Used Mercator for sale (50)

Condition: good (used), This mineral wool production line has been built according to the customer's requirements and upgraded piece by piece. The description will be provided based on what has been demonstrated. A layout, as well as descriptions and drawings of all panel types that can be produced on this line, will be supplied. This information will be provided by the seller. Length of line: 172 m Panel width: 600 – 1200 mm Bledexugxyopfx Aaqep

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) Bjdpfx Aajxdt Umoqjlp 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Technical data: Bledpfx Aexruvzoaqsp Working length: 2050 mm Max. bending capacity: 18.0 mm Pre-bending: 12.0 mm Top roller diameter: 280 mm Bottom roller diameter: 280 mm Conical bending device Hydraulic drop-end bearing Motor power: 7.5 kW Dimensions (length x width x height): approx. 3650 x 1550 x 1650 mm Weight: approx. 7.5 tonnes The seller is not liable for typing or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee.

Condition: excellent (used), Year of construction: 2001, Technical Data / Technical Details: Production Line for PIR and PUR Sandwich Panels – Roof and Wall Total Line Length: 155 m Production Speed: 10 m/min Panel Width: 600 – 1200 mm Panel Thickness: 40 – 240 mm (double belt opening 260 mm) Lower Sheet Decoilers: 2 Upper Sheet Decoilers: 1 Corona Treatment: Applied to both upper and lower sheet Slitting (Upper Sheet): 1 unit Profiling: see details below Preheating Station: 2 units, IR heating Primer Application: 1-component system Foaming: High-pressure foaming unit, with low-pressure mixing Additives: 4-component dosing Blowing Agent: Pentane Cross-Head: Single head unit Heating (Double Belt): Combination of electric heating and gas burners Side Sealing: With block inserts Saw: Band saw and overlap circular saw Stacker: Included Tilter: Included Wrapper: Included 1–3 x Decoiler, 12 tonnes each 2 x Upper Decoilers with coil cars 1 x Lower Decoiler with coil car 2 – In-line Profiling 3 – Sheet Preheating (up to 70°C) 4 – Primer Dosing Unit 5 – PIR/PUR Dosing Unit (4 components) 6 – Double Cross-Bar System 7 – Siempelkamp Double Belt Press (15 m) 8 – Chain Side Block System 9 – Cutting Saw: Overlap circular saw and band saw 10 – Stacking Unit (for panels up to 12 m length) 11 – Wrapping Unit Bedpfx Asxpf Iioaqslp Disclaimer: The seller assumes no liability for errors in writing or data transmission. The machinery is in condition—visually, technically, and in terms of wear—appropriate to its age; used equipment is sold without any guarantee.

