Used Leveler for sale (5,880)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: SN.: 19-03-028, Granite sub-table with pneumatic level compensation, including subframe with 3 drawers, from Integrated Dynamics Engineering. Year of manufacture: 2003. Serial no.: 19-03-028. Length: 80 cm, width: 80 cm, height: 86 cm including subframe. Kdjlhccjya Dttsqpeg

Condition: used, Year of construction: 1966, 5 weight 5 t . Kdjlhox U A Nkjccqpsg

Condition: used, clear span: 1,860 mm, total width: 11,720 mm, total height: 2,500 mm, Technical Data for Pallet Racking System: Racking System: Alser Type: NS Setup Specifications: Number of rack rows: 01 pcs Length per rack row: approx. 11,720 mm Number of bays per rack row: 06 pcs of 1,860 mm each Number of levels plus ground level: 02 pcs Volume Specifications: Pallet locations per bay: 06 pcs Pallet locations per row: 36 pcs Total pallet locations: 36 pcs Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. pallet weight: approx. 1,000 kg Scope of delivery includes: 07x pallet racking uprights, used Material color: brown Profile dimension: C80 x 40 x 15 x 2.00 mm Including horizontal and diagonal braces, base plates Uprights are pre-assembled Max. bay load: 4,000 kg At buckle height: 1,250 mm (min. 5 bays per row) Kdelhccqex Upqbepsg (welded truss) 2,500 mm high 1,050 mm deep 24x pallet racking beams, used Material color: orange Profile dimension: S 110 x 55 mm Beam type: B113 Connector: 2 HK Clear width: 1,860 mm Max. load per pair of beams: 2,000 kg, with evenly distributed load 48x safety pins, used Material finish: sendzimir galvanized For securing longitudinal beams against unintentional lifting 28x anchor bolts, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Material: sendzimir galvanized To level uprights set up on uneven ground 01x load plate with information on bay and shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm General Information about the Item: This item is offered for collection only. Any transportation or shipping of this item is subject to additional costs, which can be provided upon request depending on the delivery location and order volume.

Condition: used, Year of construction: 1996, material width 500 mm material thickness 0,3 - 3,0 mm no. of straightening rolls 5 straightening roll diameter 40 mm number of draw-in rolls 2 diameter of draw-in rolls 80 mm material cross-cut 600 mm² material thickness at 500 mm material width 1,2 mm material thickness at 200 mm material width 3,0 mm power requirement 4,0 kW weight 2,0 t Kjljvuum Nehccqpedg dimensions (WxDxH) 1,5 x 1,5 x 1,9 m with motor, upper straightening rolls individually manually adjustable, neumatic adjustment of the infeed rolls, coil loop control via ultrasonic sensor as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1970, material width 200 mm material thickness 0,5 - 3,0 mm no. of straightening rolls 6 straightening roll diameter 70 mm Kdolhccjvzxm Heqpog number of draw-in rolls 2 diameter of draw-in rolls 160 mm power requirement 3,1 kW weight 1,1 t dimensions (WxDxH) 1,5 x 1,2 x 1,9 m as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 2001, material width 400 mm material thickness 0,7 - 4,2 mm no. of straightening rolls 7 straightening roll diameter 80 mm number of draw-in rolls 2 + 2 diameter of draw-in rolls 80 mm speed 18 m/min power capacity 2,5 kW weight 0,8 t Dimensions (WxDxH) 1,0 x 1,3 x 1,5 m with motor driven, with coil loop control via contact plate, roll adjustment separately manual Kolhccjvzxqfjqpjdg

Condition: used, material width 250 mm material thickness 0,5 - 4,0 mm no. of straightening rolls 9 straightening roll diameter 60 mm number of draw-in rolls 2 power requirement 3,8 kW Weight 0,8 t Kdslhccovzxn Roqpog Dimensions (WxDxH) 1,6 x 0,8 x 1,5 m with infinitely variable drive

