Lely centerliner buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6

Machine Lely Splendimo 280FC

Amsterdam Netherlands
6212 km
1999
USED
1.900 €
Offer
Another 2 days
Lely Splendimo 280FC machine Birwj9ws more
1

Die Cutter WPM 400 B

Kaarst Germany
6374 km
2000
USED
- max. sheet format 820 x 1,130 mm - max. mech. strokes per hour 9,000 - max. cutting pressure 4,0 MN (400 t) - machine with high-performance sheet feeder for manual Non-Stop operation - for fully automatic cutting, creasing and embossing, with or without gripper edge - including stripping of the internal waste and the side and rear sheet edges - including piling of the processed sheets with gripper edges still attached, or alternatively - stripping the gripper edges and piling the remaining she... more
5
This used WPM die cutter 300 C is completely overhauled . F3ag7c9hc Non-Stop feeder, Centerline System, Stripping Unit, gripper edge removal and blank separation, operator platform, Size max: 720 x 1.030 mm, Size min: 350 x 400 mm, Mechanical speed max: 9.000 s/h, Cutting force max: 300 T, Paper: min 70 g/m², Corrugated board: up to 4 mm more
Centerline System for quick Job Changeover Electronic Double Sheet Control Universal transport Equipment for paper and corrugated board up to 4 mm Automatic Pallet changing device Stripping Station Blanking Station Non-Stop delivery Adjustment of the lateral stacking position Micrometric System Elevation 410 mm M3amb more
6
• Centerline II M2zsr • Max 1200 x 1620 mm • Vacuumfeeder • Quick change Chase • Pneumatic clamp • Photo Eyes • Die Cutter, Stripping Unit, Batch Delivery • Available immediately more
2
Bench scale Soehnle S20 2763 Size scale: 520 x 400 x 90 mm Scale range: from 20 g up to 60 kg Weighing accuracy: 20 g Type of protection: IP 65 dust and water jets protected Mains with 230 V, 50-60 Hz, approx. 12 VA 8280zwtvz All data is stored non-volatilely Serial interface RS 232 (24 V) Currently still in use. Pick up or shipping from 01.09.2017 possible. more
6
Bobst Flexo 160 Jahr 2000 2qtjwa CE N. 3 bottom pribting units (120 lines/cm) Vacuum transfer Transfer Bobst SPO 160 S die cutter Jahr 1998 CE Die cutting + Stripping section Centerline II Chase loader Batch delivery Bobst Easybreak Available end 2017. more
1
Automatci diecutter SBL 1050 SE ref 1636 year 2000 max size 740x1050 mm max pressure - 300T Centerline 1 x 5mm cuttin plate 1 x 4mm cutting plate, 1mm plate system 2 x chasse 1 x honeycomb chasse 2 x stripping chasse Djjzfpj machine is complete, available now! condition very good! more
6
Automatic non-stop feeder, Pull site lay mark left, Elevation: 410 mm, Electric double sheet control, Bobst Cube-Control, Micrometer adjustment, Upper stripping frame: 1x, Lower stripping frame: 1x, Cutting frame: 2x upper, Upper blanking frame: 1x, Lower blanking frame: 1x, Centerline System, Quick Lock, Blanking Unit, Stripping Unit, Cutting plate: 1x 4 mm, Non-stop delivery, Size max: 1.040 x 740 mm, Size min: 400 x 350 mm, Mechanical speed max: 8.000 sheets/h, Cutting force max: 250 to, Pa... more
4
Max weight capacity: 100 Kg Max working radius: 4000 mm Max vertical lifting speed: 0,5 meters/second Cfqrr2gi Vertical lift: 1400 mm Control system: solely pneumatic Consumption: 20 Nl ÷ 100 Nl per working cycle Rotations: – constant 360° rotation on the column and tooling axis more


lely cente...
every day

New machines via email!