Condition: like new (used), Year of construction: 2013, Technical Data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt and join materials together. The laser welding cell consists of a fiber laser and a 6-axis industrial robot, which moves along a travel rail. The parts to be welded are clamped onto a rotary-tilting table. The safety enclosure is equipped with a sliding door to ensure safe operation. Robot: Type: M-710iC/50 (FANUC) Robot controller: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Reach: 2,050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: Full enclosure Robot track: Length: 1,500 mm Travel speed: 60 m/min Repeatability: ± 0.1 mm Positioning table: Working height: 700 mm Max. load capacity: 500 kg Rotary axis: ± 720° Tilting axis: ± 90° Bsdpjxndynjfx Aaqolp Laser source: Type: YLS4000-S2T Wavelength: 1,070 – 1,080 μm Laser power: 4 kW Control: Type: Amada Display: 15” LCD colour touchscreen Controlled axes: Robot and linear axis Coordination between robot and laser source Memory: 3 MB SRAM I/O interface: LAN, USB Welding Head: Amada Focus position adjustment: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving System: The integrated rotary optics allow the laser beam to move in a circular pattern. The patented system by AMADA enables welding of larger gaps with or without filler material and even allows welding of aluminum. NC Focus System: The NC Focus System automatically sets the optimal focus position for the specific welding condition. It supports welding simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be used. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates time-consuming manual teaching operations. Deviation between the programmed and actual weld path is detected using a CCD camera. Condition: Very good condition Machine has been used very little: approx. 16,500 operating hours. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2008, Technical specifications: 2D laser cutting machine CNC control: SIEMENS Laser type: CO2 Working area: 6000 x 2000 x 115 mm Laser power: 7 kW Cutting capacity, steel: 25 mm Cutting capacity, stainless steel: 25 mm Cutting capacity, aluminium: 15 mm CE marking Electrical equipment for three-phase current: 400 V / 50 Hz Pallet changer Cooling unit Operating hours “Beam On”: 13,600 Operating hours “Laser On”: 40,500 Bledjxndmujpfx Aaqep Dimensions (L x W x H): approx. 17,000 x 4,600 x 2,600 mm Weight: approx. 12 t Condition: Very good condition Machine has only been used very little The seller is not liable for typographical or data transmission errors. The machine is in a condition, both visually and technically as well as in terms of wear, appropriate to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2007, Technical data: Centre height: 500 mm Swing diameter: 1090 mm Bljdpfoxlgmfjx Aaqsp Swing diameter over cross slide: 690 mm Centre distance: 1500 mm Spindle speeds: 6 – 1250 rpm Spindle bore: 155 mm Digital position display: SONY Bed width: 700 mm Tool holder: MT 6 Motor power: 30 kW CE marking Dimensions (L x W x H): approx. 3500 x 1750 x 1900 mm Weight: approx. 7.5 t Accessories: Central lubrication Coolant system Rear splash guard 3-jaw chuck 500 mm 4-jaw chuck 800 mm The seller is not liable for typographical or data transmission errors. The machine’s condition regarding appearance, technical characteristics, and wear is in accordance with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2011, Technical data: Two-column design Cutting capacity: 700 x 520 mm Cutting diameter (round steel): max. 520 mm Cutting diameter (square steel): max. 520 x 520 mm Cutting diameter (rectangular steel): max. 520 x 520 mm CNC control: B&R PP 45 Hydraulic bundle clamping Hydraulic lowering Infinitely variable saw band speed Mobile control panel with digital display Saw blade dimensions: 6640 x 41 x 1.3 mm Cutting speed: 15 - 90 m/min Working height: 770 mm Motor power: 5.5 kW Dimensions (L x W x H): approx. 3500 x 3000 x 2500 mm Weight: approx. 5.0 t Accessories: Bljdpfoxlcpvsx Aaqsp 4 new saw blades Condition: Almost as-new condition The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2010, Technical specifications: Working length: 1020 mm Frame gap: 932 mm Pressing force: 36 t CNC control: TASC 6000 Number of controlled axes: 6 Stroke: 120 mm Working height: 1150 mm Electronic direct drive Automatic tool clamping CE marking Bedpfx Aasxlcccjqslp Dimensions (L x W x H): approx. 1950 x 1350 x 2400 mm Weight: approx. 2.6 tonnes Accessories: Inductive length measuring system and temperature compensation Control cabinet cooling Side safety doors The seller is not liable for typing or data transmission errors. The machine's condition regarding appearance, technology and wear is commensurate with its age; used machines are sold without any guarantee.

