Used Manuals for sale (13,403)

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm Fedpfx Agjw Iquysdsft -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, KOMORI LITRONE 40 Machine Year 1996 6 ink units +1 coating unit Max. print format 720 × 1,030 mm Min. format 360 × 520 mm Max speed 10,000 sheets/hr Manual ink keys Voltage 220 Volts Power 53 kW Plate size 800 × 1,030 mm Lifted to 45 cm Feeder height 1,830 mm Delivery height 1,830 mm Dryer extension with two IR cassettes Green system reduces energy consumption, VOC emissions, and noise; RoHS-compliant Complete inking rollers Extra rollers Alcolor: 48mm ID, 68mm OD, 518mm FL Alcolor roller: Dimensions 529–568mm Royse 6 Blankets 902 × 1,041 mm Ffsdpexdd Siofx Agdet

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 663015, Walter Helitronic Mini Power Production 5 Axis CNC Tool & Cutter Grinder Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Mini Power Production, s/n663015, year 2000 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Run with 1 micron filtration system, so the machine is very clean. Specifications: • Longitudinal traverse (X-axis) 350 mm, • Vertical traverse (Y-axis) 200 mm, • Cross traverse (Z-axis) 470 mm, • Rotary table swiveling range (C-axis) +/- 200°, • Work head ISO 50, center height (with / without worktable) 145 / 190 mm, • Max. diameter of workpiece 100 mm • Max. length of workpiece 270 mm • Max. dia. of grinding wheel 150 mm • Peak performance 11,5 kW, grinding spindle motor 9kW,speed 0 - 9500 rpm, • Connected load approx. 25 kW (460 volts 3ph / 60 Hz), • Dimensions w x d x h = 2600 x 2550 x 1970 mm, weight approx. 3950 kg, color grey RAL 7035 / grey RAL 7043. Accessories: • Control HMC 500 Windows XP Upgrade • Booster Box Upgrade option along with a spare Booster Box as well that could be used as a backup or for up to 3 other Walter machines. Value of each booster box is $10,000 a piece. • Stepless speed control, probe, pneumatic workpiece clamping • Fire extinguishing system • Mist Extractor Ffedpfx Agju Ez Huedot • Oil collecting pan, 2 grinding wheel flanges • Complete set of Manuals Software: • Tool Studio Version 2.1 Standard & Steptools • WWM Software Condition: • New Y axis Motor & Ball screw Installed 2021 • New Spindle Installed 2021 • New Electrical cabinet air conditioner Installed 2021 • All new encoder & motor cables for A, C, X, Y & Z axis Installed 2021 • Currently in production producing very accurate & consistent tools. Can be viewed under power • We have all of the shipping bracket, so the machine will be safely secured for shipping. • We can load onto a flatdeck for shipping for $900. We can also provide shipping & crating quotes if you would like.

Condition: new, Table size: 420 x 450 mm Fodpsc Snvfsfx Agdeft Table height: 215 mm Table swivels up to: 45 Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg

Condition: used, machine/vehicle number: YV2A4BAD4XA29xxxx, mileage: 1,244,000 km, Year of construction: 1999, Please contact ATS Norway for more information Please provide reference number upon request: 21144 Specifications – Volvo FH16 (1999): Year: 1999 Mileage: approx. 1,263,000 km EU approved until: 30.11.2026 6x4 Wheelbase: 430 / 138 cm 520 hp Engine brake Suspension: parabolic Manual gearbox Tires (see photos) Ffjdpfx Agsw Ruxzodot Equipment and Condition: Extra wiper heating Front tires are very worn Thermostat replaced Instrument cluster malfunction Fuel gauge not working Central lubrication Liftable axle All belts recently replaced in workshop Valve cover replaced by owner Rear flatbed replaced by owner 400-liter diesel tank Ready for delivery Briab grain trailer (1983): Year: 1983 EU approved until: 19.06.2026 3 axles Length: 1010 cm Air bellows replaced Tipper ABS fault (owner says it’s due to a sensor) Ready for delivery Narko timber trailer (1981): Year: 1981 EU approved until: 30.06.2026 Left rear brake band replaced Faulty sensor Ready for delivery Cranab CRX 10 t/m crane (1993): Certified until July this year New diesel heater Cabin...

