: 89 h, 2007 | Bomag BW 100 AD-4 | Used Tandem Roller | 89 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 43 inspection points 41 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good machine, some scratches and suspicion of a small hydraulic leak. Nledpszgw Dqofx Akajc 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40960 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2004, operating hours: 3,973 h, 2004 | Case 921 C/2 | Used Wheel Loader | 3973 hours Nodpfx Akozgr D Sjaelc 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 21600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 42 approved ✅ 15 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine that does not have too much play to note for 12000 hours some repairs anticipated: engine oil leak, leak on 1 bucket lifting cylinder and 2 hoses. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40668 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, maximum load weight: 12,000 kg, overall weight: 16,000 kg, first registration: 01/2009, loading space length: 8,690 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,590 mm, total height: 2,750 mm, Year of construction: 2009, Vehicle No. G0106558_1 - Manufacturer: Krone. * Floor: Aluminum floor * Simple corner fittings * Electrical cable for refrigeration unit * Rear door design: Rear portal doors * Refrigeration unit * Portal door with simple espagnolette locks (external) * Support legs fixed Njdpfxozgb Ums Akaolc * Locking bars on rear doors: 2 * Tie-down rails New leak test. Rear portal/portal door with simple espagnolette locks/external made of stainless steel. Storage container wind and weatherproof, lockable, floor in good condition, no further repairs. Delivery time: IMMEDIATELY. Technically ready for use without further repairs. Test run down to -18°C OK! Substructure with signs of wear. UVV applicable. Mobile refrigerated storage unit. Dimensions are approximate. Offer subject to change without notice and prior sale. Prices net ex location, D-59302 Oelde. Further details are available by phone or email:

Condition: excellent (used), Leybold Two-Stage Rotary Vane Vacuum Pump Here, we offer a Leybold two-stage rotary vane vacuum pump. The TRIVAC B series are oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pumping chamber serves for sealing, lubrication, and cooling. The pump housing is composed of individual parts without sealing elements. These are pinned together to ensure easy disassembly and reassembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed down to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, forced-lubricated plain bearings Minimal air intake High leak tightness (4He-capable) Technical data: Product: TRIVAC D 40 B Suction side connection flange: DN 40 ISO-KF Discharge side connection flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10⁻⁴ mbar Ultimate total pressure without gas ballast: < 2.0 x 10⁻³ mbar Ultimate total pressure with gas ballast: < 5.0 x 10⁻³ mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid volume min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 db(A) with gas ballast: 59 db(A) Power connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection type: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Type: Trivac D 40 B Condition: used Nodpfx Aezgbvqskaelc Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Weiss Type: WK1-1000/70 Weiss Climate Testing Chamber, Water-Cooled (Refrigerant converted to R-452A) Control panel: "Touchpanel" All control and operating commands can be initiated on the "Touchpanel" by simply touching the function symbols. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be placed in the test chamber. Feedthroughs: 1 feedthrough, diameter 125 mm, installed on the right 1 feedthrough, diameter 50 mm, installed on the left Volume: 990 liters Test chamber dimensions: Test chamber: width 1100 mm, depth 950 mm, height 950 mm Housing: width 1385 mm, depth 1850 mm, height 1980 mm Data for temperature tests: Minimum temperature: -70 °C Maximum temperature: +180 °C Temperature deviation, over time: ± 0.1 to ± 0.5 K Temperature homogeneity, spatially: ± 0.5 to ± 2 K Temperature change rate, heating: 4 K/min Temperature change rate, cooling: 2.5 K/min Maximum heat compensation: 2750 W Data for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatially: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Data for operation: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 29A, rated power: 19.8 kW Nodpfx Aezgbtpekajlc Refrigerant: R-452A / R23 Weight: approx. 910 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer a Weiss climate testing chamber. Weiss climate testing chamber, water-cooled (Refrigerant converted to R-452A) Temperature testing Volume 335 liters Test chamber dimensions: Nljdszgavvspfx Akaec Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature -42°C Maximum temperature +180°C Temperature change rate, cooling 4 K/min Temperature change rate, heating 3.2 K/min Temperature deviation, time-based ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K Climate testing: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH Temperature deviation, time-based ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, time-based ± 1 to ± 3 % RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4.1 kW Rated current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight Approx. 515 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), We are offering a Weiss climate testing chamber. Water-cooled. Test chamber lighting: halogen bulb 24V, 50W. Data for temperature tests: Temperature range: -40°C to +180°C. Temperature deviation over time in the center of the usable space: ± 0.3 to ± 0.8 K. Temperature deviation spatially: ± 0.5 to ± 2 K. Temperature change rate: Heating: 10 K/min. Cooling: 12.5 K/min. Heat compensation at +20°C: 8000 W. Heat compensation at -20°C: 3000 W. Data for climate tests: Temperature range: +10°C to +95°C. Humidity range: 10 to 98 % RH. Temperature deviation over time in the center of the usable space: ± 0.2 to ± 0.5 K. Nledpfszgaipex Akajc Temperature deviation spatially: ± 0.5 to ± 1 K. Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH. Test chamber dimensions: height 950 mm, width 760 mm, depth 650 mm. External dimensions: height 2025 mm, width 1090 mm, depth 2480 mm. Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz. Rated current: 24 A. Rated power: 16.0 kW. Refrigerant: R452A. Weight: approx. 900 kg. Type: WK-480/40/10. For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components. 2. If necessary, new filling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers undergo a documented test run. Condition: used. Scope of delivery: (See image). (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer you a walk-in climate chamber. Manufacturer: RS-Simulatoren, water-cooled The chamber can be disassembled into three parts for transportation (bolted construction). Temperature range: -30°C to +100°C Refrigerants: 20kg R-404A + 20kg R-452A External dimensions (approx.): Width 3,920 mm, Depth 7,350 mm, Height 2,600 mm Test chamber/internal dimensions (approx.): Width 3,500 mm, Depth 5,400 mm, Height 2,110 mm Electrical data: 68kW rated power Voltage: 3x400V/PE, Current: 135A Nlsdpfozgabljx Akaoc Model: KKM 40 / 45 S Further technical details will follow! For your peace of mind as a buyer, please note the following: We carry out the following procedures on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run Condition: used Scope of delivery: see picture (Subject to changes and errors in the technical data and specifications!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2011, Ref: 11100 . 2011 Duplo DPB-500 EVA Perfect Binder Excellent condition! Only 40,000 books on the counter! Single clamp solo binder designed for the digital book-on-demand market with operation by one person. Features: • EVA spine glue unit • Programmable pre-melter • Computerised set-up with icon based touch-screen • Automatic setting of clamp book thickness and cover scoring • Double/Out of cover detector • Light beam score positioning • Milling & roughing unit with dust bag extraction • Internal vertical stacking tray delivery Specification: Book thickness: Min 1mm / Max 51mm + cover thickness Nledpfsy Nzclex Akaec Book size (spine × fore-edge): Max 360mm × 320mm Min 120 × 120mm Cover size: Max 360 × 696mm / Min 120 × 250mm Cover weight: 80-302gsm Cover Pile height: 70mm Mechanical speed: Max: 525 /hour

