Used Longitudinal Seam Welding Machine for sale (93,423)

Condition: new, Year of construction: 2025, Technical Specifications: Model: KMD20 Operated: Motorized Pressure Input: Up to 6 bar Power: 20KVA Iedotmfzujpfx Acujtn Welding Capacity: 1.5+1.5mm mild steel Maximum Force(6 bar): 115daN Input Voltage: 380V/50Hz Protection Fuse: 63A Seam Weld Arm Length: 200mm Cooling: Water cooling (8L/min) Power Input Cable: 3m Protection Class: IP21 Power Level: %0-99 power adjustable by controller Weld Time: 1-99 Cycle adjustable by controller Dimensions (W/L/H): 450m x 1000mm x 600mm Weight: 203Kg

Condition: used, Year of construction: 1971, nominal power at 50% duty cycle: 100 kVA, Manufacturer: Nimak Type: NMP 7/100 Year of manufacture: 1971 Machine No.: 71059 Rated power: 100 kVA at 50% duty cycle Connected load: 175 kVA Primary voltage: 380V Open-circuit voltage: 7.3V Secondary current dd/max.: 8/33 kA Electrode force: 750 kp Frequency: 50 Hz Up to 8.8 V At 6 bar Please submit inquiries only by email. Itsdpfx Acsw S Exuousn All information has been provided to the best of our knowledge. Errors excepted. This offer is exclusively aimed at entrepreneurs as defined in § 14 BGB. Sale is made to the exclusion of all warranties. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the keywords "Imprint," "Terms and Conditions," and "Data Protection."

Year of construction: 2018, condition: ready for operation (used), Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible. Isdpfx Acou Izq Souotn

Condition: used, diameter / mm plate thickness / mm current capacity / kVA FRONIUS TransSteel 5000 Syn incl. wire feeder VR 5000 Remote 4R/G/FSC Condition: Very good (functional) Included in delivery: - FRONIUS TransSteel 5000 Syn MIG/MAG welding machine Itodpfxsvx U D Ns Acujn - FRONIUS VR 5000 Remote 4R/G/FSC wire feed unit - Fronius FK 5000 cooling unit - FRONIUS MTW 500i/FSC/4.5m/45°/LED torch Last calibration on 22.01.2024 then no longer used. Next test date 23/03/2024

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN Isdpfxjdx Suhe Acuotn with 2-step switch and auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. This changes the performance data. .

Year of construction: 2012, condition: as good as new (ex-display), Round 50 with MIG/MAG preparation Iodpfxsiby Naj Acuotn consisting of: - Rotary tilting table Turn50 - three-jaw chuck 200mm with centering fixture - Attachment kit quill with manual operation - welding cable 50mm² - Attachment set circular weld 1 (cable set+initiator) - Base frame with mounting kit for torch stand and integrated magnetic stop - Torch stand Fix50/50 1000/500 F/H Stand tube 1000mm extension arm: - Tube spindle unit 500mm - - Burner fine positioning 3x50mm with tube connection piece - Ball joint KG1 Universal torch clamp with indexing - 37/38mm for MIG/MAG automatic welding torches - Control 12 Automation control with integrated control panel - LorchNet connection cable 1m 2 x M12 Connector

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, warranty duration: 6 months, type of cooling: water, overall weight: 4,000 kg, working width: 1,000 mm, Schlatter NQD - Cross seam welding machine - Overhauled We offer here a completely overhauled Schlatter NQD cross seam welding machine. The delivery time of the machine is approx. 4 months. Welding heads: 4 pieces Travel distance: 950mm Welding speed: up to 12 meters / minute The machine is only for sale as reconditioned / as good as new. With kind regards Itedpfju Tqhhjx Acuen T. Becker

Condition: new, Year of construction: 2025, longitudinal and transversal seam welding machine --- Power at 50%: 80kVA Highest welding-current: 35,9kA Itsdjwqmrzjpfx Acuen Electrode force: 100-600daN / double stroke Throat depth: 550mm --- Weld control: Filius classic 128 program --- Extra Equipment: - foot pedal - flow monitor - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Year of construction: 2012, condition: ready for operation (used), The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition. Iedpfx Aepu A D Uscujtn

