Used Mebus Grinding Machine for sale (83,886)

Condition: good (used), Year of construction: 1976, operating hours: 9,999 h, functionality: fully functional, machine/vehicle number: 46244066, Technical Data for Technica AG / TECHNICA Type 5100 (also ZSM 5100 / AG 5100) Center / Center Hole / Universal Grinding Machine Pedsxda Duopfx Agzsha Technical Data – TECHNICA / ZSM 5100 Max. workpiece diameter approx. 125 mm Min. workpiece diameter approx. 8 mm Max. workpiece length / center distance approx. 1,100 mm Models up to 2,000 mm Minimum workpiece length 50 mm Maximum workpiece weight approx. 120 kg Certain versions up to 250 kg Center hole diameter approx. 2-50 mm Taper angle of center hole approx. 60° Grinding wheel speeds depending on wheel diameter approx.: Ø 15 mm: 45,000 rpm Ø 27 mm: 22,500 rpm Ø 48 mm: 13,000 rpm Machine weight approx. 460 kg

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm Podpfew Ed S Uex Agzeha - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Phedsvvkipjpfx Agzea

Condition: good (used), Grinding machine, angle grinder, lathe tool grinding machine, thread drill grinding machine, milling cutter grinding machine -Angle adjustment -grinding device -Disc: Ø 190 mm -Drive: 0.2 kW -Speed: 2800 rpm Podpfob A Nihex Agzeha -Dimensions: 700/700/H1400 mm -Weight: 275 kg

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Podpfx Aox Ik Tkegzeha There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: new, Year of construction: 2022, width of the strips 75 mm band length 2000 mm band speed 36 m/min Pjdpfx Agox H Aliozjha total power requirement 4 kW weight of the machine ca. 82 kg dimensions of the machine ca. 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tiltable sanding unit - Fold-away protective screen

Condition: excellent (used), Year of construction: 1980, Grinding length: 600 mm Grinding width: 200 mm Clamping area of table: 600 x 200 mm Maximum distance between table and grinding spindle center: 500 mm Grinding wheel dimensions: 250 x 25 x 51 mm Phjdpfx Asx Ir I Asgzsa Table longitudinal feed hydraulically steplessly adjustable: 1 - 24 m/min Table cross feed per handwheel revolution: 4 mm Grinding spindle speed steplessly adjustable via DC drive: 800 - 4200 rpm DC drive: 1.5 - 5.0 kW Net weight with control cabinet approx.: 2000 kg Space requirement approx.: 3100 x 1700 x 1900 mm

Condition: used, Year of construction: 2008, tip circle diameter 650/800 mm workpiece length - max. 1100 mm Pjdpfjw Rrbyex Agzjha max. module 20 (25) mm min. module 0,5 mm control Siemens Sinumerik 840 D total connected load 62 kVA helical angle -45 / + 120 ° weight of the machine ca. 10 t

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Phjdpfewhqprsx Agzja

Condition: used, functionality: fully functional, • Manufacturer: COLLMANN GmbH & Co. Spezialmaschinenbau KG • Manufacturer address (as indicated on the nameplate): Phodpfx Agex Iulkszea Lübeck, Moislinger Allee 222–224, Germany Identification • Machine number: 232521 • Type: Special grinding machine

Condition: used, Year of construction: 2012, workpiece . workpiece diameter 15 -70 mm swing diameter max. 150 mm clamping length max. 500 mm Swing over bezel area 70 mm dimension 150 x 300 mm max. turning speeds 250 min/-1 longitudinal adjustment manuell über Kettenrad Fixed tip MK 4 (Junker D75 mm) clamping capacity ü. Hydraulik einstellbar travel -z axis max. 1000 mm feed z - Achse (CNC gesteuert) dimension D 205 x 450 mm flange diameter D 190 mm standards association D 127 mm Phodsx H Andjpfx Agzja drive 30 kW speed control mit Frequenz- Umformer max. turning speeds 4400 min/-1 type Borazon (CBN) o. Diamant mm diameter 450 mm bore D 127 mm peripheral speed max. 90 m/sec type GR-3520-NR mm diameter range D 20 - D 35 mm dimension D 80 x 250 mm flange D 100 standards association D 75 drive 1,8 kW max. turning speeds 24000 min/-1 weight of the machine ca. 7,0 t In our opinion, the machine is in good condition and can be inspected under power by appointment. There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW weight 75.0 kg including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system Phsdpfx Agsxabaiszea - Robust three-phase motor - Low vibration

