Used Masturn 50 for sale (33,434)

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm Rjdezhxi Dspfx Aa Isw table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. Rodpfx Aasmx Sl To Ijw The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 935 mm -Cross-section: 140 x 50 mm Redpfjtvb Egjx Aa Iow -Photo: 510 mm, see photos -Dimensions each: 1040/140/H660 mm Total weight: 156 kg

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, tool presetting device Rjdjpix Nkepfx Aa Ijw -Milling tool holders: Adapter for tool presetting device, 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Submission/Price: complete -Overall dimensions: 500/300/H170 mm -Weight: 34.4 kg

Condition: used, Year of construction: 2020, operating hours: 80 h, 1 WACKER NEUSON RAMMER BS 50-2 vibrating rammer Operating hours: approx. 80h, 1.8 kW Color: as shown in the pictures, according to the images and upon inspection Rodpfx Ajzh Haqea Iow Year of manufacture: 2020 Condition: used

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,936 h, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, overall weight: 14,334 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS VF-10/50 was manufactured in 2022. It features an impressive X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 3048 x 711 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 35.0 in (889 mm) • Spindle nose to table (min): 5.0 in (127 mm) • Spindle • Max torque: 340 ft‑lbf @ 700 rpm (460 Nm @ 700 rpm) • Drive system: 2‑speed gearbox • Bearing lubrication: Air/oil injection Rjdpfezh Hlasx Aa Iew • Cooling: Liquid cooled • Table • Length: 120.0 in (3048 mm) • Width: 28.0 in (711 mm) • T‑slot width: 0.626–0.630 in (15.90–16.00 mm) • T‑slot center distance: 4.92 in (125 mm) • Number of T‑slots: 5 • Max table load (evenly distributed): 4000 lb (1814 kg) • Feedrates • Max cutting feed: 360 ipm (9.1 m/min) • Rapids: X 360 ipm (9.1 m/min), Y 600 ipm (15.2 m/min), Z 600 ipm (15.2 m/min) • Axis motors (max thrust) • X: 3400 lbf (15,124 N) • Y: 4100 lbf (18,238 N) • Z: 5600 lbf (24,910 N) • Tool changer • Type: SMTC • Capacity: 30+1 • Max tool diameter (all pockets full): 4.0 in (102 mm) • Max tool diameter (adjacent pocket empty): 10.0 in (254 mm) • Max tool length (from gage line): 16 in (406 mm) • Max tool weight: 30 lb (13.6 kg) • Tool‑to‑tool (avg): 4.2 s • Chip‑to‑chip (avg): 6.3 s • General • Coolant capacity: 95 gal (360 L) • Air requirements • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Electrical • Drive system: 2‑speed gearbox • Input AC voltage (3‑phase) low: 220 VAC, 70 A (FLA) • Input AC voltage (3‑phase) high: 440 VAC, 35 A (FLA) • Dimensions – shipping • Domestic pallet: 288 in x 102 in x 132 in (732 cm x 260 cm x 336 cm) • Export crate: 288 in x 105 in x 134 in (732 cm x 267 cm x 339 cm) • Domestic pallet with EC option: 288 in x 102 in x 140 in (732 cm x 260 cm x 356 cm) • Export crate with EC option: 288 in x 105 in x 141 in (732 cm x 267 cm x 359 cm)

Condition: excellent (used), Prism Pharma Maxhinery ribbon blender. Vacuum option. Lovely condition. Direct from test facility. Rodpfxsx Axbco Aa Ijw

Condition: like new (used), Nilma salad spinner in as new condition. 5-8 kg per cycle with a 1-2 minute cycle time Rjdpey Hqanjfx Aa Ijw

Condition: as good as new (ex-display), Year of construction: 2018, Shrink tunnel Manufacturer: Diez Type: HTC 110 50 D Year of manufacture: 2018 Rodezh Nw Sepfx Aa Iew Belt width: 110 cm Length: 255 cm Clearance height: 47 cm New No operating hours 2726

