Used Lifting System for sale (51,714)

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, Image processing system consisting of 5 million pixel B/W camera ( model number CA-H500M) and image processing controller (model number XG-X1500). The set includes cables and a white backlight (model number CA-DSW30). Type: Camera*1 Image pickup element:2/3" B/W CCD image receiving element, 11x high-speed square pixel capture, 5,050,000 pixel Cell size 3, 45 x 3, 45 µm Valid pixel count:4,990,000 pixels 2432 (H) x 2050 (V) Rodemza Ilspfx Ap Iew Pixel transmission speed: 130 MHz (65 MHz x 2 channels) Scanning system: Full frame (61.2 ms), interlaced (40.3 ms) Transmission system: Digital serial transmission Electronic shutter: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 ms to 9000 ms can be set with numerical values. Lens mount: C screw mount

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Rjdpfxomx Sl Te Ap Iow Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline

Condition: good (used), Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Scissor lift table: movable, with roller conveyor 500 x 2400 mm Rodpfouppikox Ap Ijw -Load capacity: 1000 kg -Platform: 2400 x 820 mm -Stroke travel: 900 mm -Dimension when retracted: Height 240 mm -Dimension when extended: Height 1140 mm -Rollers: Diameter 40 x 500 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Rail spacing: 1554 mm -B. Pressure: 160 bar -Weight: 372 kg

Condition: used, Year of construction: 2021, Used MOC cleaning system, type Cleaning System 100. Continuous degreasing system for use with aqueous cleaning agents or emulsions. Rodpfezicl Eex Ap Iow The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 12/2021 Manufacturer: MOC External dimensions: Length, max.: 1,500 mm Width: 1,500 mm Overall height: 1,700 mm Infeed height: 900 mm Usable size: Width: 650 mm Height: 300 mm Belt design: wire mesh in stainless steel Energy data: per station Power: 2 kW Pressure, max.: 3 bar Caustic solution flow rate: 7.5 m³/h Transport drive: 0.5 kW Max. load: 20 kg/m Speed: 1.4 m/min, adjustable with oscillation Tank volume: approx. 500 l Heating: 18 kW Connected load: approx. 25 kW Material: Stainless steel 1.4301, all parts in contact with the medium or corrosion-resistant Special features: Cabin structure: in a robust steel construction and with all necessary inlet and outlet connections including a 100 µm filter in the return line and sludge collection rings with drain and overflow 1 heating unit with thermostat, electric 1 complete pumping unit, piped Pump with base plate and motor 1 set of nozzles 1 set of PVC aprons, easily removable 1 drain per tank with manual ball valve 1 blow-off station with on-site compressed air, flat jet nozzles and air ducting Electrical control cabinet The control cabinet contains all contactors and fuses with VPS control

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, overall weight: 95 kg, - Leasing options available!!! - Modular expandable basic contour measuring system, Z-axis measurement direction downwards Optional functions expandable via software update: - Up/Down measurement direction switch - Roughness measurement - QR code scanner (for probe arms and reference parts) - Data export to QS-Stat (dfq data) - Dominant waviness - Free commissioning and training within a 150 km radius - - Free software update for contour software Scope of delivery: - Complete mechanics with Y-axis adjustment table (17 mm travel) - Integrated controller - PC W11/64-bit; 24" TFT flat screen - ConturoMatic software; operating manual - Dust cover, robust design, water-repellent Redozict Ajpfx Ap Ijw Technical data: Measuring range X 250 mm Measuring range Z 320 mm Resolution 1 nm Measuring systems: optical incremental System accuracy +/- (0.9 µm + L/100) µm * [L = mm] Probe force control Measuring speed 0.1 - 3.0 mm/s, automatically optimized Positioning speed up to 25 mm/s Table load capacity 35 kg Precision guide on hard stone base Weight 95 kg

Condition: used, machine/vehicle number: 007135, Max. panel width: 800 mm Rjdpfx Ast Hmppjp Ijw Max. panel length: 2500 mm Panel return for edgebander: Left