Condition: used, Year of construction: 1983, material width 200 mm material thickness 0,8 - 3,0 mm no. of straightening rolls 6 straightening roll diameter 53 mm Kdjlhccsvuk R Roqpeg number of draw-in rolls 2 diameter of draw-in rolls 96 mm material cross-cut 400 mm² speed 3 - 15 m/min power capacity 0,75 kW weight 0,5 t Dimensions (WxDxH) 1,0 x 1,0 x 1,4 m with infinitely variable drive, straightening rolls individually manually adjustable, coil loop control can be inspected in running condition in our warehouse

Condition: used, material width 210 mm no. of straightening rolls 6 straightening roll diameter 40 mm Kdolhcovzxndocqpsg dimensions (WxDxH) 0,45 x 0,6 x 1,1 m Straightening device with height adjustment of base frame

Condition: excellent (used), CATALOG NUMBER 7590 Kdelhccjv Nhpmeqpjg Technical specifications: - Shaft width: 500 mm - 3-knife shaft - Shaft guard - Table length: 2360 mm - Cast iron tables - Both tables adjustable - Cast iron fence adjustable at an angle - Motor approx. 3 kW - Dimensions (L/W/H): 2360x1000x1000 mm - Weight: 630 kg Advantages: – Italian production – Used jointer – Intended for professional use Net price: 6900 PLN Net price: 1640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7571 Technical specifications: - Roller width: 510 mm - Table length: 3040 mm - Noise reduction comb - Roller guard - Cast iron tables Kolhev H Dugsccqpedg - Both tables adjustable - Original adjustable cast iron fence with angle setting - Motor: 3 kW - Extraction port diameter: 130 mm - Dimensions (L/W/H): 3040x850x1000 mm - Weight: 1032 kg ADVANTAGES – German-made – Possibility to mount profile knives – Long tables – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,120 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7568 Technical Data: - Shaft width: 510 mm - Shaft guard - Sound dampening comb - Number of knives: 4 pcs - Table length: 2940 mm - Cast iron tables - Both tables adjustable - Original adjustable angle fence - Motor: 5.5 kW - Extraction nozzle diameter: 140 mm - Dimensions (L/W/H): 2940x950x1240 mm - Weight: 1330 kg ADVANTAGES – Polish production – Top control panel – Four-knife shaft Kolhccqjv H Dapspedg – Used jointer – Very good condition Net price: 16,900 PLN Net price: 4,020 EUR (based on 4.2 EUR rate) (Prices may change with significant fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,200 h, load capacity: 2,500 kg, lifting height: 135 mm, fuel type: electric, construction height: 1,200 mm, fork length: 2,400 mm, drive type: Elektro, Low-level order picker Load center of gravity: 600 Technical condition: good Battery voltage: 24V Battery Ah: 500Ah Battery type: PzS Description: Find your forklift at STA-TECH! Whether pallet trucks, electric, diesel, or LPG forklifts – we offer affordable, ready-to-use models and new forklifts. STA-TECH is your partner for: • Purchase and rental of forklifts and warehouse equipment • Purchase of used equipment and logistics • Cross-manufacturer service: repairs, maintenance, inspections Kelhccqowdz Dlopedg Load protection grids,

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm Kdjlhevuk Sbsccqpog speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m with infinitely variable drive, material inlet inclineable, straightening rolls individually manually adjustable, pneumatic opening of the upper roller cassette, coil loop control via arm as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1990, material width 150 mm material thickness 0,5 - 5,0 mm no. of straightening rolls 7 Kdelsvuk N Hehccqpjg straightening roll diameter 45 mm number of draw-in rolls 2 inlet roll diameter 72 mm material thickness / at material width 3,0 / 150 mm material thickness / at material width 4,0 / 120 mm material thickness / at material width 5,0 / 80 mm power requirement 3,0 kW weight of the machine 0,7 t dimensions (WxDxH) 1,3 x 1,1 x 1,6 m with infinitely variable drive, straightening rolls individually manually adjustable, coil loop control via light barriers as is where is, WITHOUT additional work The putting into operation in our warehouse can be offered additionally on request

