Used Lematec Drilling Machine for sale (84,279)

Condition: used, machine/vehicle number: 008321, X axis working area: 4200 mm Y axis working area: 1350 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 18 Total number of tool changer positions: 22 Kodpfsx A Tdlex Agzjnf

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Knjdsrtrx Rjpfx Agzjf Approximate Machine Weight: 8,500 kg (18,740 #)

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 Knodpsw Nytnjfx Agzof CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device Kedpfx Agodkx Anszenf - quick-action drill chuck 1-13 - illumination

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm total power requirement 4 kW Knedpsv S Iqcsfx Agzsf

Condition: new, The SSB 40 Xn, a high-performance Column Drilling Machine from KNUTH, is designed for both repair and production environments. This universal drilling machine boasts a robust and thick-walled column, powerful drives, and dependable gearboxes for spindle and feed operation. With a substantial work area and large universal clamping tables, it handles a variety of workpieces effortlessly – from small parts to large, heavy assemblies. Key features include a tilting table for angled drilling, an automatic drilling feed, and a 12-step main drive that ensures a finely segmented speed range. Moreover, the machine integrates a powerful coolant system and a modern LED light for improved visibility and operator safety. You can also easily switch the automatic feed on and off, and the simple design of the machine facilitates quick tool changes. For a reliable drilling solution, you can request a quote for the SSB 40 Xn today. Experience the precision and robustness of KNUTH’s Column Drilling Machines to enhance your workshop's productivity. Knjdpeuyg Igsfx Agzof

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm No of Top Units: 2 Ksdpeg E Th Sjfx Agzenf Lateral horizontal groups: yes

Condition: good (used), Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine -Spindle mount: B13 Knodpfx Asb A Ikisgzsf -Table size: 300 x 1100 mm -Protrusion: 150/180 mm -Spindle stroke: 50/70 mm -Weight: approx. 200 kg

Condition: used, Year of construction: 2006, total width: 1,100 mm, total length: 3,100 mm, total height: 1,700 mm, - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 466 - Main motor power [kW]: 1.1 Kodex Ig H Topfx Agzonf - Number of spindles [pcs]: 3 - Max. height adjustable [mm]: 120 - Table length [mm]: 3100 - Table width [mm]: 700 - Voltage [V]: 400 - Current consumption [A]: 2.8 - Fuse [A]: 16 - Power [kW]: 1.1 - Transport dimensions: 3100mm x 1100mm x 1700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 180 mm spindle turning speed range 25-640 U/min column diameter 180 mm table-size Ø ca. 560 mm surface area Ø 445 mm feeds 0,1; 0,2; 0,3 mm/U Ksdex Iwgqjpfx Agzjnf spindle taper MT 4 weight of the machine ca. 1 t dimensions ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds

Condition: used, Year of construction: 1960, arm length 1600 mm tool adaptor ja fabric-no. 9787 Knsdex Ik Unepfx Agzsf weight 4,6 t with drill cube

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, pressing device, stop rulers Knedpfx Agsvtm Ayozof

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Kjdpfjwuz Ekox Agzsnf Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Specially designed for staircase construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Inclined doweling and baluster drilling can be easily performed using the swiveling drilling unit. • Reversible pole motor, two speeds • Motor power 1.0 / 1.5 kW, 1,400 and 2,800 rpm • Convenient handle switch for starting the motor • With Röhm two-jaw chuck 1 – 20 mm • Linear laser for precise positioning of the workpiece • Drilling unit swivels 65 degrees to the left and right • Pneumatic adjustment of working height: doweling on two levels without repositioning • Desired drilling heights can be set for each drilling level using a digital counter, switching is pneumatic from the front • Cross adjustment 340 mm, continuously variable or in 12 mm increments using a detent rail • Pneumatic clamping possible at any position, operable from the front • Maximum height adjustment approx. 100 mm above table height • Drilling stroke approx. 200 mm • 2 pneumatic workpiece clamps, 1 clamping column can be repositioned to the front • 2 swiveling workpiece supports • Extraction funnel • Center stop + 1 side stop • Fixed mitre stop • Length stop as a round bar • Set of drill bits Kodpexmatnsfx Agzjnf • Operating manual • CE marking • The machine has been partially repainted due to existing paint splashes. • Pneumatic hoses have been replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse; see "further offers from this seller."

Condition: used, Year of construction: 1973, total height: 2,700 mm, total width: 720 mm, total length: 2,300 mm, Empty weight: 3.000 kg Kodsx Igczspfx Agzenf - Year: 1973 - Documentation available: Yes - CE certificate present: No - Serial number: 95361 - Control: Conventional - Motor power: 3.0kW - Drilling depth: 330mm - Spindle speed max.: 1120rpm - Model: iaalboormachine - Tool holder: MK4 - Table width: 600mm - Table length: 750mm - Drilling capacity: 40mm - Travel X: 1000mm - Spindle diameter: 5mm - Travel Z: 900mm - Max. reach: 1300mm - Spindle speed min.: 28rpm - Transport dimensions: 2300mm x 720mm x 2700mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, bore capacity in steel (diameter) 40 mm continious capacity 25 mm throat 315 mm bore stroke 200 mm bore depth 280 mm spindle taper MT 4 feed range 0,1-1,5 U/min column diameter ca. 230 mm number of feeds 9 table-size 700 x 600 mm surface area 450 x 560 mm distance spindle/base plate 1100 mm dimensions ca. 1000 x 700 x 2400 mm total power requirement 2,6 kW weight of the machine ca. 1,1 t Kodpsx Iwgkofx Agzjnf emergency stop switch renewed