Condition: good (used), mileage: 389,867 km, power: 235 kW (319.51 HP), first registration: 04/2011, fuel type: diesel, tire size: 315/60R22,5, axle configuration: 6x2, wheelbase: 3,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: air, total length: 8,720 mm, total width: 2,550 mm, total height: 3,190 mm, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Manual - PTO (power take-off) - Standard sleeper cab - Pump - Radio/cassette - Reversing camera Redpfxjx Ehpuo Ap Ijw - Fabric - Blind spot sensor = Notes = Number of axles: 3, Configuration: 6x2, Unladen weight: 11,780 kg, Gross weight: 26,000 kg, Total tank capacity: 300 liters, Fifth wheel: Fixed, Number of locks: 1, Cab type: Standard sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Multicolored, Metallic, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Air conditioning, Seat heating, Blind spot sensor, Flashing lights, Engine power: 235 kW (315 hp), Fuel: Diesel, Euro: 5, Transmission type: Automatic, Gears: 6, Power steering, ABS, ASR, PTO, PTO type: 1, Starter battery, System length: 520 cm, Pump, Hook system height: 130, Central locking, Seating arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, LOW ENTRY / 6X2*4 / LAST AXLE STEERING = Further Information = Axle configuration Tire dimensions: 315/60R22.5 Brakes: disc brakes Suspension: air suspension Axle 1: steered; left tire tread: 5 mm; right tire tread: 7 mm Axle 2: twin tires; inner left tire tread: 6 mm; outer left: 3 mm; inner right: 1 mm; outer right: 11 mm Axle 3: lift axle; steered; left tire tread: 4 mm; right: 3 mm Weights Unladen weight: 11,780 kg Payload: 14,220 kg gross vehicle weight: 26,000 kg Functionality Load platform height: 110 cm Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, years of manufacture, and price categories. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing selection • Recognizable quality • Good prices • Proper business practice • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates are quickly arranged • Expert technical services • The safety of “recognizable quality” • And more.... Please visit our website for special offers and the full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request through our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Rsdpfx Apoywd I To Ijw Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall igned for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: used, Year of construction: 2011, Dimensions: Lifter 1 2.010 x 2.050 x 2.074 mm Dead weights: Lifter 1 1.225 kg weight max. in kg 2.000 kg Rjdpfx Apozhpato Ijw Effective stroke 1.040 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: new, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine extraction systems for air volumes of up to 10,000 m³/h. can be used. Manufactured in accordance with the new EU standard EN 16770 they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 180 mm, Volume flow: 2,610 m³/h, Nominal volume flow: 1,832 m³/h, max. negative pressure: 2,450 Pa, Filter area: 13.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 2 pieces, Motor: 3.0 kW, Dimensions (LxWxH): 2,085 x 900 x 2,130 mm, Weight: 414 kg, Sound pressure level: 76 dB(A), Redsu T Hriepfx Ap Ijw Dust class: M incl.: an attached control cabinet

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 Rsdpfx Aeu R Szysp Ijw - new exhibition machine -

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Rodsv Nhg Sspfx Ap Iew Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: used, Year of construction: 2007, operating hours: 2,970 h, load capacity: 500 kg, lifting height: 15,000 mm, fuel type: diesel, Year of manufacture: 2007 Empty weight: 6.180 kg GVW: 6.680 kg Dimensions (LxBxH): 412 x 225 x 275 cm Rodpey Nwrvefx Ap Isw Working height: 1.500 cm

Condition: used, Year of construction: 2007, operating hours: 6,480 h, power: 26 kW (35.35 HP), load capacity: 230 kg, fuel type: diesel, Equipment: all wheel drive, Year of manufacture: 2007 Engine capacity: 1.498 cc Empty weight: 8.090 kg GVW: 8.320 kg Rsdsxg Iycopfx Ap Ijw Dimensions (LxBxH): 577 x 230 x 237 cm Mast: articulated arm Working height: 1.765 cm Average fuel consumption: 4 l/100km (71 MPG)