Condition: good (used), Year of construction: 1999, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, total height: 2,250 mm, total length: 2,000 mm, total width: 3,050 mm, grinding height: 300 mm, For sale is a CNC surface grinding machine of the brand Geibel + Hotz and type FS 415-Z SL The machine is ready for immediate use and fully functional Technical data Year of construction: 1999 Sanding range: 400*200*300 mm Operating voltage: 400/50 Hz/3 phases Control voltage: 2300/24 Volt Grinding spindle motor: 2 kW Table drive: electro-mechanical Cross-path drive: electro-mechanical Wheel bore: 51 mm Clamping width: min. 10/max. 30 mm Cone: larger D= 25 mm Mounting flange: Da= 108 mm Grinding wheel: 225*25*51 mm Clamping surface: 400*200 mm Dressing diamond: 0.75 carat Belt filter: Available Space requirement: 2000*3050*2250 mm On request, transportation and loading can be organized for an extra charge. Europe-wide can be organized. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Pjdpfx Aouy Tkzjgzsha Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm Phjdpfsvr Hgvex Agzsa table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Phjdpowhqpljfx Agzoa

Condition: new, width of the strips 150 mm band length 2280 mm revolutions per minute 2880 U/min roll diameter 140 / 80 mm table-size 700 x 350 mm engine output 3.0 kW weight 250 kg range L-W-H 1300 x 800 x 1500 mm MADE IN GERMANY - Machinevideo - ?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension Podpfxoxab R Ie Agzjha - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Condition: good (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 230 mm, spindle speed (max.): 3,000 rpm, For sale is a surface grinding machine of the brand Okamoto, type PSG 52 UDX The machine is well-maintained and ready for immediate use Technical data: Year of manufacture: 1989 Grinding area: X-axis: 650 mm (manual) Z-axis: 230 mm Y-axis: 47 mm – 400 mm Max. height movement lower edge of new wheel (with ¯ 205 mm) min./max. - table) Grinding wheel ¯: Maximum ¯ 225 mm. Speed range: 3000 rpm (stepless speed control) Table feed: 0.3 – 25 m/min (hydraulic in X-axis) Pjdpfx Ajwnnbregzsha Table area ground: 550 x 200 mm Magnetic chuck: 500 x 200 mm (standard size) (Load incl. magnet max. 200 kg) Transport and loading can be arranged on request, for an additional charge, Europe-wide. Prices plus VAT Viewing possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, visit our website

Condition: used, Year of construction: 2007, max. workpiece diameter 800 mm profile depth 100 mm control Siemens Sinumerik 840 D Pjdpow Rrckefx Agzoha x-travel 650 mm y-travel 300 mm z-travel 1300 mm spindle turning speed - stepless 400 - 4000 U/min table turning speeds 0 - 10 U/min total power requirement 110 kVa dimensions of the machine ca. 9,48 x 6,13 x 5,00 m weight of the machine ca. 24,5 t Tool: - Largest grinding wheel diameter 450 mm - Largest grinding wheel width 160 mm Feed rates: - X-axis 1 to 3000 mm/min - Y-axis 1 to 5000 mm/min - Z-axis 1 to 6000 mm/min Equipment/accessories: - Counterholder - Grinding oil treatment system - Oil mist extraction - Measuring probe - Dresser - Technical documentation

Condition: good (used), Year of construction: 1971, functionality: fully functional, For sale is a surface sanding machine of the brand Aba and type FF600/30 from 1971 The machine is fully functional and ready for use. Technical data: Sanding length: 600mm Sanding width: 250mm Workpiece height: 400mm Grinding wheel 300 x 30 x 51 mm Voltage: 380 V Power: 5.82 kW Weight: 1.7 tons Coolant system Podpjqzhqbofx Agzjha 2x grinding wheel holders On request, dismantling, loading and transport can be organized throughout Europe for an additional charge Prices plus VAT Glnld8 Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 1970, Grinding diameter Ø 250 mm grinding length 750 mm grinding wheel size 400 x 50 mm kW Power at the spindle 3 kW Phjdpohbafwofx Agzea DIMENSION length 2400 mm width 1300 mm height 1500 mm