Be informed!
5
BOBST 102 Ladies and Gentlemen We are pleased to offer as owner: BOBST Autoplatine SP 102-CER Yrkexk Age: 1983 Available: Immediately Condition: Good, Damage free Still in production: Yes Test possible: Yes Complete and in working condition: Yes Technical details: max. sheet size: 720x1020 mm min. sheet size: 350x400 mm max. embossing size: 250 tons Max. production speed 7,500 sph Centerline Double action stripping LH and RH pull guides Cutting chases Cutting plates Continuou... more
4
Swing over bed 330 mm Swing over cross slide 170 mm Turning diameter of Max 330 mm Spindle bore 38 mm Spindle retainer after DIN55022 size 5 Power of main spindle 3, 8kW Speed range 1/min 12-2,800 Ibtasoq Chuck Multiswisse B Number of tool stations, 1 piece Tailstock with cone MK4 Travel of tailstock Quill 110 mm Dimensions (Lxwxh) 1,800 x 1,000 x 1,800 mm Machine weight 800 kg Accessory included in the scope of supply: 3-jaw manual Chuck 160 mm Tension clamp Assembly ... more
4

Die Cutting Machine Bobst SP 104 ER

Topkapi - Istanbul Turkey
8420 km
2002
USED
Centerline System for quick Job Changeover, Electronic Double Sheet Control, Universal transport Equipment for paper and corrugated board up to 4 mm, Automatic Pallet changing device, Bht3tzso Stripping Station, Blanking Station, Non-Stop delivery, Adjustment of the lateral stacking position, Micrometric System, Elevation 410 mm Working Hours: 39.000 more
1
Automatic diecutter HEIDELBERG VARIMATRIX 105 CS, age 2007 with about 16,000 working hours and following equipment: Max sheet size 1050 x 750 mm, min. sheet size 370 x 400 mm, Cutting force 300 tonnes, Speed of 7500 S / h, Material classification: paper, solid Board 80-2000 g / m2 corrugated E + B-flute. Stripping device 2 chases 1 Cutting plate Ey9tejr 1 Sidelay for OS and DS - platform, Elevation 300 mm,. Centerline, Non-stop delivery, New compressor from 2016, more
6
Mvh0l Smart Feeder, Manual non-stop feeder, Easytransfer, Photocells for automatic cycle, Power Register II, Cam driven platen, Autoplatine, CUBE3-System, Additional CUBE Monitor, Centerline System, Chase Changer, Blanking Unit, Stripping Unit, Automatic device for opening the gripper in stripping unit, Bernoulli System at Stripping Station, Bernoulli System at delivery station, Anti-static device, Device for high-speed diecutting of Paper, Highway Vista, Highway Memory, Non-stop delivery, Si... more
4
Max weight capacity: 100 Kg Max working radius: 4000 mm Max vertical lifting speed: 0,5 meters/second Vertical lift: 1400 mm Control system: solely pneumatic Consumption: 20 Nl ÷ 100 Nl per working cycle Rotations: Ekc0gsh – constant 360° rotation on the column and tooling axis more
1