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: Iodpfx Acsu Nkxhoustn swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min *

Condition: excellent (used), Roller seam welding machine in longitudinal seam design Make DALEX Type PMS 11-4 Nl throat depth: 350 mm Rated power at 50 % duty cycle: 80 kVA Sec. short-circuit current: 23 kA sec. open-circuit voltage: 3.5 - 4.26 V with 2-step switch (high/low range) Electrode force: 80-600 daN with add-on switch cabinet according to VDE 0100 Main switch Synchronous welding control unit 8036 Weight: 635 kg Example photo Itedpfx Aetxl Ivocuen Machine is still being refurbished

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, warranty duration: 6 months, The equipment has been checked by an authorized service center and is ready for operation. We provide a 6-month warranty. The CEA CONVEX 405 Pulse Premium is a high-quality MIG/MAG welding power source equipped with advanced pulse and double-pulse technology. Designed for professional and industrial applications, this Italian-made welder ensures excellent weld quality, easy setup with synergic programs, and maximum versatility. The unit is used but fully tested and in good working condition, ready for immediate operation. ⚙️ Technical Specifications Model: CONVEX 405 Pulse Premium Welding current range: 20 – 400 A Duty cycle (40 °C): 400 A {eta} 60% / 320 A {eta} 100% Power supply: 3~ 400 V, 50/60 Hz Isdoxl Drljpfx Acuotn Welding processes: MIG/MAG, Pulse, Double Pulse, MMA, TIG Lift Control panel: synergic with memory programs and digital display Wire diameters: 0.8 – 1.6 mm (steel, stainless steel, aluminium) Cooling system: air or optional water cooling (depending on configuration) Weight: approx. 120–140 kg ✅ Key Features Pulse & Double Pulse modes – ideal for aluminium and stainless steel. Synergic programs – quick and precise parameter adjustment. Supports multiple processes: MIG/MAG, MMA, TIG Lift. Stable arc and excellent weld appearance even on thin materials. CEA – Italian technology renowned for quality and reliability. Used but checked and ready for work.

Year of construction: 2002, condition: ready for operation (used), Media Power consumption 4 to 10 kW This TWIN SEAM KA 2000-3000 roll bending machine was manufactured in 2002. It handles coils up to 2000 mm wide and 7 tons in weight, producing channels from 140 x 140 mm to 2500 x 2500 mm. Efficient with a power consumption of only 4-10 kW, it offers high capacity production up to 10 tons per 8 hours. Contact us for more information about this machine. Application Types Bending Iedpfxjxd Ic Ss Acuetn

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, We produce the “R-PRO 25” Standing Seam Metal Roof Machine with the highest precision on the latest technology CNC processing machines. With the user-friendly, strong, durable and robust “R-PRO 25” Standing Seam Profiling Machine, you can perform your standing seam applications in a quality-oriented manner. As REIS STANDING SEAM TECHNOLOGIES; we always support our customers with spare parts on stock, from production to assambly, from sales to technical service. MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a R-PRO 25 standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO 25” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 years of warranty Strong management. Loyal, highly trained team. "R-PRO 25" Features - Standard standing seam height 25 mm - Weight: 195 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Cabled remote controller (Standart) - Emergency stop button (Standart) - Forward and backward button (Standart) - Material width adjusment (250 mm – 700 mm) (Standart) - Wheels (Locking feature) (Standart) Itjdehpuhtspfx Acujn - Ribbing Attachments (Optional) - Dijital Encoder (Optional) - Circular Saw (Optional) - Guillotine Shear (Optional) - Sliding Shear (Optional) Please contact us for more information and prices...

