Radial Drilling Machine

BERGONZI TR 40 - 1000 H

Condition: used, Year of construction: 2006, Technical details: max. wheel diameter: 300 mm max. module: 7 weight of the machine ca.: 15 t table turning speeds: 100 U/min table diameter: 180 mm hob turning speeds: 750 U/min max. hob diameter: 300 cutter length max.: 230 mm Liebherr LC300 with loading automation Machine including counter holder Lajdsyz Sd Rspfx Ahaoh The machine used to work with emulsion *

Condition: good (used), Distance between centers: 1000 mm Center height: 175 mm CNC brand: FANUC CNC model: Oi-TD Ljdpfx Ahjtrgn Tjaoah

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Lajdpfsu Nc Rijx Ahajh Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Lasdpfx Ahjtx Dn Ueash

Condition: new, Year of construction: 2022, IN STOCK -- The ARG 235 plus is a manual metal bandsaw with high cutting accuracy. This machine allows miter cuts from -45° to +30° continuously (swivel range left 45° and right 60°) Ledpfxemftv Rs Ahaoah Technical Specifications: ● Cutting range: - 90° round: 235 mm / square: 230 mm / rectangle: 280 x 180 mm - 45° Right round: 165 mm / square: 145 mm / rectangle: 185 x 180 mm - 30° Right round: 115 mm / square: 80 mm / rectangle: 115 x 80 mm - 45° Left round: 185 mm / square: 160 mm / rectangle: 185 x 100 mm ● Drive Power Saw Blade: 0,9 / 1,4 kW / 400 V / 50 Hz ● Saw Blade Speed: 40 and 80 m/min ● Saw Blade: 2710 x 27 x 0,9 Standard Equipment: ● Powerful saw blade drive ● Stepless adjustment of the cutting feed from the control panel ● Manual clamping of the workpiece, movable clamping stock with dovetail guide ● Easy adjustment of the saw for miter cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in different sizes or versions!

Condition: new, Year of construction: 2024, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, total length: 7,600 mm, total height: 3,000 mm, total width: 2,650 mm, overall weight: 14,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, DYAS 3 BDC CNC Beam Profile Machining Center Operating Range for Section Min. 200 x 80 mm / Max. 1200 x 500 m Operating Range for Length Min. 2000 mm / Max. 12000 mm (Gross: 12500 mm ) Drilling Head (Spindle) 3 Spindle Speed 50-4000 (stepless) rpm Spindle Power 22 Kw Spindle Torque 280 Nm Tool Changer 6 for each spindle , total 18 Tapping Capacity M10-M30 Bandsaw (Optional) Ljdpfx Ajgbdpkjhaoah Cutting Speed 20-100 m/min / Mitering Angle +60°/-45°

Condition: like new (used), Year of construction: 2015, operating hours: 987 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 661 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HURCO, controller model: WinMax 5, total height: 3,010 mm, total length: 4,800 mm, total width: 2,300 mm, table width: 660 mm, table height: 1,000 mm, table length: 1,680 mm, table load: 2,000 kg, overall weight: 8,420 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 987 h, distance table center to spindle nose: 101,711 mm, spindle motor power: 18 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, This CNC HURCO VMX60i machining center has seen very little use and is in excellent working condition. With only 987 operating hours and 4,115 power-on hours, it represents an ideal solution for those seeking a reliable, ready-to-use machine with extremely limited usage compared to its age. Key features: * CNC Hurco WinMax / MAX 5 * X/Y/Z axis travels: 1524 x 661 x 610 mm * ISO40 spindle at 12,000 rpm * 18 kW spindle motor * 1680 × 660 mm table with a load capacity of 2,000 kg * 30-position chain-type tool magazine The price refers to the machine in the configuration described in the technical data sheet. Upon request, the following equipment can also be provided: * Fourth-axis table * Tailstock * Set of tool holders Ledpszmfn Rofx Ahajah The supply of the equipment will be quoted separately based on the customer's needs. For over 30 years, Otto Machine has been selecting and marketing used machine tools in Italy and abroad. The machines can be viewed in our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. We can arrange a visit to our showroom or a video call to view it remotely.

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width 2200 mm Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details. Laedpfx Aswpud Aehaoh

Condition: reconditioned (used), functionality: fully functional, center height: 160 mm, center width: 650 mm, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, Ljdpfxjwhx I Ns Ahasah For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is particularly distinguished by its Siemens control panel and completely stepless speed control. As the name suggests, the VC can operate at a constant cutting speed. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160 mm Center distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper mount: MT3 Quill stroke: 85 mm Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg Other equipment and accessories: Siemens control panel, coolant system, chuck guard, lead screw and feed screw covers, 2 emergency stops, operating instructions, CE declaration of conformity, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field of mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts will be replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Laodpfxsh Tnpxj Ahash