Die Cutting Machine Bobst SP 102-CER

Pfarrkirchen Germany
6915 km
1983
USED
Max. size: 720x1020 mm Min. size: 350x400 mm Cutting power: 250 tons Max. Speed 7,500 Sph Centerline Double action stripping LH and RH pull guides Cutting chases 9danqxecx Cutting plates Continuous feed and delivery Stripping station Blanking station All documentation included Micrometric system Automatic pallet changing device Elevated 410 mm more
- max. sheet size 600 x 820 - max. speed 6.500 sheets/h - max. punching power 2.5 MN (250 t) - for fully automatic punching, grooving and embossing - for stapling the punched sheets - feeder stack heigh 1.200 mm - delivery stack height 1,000 mm F9xliht - centerline equipment more
5
Year 2006 Max.Size: 740 x 1060 mm Min.Size: 350 x 400 mm Max.Speed: 7500 sh/h Max.Cutting force: 250 t. Centerline 13,000 hours only Yrf3ak more
6
Serious high-performance planing REX HOMS-310-K-4 shafts, built in 2000 Type: A + D = FK Ø200 Type: EZG + REU + A + D + FR + FL + AZG Masch.Nr. 22.407 Built in 2000 • Replaced 2010 all cardan shafts • the gearbox with chain guide was overhauled in 2010 • Air suspension has been overhauled in 2010 8ielcm7ez • from 2011 the Rex was no longer in production • complete documentation including the switching schema electronic documentation is available in German MATERIAL The planing mac... more
6
79cqs7uyj Non-Stop feeder, Pull site lay mark left, Elevation: 410 mm, Electric double sheet control, Fully automatic pallet changing system, Bobst Cube-Control, Micrometer adjustment, Upper stripping frame: 1x, Lower stripping frame: 1x, Cutting frame: 1x 4mm, Upper blanking frame: 1x, Lower blanking frame: 1x, Centerline System, stripping station, Blanker, Upper cutting frame: 2x with Quick Lock, Non-stop delivery, Size max: 1.040 x 740 mm, Size min: 400 x 350 mm, Mechanical speed max: 8.00... more
4
9rfhwyiweMax weight capacity: 100 Kg Max working radius: 4000 mm Max vertical lifting speed: 0,5 meters/second Vertical lift: 1400 mm Control system: solely pneumatic Consumption: 20 Nl ÷ 100 Nl per working cycle Rotations: – constant 360° rotation on the column and tooling axis more
6
Horizontal film wrapping / banding shrink film packaging machine Type: AVN 851 Highly suitable for packing of solid goods such as snakes cucumber banana cabbage or similar chunky products Technical Description AVN 851 is intended solely for the packaging of suitable products with PP or PE film. Packaging material: flat film made ​​of PE or PP. Width: max. 480 mm Thickness: 15-50 Âμm Number of rolls: upper and lower film Film roll diameter: max. 250 mm Dimensions and weights   Length: ca.440... more
6
Collar shelving -already demontiert- 34 stand with 3 arms of the collar and the corresponding shelves, h = mm 440 cm, field mass 1800, 8 stand with 2 cantilevers and its shelves, h = mm 260 cm, field mass 1800 Built in 2000. 300 kg per boom load, 900 kg per pole The shelf is in very good condition, as it a dry air-conditioned great room Office built was. Price: 2900,00. EURO Location: At Fürth / Nürnberg The buyer brokerage fee in the amount of 15% on the purchase price is deserv... more
4

Diecutting BOBST SP 102 E-II

Alsfeld Germany
6563 km
2001
USED
Year 2001 7jcwcii Max.Size: 720 x 1020 mm Min.Size: 350 x 400 mm Max.Speed: 7500 sh/h Max.Cutting force: 250 t. Centerline 32,000 hours only more
1
Specifications Table Drive: Hydraulic grinding area: 1200 x 400 x 700 mm (L x B x H = table to spindle centerline) grinding wheel: 400 x 80 x 127 mm (D x W xd) Spindle taper: 60 mm Finish: RAL 7035 machine accessories new ELB easyTouch PLC Maschinensteürung spindle drive 10 KW, adjustable speed Automatic vertical feed linear guides in the machine axes X YZ cooling unit for X-axis with soundproofing car. Central lubrication, Fliessfett full room housing electro-permanent magnetic plate 1200 x 40... more
1

Die cutter WPM 300 C

Maulbronn Germany
6617 km
2000
USED
Embossing and die cutting machine, max. size 103 x 72 cm, min. 40 x 35 cm, stripping station, blanker, centerline, non-stop-feeder, max. speed 9000 sheets/hour, max. pressure 300 tons, workable material: paper min. 70 g/m², carton up to 2000 g/m², corrugated board up to 4 mm, cleaned, checked. Ldgn9 more
4