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) Iodexfrv Eepfx Acustn 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Ijdpfx Aceuxbx Djustn

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package ➤Fronius intermediate hose package ~1.5m ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Vienna, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? Ijdjwbixrspfx Acustn We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Friction welding machine from MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315 Ijdov Uzf Eepfx Acuotn - Rexroth hydraulics - German user interface - CE Upon request, this machine can also be converted for many other welding tasks.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,000 mm, total length: 1,100 mm, total height: 750 mm, input voltage: 220 V, working width: 600 mm, infeed width: 650 mm, spindle motor power: 1,100 W, warranty duration: 24 months, power: 1.2 kW (1.63 HP), Equipment: CE marking, emergency stop, type plate available, DESTEK MAKİNE is the first and only company to establish a production facility in its field in Türkiye. All machines and hand tools we sell are produced in our own workshops using state-of-the-art CNC machinery from design to final product. With the strength we gain from production, we have been providing products and services to our valued customers in the standing seam roof & facade cladding sector for over 10 years. By conducting a thorough needs analysis with a customer-first approach, we bring all global technological innovations to our country simultaneously. Therefore, our vision can be summarized as: “ Whatever is Manufactured in the World, DESTEK MAKİNE can Produce the Same or Even Better ” With a solution-oriented engineering approach, an experienced team of experts in the field, and a reliable service network, we are here whenever you need us. Our company guarantees 100% customer satisfaction. Our commitment to quality is certified by: CE Conformity Certificate ISO 9001 ISO 14001 ISO 10002 ISO 45001 Every manufactured "DESTEK" standing seam machines goes through delicate tests. "DESTEK" Features Itjdpfx Acswzzlwsuen - Standard standing seam height 25 mm - There is no problem of oil canning when working with the machine. - Automatic Cutting Guillotine (Standart) - Ribbing Attachments (Standart) - Dijital Counter (Standart) - Cabled Remote Controller (Standart) - Emergency Stop Button (Standart) - Forward and backward button (Standart) - Wrench Sets that will be required during use (Standart) - Weight: 260 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Material width adjusment (180 mm – 650 mm) (Standart) Please contact us for more information and prices.

Condition: good (used), 1 MIG/MAG welding machine Manufacturer: Merkle Iedexpf N Tjpfx Acustn Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Design: portable assembly unit Wire feed mechanism: 4-roll drive DV 26 Fuse protection: 16 amps Dimensions: 600 x 300 x 565 mm

Year of construction: 2019, condition: ready for operation (used), Main Drive Itjdpfexpkpfsx Acusn Number of axis 2 This PEMA Column & Boom HD 4x4 Twin SAW was manufactured in 2019. It features a PEMA control panel with touch screen and WeldControl 100 for precise beam welding. The machine includes twin SAW heads, motorized traveling carriages, and a comprehensive wire feeding system. Ideal for longitudinal-shaped workpieces with a working range of 4m vertically and horizontally. Consider the opportunity to buy this PEMA Column & Boom HD 4x4 Twin SAW laser welding machine. Contact us for more information about this machine. Application Types Welding

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, welding current (max.): 280 A, No Warranty. For sale: VLH TR 280 C 280 AMP 400 Volts 21 steps adjustable 2/4 Step Spot welding Steel and Stainless Steel weldable Refurbished, tested, and Serviced Test welding possible Including 3 Meter Mig welding torch, earth work lead with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties. Iodpfxoxmtc Ao Acuetn

Condition: good (used), Year of construction: 2015, 1 used shielding gas welding machine Daihen /OTC M 380-S Year of manufacture 2015 Current range 30-380A Welding power at 100% duty cycle 270A Welding wire 0.8-1.6 mm Wire feed 0.1-22 m/min With 4-roller wire feeder with encoder control Isdpfx Ajxnqnxocuetn

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, welding current (min.): 3 A, welding current (max.): 300 A, For sale: Fronius TransTig 3000 3-300 AMP 380 Volt Water-cooled 2/4 Step Pre gas Post gas Up slope Down slope Start current End current Steel and Stainless Steel weldable Refurbished, serviced, and tested Including 8 meter PRO18 torch, earth work lead, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Isdpfx Acjxmtccouetn All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, welding current (min.): 20 A, welding current (max.): 380 A, For sale ESS E2 4100 20-380 AMP (100% 320A) 400 Volt 50-60HZ Pulse PowerPuls Synergic 2/4 Step 4 Roller drive Pre gas Post gas Start current End current Down slope Bi level Burnbacktime Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, and tested Including 4 Meter PRO4000 welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Iodpfxjxmtb Es Acujtn Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.