Condition: used, Year of construction: 1982, material width 250 mm material thickness 0,4 - 5,0 mm no. of straightening rolls 9 straightening roll diameter 60 mm speed 3 - 15 m/min material thickness at 250 mm material width 3,5 mm material thickness at 100 mm material width 5,0 mm power requirement 1,8 kW weight 0,9 t dimensions (LxWxH) 1,45 x 1,4 x 1,55 m with infinitely variable drive, centralized adjustment of the straightening rolls, indication via dial gauges, support of the levelling rolls, coil loop control via proximity switch material thickness 3,5 mm at material width 250 mm material thickness 5,0 mm at material width 100 mm can be inspected in running condition in our warehouse Kdelhevuk Nyoccqpog

Condition: used, Year of construction: 1992, miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage. Additional title: Fill level inspection system Capacity: 24000 b/h Operation / Control: at control box Kdolhccqox T An Dspeg Material: Painted steel / stainless steel Position: free-standing / mounted on bottle transport Base construction: Housing with evaluation electronics with tubular frame on spherical feet Features: Measuring device, control electronics, bottle ejector

Condition: excellent (used), CATALOGUE NUMBER 7606 Technical data: - Shaft width: 500mm - Number of knives: 3 pcs - Shaft guard - Table length: 2530mm - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable at an angle - Motor: 3kW Ksljv Tczfohccqpsdg - Dimensions (L/W/H): 2530x1000x1100mm - Weight: 920kg ADVANTAGES – Made in Italy – 3-knife shaft – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,100 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2025, material width 100 mm material thickness 15 mm no. of straightening rolls 9 straightening feed 7 m/min total power requirement 0,75 kW weight of the machine ca. 380 kg dimensions of the machine ca. 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² Kolhcjurni Uscqpsdg - Mobile use on casters - Operating instructions

Condition: used, Sound level meter, sound level meter, sond level meter -Manufacturer: Voltcraft, Sond Level Meter sound level meter Kelhccjr Im Rmeqpedg -Type: 33-2050 -Part No.: 100609 -Dimensions: 170/60/H50 mm -Weight: 0.3 kg

Condition: good (used), Level controller Kdjlhccqsb A I Thspog -Type: ENH-10 -Number: 2x switches available -Price: per piece -Weight: 1.3 kg

Condition: used, Sensor, probe, immersion probe -Manufacturer: KFG Level, magnetic level sensor Kslhcofylb Sscqpodg -Type: KA-10310/3 -Dimensions: 215/150/H75 mm -Weight: 0.4 kg

Condition: good (used), Level indicator, sight glass, steel reflector, sight glass fitting, sight glass device Kdelhccqoh Sy U Uspsg -Manufacturer: Eriks, Econ Level Indicator -Type: FIG. 1590 -Test pressure: 3 bar -Number: 2x level indicators available -Price: per piece -Dimensions: 100/60/H3050 mm -Weight: 25 kg/pc.

Condition: good (used), machine spirit level, block spirit level, frame spirit level, spirit level, precision spirit level, frame spirit level -Machine spirit level: frame spirit level -Frame size: 150 x 30 mm Kdolheu H R A Ioccqpsg -Reading: 0.3 mm/m -Dimensions box: 195/195/H55 mm -Weight: 1.7 kg

Condition: used, Castors, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, leveling roller foot -Manufacturer: Auto CFT Carrymaster, leveling roller 1 set / 4 pieces Kdjlhccou Sv Uyjqpeg -Type: AC-1000 -Load capacity: 540 kg -Roll: Ø 72 x 31 mm -Adjustment range: 120 - 139 mm -Number: 2 sets of leveling rollers available -Price: per set -Single dimension: 140/103/H120 mm -Weight 1.6 kg/piece