Condition: used, Year of construction: 1990, operating hours: 83,000 h, functionality: fully functional, BRUDERER BSTA 50HL (500 kN, year 1990, Kom. 9443) Technical Specifications Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model: BSTA 50 HL Serial / Commission No.: Kom. 9443 Year of Manufacture: 1990 Operating Hours: 82,600.0 h (as shown on press control) Total Weight approx.: 8,700 kg Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Bolster plate — Width × Depth: 930 × 650 mm Rodey S E U Repfx Aa Ijw Baseplate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip pass-through width: 250 mm Feeding device: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 400 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Original technical documentation and schematics

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 540 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information. • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline Control with multi-touch screen Rodjyfv Tvepfx Aa Ijw • Processes: Laser fine cutting, laser drilling, laser welding • Work capacity: Machining diamond tools up to Ø 355 mm and 420 mm in length • Axes/table: NC swivel rotary table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W pulse peak power and 450 W average power • Processing head: 80 mm focal length; collision switch • Vision: Camera through beam path for fiber laser • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/usage: ~100 working hours (as new) • Notes: CNC precision laser machine with high-speed processing; highly dynamic and precise Additional equipment • Fanuc robot automation • Keller automatic extraction system • Basement exhaust extraction system

Condition: used, Year of construction: 1996, Manufacturer : Marchesini Model: MS 235 / AS 237 / BA 50 Year : 1996 Type : 4-seal pouch packaging line for powders. 1. Bagging machine Vertical automatic machine with intermittent movement for filling and sealing bags, for medium and high speed production lines, for powders. Volumetric shaving filler Mechanical speed: 100 strokes/min Range of formats : max reel outer diameter: 400 mm (800 mm with reel) max reel width: 800 mm (820 mm with waste) bag length: 60 to 120 mm Reel support trolley Hopper handling trolley Weight: 2100 kg 2. sachet counting unit 3. Cartoning machine Capacity : 70 cartons / minute Dimension A = 40 - 145 mm Size B = 20 - 80 mm Size H = 70 - 190 mm A+B = 190 mm Weight: 900 kg Rjdpfxjzg I Ugj Aa Iow

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: Rodpfxozg Ty Ue Aa Iow e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: good (used), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical specifications of the climate chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Dimensions: Test space volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Redpfozg Txqsx Aa Iew For further questions, we are happy to assist you by phone.

Condition: good (used), LDS + Andreas Schmid Type: LDS Shaker V721 + TK 8000/-50/120 -55 to +140°C Shaker: Exciter: 4x LDS V721, air-cooled Amplifier: PA 1000L Controller: imv K2 MIMO (Multi Input Multi Output) Software: imv K2 Excitation types: Sine / Random / Shock / Real-time profiles Force vector per shaker: 2.9 kN (peak sine) / 1.9 kN (RMS random) / 4.6 kN (peak shock) Maximum payload: 100 kg per shaker Acceleration: max. 44 g RMS / 66 g peak Velocity: max. 0.7 m/s Displacement amplitude: max. 25.4 mm p-p (1 inch) Frequency range: 5...4000 Hz Mounting area for test specimens: 1000 x 1000 mm aluminum profile frame Special features: The four shakers can be operated synchronously or asynchronously with the MIMO controller. An aluminum profile frame enables a mounting area of 1x1 m² for large test specimens. Without the profile frame, it can be used as a mobile modal shaker for large test specimens, such as complete vehicles. The lightweight vibrating elements of the shakers enable excitation frequencies up to 4000 Hz. Weight: 2000 kg Climate chamber: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: TK 8.000/-50/120 / Monoblock, welded Dimensions (mm): Width Depth Height Test chamber: 2,000 2,000 2,000 (8 m³) External dimensions without base frame: 2,340 3,600 2,800 External dimensions with base frame: 2,340 3,600 3,800 External dimensions of unit: 1,200 2,400 2,200 Door: 2,000 2,000 2 test chamber windows in the door: 460 460 Weight: 4,500 kg Insulation: 140 mm PU, CFC-free, B1 according to DIN 4102 Outer cladding: Steel sheet 0.6 mm, painted according to RAK 7035 Temperature range: -55 °C to +140 °C Temperature stability: ± 0.5 K over time Climate range: +10 °C to +95 °C Humidity range: 10% to 95% RH Redpfjzg Tv Nsx Aa Iow Refrigerant R404A 29 kg Total weight: 6500 kg Condition: used Scope of supply: (See picture) Example pictures! Current pictures will follow! (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, empty load weight: 3,180 kg, maximum load weight: 6,820 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 08/2011, loading space length: 5,070 mm, loading space width: 2,420 mm, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 3-sided tipper, 500 mm drop sides, 4 x 3 t lashing eyes, loading height approx. 950 mm, , Surcharge for aluminum ramps, Price: 600 Euro, , Vehicle is sold on behalf of the customer , , -- Misprints, errors and modifications excepted, sample pictures --, More data under: !, More Details: ! Rsdpezhr I Tjfx Aa Iew