Condition: good (used), Year of construction: 2013, TOYODA (JTEKT) GL32M-63 CNC UNIVERSAL CYLINDRICAL GRINDER Equipped with: CBN Grinding Wheel Flagging Steady Rest Workhead Mounted Rotary Dresser Marposs P3SE System Monitoring Toyoda In Process Gaging Marposs E20N Acoustic Controller Air Gap Eliminator Workpiece Collision Control Coolant Pumps W/Magnetic Separator Pendant Control RH Workhead with Center LH Workhead with Center Work Rests Worklight Light Curtains Stacklight Extra Wheels Specifications: -Grind Center to Floor: 1,000 mm -Swing Over Table: 320 mm -Distance Between Centers: 630 mm -Grinding Diameter Range: 10 - 150 mm -Floor Space (Base machine w/auxiliary equipment): 3,400 x 5,000 mm -Net Machine Mass (approx.): 10,500 kg Grinding Wheel: Ffodsrtrzpopfx Agdet -Type: CBN Wheel -Wheel Size (OD): 350 mm -Maximum Wheel Width: 60 mm -Surface Speed: 120 m/s Wheelhead: -Spindle Bearing: TOYODA STAT Bearing -Slide: V and Flat -Feed System: Ballscrew -Rapid Feed (on diameter): 30 m/min -Minimum Incsrement (on diameter): 0.0001 mm Workhead: -Type: Dead Spindle -Work Speed (Max): 500 rpm -Center Taper: MT #4 Footstock: -Type: Hydraulic -Taper Compensation: Manual -Maximum Center Retraction: 60 mm -Center Taper: MT #4 Motors: -Wheel Drive Motor: 15 kW, Belt-Drive -Wheelhead Feed Servomotor: 1.3 kW Tank Capacities: -Wheel Spindle Lubrication Oil: 80 L -Hydraulic/Lubrication Oil: 20 L

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 693068, overall weight: 7,300 kg, power: 30 kW (40.79 HP), Walter Helitronic Vision CNC Tool & Cutter Grinder with Pallet Loader Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Vision, s/n 693068, year 2008 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Can be viewed under power. Specifications: • Longitudinal movement (X-axis) 480 mm • Y axis vertical movement 320 mm • Z-axis transverse movement 700 mm • Rotary table swivel range C-axis +/- 200 ° • Workpiece Holder ISO 50 • Max. Workpiece diameter 320 mm • Workpiece length circumferential grinding 370 mm • Workpiece length for face machining 320 mm Ffedouqzdpjpfx Agdot • Accuracy linear resolution 0.0001 mm • Radial resolution 0.0001 ° • Diameter of the spindle 100 mm • Grinding wheel mount: HSK50 • Diameter of the grinding wheel 200 mm • Grinding spindle speed 0 – 12,000 rpm., • Top performance 30 kW • Connected load 35 kW (460 V / 60 Hz) • Weight approx. 7,100 kg • Dimensions L x W x H 3649 x 2490 x 2301 mm Accessories: • Does not include wheel opening stick fixture seen in the pictures • Stepless speed control, probe, pneumatic workpiece clamping • Electrostatic mist extractor • Fire extinguishing system • Oil collecting pan, 2 grinding wheel flanges, Complete set of Manuals • Turmoil Drive Chiller • Loader Pallets: 8pcs – 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 1-1/4” • 10pcs - HSK Wheel Arbors Software: • Windows XP Pro Svc Pack 3 • Tool Studio V3.3 • The computer was upgraded & is very fast rendering tools in Tool Studio Condition: • Excellent condition, very accurate & consistent. October 2023 Y axis Complete rebuilt, Linear motor, rails, Compensation Cylinder, Festo Booster Pump done by United Grinding. • 1 Micron Filtration system was used on the machine (not included), so it’s been kept extremely clean • We can load onto a flatdeck for shipping for $1200. We can also provide shipping quotes if you would like & crating for Sea Freight shipping.