CNC vertical machining center Kitamura My 3 XiF SP

Hornberg-Niederwasser Germany
6619 km
2006
USED
Table pallets dimensions 410 x 864 mm T-slots (width in mm x quantity) 18 x 3 table load max. 200 kg pallet 2 pallet changing 5 sec. Travel X-axis 760 mm Y-axis 455 mm Z-axis 460 mm Distance table surface spindle nose 130 590 mm distance stand-table centerline 216 670 mm spindle spindle taper NST 40 Spindle speed (automatic 4-speed gearbox) 20,000 U / min. Feed Cutting feed 36,000 mm / min. Rapid traverse (X / Y / Z) of 50/50/36 m / min. smallest input unit 0.001 mm tool changer tool holder BT 4... more
1
ABB DARJI 110 (used) Dphkdt7 Digital input-output Board More details and pics on request. Unit comes from the industry, has been tested and is fully functional. The goods is sold solely as used goods and spare parts donors, under exclusion of any warranty or guarantee. more
6
High steel Hall -disassemble -. Size Length 30, 00 m Width: 25, 00 m Height: approx. 16, 50m (!) The roof and wall tiles consist of high-quality insulating material, so that the Hall in the summer-how keeps the temperature in the winter. Ibn of Hall were originally 40 high stainless steel tanks for the food production. These are however already built and not part of this sale. The frame of the tanks is part of the static! B32mbvhw To reach the top of the tank is a a passenger lift... more
4

Diecutting BOBST SP 102 E-II

Alsfeld Germany
6563 km
1998
USED
Year 1998 Max.Size: 720 x 1020 mm Min.Size: 350 x 400 mm Max.Speed: 7500 sh/h Guatecan Max.Cutting force: 250 t. Centerline 40,000 hours only more
5

Die Cutter Wupa Magnatop PS 3.4 A

Weil der Stadt Germany
6636 km
1996
USED
max. size 74 x 105 cm age 1996 max. 9.000 cycles / hour 3n0k00c2q Mabeg feeder Nonstop device in feeder and delivery 1 sidelay - convertable for pull or push function CENTERLINE 2 closing frames 2 punching plates stripping device machine raised 30 cm tab inserting adjusting table for stripping frame shown totalizer: approx. 82 mill. impressions more
2
Magnetaufspannplatte 450 x 150 mm; control panel, electric hand wheel, straight-dressing, coolant system, max grinding area. 450 x 200 mm; largest distance table - grinding spindle centerline 400 mm; TISCHLAeNGSBEWEGUNG (X-axis) Longitudinal movement of table 540 mm, table longitudinal movement hydraulically max. m / min 2-33 TISCHQUERV eed (Z-axis) transversely-up electro-mechanical. 210 mm SENKRECHTB EWEGUNG (Y-axis) electron. Handwheel one turn WHEEL 0.2 mm (C-axis) Grinding wheel dimensions... more
1
ABB 3HAA 0001-ADY (gebraucht) Break release unit More details and pics on request. Unit comes from the industry, has been tested and is fully functional. The goods is sold solely as used goods and spare parts donors, under exclusion of any warranty or guarantee. B8dbdpq9m more
1
Fig. 3E 042 688 (gebraucht) Robtalk component APRBP-04 More details and pics on request. Unit comes from the industry, has been tested and is fully functional. The goods is sold solely as used goods and spare parts donors, under exclusion of any warranty or guarantee. Luxcj more
2
KUKA KSD1-16 - servo module (Art.Nr. 00-105-350) Vsvsj2sys More details, part numbers and pictures upon request. Unit comes from the industry, has been tested and is fully functional. The goods is sold solely as used goods and spare parts donors, under exclusion of any warranty or guarantee. more
1
ABB DARJI B001 (gebraucht) Digital input-output Board More details and pics on request. Uefv0cxeb Unit comes from the industry, has been tested and is fully functional. The goods is sold solely as used goods and spare parts donors, under exclusion of any warranty or guarantee. more
1
ABB DSQC 245 (gebraucht) Serial measurement Board More details and pics on request. Unit comes from the industry, has been tested and is fully functional. Srm3zg The goods is sold solely as used goods and spare parts donors, under exclusion of any warranty or guarantee more
1
Ihwtah82ABB DSQC 326 (used) Robot CPU More details, part numbers and pictures upon request. Broken plastic cover! Unit comes from the industry, has been tested and is fully functional. The goods is sold solely as used goods and spare parts donors, under exclusion of any warranty or guarantee. more
1
Elect./Voltage: Wygzbsttf 1976 LODGE & SHIPLEY PROFITURN 40 Flat Bed CNC LatheSpecifications: -- Swing Over Bed Ways 33"" -- Swing Over Cross Slide 21-1/2"" -- Distance Between Centers 168"" -- Cross Slide Travel 24-15/16"" -- Spindle Horsepower 50 HP -- Speeds 6-1100 RPM -- Spindle Nose 15"" A-1 -- Hole Through Spindle 7"" -- Spindle Collect #6 -- Bed Width/Depth/ 25-1/4"" -- Distance From Front Way To Centerline Of Work 14-7/8"" -- Traverse Rate 300 IPM -- Tailstock Spindle Qui... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 7pg2laey2 TYLE 2400 SLAT-WALL MACHINE: -- Specifications:Produces T-slots ""Slat-Wall"" for architectural/store fixture panels.48"" x 97"" Max. panel capacity., 24"" x 24"" min. cap., panel thickness 0.5"" to 1.5""; Machine capable of processing up to (40) panels/Hr, depending on material density, thickness and the slot profile. -- Equipped with:This machine is currently set up with (17) router spindles on 3"" centers,Spindles are driven in groups of (3)... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. S3glqrrl MARATHON BLOK PAK 3000 TRANSFER COMPACTOR -- 100 HP motor -- 10"" Cylinder -- Ram force 235,600 lbs -- 90 Ton per hour output -- 60"" Ram penetration -- Owner's comments; it arrived new at our site on 12/12/2012, following installation, it started operating January 2013. This was used solely as a Transfer station packer for semi trailers with C&D waste. between January 2013 and June 2015, it handled 73,350 tons od C&D waste. After that, the tr... more
1
Elect./Voltage: 208/230/460 V, 60 Cy, 3 Ph 7j3e3awic ELDORADO/RICHARDS M-75-1041 Precision Deep Hole Gun Drill mounted on Richards Horizontal Boring Mill -- Drilling Diameter Maximum 1"" -- Drilling Diameter Minimum .0550"" -- Maximum Drilling Depth 48"" -- Spindle Speeds 480-3895 RPM -- Feed Rate Drilling 1-99.9 IPM -- Feed Rate Rapid 200 IPM -- Work Table 36"" x 60"" -- Height of Spindle Centerline 0-24"" -- Straightness per 12"" .001"" -- Coolant Pressure, Maximum ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Jibepdr EATON LEONARD VB100HP CNC TUBE BENDER -- Maximum tube [...] 1.00"" -- Tube length 7' -- Bed arm rotation right hand (clockwise) -- Maximum deg. of bend 195 -- Maximum centerline radius 6"" -- Centerline height 1"" -- Maximum C-Axis speed 45 RPM -- Maximum Y-Axis speed 3,000 IPM -- Maximum B-Axis speed 75 RPM -- Working Height 44"" -- IBM compatible PC -- CRT display 15"" high resolution color monitor -- Maximum number of bends per part 1... more
1