Condition: excellent (used), Year of construction: 2001, Technical Specifications: Working length: 4230 mm Blodpsxhf D Uofx Aaqjp Frame gap: 3760 mm Press force: 170 t CNC control: AMADA Operator Number of controlled axes: 5 Motorized adjustable backgauge Throat depth: 600 mm Stroke: 350 mm Working height: 960 mm Motor power: 16.5 kW CE marking Dimensions (L x W x H): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tonnes Accessories: Side-mounted movable safety guards The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Technical specifications: 2 hydraulically adjustable rolls 3 driven rolls Roll diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Bedoxgukuopfx Aaqjlp Motor power: 4 kW Machine can operate horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2009, Technical Data: Working length: 3230 mm Distance between uprights: 2690 mm Pressing force: 230 tons CNC control: TASC 6000 Number of controlled axes: Stroke: 445 mm Throat depth: 420 mm Table width: 140 mm Working height: 1065 mm Crowning: CNC-controlled Hydraulic tool clamping Die shifting Blodpfxjxdt U Ho Aaqop CE marking Motor power: 30 kW Dimensions (L x W x H): approx. 4150 x 2350 x 3100 mm Weight: approx. 17 tons Accessories: 2 pcs. bending aids Electronic pressure gauge Measuring system with centrally mounted glass scales and temperature compensation Safety device BendGuard Network capability Support arm with height adjustment Condition: Overall in very good condition Little used, 35,000 hours The seller is not liable for typographical or data transmission errors. The machine is visually, technically, and regarding wear in accordance with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2015, Technical data: Working length: 4100 mm Frame gap: 3700 mm Pressing force: 170 tons Top drive with 4-cylinder design CNC control: TASC 6000 Number of controlled axes: X; R; Z1/Z2 Stroke: 445 mm Throat depth: 410 mm Installation height: 385 mm Working height: 1050 mm Bodsxcayajpfx Aaqjlp Hydraulic tool clamping, top and bottom Pneumatic die shifting, CNC-controlled Crowning, CNC-controlled CE mark Motor power: 37 kW Dimensions (L x W x H): approx. 5650 x 2350 x 3000 mm Weight: approx. 13.5 tons Accessories: Electronic pressure gauge Measuring system with centrally mounted glass scales and temperature compensation Control cabinet cooling BendGuard safety system Network capability Support arm with adjustable height Condition: Overall in very good condition Machine has been stored The seller does not accept liability for typographical or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Technical data: Working width: 2550 mm Bending capacity: 12.0 mm Pre-bending: 10.0 mm Top roll diameter: 265 mm Central roll diameter: 245 mm Side roll diameter: 185 mm Hardened rolls Conical bending device by tilting both side rolls Mobile control panel with digital display Motor power: 18.5 kW CE marking Bljdpfx Aexbrhteaqsp Dimensions (L x W x H): approx. 4500 x 2000 x 1900 mm Weight: approx. 7.5 t Accessories: Hydraulic bending support on top Lateral bending support Condition: Very good condition due to complete overhaul at the beginning of 2025 The seller assumes no liability for typographical or data transmission errors. The machine’s appearance, technology, and wear are age-appropriate; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2008, Technical data: Centre height: 290 mm Turning diameter: 580 mm Turning diameter over slide: 380 mm Turning diameter in the offset: 780 mm Centre width: 1500 mm Revolutions: 25 - 2000 rpm Spindle bore: 72 mm Digital position display: NEWALL C80 (X / Y) Bed width: 400 mm Tool holder: MK 5 Bsdotttmnopfx Aaqslp Motor power: 11 kW Dimensions (length x width x height): approx. 3100 x 1300 x 1600 mm Weight: approx. 3.5 tons Accessories: Feed and rapid traverse via joystick Gap and tool quick changer We can only show a small part of our current range of used machines here. Please also visit our homepage! The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2007, Technical data: Material thickness: 0.5 – 20 mm Max. processing width: 1500 mm Number of units: 3 Infinitely variable feed: 0 – 4 m/min Grinding motor drive power: 4 x 3.0 kW Motor power: 12.6 kW Dimensions (L x W x H): approx. 2730 x 1500 x 1550 mm Bedpfjw U Dmiex Aaqelp Weight: approx. 2.3 tons Application areas: Double-sided deburring of flame-cut, punched, laser-cut, autogenously cut parts, as well as waterjet-cut components Condition: Very good condition, due to little use Operating hours: 35,000 Scope of delivery: Machine with LISSMAC extraction system

Condition: excellent (used), Year of construction: 2008, Technical Data: Plasma cutting system with drilling and thread cutting unit Working area: 2100 x 4250 mm Number of plasma cutting heads: 1 Number of tool holders: 6 Plasma cutting system: HYPERTHERM HPR 130 CE marking Dimensions (length x width x height): approx. 6600 x 4000 x 2300 mm Bjdew Uz Tgepfx Aaqslp Weight: approx. 13 t The seller accepts no liability for typographical or transmission errors. The machine's condition in terms of appearance, technology, and wear is age-appropriate; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1996, Technical data: maximum cutting width: 3100 mm maximum cutting performance for steel St40: 15.0 mm motorized adjustable parallel stop: 1500 mm motorized adjustable cutting gap adjustment cutting angle adjustment working height: 860 mm motor power: 22 kW side protective grille with light barrier on the back dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm weight: approx. 13.5 tons Bledpfeummw Tsx Aaqjp We can only show a small part of our current range of used machines here. Please also visit our homepage! The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2016, Technical Data: Capacity: 4000 x 7 mm Minimum diameter: 550 mm Maximum diameter: 4000 mm Maximum sheet thickness (steel): 7 mm Maximum sheet thickness (stainless steel): 4 mm Maximum edge radius: 300 mm Minimum edge radius: 20 mm Maximum bottom diameter: 4000 mm Minimum bottom diameter: 300 mm Maximum total height of bottom including straight section: 640 mm Maximum diameter of torispherical ends: 3000 mm Minimum diameter of torispherical ends: 300 mm Maximum diameter of semi-elliptical heads: 1950 mm Minimum diameter of semi-elliptical heads: 300 mm Bjdpfxsw Tq Sis Aaqjlp CE marking Working height: 640 mm Motor power: 15 kW Weight: approx. 5.5 t Accessories: various tools Condition: Very good condition, little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2013, Technical Data: Working length: 3050 mm Distance between uprights: 2550 mm Pressing force: 130 tons CNC control: EHT EPC-D01-3D graphic controller 2D and 3D programming Touchscreen 17" LCD color display EHT angle measuring system Controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke: 400 mm Throat depth: 405 mm Installation height: 595 mm Table width: 110 mm Working height: 1065 mm Crowning: CNC-controlled Safety device: PILZ PSENvip 440 Camera-based system 2 support arms with T-slot Hydraulic tool clamping top and bottom CE marking Motor power: 15 kW Dimensions (L x W x H): approx. 4150 x 1950 x 3200 mm Bsdpfx Aaew Tdcbjqjlp Weight: approx. 11 tons Accessories: Control cabinet air-conditioning unit Various tools The seller is not liable for typographical or data transmission errors. Machine condition regarding appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Blodpsw Tcncofx Aaqsp Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2009, Technical Data: Working length: 3600 mm Max. bending capacity: 95.0 mm Top roller diameter: 950 mm Lower roller diameter: 740 mm Hydraulic folding bearing Control panel with digital display Motor power: kW Dimensions (Length x Width x Height): approx. 5300 x 1200 x 1750 mm Weight: approx. 165 tons Accessories: Second top roller diameter 900 mm Upper bending aid Blodpfxsw Suw Hj Aaqsp

Condition: like new (used), Year of construction: 2016, Technical Data: Robotic welding system featuring a 6-axis articulated arm robot with classic wrist and a 7th robot axis Robotic welding system with QIROX control V6A / QR-WPS-DH-TCS-10kN The robotic welding system has a total of 13 axes 7 robot axes, one axis extending the robot’s workspace by an additional 1200 mm, an asynchronous axis for station transfer, and two axes per station Offline laser sensor Torch changer system Maximum distance between rotation axis and support: 4500 mm Swing radius: 1050 mm Maximum workpiece dimensions: 4000 x 2000 x 800 mm Maximum swing weight without support: 500 kg Maximum swing weight with support: 1000 kg Two work positions: for loading and welding Power source: Qineo Champ 450A MIG/MAG welding: 450 A Extraction system incl. extraction hood: HERR Bedpow Idv Defx Aaqelp Various partitions, safety barriers, and safety scanners Roboplan incl.: • Module tool change • Module macro technology • Module flat position Condition: As-new condition, very lightly used, approx. 10,000 operating hours The system is still assembled and can be inspected The seller accepts no liability for typographical or data transmission errors. The machine is in age-appropriate optical, technical and wear condition; used machines are sold without any guarantee.

Condition: excellent (used), Year of construction: 2000, Technical data: Working length: 4100 mm Stand width: 3650 mm Pressing force: 170 to CNC control: OPERATOR II grafic controlled axes: Y1/Y2; X1/X2; R1/R2;, Z1/Z2 motorized adjustable back gauge throat depth: 300 mm stroke: 200 mm crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: Bsdpst Upp Uofx Aaqslp 1 set of tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Technical data: 2 rollers hydraulically adjustable 3 rollers driven Blsdpjt Ukqasfx Aaqep Bending moment: 110 cm/3 Shaft diameter: 180 mm Roller diameter: 460 mm Main motor power: 15 kW Digital display Dimensions (length x width x height): approx. 2000 x 1700 x 1600 mm Weight: approx. 6.5 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.