Used Lematec Drilling Machine for sale (65,195)

Condition: good (used), Year of construction: 2001, Drilling capacity: 40 mm Spindle taper: MK 4 Arm reach: 300 - 1300 mm Weight approx.: 2300 kg Fpodpfx Ajyud Tvea Ajf Accessories / Special features: - Central clamping - Motorized vertical travel - Right-/left-hand rotation - Cube table - Coolant pump - Lighting - CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Model: GR 50 1200 Arm length: 1200 mm Drilling capacity up to: 50 mm Fjdjytb Eyepfx Aa Aopf Year of manufacture: 1995

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Fedpfewkba Hex Aa Ajpf Equipment and technical data: - 2-jaw drill chuck for up to 20 mm shank diameter - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm - Precision indexing rail 12 mm - Central locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: Fpodpfxsw I Uy Ts Aa Aef 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: excellent (used), Numerical Control Type NC 500 (Software Tooling System) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 8 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Fpodpfx Ajyvrrqja Aof Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 72,2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (X axe) of the conveyor belts The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm Fpsdpfx Aoxyf E Nea Aef • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: used, Year of construction: 2007, functionality: fully functional, Machine for drilling holes for dowels URBAN DB 3100, year 2007 Condition: very good - Profile clamping system and drill feed operated by foot switch Fodpfx Aewinq Nea Ajpf - Electric drilling motor switches off automatically at the end of the drilling process - Drill feed speed and drilling depth individually adjustable - Quick-clamp chuck for standard drill bits up to max. Ø13mm - Left and right support tables

Condition: used, spindle mount: MK 4, drilling depth: 50 mm, overall weight: 2,300 kg, Radial Drill Brand: Foradia Model: GH 50-1000 Serial No.: 5080 Drilling capacity: 50mm Maximum radius: 1,135mm Minimum radius: 425mm Longitudinal head travel: 700mm Column diameter: 250mm Usable arm from column edge: 300mm Vertical arm stroke: 620mm Minimum spindle-to-base distance: 300mm Maximum spindle-to-base distance: 1,145mm Spindle stroke: 225mm Fodpfxsymw I Do Aa Aspf Morse taper: 4 Speeds: 12 (35-1460rpm) Automatic feeds: 6 (0.05-0.35) Motor power: 3.5 + 1.5 Hp Weight: 2,300kg

Condition: used, 4-spindle adjustable vertical drilling machine, Camam brand Fodpfx Aaoivutco Ajpf + 3 spindles to be revised

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 12,000 rpm, total length: 9,300 mm, total height: 4,300 mm, table width: 1,250 mm, total width: 6,900 mm, table length: 1,250 mm, overall weight: 50,000 kg, 5-Axis Bed-Type Milling Machine AX5 TLF, 2009, Heidenhain iTNC530, Rotary Table, HSK-A100 Listing Description: For sale: AX5 TLF bed-type milling machine manufactured in 2009, featuring an integrated rotary table and fully programmable axes. The machine is designed for precise multi-axis machining, including complex components requiring 5-axis operation. Its design includes a swivelling head and a rotary table, ensuring extensive technological capabilities for the machining of large-format parts. The machine is equipped with a Heidenhain iTNC530i CNC control, HSK-A100 spindle taper, and through-spindle coolant supply. Additional features include a Renishaw workpiece probe and a 30-position tool magazine. For more information, photos, sales conditions, or to schedule an inspection, please contact us. Technical Specification: Model: AX5 TLF Type: 5-Axis Bed-Type Milling Machine Year of Manufacture: 2009 Axis Travels: - X-Axis: 3,200 mm - Y-Axis: 1,200 mm - Z-Axis: 1,200 mm - B-Axis (swivelling head): ±95° - C-Axis (rotary table): 360° Rotary Table: - Diameter: 1,250 mm Spindle: - Taper: HSK-A 100 - Spindle Speed: 12,000 rpm - Through-spindle coolant CNC Control: - Heidenhain iTNC530i Fodpfxeyzfb Ns Aa Ajpf Additional Equipment: - Renishaw workpiece probe - Tool magazine: 30 positions Machine Dimensions: - Length: 9,300 mm - Width: 6,900 mm - Height: 4,300 mm - Weight: 50,000 kg

Condition: new, Year of construction: 2026, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection Fjdpfxjfx U D Aj Aa Aopf - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 1980, condition: excellent (used), 1 piece drilling beam 21 drills, grid system 32 mm32 mm max. travel of the drilling beam min. 22 mm to max. 624 mm Row spacing min. 125 mm , max. 603 mm ( drilling line ) Engine4.4 kW Fpodpfx Ajfhn Irea Asf Drill stroke 98 mm Oil brake cylinder with stroke 70 mm Operating pressure approx. 6.0 bar Air consumption approx. 3 l/cycle Traverse path from min. 20 mm to max. 650 mm Weight approx. 540 kg Dimensions : 2500 x 1100 x 1700 mm The machine is still being reconditioned and checked for function condition very good

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, hole spacing: 32 mm, Ganner Gannomat belt and line boring machine Blum and Grass drill head 7 Spindle row hole drilling head incl. extension rulers Fsdpfx Aoq E Ur Aoa Ajpf 32 mm system pneumatic version