Condition: used, functionality: limited functionality, machine/vehicle number: FS 40, total height: 420 mm, For sale is a Geibel and Hotz surface grinding machine The Z-axis feed has a problem, otherwise the machine is in good condition. Technical data: Slide / X-axis: Table stroke max.: 420 mm Table stroke min.: 150 mm Number of table strokes/min at 400 mm stroke: max. 54 Phodpfjv E Hn Tox Agzoa Total length with all covers: 420 mm Z-axis: 205 mm Cover: FS 40 Hanging plates, number: 2 Length: 1270 mm Cross spindle: Pitch: Tr. 30 x 3 Handwheel scaling: 1 turn = 3 mm Handwheel limit switch: P - U1ST Fine adjustment: 0.020 mm Lubrication Spindle nut: Flat track: good Dimensions: Total height (with spindle protection): 2250 mm Height without spindle protection: 1850 mm Table width: 600 mm Total width: 1720 mm Table depth: 1310 mm If requested, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewings possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: used, functionality: fully functional, For sale is a universal cylindrical grinding machine from the Strausser-kellenberger brand Technical data: Manufacturer: Strausak AG Maschinenfabrik (Switzerland) Model: 57U Voltage: 380V / 50 Hz Phsdpfxev E Ivfj Agzja Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, travel distance W-axis: 450 mm, For sale: Hauser coordinate grinding machine, model S35-400 The machine is in excellent condition and underwent a partial overhaul in 2024 for €15,000. The machine is equipped with 6 high-quality grinding motors, a face motor, and turbines. TECHNICAL DATA Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm X-axis: 500 mm Y-axis: 350 mm Z-axis: 120 mm W-axis: 450 mm U-axis: 5.5 mm Maximum taper grinding: 16° Table size: 600 x 380 mm T-slots: 6 units, 10 mm width, 50 mm spacing Table load capacity: 300 kg Speeds and Tool Holders Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 Speed 80S: 40,000 - 80,000 rpm T10/T16: Ø 3 mm Speed T10/T16: 100,000 / 160,000 rpm Slot grinding attachment: 2,900 - 34,500 rpm Planetary movement: 5 - 250 rpm C-axis: 0 - 5 rpm X/Y feed: 0 - 1,200 mm/min W-axis feed: 900 mm/min Podpfx Aewtqthjgzoha Z-axis feed: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measuring accuracy: 0.001 mm Base deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ System pressure: 5 bar Footprint: 3.5 x 4.4 m Machine height: 3.5 m Connection value: 8.3 kVA Weight: 3.1 t EQUIPMENT - Slot grinding attachment - Rotary table, 300 mm diameter - Swivel table, 200 mm diameter - Coolant system - Extraction unit - Very high-quality accessories included Transportation and loading can be arranged across Europe at extra cost upon request. Prices plus VAT. Viewing by appointment is possible. Contact us—our team is happy to assist you. Trade-in or exchange possible! MACHINE PROCUREMENT / SALES PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: good (used), For sale is a graver grinding machine for grinding drills and cutters Deckel brand and type S0E. The machine is fully functional and in good (used) condition. Technical data: Pjdeh Ug Nkopfx Agzsha Type: KOD 526 S 12 kW: 5,5 V: 220/380 A: 2,45/1,4 rpm: 2850 Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible!

Condition: not inspected (used), For sale is an Okamoto surface grinder type ACC-12.24DX The machine can not be tested by us, because it requires a 60 Hz connection. Visually the machine is in good condition new grinding wheel included in the offer. Podpfx Ajnzhwwjgzsha Technical data: Volt: 230/460 Freq.: 60 Hz phase: 3 Power: 7.5 KvA Control voltage AC: 100 V Control voltage DC: 12-24 V Clamping surface: 30*67 cm grinding wheel diameter: 30 cm Pitch circle diameter: 7.5 cm On request, for an additional charge, the machine can be loaded on truck and the transport can be organized Europe-wide. Prices plus value added tax Viewing by appointment possible. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website