Used Manual Crimping Machine for sale (72,508)

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, type of input current: three-phase, Manual Lisec butyl extruder LBH-25V, year 1989, working order. For butyl application of spacer widths from 6-24 mm Ppedpfx Agey T Ipmoksu butyl storage cylinder 2 x 7,5 kg The machine will be available end of May 2026

Condition: like new (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, overall weight: 850 kg, type of input current: three-phase, Manual Lisec 2k sealing machine for Polisulfide, year 1998, will be technically and optically completely overhauled prior delivery (will look and work as new) The overhauled machine will be available from end of May/middle of June and can be seen in our overhaul warehouse in Oroahsza/Hungary. Ppodpsy Tl R Iofx Agkou The machine is now running on PS but can be modified to Silicone on demand as an option. Photos will be available after overhaul has been finished.

Condition: good (used), Year of construction: 1994, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Manual sealing machine Reinhardt Technik Maxi Hydraulik, year 1994, good working order, running on silicone The machine will be available from our stock in Austria by the end of May 2026. Max. material temperature 80° Max. system pressure 300 bar Pedpjy S Tlkjfx Agkjpu Air supply pressure 6 bar

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, throat depth: 2,700 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, overall weight: 2,120 kg, total width: 1,200 mm, total length: 4,500 mm, total height: 2,000 mm, space requirement height: 2,300 mm, space requirement length: 4,800 mm, input voltage: 400 V, Refurbished Pullmax Kumla F13C edge rolling machine in excellent condition for sale. Pedpjy Tni Tjfx Agkepu Can edge roll steel sheets up to 13 mm thick and stainless steel sheets up to 10 mm thick!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 8698, overall weight: 380 kg, Powerful corner crimping machine for processing aluminium profiles with groove sizes from 25–60 mm and profile chamber offset up to 40 mm. The adjustable punching units and infinitely height-adjustable sensors, knives, and stop inserts allow for precise adaptation to a wide range of profile contours. Pedpfxoy Sptko Agkjpu

Condition: used, Year of construction: 2015, functionality: fully functional, sheet thickness (max.): 2 mm, overall weight: 2,600 kg, total length: 1,000 mm, input voltage: 480 V, We offer this used Prinzing BEA2-S riveting and flanging machine, year of manufacture 2015. Type: BEA2-S Material thickness: 1.5 mm Length: 1000 mm Serial number: 1007 Year of manufacture: 2015 Weight: 2600 kg Voltage: 480 V Frequency: 60 Hz Pjdpfxsy Ev Sme Agkopu Power: 19.5 kW Current: 40 A The machine is already disassembled. If you have any questions or need further information, please don't hesitate to send us a message or call us.

Condition: new, Year of construction: 2026, functionality: fully functional, throat depth: 350 mm, roller diameter: 90 mm, Key advantages: clinching technology without rivets – no additional fasteners required, low operating costs, fast and repeatable joining process, intuitive HMI touch screen, compact and robust design, power supply 230 V / 50 Hz, operating pressure 6 bar, easy to use and maintain, perfect for serial and workshop production. Application: ventilation and HVAC, Ppedpfxoy Rrcrj Agksu metal enclosures, home appliances, automotive, control cabinets, sheet metal components manufacturing. Shaft diameter: 90mm, Throat depth: 350mm, Sheet thickness range (mild steel): 2x 0.5-1.2mm, Press force: 76KN, Power supply: 230V Air pressure: 6 BAR Weight: 500kg

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 399, functionality: fully functional, Equipment: documentation/manual, Thibaut multifunction machine for processing natural stone Monoblock design (no foundation required) Spindle speed: 250 - 10,000 rpm Automatic vertical oscillation Podoy Iu Ixopfx Agkopu Vertical motorised fine adjustment of the spindle Tool holder: SK 40 Pneumatic contact pressure 300 mm spindle height adjustment 100 mm pneumatic height adjustment X-axis travel: 3,400 mm Worktable with tilting adjustment Worktable size: 3,000 mm x 970 mm Articulated arm locking system Marble grinding plate (receptacle 3 x Frankfurt type) Includes tools and arbors

Condition: new, Year of construction: 2024, Corner Crimping Machine - Pertici HP 601, year 2024 - BRAND NEW Hydraulic corner crimping machine designed for the processing of aluminium profiles: Its cast iron and steel construction makes it robust and reliable, ensuring consistent crimping quality over time. The crimping heads are controlled by a single mechanical command, guaranteeing perfect synchronization of movements. The machine is equipped with a hydraulic clamping wedge that ensures maximum profile holding during the crimping operation. The easy adjustment of the knife blocks allows quick and efficient profile changeovers. Technical specifications: Pjdey R S Uuepfx Agkspu Maximum crimping force: 3500 Kgp Maximum punching height: 120 mm Nominal pressure: 7 bar Dimensions (L x H x D): 850 x 1250 x 800 mm Weight: 300 kg

Condition: as good as new (ex-display), Manual Coiling comp-ext-tor Spring Machine Pedpfxji Ik H Is Agkepu

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND Bending length: 2020 mm bending capacity: 1,0 mm max. bending angle: 0 - 135 weight: 325 kg option: Rolling shear Cutting capacity of the shear: cutting length: 1600 mm Sheet thickness up to 400N/mm² strength: 0,8 mm Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document Podpfxjpgmq Ue Agkjpu