TUBE BENDER EATON-LEONARD VB300SE

North Carolina United States
599 km
1995
USED
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Y78exuq8m 1995 Eaton Leonard VB300SE 3Axis CNC HorizontalMandrel Type Tube Bending MachineGENERAL SPECIFICATIONS -- Maximum tube diameter: 3” OD -- Maximum Tube Wall Thickness Max Diameter: 0.120” wall -- Maximum bend radius: 180° + springback -- Maximum bend centerline radius: 12” -- Bending rotation: Right hand (clockwise)DESCRIPTION:3"" OD x .120 Wall Capacity 3AxisCNC Mandrel Type Horizontal TubeBending System with Eaton Leonard P... more
1
Elect./Voltage: 220/440/3/60 Djjzbsj ABBEY ETNA 1512 SWAGER -- 2-Die type. -- Capacity - tubing 1-1/2"" mild steel. -- Capacity - solids 3/4"" mild steel. -- Die length 12"". -- Die width 2-1/2"". -- Die thickness 1-5/8"". -- Hammer thickness 2-3/8"". -- Height to spindle centerline 38"". -- Spindle speed approx. 200. -- Weight approx. 4500#. -- Overall dimensions approx. 38"" x 64"" x 60"" [...] with: -- Pushbuttons for start - stop. -- 1-Set of dies. -- 7-1/2 ... more


lely cente...
every day

New machines via email!

Be informed!

to

to

Change search
LELY CENTERLINER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.