Condition: used, machine/vehicle number: WDB9061551N51xxxx, mileage: 99,500 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 18275 Specifications: Model year: 2012 163 hp – 4 cylinders Approx. 103,000 km (may increase slightly) Euro 5 Manual transmission 4x2 drive Wheelbase: 433 cm Curb weight: 2460 kg Length: 676 cm Width: 210 cm Tires (see photos) HIAB crane Radio AC/climate control 3 seats Ramps included (see photos) Brand new winch included (see photos) HIAB crane included Delivery by agreement Description:2012 Mercedes Sprinter flatbed truck with only approx. 103,000 km.Includes loading ramps and a brand new, installed winch.Delivery by arrangement. Km: 99500 HK: 190 Technical approved: Yes EU-approved until: 01.09.2026 Own weight: 2460 Total Weight: 5000 Ffedexq Dg Hspfx Agdjt Payload: 2465 Width: 210 Length: 676 Euro: 5 Gearbox: Manual

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Ffsdortrykspfx Agdot Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, machine/vehicle number: WKK6294101300xxxx, mileage: 400,000 km, Year of construction: 2005, Field of application: Freight transport Please contact ATS Norway for more information Please provide reference number upon request: 21574 Specifications: 2005 model EU-approved until 18.05.2026 Approx. 400,000 km 408 hp Summer tires (see pictures) Winter tires (see pictures) 480-liter diesel tank 29 seats, 2 guide seats, and 1 driver seat LED light bar Rear-view camera Toilet Refrigerator Coffee machine Microwave Sink DVD player Includes 2 extra tables Electric sunshades at the front 4 subwoofers (the one in the back is not working) Tool cabinet 2 new alternators included Rust damage at the rear will be repaired before sale Manual transmission AC / climate control Delivery by agreement Description:Setra S411 tourist bus, 2005 model, with 29+2+1 seats and winter tires.The bus has a low mileage of approx. 400,000 km.Additional luggage space can be opened under the bus if needed.There are 4 subwoofers in total – the one at the very back does not work.Two extra tables are included, which can be installed by removing some seats.There is rust damage on the left rear side, but this will be fixed before the sale.Delivery available by arrangement. Km: 400000 HK: 408 Technical approved: Yes EU-approved until: 18.05.2026 Own weight: 13130 Total Weight: 18000 Payload: 4795 Width: 255 Length: 1010 Euro: 3 Ffodpfx Asxp Ar Sogdst Model: S411 turbuss m/ 29+2+1 seter og vinterdekk. Lav km stand! Number of seats: 32

Condition: good (used), Year of construction: 1993, Equipped with: 9" Cutter Head Power Stocks Crowning Auto Loader Heidenhein Scales Variable Feed/Speed Cutter Head RS232 Serial Port Trabon Lube Coolant W/Magnetic Chip Separator AC Servo Motors Full Splash Guards Stack Light Manuals Specifications: Work Gear Pitch Diameter 9" & 12" Cutter Head: 1-12", 1-8" Work Gear Max. O.D. 9" & 12" Cutter Head: 12 1/2", 8 1/2" Diameter Pitch Range: 4-20 Distance Between Centers: 23" Cutter RPM 9" & 12" Cutter Head" 50-500, 50-400 Max. Table Travel Conventional, Tangential, Diagonal: 5", 2" 5"-2" Diagonal Traverse Angle Straight Shaving: 0 Deg. - 90 Deg. Traverse Angle Crown Shaving: 45 Deg. Max. Approx. Max. Table Angle Crowning: 5 Deg. Fjdporuahwofx Agdsft Max. Table Angle Taper: 1 Deg 30' Max. Cutter Head Crossed Axes Angle Left & Right: 25 Deg. Table Cross Feed Inches Per Minute: .5-35 Table Up-Down Feed Inches Per Minute: .004-12.5 Table Up-Down Travel: 8 1/8" Approx. Weight: 9600 lbs