Condition: excellent (used), Weiss Temperature Chamber Here we offer a Weiss temperature chamber. Nljdpfezfzamsx Akaec Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume approx. 990 liters Data for temperature tests: Temperature range -40°C to +180°C Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min Heat compensation max. 4500 W Feedthrough, installed as standard R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm Maximum load (evenly distributed over the area) of the test chamber floor 150 kg Per insert shelf 50 kg Total load of the shelf supports 100 kg Data for operation: Test chamber lighting: Halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11.5 kW Rated current 22 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 840 kg Type: WT11-1000/40 For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss Temperature Chamber We offer a Weiss temperature chamber here. Weiss temperature chamber, air-cooled with Weiss condenser cooler Test chamber volume approx. 990 liters Nledpfx Akszfy Rwsajc Data for temperature tests: Temperature range -70°C to +180°C Temporal temperature deviation in the center of the useful space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min Heat compensation max. 2750 W Feedthrough integrated in the standard configuration R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert shelf 50 kg Total load of the shelf supports 100 kg Data for operation: Test chamber lighting Halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation of water-cooled test cabinets max. heat dissipation to the environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 960 kg Type: WT11-1000/70/5 For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the telephone.

Condition: excellent (used), Heraeus Vötsch Climate Chamber Here, we offer a Heraeus Vötsch climate chamber. Vötsch Climate Chamber VCS 7033, Water-Cooled Temperature range: -70°C to +180°C Temperature change rate: Heating: 7.5 K/min Cooling: 6.5 K/min Humidity range: 10% to 98% RH Temperature deviation (temporal): ± 0.5 K Temperature deviation (spatial): ± 1.5 K Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x Depth 1565 mm x Height 1840 mm Side feed-through: 90 mm diameter Approx. 330 L, Weight: 600 kg Nledpfx Aszfy Rqekasc Voltage: 3/N/PE AC 400V ±6/-10% 50Hz Rated power: 9.5 kW Rated current: 17 A Refrigerant: R404A / R23 Type: VCS 7033 For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with refrigerants that comply with legal requirements 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm Nsdpfxszc Agkj Akaolc - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: excellent (used), Vötsch Type: VTS³ 7018-5 Water-cooled Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 900 mm x Depth 1550 mm x Height 1850 mm Temperature testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Temperature change rate: Cooling 7.5 K/min Test chamber volume: 190 liters Rated voltage: 400 V Rated current: 20 A Rated power: 9 kW Weight: approx. 540 kg Refrigerant: R404A and R23 Nedjzfg Ucopfx Akajlc For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a TIRA temperature testing chamber. TIRA temperature testing chamber, air-cooled. The chamber has the option for an external test box, including an external sensor connection, and can therefore also be used as an external temperature control unit. Nedpfxszd Umqj Akaelc Temperature range: -20°C to +140°C Temperature stability over time: ±0.1°C to ±0.3°C External dimensions: Width 860 mm x Depth 1500 mm x Height 2100 mm Test chamber dimensions: Width 601 mm x Depth 545 mm x Height 692 mm Electrical connection: 400V +6% / -10% 50Hz 3P+N+PE Rated current: 10.0 (max. 17) A Rated power: 5.2 (max. 9.0) kW Net weight: 735 kg Refrigerant: R404A / R23 Type: TTRE 2001S For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry Nledszd Ufaspfx Akaec • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Condition: excellent (used), Heraeus Vötsch Temperature Test Chamber Here we offer a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber VTS 7033, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.5 K Spatial temperature deviation: ± 1.5 K Heating rate: 7.5 K/min Cooling rate: 6.5 K/min Test chamber dimensions: Width 825 mm x Depth 800 mm x Height 870 mm Housing dimensions: 1080 mm x 1710 mm x 1950 mm Side openings: 12 cm and 13 cm Voltage: 400V +6/-10%, 3/N, 50Hz Rated power: 9.5 kW, Rated current: 22 A Refrigerant: R404A / R23 Approx. 570 liters, Weight: 580 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Type: VTS 7033 Condition: used Nodjzd Sf Dspfx Akaslc Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer a shock test chamber. Water-cooled temperature shock test chamber Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -65°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power: 10 kW Rated current: 25 A Nlsdpfx Akezd R Uwsaec Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Type: HT 7012 S2 Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.