Condition: used, Year of construction: 2019, load capacity: 5,000 kg, lifting height: 6,670 mm, total length: 5,250 mm, - Bedienung Sitz - Tragfähigkeit 5,0to - Lastabstand 535 mm - Achslast vorn mit Last 11547 kg - Achslast hinten mit Last 1154 kg - Achslast vorn ohne Last 3845 kg - Achslast hinten ohne Last 3866 kg - Bereifung SE - Räder, Anzahl vorn (x = angetrieben) 2x - Räder, Anzahl hinten (x = angetrieben) 2 - Spur vorn mm 1104 - Spur hinten mm 920 - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 6 - Kupplungshöhe mm 546/421 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4284 - Arbeitsgangbreite bei Palette 800 x 1200 längs - Wenderadius 2549 mm - Kleinster Drehpunkt 638 mm - Fahrgeschwindigkeit mit Last km/h 18 - Fahrgeschwindigkeit ohne Last km/h 19 - Hubgeschwindigkeit mit Last m/s 0,31 - Hubgeschwindigkeit ohne Last m/s 0,44 - Senkgeschwindigkeit mit Last m/s 0,55 - Senkgeschwindigkeit ohne Last m/s 0,46 - Zugkraft mit Last N 3600 - Zugkraft ohne Last N 4400 - Max. Zugkraft mit Last N 15670 - Max. Zugkraft ohne Last N 16090 Rsdezhxzgopfx Aa Iow - Beschleunigungszeit mit Last s 5,4 - Beschleunigungszeit ohne Last s 4,7 - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Batteriespannung V 80 - Energieverbrauch 60 VDI-Arbeitsspiele/Stunde kWh/h 12,1 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30 - Schallpegel, Fahrerohr dB (A)

Condition: used, Year of construction: 2013, x-travel 500 mm y-travel 450 mm z-travel 400 mm Rsdpfxozhchqj Aa Isw total power requirement --- kW weight of the machine ca. 4,5 t dimensions of the machine ca. --- m

Condition: good (used), Year of construction: 2002, functionality: fully functional, Clamping force: 500 kN Platen size: 540 x 540 mm Tool opening stroke: 350 mm Minimum tool mounting height: 200 mm Screw diameter: 30 mm Injection pressure: 2025 bar Displacement volume: 74 cm³ Opening width: 500 mm Ejector stroke: 100 mm Rsdpszg T I Sofx Aa Iow Total weight: approx. 2,300 kg

Condition: used, Year of construction: 1993, Location: Malta Presona LP 50 VH Hydraulic Baler Presona LP 50 VH fully automatic horizontal hydraulic baler available for sale. The machine includes a hydraulic power unit, an automatic wire tying system, PLC controls, a pre-press and main press assembly. Suitable for OCC, paper, plastics, and industrial recyclables. Conveyor system not included. Sale Includes: Presona LP 50 VH horizontal baler Hydraulic unit Main press system Pre-press system Friction channel Automatic wire tying system Needle assembly PLC control system Hydraulic power pack Electrical control cabinet Bale ejection system Not Included: Conveyor system Machine Overview Main Technical Specifications Specification Details Manufacturer: Presona AB Model: LP 50 VH Machine Type: Fully Automatic Horizontal Hydraulic Baler Maximum Hydraulic Pressure: 25 MPa Press Force: 500 kN Power Supply: 220–600V AC, 3 Phase Control Voltage: 24V DC PLC Bale Weight: Up to approx. 800 kg Strapping: Automatic Multi-Wire Tying Operation: Continuous Automatic Operation Materials Suitable for Baling: OCC / cardboard, Waste paper, Newspapers & magazines, Plastics, Packaging waste, General recyclable materials Main Features: Hydraulic Pressing System Heavy-duty hydraulic main press Hydraulic pre-press system Adjustable friction channel pressure Continuous compaction operation Automatic Wire Tying Fully automatic multi-wire tying Hydraulic needle assembly Wire twisting and cutting system PLC Controlled Automatic operating cycles Error monitoring system Programmable material settings One-man operation capability Hydraulic Unit: The hydraulic system includes: Hydraulic pumps Oil tank Pressure regulation valves Oil filters Pressure transmitter Oil temperature monitoring Optional systems mentioned in the manual: Oil cooler Oil pre-heater Remote display Automatic Bale Tying System: The LP 50 VH features: Hydraulic needle assembly Automatic wire feeding Automatic twisting and cutting Rsdpszhpa Tefx Aa Ijw Multi-wire bale securing system Ideal Applications: Recycling facilities Waste transfer stations Cardboard recycling operations Plastic recycling plants Industrial waste processing Distribution & logistics centres Storage location: Customer

Condition: used, Year of construction: 1992, operating hours: 4,296 h, lifting height: 3,910 mm, fuel type: diesel, mast type: duplex, fork length: 1,170 mm, fork width: 1,700 mm, total height: 3,910 mm, total length: 3,630 mm, total width: 1,740 mm, color: yellow, Empty weight: 7.700 kg Lifting capacity: 5.000 kg - Year: 1992 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 74611023X8 - Operating hours: 4296 - Lifting capacity: 5000kg - Lifting height: 3910mm - Overhead clearance: 2760mm - Fork length: 1170mm - Maximum fork width: 1700mm - Minimum fork width: 330mm - Number of wheels: 4 Wheels - Attachment: Side-shift, 4th valve to fork carriage - Options: Work lights, Joystick, Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: Yale - Transport dimensions: 3630mm x 1740mm x 3910mm (l x w x h) - Transport weight [kg]: 7700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Redpjzgcyqefx Aa Isw Tess van den Boom

Condition: used, Year of construction: 1996, pressure 0050 t chamfer lenght 1270 mm distance between columns 1040 mm stroke 215 mm throat 410 mm dayligth 385 mm back stop - adjustable 860 mm Rsdpfxey Hxmis Aa Iew working feed 1 - 10 mm/sec return speed 135 mm/sec total power requirement 8,6 kVA weight of the machine ca. 4750 kg dimensions of the machine ca. 2000 x 2100 x 2400 mm - controlled axes: Y1, Y2, X, R - Pneumatic die shift - hydraulic WILA/TRUMPF upper tool clamp - hydraulic WILA/TRUMPF lower tool clamp - LAN network connection - 4 stop fingers manually adjustable, foldable to the rear, pneumatic clampable - CNC control, operation on the front left - 2-hand operation / foot switch - rear + side protection

Condition: used, machine/vehicle number: 516329J00165, Year of construction: 2018, Output: 15.0 kW, lifting capacity: 5,000 kg, unladen weight: 5,398 kg, duplex mast, side shift, partial cabin, STILL afx 30V/140A battery charger, recorded operating hours: 3,461 hours. Rsdpjy U R Rvsfx Aa Iew

Condition: good (used), Centrifugal pump, water pump, domestic water pump, garden pump, high-pressure centrifugal pump -Manufacturer: WILO, High-pressure centrifugal pump type Helix V1008-1/16/E/KS/400-50 -Power: 3 kW -Flow rate: l/h -p max: 16 bar -Number: 2x pumps available -Price: per piece -Dimensions: 250/240/H950 mm Rsdpfjwyaryex Aa Isw -Weight: 47 kg/unit

Year of construction: 2022, condition: good (used), Railcar, platform wagon, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer Rsdeytt Nqspfx Aa Iow -Manufacturer: Plan, railcar with 48-volt drive and battery -Type: EGB 50 -Platform: 4640 x 2000 mm -Load capacity: 50,000 kg -Drive: with 48-volt electric geared motor -Track width: mm -Wheel arch width: mm -Dimensions: 2000/4640/H770 mm -Empty weight: 4140 kg