Condition: used, machine/vehicle number: VF3YB2MFB12D0xxxx, mileage: 104,000 km, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 21925 Specifications: Ffodpfx Agsx Am Siedjt 2017 model Approx. 104,000 km Will be EU-inspected before sale 4x4 131 hp Tyres (see photos) New studded winter tyres Summer tyres The 4WD system has been replaced Timing belt has been replaced LED light bar at the front will be removed (it is defective) Side door sensor does not work optimally (affects cargo area lighting) 3 seats Manual transmission AC/climate control Radio/DAB Delivery by agreement Description:2017 Peugeot Boxer 4x4 van with two sets of tyres.Comes with brand new studded winter tyres.The sensor controlling the cargo area light does not work optimally.The vehicle will be EU-approved before sale.Delivery by agreement. Km: 104000 HK: 130 Technical approved: no EU-approved until: 04.10.2025 Own weight: 2040 Total Weight: 3300 Payload: 1185 Width: 205 Length: 541.3 Euro: 6 Model: BOXER

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Fodpfsrtrxiex Agdjft Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, mileage: 158,000 km, Year of construction: 2009, Serial number: VF1FDC1H64049xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21552 Specifications: 2009 model EU-approved until 05.04.2026 Approx. 158,000 km 4x2 120 hp France Élévateur lift basket Tires (see photos) RLE panel Manual transmission 3 seats AC/climate control See video Delivery by agreement Description:2009 Renault Master lift truck with France Élévateur aerial platform.The vehicle is EU-approved until April 2026, but the lift basket is not certified. Delivery by agreement. Km: 158000 Fjdsxq Dgmepfx Agdeft HK: 120 Technical approved: Yes EU-approved until: 05.04.2026 Own weight: 2830 Payload: 595 Model: Master liftbil m/ France Elevateur løftekurv. SE VIDEO

Year of construction: 1978, condition: good (used), U.S. MODEL 50TX120 VERTICAL PULL DOWN BROACH Fodpfx Agsrtrzlsdsft Equipped with: Retriever Puller Hydraulic System Coolant System Chiller Chip Conveyor Manuals Specifications: Normal Broaching Capacity: 100,000 Lbs at 922 PSI Peak Force Capacity: 133,600 Lbs at 1350 PSI Main Slide Stroke (Bump Inches): 106 Maximum Cutting Speed: 20 Ft/Min. Maximum Return Speed: 40 Ft/Min. Main Pump Motor: 75 HP at 900 RPM Hydraulic Reservoir: 365 Gallons Handling Pump Motor: 10 HP at 1200 RPM Coolant Pump Motor: 1.5 HP at 1800 RPM Coolant Pump Capacity: 100 Gallons / Min at 23 Head Ft. Coolant Reservoir Capacity: 600 Gallons Approx. Floor Space ( Width x Depth x Height): 65" x 96" x 243" Net Weight, Approximate: 79,000 #

Condition: used, Year of construction: 2015, Serial number: WDB9642241L93xxxx Please contact ATS Norway for more information Ffedpowwqfxjfx Agdjt Please provide reference number upon request: 20898 Specifications: EU-approved until 27.09.2025 Approx. 388,000 km Automated manual transmission Retarder (leaking – see note below) MCM error (engine control unit) – triggered by retarder issue 3 axles – 6x4 tandem drive Front: new steel suspension / Rear: air suspension Wheelbase: 360 / 135 cm Total length: 806 cm Width: 255 cm Engine: 578 hp – Euro 6 VBG tow hitch Dump box nearly unused – with heating Front snow plow plate Underslung plow blade Rear-view camera Light bar with front work lights Roof beacon light Radio/CD Climate control / AC Sleeper bunk Fridge and microwave All air bellows recently replaced ABS sensor on 3rd axle faulty – new sensor included No LS control on hydraulics New water pump Multiple valves and components replaced – NOK 157,000 in repairs Comes with new summer tires on rims (not pictured) Condition / Notes:The truck is fully plow-equipped with underslung blade and front mounting.It is sold with a retarder leak that causes an MCM engine control error. When triggered, the engine must be restarted.Extensive troubleshooting has already been done, with several new parts replaced.Truck is in running condition and ready for delivery.Video and more pictures available on request. HK: 577 Technical approved: no EU-approved until: 27.09.2025 Own weight: 14400 Total Weight: 28000 Width: 255 Length: 806 Euro: 6 Model: Arocs 2858 6x4 komplett brøyterigget m/underliggende skjær (lekkasje på retarder) Gearbox: Automatic

