Hydr. Press brake

TRUMPF TruBend 8300 4100 x 300 to

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is Dcjdpfx Aeu S Ahqsgljb wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm Dcodpfxju Rt I Ie Agleb quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Condition: excellent (used), Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 100 mm grinding wheel diameter 360 mm total power requirement kW weight of the machine ca. 3,8 t Dodpfx Ageunt Eyslecb dimensions of the machine ca. 3,5 x 1,3 x 1,5 m Machine in very nice condition, external + internal spindle, many accessories.

Condition: excellent (used), Year of construction: 2012, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, working range: 4,000 mm, Used fully serviced, clean cutting Bystronic Bystar 4020 6kw 4metre x 4metre flat bed industrial cnc laser for sale High powered Bystronic Bystar 4020 4metre x 2metre cnc laser for sale Power: 6kw / 6000 watt / Bylaser 6000 Cutting area: 4000mm x 2000mm Year / new: 2012 Fully serviced with Bystronic and well maintained With rotary axis for cutting steel tube Djdjqcu Avjpfx Aglscb Cutting heads: 5inch, 7.5inch and 7.5inch long head In good working order, can be seen in production Delivery, installation and tuition can be quoted Ideal for cutting thick stainless steel, mild steel and aluminium

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Dcsdpfx Agsn Arm Teljb Spectral range: 1600-2400 nm. Pixel pitch 8nm Optical resolution 11nm Scattered light

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm strip width: 500 - 1.650 mm strip thickness: 1 - 5 mm Dcedpfxsg Iirnj Aglsb

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by Dsdpfxjfg E Hpo Aglocb the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, prebending: 13,0sheet length: 3100sheet thickness: 16,0total power requirements: 17,5weight approx.: 11,6messurements (LxWxH): 5,31x1,66x1,59 Dcjdpfxed Auaco Agljb

Condition: excellent (used), Year of construction: 2008, Technical Data: Working length: 3550 mm Stand width: 3050 mm Press force: 230 tons CNC control: CYBELEC ModEva 12S controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke: 550 mm Throat depth: 410 mm Mounting height: 745 mm (extra high) Table width: 140 mm Working height: 1065 mm CNC-controlled crowning CE marking Motor power: 42 kW Dimensions (length x width x height): approx. 4650 x 2350 x 3100 mm Weight: approx. 25 tons Accessories: 2 pcs. CNC-controlled bending aids, front side 1 pc. CNC-controlled bending aid, rear side!!! Dsdpfx Agswntqxolecb The seller is not liable for typing or data transmission errors. The machine corresponds in appearance, technology, and wear to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm Dcjdou Tp N Dopfx Agleb - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *