Used Material Feed for sale (24,195)

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Dusdjw Svtcjpfx Abhsp Type: LZ 185 Swing diameter over bed: 365 mm, over cross slide: 225 mm Turning length: 750 mm Centre height: 185 mm Spindle bore: 40 mm Spindle flange: KK5 (DIN 55022) Spindle taper: MT5 Speed range: 20 – 1,600 rpm Digital readout: Heidenhain VRZ 773 B on 2 axes (scales on compound and longitudinal slides) Dimensions: 1,900 x 900 x 1,700 mm Features: - Spindle brake with foot pedal - Adjustable stop on compound slide (disengages feed) - Splash guard Accessories: - Operating manual - Multifix B tool holder with 2 inserts - Coolant pump integrated in machine base (no coolant hose connected) - Röhm 3-jaw chuck 200 mm with hard and soft jaws Weight: approx. 950 kg Condition: Used The machine runs smoothly and can be inspected under power. All information is supplied without guarantee. Subject to errors and prior sale; all dimensions are approximate. Offer is non-binding. The machine can be inspected by appointment. Specifications, information and prices are subject to change and prior sale! All prices are net plus VAT. Payment in advance within 14 days of contract conclusion, including any applicable freight costs. In case of incomplete payment within this period, the seller reserves the right to cancel the purchase contract. Sale is only to businesses as defined by § 14 BGB. The machine is sold excluding liability for material defects. This exclusion does not apply to claims for damages based on grossly negligent or intentional breach of obligations by the seller or his agents, or in case of injury to life, body, or health. Any remaining claims against third parties for material defects will be assigned to the buyer. Please understand that compliance with any applicable safety regulations for the sold machine and its components is the responsibility of the end user. No liability is assumed by us for such compliance. German law exclusively applies to all our contracts, to the exclusion of the United Nations Convention on Contracts for the International Sale of Goods (CISG). Place of jurisdiction is agreed to be Mannheim.

Condition: new, Year of construction: 2026, Compact Material Lift 5 m / 300 kg – A Versatile Tool for Handling and Installation Tasks Key Advantages of the Lift Load capacity up to 300 kg – safe lifting of boxes, equipment, pallets, and assembly components. Lifting height of 5 meters – ideal for working at various levels, including ceiling installation tasks. Three-section mast – smooth extension of top, middle, and bottom sections for maximum working height. Self-adjusting and all-terrain wheels – easy transport over uneven surfaces, thresholds, and stairs. Winch system with self-locking brake – ensures the load remains safely at the desired height. Mast lock – prevents accidental lowering in case of a lifting mechanism failure. Stabilizing outriggers – guarantee structural rigidity when operating under full load. Construction and Technology The device is designed for intensive use and ergonomic operation. The three-section mast with a telescopic system allows for compact transport dimensions while reaching the full working height of 5 meters. The mast sections extend smoothly and safely, and the integrated locking mechanisms ensure full control of the load during every stage of operation. Djdpfx Abew U Scfjhjup Durable forks provide stable support for various types of loads. Their construction ensures even weight distribution, which is especially important when working with installation devices or construction materials. Large-diameter wheels and self-adjusting travel components allow the lift to move efficiently over rough terrain and in narrow working spaces. Work Safety The lift is equipped with a range of safety features, including: Self-locking brakes in the winch mechanism – protect against sudden dropping of the load. Mast lock – increases safety during stationary use and static work. Side outriggers – eliminate the risk of tipping over under heavy load. Applications This compact material lift is a universal tool suitable for many industries: Construction and technical installations – installation of air conditioners, fans, ducts, and structures at height. Warehousing and logistics – stacking goods on racks, loading and unloading delivery vehicles. Retail and exhibition setups – mounting displays, banners, advertisements, or store lighting. Industrial manufacturing – handling components and equipment during assembly of production lines. Standard Equipment Three-section mast with safety lock Heavy-duty forks Winch system with self-locking brake Two stabilizing outriggers All-terrain and self-adjusting wheels Material Lift Specifications: Parameter Value Lifting height 5000 mm Fork length 690 mm Folded height 2000 mm Length (folded/unfolded) 740 / 1880 mm Width (with stabilizers extended) 800 / 1850 mm Ground clearance 50 mm Minimum fork height 150 mm Weight 145 kg Maximum load capacity 300 kg Capacity based on center of gravity: – up to 60 cm 300 kg – up to 80 cm 250 kg – up to 100 cm 150 kg

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Duedjxnpx Nopfx Abhsp

Condition: new, Year of construction: 2021, machine/vehicle number: 0-250-87-1000, functionality: fully functional, Equipment: CE marking, NEW THROUGHFEED DRILLING MACHINE DRILLTEQ V-200 (BHX 055) Standard features •Drilling head with 13 spindles •Horizontal drilling head with 4 spindles in X-direction •Horizontal drilling head with 2 spindles in Y-direction •Grooving saw D=100 mm (X-direction) •Stop cylinder for workpiece positioning •Workpiece clamping system •Workpiece length: 3050 mm •Workpiece thickness: 12-60 mm Machine operation •WOODWOP 7 FOR MACHINE •Milling motor with frequency inverter 5kW (ETP) Dusdpfjw U Ty Sex Abhop Documentation •Selected language: Polish, English, German •Documentation on data carrier, paper documentation General information •Year of manufacture: 2021 •Control: POWERCONTROL with POWERTOUCH system •CE-marked •Status: Ready for operation / can be demonstrated •Available in stock

Condition: used, fuel type: diesel, color: green, Year of construction: 2015, operating hours: 11,445 h, Year of manufacture: 2015 Model year: 2015 Field of application: Construction Empty weight: 32.000 kg General condition: average Technical condition: good Visual appearance: average Price: On request Please contact Ferdinand Pater for more information Stock no. D15 Machine Brand Sennebogen Type: 830M D-series Weight: 34 Ton Serial number: 830.0.2170 Building year: 2015 Worked hours: 11.445 Djdet Dlwyspfx Abhjup Engine: Cummins QSB 6.7 Boom: K15 configuration, Safety check valves on boom and stick cylinders Cabin: "Maxcab, Hydraulic Cab Riser, 2,7 m. in height Gantry catwalk on cabin " Upper carriage: Standard Sennebogen color, Central greasing system Lights: Several (LED) lights on boom, stick and cabin Extra: Machine is serviced and clean, ready for work

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Dedox Up Igepfx Abheup Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Electronic direct injection / common rail Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera LED lighting package (equipment) LED lighting package (cabin) Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Dedpfx Abeyh A Iishjup Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Condition: excellent (used), Simodrive feed model Make Siemens Dodpofhkt Refx Abheup Type 6 SC 6116 OAAOO G 600 D 490 / 49 M6 REQ Output current 60/120 A Space requirement :D. 290 x W.150 x H.480 mm Weight 13 kg

Condition: used, mileage: 545,368 km, power: 355 kW (482.67 HP), first registration: 06/2022, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2026, brakes: retarder, color: white, gearing type: automatic, Equipment: air conditioning, electronic stability program (ESP), parking heater, soot filter, Model Year * Model Year: 2022 Transmission * Automatic transmission, 12+2 gears Assistance Systems * Electronic Braking System (EBS) * Adaptive Cruise Control (ACC) Lighting & Visibility * Daytime running lights Audio & Communication * Radio * Information and service system Exterior * Leaf/air suspension * Fifth wheel coupling * Low-noise * Alloy wheels * Electrically adjustable exterior mirrors * Speed limiter * Wide tyres: 385 front axle Duodpfeyiwtxjx Abhop * Storage box Safety * Retarder * Electronic Stability Program (ESP) * Outside temperature display * Wide-angle mirrors * Immobiliser Interior * Fabric seats * Tachograph * Leather steering wheel * On-board computer * Sun visor * Cool box Comfort * Air conditioning * Auxiliary heater (parking heater) * Comfort seats * Air-suspended driver's seat * Heated seats * Lumbar support * Electric windows * Central locking Tyre Sizes * 1st axle: 385/65 R22.5 * 2nd axle: 315/70 R22.5 Other Dimensions & Weights * Payload: 12,984 kg * Permissible gross weight: 20,500 kg * Fuel tank capacity: 310 l * Wheelbase: 3,800 mm ----Tyres: 385/65R22.5 9 mm front axle; 315/80R22.5 6-10 mm rear axle Errors and changes reserved.

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank Duodpfeua Nngjx Abhep - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Condition: excellent (used), Bandsaw with feed MEBER SR - after the technical review - in good condition - Italian production Dodjfwl Uaepfx Abheup TECHNICAL PARAMETERS: 4 kW main engine wheel diameter 800 mm cutting height 420 mm maximum width of the cut material 780 mm cutting width at the ruler of 575 mm cutting width with rolls 195 mm maximum width of the material cut with a feed 355 mm cutting band width max 40 mm feed speed adjustable on the inverter feed speed range 0-12.5 m / min height of the feed roller 140 mm pneumatic feed pressure upper and lower belt guides 0.75 kW feed motor stub diameter 100 mm dimensions (length / width / height) 260 x 165 x 115 cm weight 700 kg

Condition: used, mileage: 545,368 km, power: 355 kW (482.67 HP), first registration: 06/2022, fuel type: diesel, empty load weight: 7,516 kg, maximum load weight: 12,984 kg, overall weight: 20,500 kg, axle configuration: 4x2, wheelbase: 3,800 mm, next inspection (TÜV): 06/2026, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, number of seats: 2, Equipment: air conditioning, cruise control, low noise, onboard computer, parking heater, Unladen weight: 7516 kg, permissible total weight: 20,500 kg. 1st axle: 385/65 R22.5, 2nd axle: 315/70 R22.5. Fabric seats, grey interior, leaf/air suspension, retarder, tachograph, fifth wheel coupling, electronic braking system (EBS), electronic stability program (ESP), adaptive cruise control (ACC), comfort seats, air-suspended driver’s seat, seat heating, radio, leather steering wheel, lumbar support, alloy wheels, electric windows, outside temperature display, electrically adjustable exterior mirrors, wide-angle mirror, immobilizer, central locking, sun visor, refrigerator, daytime running lights, information and service system, speed limiter, wide tires: 385 front axle, storage box. Tyres: 385/65R22.5 9mm front axle, 315/80R22.5 6-10mm rear axle. Subject to errors and changes. Duedpfx Ajyixudebhjp

Condition: used, Year of construction: 2001, material width 400 mm material thickness 0,5 - 4,0 mm material cross-cut 1200 mm² Dodsvzxqlspfx Abheup roll diameter 80 mm feed length - 9999,9 mm speed - 90 m/min weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 1,0 x 1,2 mxmxm servo roll feed

Condition: ready for operation (used), Year of construction: 2012, Load capacity: 5600kg, loading volume: 12m³/12000l, top speed: 25km/h, number of augers: 1, tire size: 315/60 R22.5, tire tread depth: 10mm, weighing system: scales, feed discharge: front left, corrosion: visible. Documentation available. On-site inspection is possible. Djdpfx Aeuantujbhsup

Condition: used, mileage: 96,317 km, power: 338 kW (459.55 HP), first registration: 11/2023, fuel type: diesel, empty load weight: 8,027 kg, maximum load weight: 9,973 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Year of construction: 2023, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, onboard computer, parking heater, traction control, Color: White, unladen weight: 8,027 kg, gross vehicle weight: 18,000 kg, 1st axle: 315/60 R22.5, 2nd axle: 295/60 R22.5, air suspension, retarder, digital tachograph, fifth wheel: +GF+ SK-S36.20 2/128, -510 mm, electronic braking system (EBS), electronic stability program (ESP), traction control (ASR), automatic climate control, stationary air conditioning, adaptive cruise control (ACC), air-sprung driver's seat, seat heating, ride height control, LED headlights, automatic driving lights, headlight range adjustment, radio, Bluetooth hands-free kit, Scania lane departure warning system, rain sensor, adjustable steering column, electric windows, roof hatch, outside temperature display, roof spoiler, fog lights, electrically adjustable and heated exterior mirrors, heated kerbside mirror, wide-angle mirror, immobilizer, central locking, tinted windows, wind deflector, sun visor, refrigerator, axle load display, hill-start assist, LED daytime running lights, 1x 15-pin connector, coasting function, telematics system, speed limiter, side paneling, upper and lower bed, EGR, SCR, former rental vehicle, non-binding offer, errors and prior sale reserved. Image may not reflect offer. Offer no. UVB250291. Dedpfeyiglhox Abhoup

Year of construction: 1998, condition: good (used), Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... -Type:PMA-U -Drive: 0.75 kW -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm Duedpfxsx Td Ilj Abhsp -Weight: 878 kg

Condition: used, Year of construction: 2008, operating hours: 15,498 h, 2008 | Sennebogen 850R with hydraulic rotating grapple | Used Material Handling Excavator | 15498 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 165000 or Make an Offer. Dujdpfx Ajx Ti T Hsbhep Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 47 approved ✅ 9 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Machine is operational with normal wear for 15,000 hours, some minor oil leaks. Turret brake needs inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32948 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Dusdpfx Abex U Eiaohop Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Year of construction: 2003, condition: ready for operation (used), Number of pallets: 15, max. sheet format: 3000x1500mm, length: 9830mm, height: 6155mm, weight: 12t. Dsdpfx Abehvvmioheup

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Duedei El Ucjpfx Abhep

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) Duodpfelil Ewox Abhop yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Year of construction: 1988, condition: used, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm Dedobicz Hepfx Abhjup strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 82-15796, input voltage: 400 V, total length: 30,000 mm, total width: 4,000 mm, type of input current: three-phase, plate width: 2,100 mm, plate length: 1,600 mm, Equipment: documentation/manual, See description for all information Dujdpeygm Hpofx Abhop Fully equipped SAM-X 2-colour machine including feeder, UV dryers, and stacker Year of manufacture: 2001 Full information and documentation can be found in the attachments.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Dsdpfx Aox A U Ncobhjup Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, mileage: 717,000 km, power: 290 kW (394.29 HP), first registration: 12/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Mercedes Actros 1840 4x2 tractor unit * Euro 6c * Long-distance cab with 1 bed * ACC adaptive cruise control * Lane assist * Blind spot assistant * Differential lock Duodpfxsyg T T Ae Abhjp * Leaf-air suspension * Automatic climate control * Auxiliary (parking) heater * Heated seats * PTO (power take-off) * Radio/CD * Navigation system * Xenon headlights * Alcoa alloy wheels * Electric windows * 1st owner * ADR FL/AT (hazardous goods certified) * Unladen weight 6,750 kg * Multiple units available