Condition: used, Fasti 417 Beading and Flanging Machine with motorized drive and hydraulic adjustment of the upper roll Condition: Used Technical data Type 125/3 Capacity: 3.0 mm Roller center distance: 125 mm Throat depth: 500 mm Working depth: 430 mm Drive 2 (standard): 1.5/2.5 kW Drive 3: 3.0 kW Hydraulic drive: 0.75 kW Details Without rolls Without back gauge Gear motor with pole-changing capability V06/12 m/min. Psdoyxdl Ijpfx Agkepu

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) There are fourth types of the manual bending machines MB we make: Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Psdpfev T Uvzox Agkepu Manual bending machine 2650x0.8mm Manual bending machine 3150x0.7mm This manual bending machine bends metal sheets with maximum thickness 0.7mm Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Specifications Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Condition: used, Year of construction: 2010, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard Ppjdpfjy U Tg Hsx Agksu 2-hand operation

Condition: excellent (used), Year of construction: 2017, Year: 2017 - technically efficient, ready to work – after full service - split heads Ppsdpfxey Naz Ts Agkou - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Technical Data: - Bending operation is performed manually, assisted by counterweight Psdoy D Rxrjpfx Agkspu - Clamping of the upper beam via side eccentric lever and foot pedal - Max. working width: 2040 mm - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 250 rpm, spindle speed (max.): 2,500 rpm, total height: 1,600 mm, total width: 1,200 mm, total length: 1,450 mm, lifting speed: 130 mm/s, hone diameter: 50 mm, overall weight: 830 kg, stroke length: 160 mm, power: 0.75 kW (1.02 HP), This easy-to-use manual honing machine is characterized by high stability and precision, and can be adjusted via stepless electronic speed control. The honing diameter ranges from 3mm to 50mm, with lengths up to 160mm. Easy to operate and simple to adjust. Due to its compact footprint, it is highly flexible in terms of placement. Ppedpfsw Upzxex Agkeu

Condition: new, Manual chamfering machine Developed and manufactured in England - Variable spindle speed adjustment - Max. bar diameter 26-105 mm A second cutting head is required for smaller diameters - Adjustable bar support - Max. chamfering/turning length 45 mm - Turning and chamfering tool - Precision three-jaw chuck - Large chip collection container for easy cleaning Podpfxjgi Rnwo Agkopu - Easily moved with a pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE certified OPTION: - Adjustable stop + universal chamfering tool €1,990

Condition: new, Manual chamfering machine Developed and manufactured in England - Variable spindle speed adjustment - Max. bar diameter 80 mm - Adjustable bar support - Max. chamfering/turning length 37 mm - Precision three-jaw chuck - Large chip collection container for easy cleaning - Easily movable with a pallet truck - Weight 500 kg Dimensions L/W/H 800x500x1250 mm 1-year warranty CE certified OPTION: Podpfx Aebwfh Uegkspu - Adjustable stop + universal chamfering tool €1,990

Condition: used, Inverter welding machine for manual arc welding, TECHNOLIT Type PROFImat 170 Plus MMA welding machine, inverter welding machine, manual arc welding inverter New - unused Serial No.: TB1703500316 Article No.: 440030 Year of manufacture: 2022 Output WIG (DC) 170 amps, 45% duty cycle 150 amps, 60% duty cycle 135 amps, 100% duty cycle Output manual arc welding 170 amps, 35% duty cycle 145 amps, 60% duty cycle 125 amps, 100% duty cycle Adjustment range 5-170 amps, continuously adjustable Mains connection 230 volts, 50 Hz - Hot-start function (optimizes ignition behavior, simplifies starting the welding process for electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents possible sticking of the electrode) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Stick electrode welding, suitable for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with a 230-volt Schuko plug Ppedpfx Aei E Iz Iegkju - S-mark for welding under increased electrical hazard - Overvoltage protection Dimensions (device without cable) L x W x H 310 x 155 x 265 mm Weight (without cable) 7 kg NEW - unused, from stock

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current Psdpovg Rh Tsfx Agkspu - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Condition: used, Manual swing bending machine KRAMER, type AMS 650 x 1.5 Manual swing bending machine, press brake Year of manufacture approx. 1985 Ppededzqaajpfx Agkou Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper die opening approx. 60 mm Bending die adjustment approx. 0-25 mm Bending angle 0-180° - Upper die adjustment via hand crank - Pre-setting rail for the bending die - One-piece sharp bending rail, 135° Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg Good condition

Condition: new, Year of construction: 2023, Corner crimping machine FOM INDUSTRIE BAIHA L Ppjdpfx Agsd E Eimjkou Machine in stock - Max. profile height 200 mm - Hydro-pneumatic drive - Three pneumatic clamps - Min/max height of blade position from 0 to 180 mm - Kit for profile support - Digital counters for profile positioning - No. 2 right tool-holder - No. 2 left tool-holder - No. 2 knives 2 mm thickness - No. 4 tools 5 mm thickness - No. 2 fold-away profile fences

Condition: used, functionality: fully functional, machine/vehicle number: D40L/8219, Offer Number: D40L/8219 Machinetype: crimping machine Podpjwi Thasfx Agkjpu Make: WAFIOS Type: K70S Constr. year: wire diameter: 1- 5 mm speed - meter/min: ca. 15 Location: In our warehouse

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: manual, Maximum bending length: 2000 mm Maximum sheet thickness: 1.5 mm Segmented upper bending edge. Manual adjustment of the bending angle up to the stop. Bending: manually operated Manually adjustable rear stop. Podpfxjyr Rcfs Agkepu Weight: 990 kg