Year of construction: 2005, condition: used, Mileage: 371.000 km Field of application: Freight transport Serial number: WMAH21ZZ15W05xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21927 Specifications: Model year: 2005 EU-approved until 06.12.2025 Fodpfxex Am Sps Agdoft Mileage: approx. 371,000 km Euro 3 Wheelbase: 450/135 cm 430 hp 2005 Maskoflex 312 body Movable partition wall Full air suspension Engine break Steerable tag axle Remote control Webasto heater in one of the cabinet Tires (see photos) Studded tires on drive axle, regular tires on the rest Owner states approx. 40 m suction hose Owner states approx. 100–120 m flushing hose Manual gearbox AC/climate control Delivery by agreement Description:2005 MAN TGA 26.430 6x2 suction/flushing truck with Maskoflex body.The body is equipped with a movable partition wall.See video. Km: 371000 HK: 429 Technical approved: no EU-approved until: 06.12.2025 Own weight: 18180 Total Weight: 27000 Payload: 8745 Width: 253 Length: 930 Euro: 3 Model: TGA 26.430 6x2 sug-/spylebil m/ Maskoflex påbygg. SE VIDEO. Gearbox: Manual

Condition: used, machine/vehicle number: ZCFA75B020248xxxx, mileage: 401,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20395 Specifications: Km: Approx. 401,000 Transmission: Manual Tires (see pictures) 4x2 Winch Length of plane: Approx. 4.8 m 150 hp Palfinger PK5200 crane from 1991 Crane diagram Ffodpfx Aswi Ryasgdet 3 seats Radio/CD Air conditioning/AC Service is done by owner Ready for delivery Description:Iveco 75E15 crane truck with winch.The truck is EU approved and from 2006.5.2 t/m Palfinger crane from 1991. Km: 401000 HK: 149 Technical approved: Yes EU-approved until: 11.02.2026 Own weight: 5530 Total Weight: 7490 Payload: 1885 Width: 245 Length: 798 Euro: 3 Gearbox: Manual

Condition: used, machine/vehicle number: 224xxxx, Year of construction: 1991, Please contact ATS Norway for more information Please provide reference number upon request: 18312 Specifications: - Not eu approved - 4 axle with loose axle - Missing pictures of axle 4 - Good tires - Air suspension - Manual Extraction 3 metres - Hydr. width of 25 cm on each side Fsdpfx Asvg Awysgdjft - Force on axle 3 - Lift on 2 and 3 - Turn on 1 - Total length 1620 cm - Width 250 cm - Wheelbase 182/182 cm - Hanger is varnished - Rust will occur - Sold with 21 2-er errors and 0 3-er errors - A number of valve faults that have the most points - Ready for delivery Description: 1991 Vang 4 axle well trailer sold as a repair object. It's quite a long patch, but a lot of it is small things. Call for more info. The trailer has an extension of 3 meters and approx. 25 cm hydr. widening on each side says owner. Forced steering on axle 3, lift on 2 and 3. turn on 1. It comes with a loose axle, we lack pictures of it. The trailer is ready for delivery. Technical approved: no EU-approved until: 31.10.2023 Own weight: 10300 Total Weight: 63000 Payload: 52700 Width: 250 Length: 1630 Model: 4 akslet brønnhenger

Condition: used, machine/vehicle number: YS2R6X2000122xxxx, mileage: 600,000 km, Year of construction: 1997, Please contact ATS Norway for more information Please provide reference number upon request: 20740 Specifications: Km: Approx. 600,000, printer has been replaced Manual transmission Suspension: Steel - Air Tires (see pictures) 20T hook w/knuckle Multilift superstructure Trailer hitch Bed Ready for delivery Notes: Ffedpfswvy Itox Agdjt Driveable on the surface, doesn't pull uphill as it should Some costs must be calculated here. Km: 600000 Technical approved: no EU-approved until: 10.06.2022 Own weight: 11500 Total Weight: 29000 Payload: 17425 Width: 250 Length: 820 Euro: 2 Gearbox: Manual