Year of construction: 1981, condition: excellent (used), 2 piece boring bar 21 drills, grid system 32 mm32 mm Max travel of the drill bar of min. 22 mm up to 624 mm Rows spacing min. 125 mm, 603 mm (drill line) 1 pneumatic cylinders between the drill bar Motor4. 4 kW Stroke 98 mm Fsdod Attpopfx Aa Aopf Oil brake cylinder with stroke 70 mm Operating pressure approx. 6.0 bar Air consumption approx. 3 l / stroke Travel distance of at least 20 mm to 650 mm Masch.Nr.: 705521 Weight approx. 540 kg Dimensions: 2500 x 1100 x 1700 mm The machine is still processed and checked for function Condition very good

Condition: ready for operation (used), Alzmetall AB 30 / R-1400 radial drilling machine - Arm reach: 1400 mm - Drilling capacity / steel: 45 mm Fodjyyndqspfx Aa Aopf - Maximum thread cutting: M30 - Spindle taper: MK 4 - Spindle stroke: 160 mm - Speed range: 40 - 1800 rpm - Automatic feeds: 4 steps / 0.15-0.36 mm/rev - Column diameter: 300 mm - Clamping cube - Motor power: 3 kW Dimensions (LxWxH): 2.3x1x2.2 meters / Weight: 1700 kg Errors and input mistakes excepted.

Condition: new, 20 mm 40 mm MK 4 spindle stroke 160 mm throat 300 mm column diameter 145 mm 615x430 mm Fpedpfx Aaeyv Nxbs Asf 2x14x224 mm distance spindle /table 147/688 mm feed 0,1-0,2-0,3-0,4 mm/U 140-4000 U/min. total power requirement 4,0 kW Machine height 1885 mm Standard equipment: - Electromagnetic feed clutch with overload protection and electrical    Cross Handle Switches - Control and light transformer - Main switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Clockwise rotation by contactor control - Speed adjustment stepless - Speed display digital - Speed setting electrically - Protection IP 54 - Motor insulation class "F" - Spindle protection with electrical protection

Condition: new, 14 mm M 10 MK 2 230-4.000 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel Machine height 825 mm total power requirement 0,7 kW weight 93 kg Standard equipment: 5" TFT LCD display with touch function: Manual input of spindle speed setpoint setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU. - AC motor 230 Volt, 50 Hz - Connection plug ready fitted, cable length 3 m - Infinitely variable speed adjustment via potentiometer - Three separate buttons for clockwise rotation - anticlockwise rotation - stop (spindle stop due to brake function) - Spindle protection with electrical fuse Fsdjyv Nqdspfx Aa Aepf - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Control voltage 24 Volt - Protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Item 37.6 MAXIMUM DRILLING DEPTH DISPLAY as a measuring function for the current drilling depth

Condition: new, 32 mm bore stroke 125 mm Short spindle MK 3 throat 210 mm Fjdpfx Aasyv Npgo Aspf Machine table - usable table surface 390x390 mm table load 65 kg spindle turning speed range 150-2.500 UpM Power requirement 16 A total power requirement 1,5 kW Overall size 750x450x1745 mm weight of the machine ca. 187 kg Standard equipment: - Stepless speed adjustment - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - According to current CE conformity

Condition: new, 16 mm M 12 MK 2 100-2.000 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel Machine height 825 mm total power requirement 0,7 kW weight 93 kg Standard equipment: 5" TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function. setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU. - AC motor 230 Volt, 50 Hz - Connection plug ready fitted, cable length 3 m - Infinitely variable speed adjustment via potentiometer - Three separate buttons for clockwise rotation - anticlockwise rotation - stop (spindle stop due to brake function) - Spindle protection with electrical fuse - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Control voltage 24 Volt - Protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Fsdpjyv Nn Njfx Aa Aopf Item 37.6 MAXIMUM DRILLING DEPTH DISPLAY as a measuring function for the current drilling depth

Condition: new, 23 thread capacity M10 bore stroke 90 mm Fpsdpfxoyv Nmfj Aa Ajf Short spindle MK2 throat 180 mm Machine table - usable table surface 285x285 mm table load 45 kg spindle turning speed range 150-1.250/350-3.000 UpM total power requirement 0,75 kW Overall size 735x470x1080 mm weight of the machine ca. 106 kg Standard equipment: - Digital speed display - Movable LED machine light - Stepless spindle speed via frequency converter - Tiltable work table +/- 45 degrees - Mains cable and plug so ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - In accordance with current CE conformity

Condition: new, 18 mm M 12 M 14 MK 2 225-4.300 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel total power requirement 0,37/0,55 kW Machine height 840 mm weight 120 kg Standard equipment: - Main switch with motor protection switch lockable - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP Fedpoyv Nddjfx Aa Ajpf - Spindle protection with electrical protection

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, 2 drilling spindles, individually selectable 1 glue gun (note: glue pump missing) Dowel insertion tool for 8 x 40 mm dowels The following issues were identified during testing: - Glue specification missing - Center stop rule missing - On the left working field, the front stops do not engage; instead, they lower when drilling on the right field Fpedpfjytq R Ejx Aa Ajf - SPS module Beckhoff repeatedly fails. Machine must then be restarted. - Rubber pads under the hold-downs are missing. When inserting the dowels, the parts deform because the surface is too smooth

Condition: excellent (used), Alzmetall AC 25 pillar drilling machine, year of manufacture 1992. Very good condition, can be inspected under power. Fpedpfx Aaox Sqv Ho Ajf

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Fpjdpfxefu Iwms Aa Asf Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. ADVANTAGES Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. product details Standard measuring lengths: Fpsdpfx Asfu Swxja Aef 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Optional: thread cutting device Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.