Condition: used, Year of construction: 2007, operating hours: 5,910 h, load capacity: 230 kg, lifting height: 17,650 mm, fuel type: diesel, Equipment: all wheel drive, Year of manufacture: 2007 Empty weight: 8.090 kg GVW: 8.320 kg Dimensions (LxBxH): 577 x 230 x 237 cm Mast: articulated arm Working height: 1.765 cm Rjdexnrcwepfx Ap Ijw

Condition: used, Year of construction: 2017, operating hours: 3,000 h, load capacity: 230 kg, color: red, Year of manufacture: 2017 Mast: articulated arm Working height: 2.000 cm Rjdpfxoxiwk Ne Ap Isw

Condition: used, Year of construction: 2016, operating hours: 3,550 h, load capacity: 230 kg, Year of manufacture: 2016 Mast: articulated arm Rsdpsxiwh Usfx Ap Iow

Condition: used, Year of construction: 2016, operating hours: 2,880 h, load capacity: 230 kg, Year of manufacture: 2016 Mast: articulated arm Working height: 1.200 cm Boom radius: 6.7 m Rjdpfjy Nwytjx Ap Ijw

Condition: used, Year of construction: 2007, operating hours: 6,550 h, load capacity: 230 kg, lifting height: 17,650 mm, fuel type: diesel, Equipment: all wheel drive, Year of manufacture: 2007 Empty weight: 8.090 kg GVW: 8.320 kg Dimensions (LxBxH): 577 x 230 x 237 cm Mast: articulated arm Redpfx Aoy Nwxcjp Ijw Working height: 1.765 cm

Condition: used, Year of construction: 2016, operating hours: 500 h, load capacity: 320 kg, Year of manufacture: 2016 Rodpfx Aoy Nwymep Isw Empty weight: 2.781 kg GVW: 3.101 kg Dimensions (LxBxH): 241 x 12 x 250 cm Working height: 1.175 cm

Year of construction: 2023, condition: excellent (used), Flowtech Flowboost 2V JH1 water pump system with tank 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph Rodpfoulianex Ap Iow

Year of construction: 2023, condition: used, functionality: fully functional, THM Recycling Solutions Granulation System Plastics Shredder, Granulation and Washing System comprising THM Recycling Solutions granulation unit with: THM FR300/235/215-25-7500 inlet belt conveyor (2024) THM ZM 1000 granulator (2023) THM FR300/235/215-25-7500 outlet belt conveyor (2024) HAG HA-SNP-P-20-14-0-7.5 hydraulic unit,12 bar Pierret guillotine cutting system with: Pierret G35RI guillotine cutting machine Rjdszhudwepfx Ap Isw Pierret G28RI guillotine cutting machine 2x belt conveyors for infeed and outlet

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,247 h, load capacity: 1,400 kg, lifting height: 5,402 mm, fuel type: electric, mast type: triplex, drive type: Elektro, High-lift pallet truck Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Normal Battery voltage: 24V Battery capacity: 375Ah Rsdpfxezhc N Io Ap Iow Battery type: PzS Battery year of manufacture: 2025 Description: For dealers or export only.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 128 h, load capacity: 1,200 kg, lifting height: 3,090 mm, fuel type: electric, mast type: simplex, construction height: 1,950 mm, drive type: Elektro, High-lift pallet truck Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Rodpezhc Nzsfx Ap Iow Battery type: Lithium-ion Battery year of manufacture: 2022

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 116 h, load capacity: 1,200 kg, lifting height: 3,090 mm, fuel type: electric, construction height: 1,950 mm, drive type: Elektro, High-lift pallet truck Condition: Ready for use and fully functional Rjdjzhc Nhepfx Ap Ijw Technical condition: very good Battery voltage: 24V Battery type: Lithium-ion Battery year of manufacture: 2022