Condition: good (used), Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile Ksdpfeb A Hd Hex Agzenf -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Condition: new, Drilling and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - Knedpsu R Tftsfx Agzsf This offer is an equipment package. The following items and options are already included in the price: - OPTImill MB 4 Optimum precision drilling and milling machine - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: used, machine/vehicle number: 008134, X axis working area: 5780 mm Y axis working area: 1930 mm Working Table: Pod and Rail Kjdpfxjw Idgis Agzonf Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 32 Total number of tool changer positions: 28

Condition: used, bore capacity in steel (diameter) 40 mm throat 385 mm bore stroke 200 mm spindle taper MT 4 Knjdpfxox H Ak So Agzjf turning speed range 61-1169 U/min table: 470 x 560 mm weight of the machine ca. 700 kg dimensions of the machine ca. 900x800x2000 mm

Condition: used, Year of construction: 1969, arm length 1600 mm taper MK 5 Ksdpfox H Txtsx Agzsnf Würfel

Condition: new, Year of construction: 2025, Continuous/Standard drilling capacity (mm): 20/23 (in E335/ST60) Tapping capacity (depending on pitch): M12 Spindle: MK II Spindle speed (stepless): 40–4000 rpm Drilling depth (mm): 100 Throat (mm): 240 Column diameter (mm): 82 Knodjir Ir Tspfx Agzsf Usable work surface (W x L) (mm): 340 x 280 T-slot size (arm), spacing (mm), width dimensions (mm): Number: 2, 125, 13/26 Speed display: Digital Drill depth display: Digital Drill depth stop: quick-adjustable stop ring Feed (mm/rev): manual Table height adjustment via rack and pinion Motor: three-phase 400V with frequency inverter (kW): 1.5 Distance spindle/work surface (mm): 160 – 880 Machine dimensions without packaging (mm): 355 x 705 x 1825 Machine dimensions with packaging (mm): 572 x 936 x 2142 Weight (kg): 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically angled front LED lighting Quick-adjust and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop impact button Thermal overload protection Spindle stop Drill guard with electrical safety interlock Connection cable with CEE plug Optional accessories: Drilling package 3 consisting of: - Machine vice [Felix] 2.0 100 mm - Keyless drill chuck 3–16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 €470.00 3-year warranty for single-shift operation Free delivery NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK US FOR AN OFFER!

Condition: good (used), Diamond core drilling machine, core drilling machine -3x: drill stand -Max. Drilling capacity: Ø 60 mm -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm -Core drill: Ø 18/24/29 mm Knjdpfsb A Idyex Agzef -Sale: only complete -Weight: 70 kg

Condition: used, GANNOMAT Compact 30 hole drilling machine - used - pneumatic clamps, foot control, 2 drilling beams with 15 spindles each Kjdpfxjwmmt Ro Agzenf ----- Technical specifications ----- Number of spindles: 30, Drill spindle spacing: 32 mm, Motor power: 2 x 0.75 kW, Voltage: 400 volts, Pneumatic connection: 6 bar, Dimensions without stop ruler: 850 x 1,100 mm, Weight: 240

Condition: new, Year of construction: 2025, Dauer-/Normalbohrleistung 18/20 mm Gewindeschneidleistung M12(steigungsabhängig) Spinde MK II Bohrtiefe 100 mm Ausladung 240 mm Säulendurchmesser 82 mm Nutzbare Arbeitsfläche B x L 340 x 280 mm T-Nutengröße (Arm), Abstand (mm), Abmessung Breite (mm) Anzahl 2, 125, 13/26 Drehzahlanzeige: Digital Bohrtiefenanzeige: Digital Bohrtiefenanschlag: schnell verstellbarer Anschlagring Bohrvorschub von Hand Tischhöhenverstellung mit Zahnstange Motor Drehstrom – frequenzgeregelt, 230 V, 0,75 kW Spindeldrehzahlen stufenlos 30 – 3000 1/min Tischarbeitsfläche: 155 - 415 mm Fußarbeitsfläche: 155 – 550 mm Maschinen-Abmessung: 355 x 705 x 1065 mm Gewicht: 170 kg Zubehör Optional: Bohrpaket 3: mit [felix] 2.0 100 Maschinenschraubstock Flott [felix] 100, Schnellspannbohrfutter 3-16 mm (Genauigkeit 0,17 mm), Kegeldorn MK 2 B18 und Reduzierhülse MK 2 auf Mk 1 Kodpfxei Azzks Agzsnf 491,00 € Werksgarantie: 3 Jahre Frei Haus einschliesslich Verpackung (nur Deutschland ) Lieferzeit: sofort ab Lager