Condition: used, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20763 Specifications: Approx. 2006-2007 model (stated by owner) Total hours: 13,800 (can increase) Chassis (see pictures) Fodpfxowvzraj Agdoft Central grease, some manual points Comes with an extra jaw (recently replaced) Hanging sieve Tape and rolls (see pictures) Main band completely overhauled with new band and side edges Daily operations Video is attached Deutz engine (provided by owner) Ready for delivery Notes: An output psb nd is worn Own weight: 48000 Model: Ca. 2006 Sandvik 1208 Knuser med Sandvik hengesikt. God stand!

Condition: used, machine/vehicle number: YV2A4B3CXTA24xxxx, mileage: 473,000 km, Year of construction: 1996, Please contact ATS Norway for more information Please provide reference number upon request: 21437 Specifications: Km: 473,000 Transmission: Manual Full steel suspension 420 hp Tires (see pictures) Tow hitch VBG Cargo bed (see pictures) Snow plow rigged Bullbar Ffsdpfxsxgm D Te Agdjt Rotating beacon Sign box on roof Light bar Bunk Radio/CD Service and maintenance done by owner Ready for delivery Description:Volvo FH12 tipper truck from 1996.The truck is snow plow rigged and ready for delivery.Snow plow rigged! Km: 473000 HK: 420 Technical approved: Yes EU-approved until: 05.05.2026 Own weight: 11800 Total Weight: 26000 Payload: 14125 Width: 252 Length: 730 Euro: 1 Model: FH12 420 Gearbox: Manual

Condition: used, machine/vehicle number: KS415xxxx, mileage: 48,000 km, Year of construction: 1993, Please contact ATS Norway for more information Please provide reference number upon request: 21743 Specifications: Km: 48,000 4x4 Good tires Bed width: Approx. 132 cm Bed length: Approx. 188 cm Gearbox: Manual Imported (used import) 54 hp Ready for delivery Km: 48000 HK: 54 Technical approved: Yes EU-approved until: 10.10.2026 Own weight: 665 Total Weight: 1200 Payload: 460 Width: 139 Length: 329 Model: ANDRE Gearbox: Manual Fodpfxsxu Azws Agdsft Number of seats: 2

Condition: used, machine/vehicle number: YV2A8A2C24A58xxxx, mileage: 530,000 km, Year of construction: 2004, Please contact ATS Norway for more information Please provide reference number upon request: 20300 Specifications: Km: Approx. 530,000 Transmission: Manual Retarder Tires (see pictures) 6x2 Air suspension 2 years Radio/CD Air conditioning/AC Maintenance is done by owner Ffodpfxswi Rmas Agdot Ready for delivery Description:Volvo FH16 6x2 truck with tipping hydraulics for semitrailer.Ready for delivery. Km: 530000 HK: 610 Technical approved: no EU-approved until: 27.02.2025 Own weight: 9340 Total Weight: 27000 Payload: 17585 Width: 255 Length: 665 Euro: 3 Model: 2004 Volvo FH16 6x2 Trekkvogn m/tipphydraulikk for tippsemi. Gearbox: Manual

Condition: used, Year of construction: 1994, operating hours: 6,070 h, Drive: Wheel Serial number: 3PJ0xxxx Ffsdpfx Ajxd Rdrogdst Please contact ATS Norway for more information Please provide reference number upon request: 21372 Specifications: 1994 model Hours: Approx. 6070, owner believes this is correct Tires (see pictures) Manual quick coupler Digging bucket Grading bucket Blade Service and maintenance done by owner Ready for delivery Description:CAT 212B Wheeled Excavator from 1994.Sold with 2 buckets.Owner says there is a noise when driving in one direction.Ready for delivery. Hours: 6070 Own weight: 1 Model: 212B Hjulgraver m/ 2 skuffer.