Used Merlo 4016 for sale (75)

Condition: used, power: 85 kW (115.57 HP), overall weight: 6,500 kg, operation weight: 6,500 kg, maximum load weight: 6 kg, Year of construction: 2024, operating hours: 682 h, maximum speed: 40 km/h, Operating hours: 682, Initial registration: 07.11.2024. Standard equipment / technical data: Maximum load capacity 3,300 kg, maximum lifting height 6,600 mm, maximum reach 3,500 mm, length to carriage 4,310 mm, width 2,100 mm, height 2,120 mm, total weight with load forks 6,500 kg, total weight without load forks 6,330 kg. Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, power: 85 kW (115 hp), 2,300 rpm, Stage V, diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR). Hydrostatic drive: Pump electronically controlled with variable displacement, motor: variable motor, EPD TOP including optional automatic speed increase. Mineral hydraulic oil HVI 46. Transmission: 2 gears, electro-hydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h. Cabin: Enclosed cabin, split door, 360-degree all-round visibility, GRAMMER air-suspended seat with safety lap belt, ROPS/FOPS approved, heating, front, roof and rear window wipers, sun visor, 4x1 joystick, electronic with capacitive release including direction of travel switch. Telescopic boom: 2-piece with electronic end-of-stroke damping (Soft Stop). Carriage: quick-change system, type "ZM2", hydraulically controlled from the cabin. Steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering. Drive: permanent all-wheel drive. Axles: front axle fixed, rear axle oscillating. Braking system: servo-assisted disc brakes on all four drive axles, automatically acting parking brake when the engine is stopped. Hydraulic system: pump with variable displacement, type "LOAD SENSING", flow rate work hydraulics: 125 l/min, flow rate hydraulic fan: 46 l/min, total flow rate: 171 l/min, working pressure: 210 bar, flow-sharing control block. Electrical system: 12 V, battery with 100 Ah, alternator 120A, stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off. Tires: 400/70-20. Standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer hitch, hydraulic reversing fan, radio preparation, work lights on the cabin (2 front, 2 rear), V2001 preparation for additional function on the boom head, 2 hydraulic connections on the boom head, load protection grid on the carriage, lighting for road travel, automatic battery disconnect switch, electrical connection cable in the boom, acoustic signal when reversing, boom cylinder support for securing. Optional equipment: EU approval as a tractor / agricultural tractor 40 km/h including trailer hitch, height adjustable, self-locking, 30/32 mm pin, including connection for trailer lighting, air conditioning, vibration damping on the boom (B.S.S.), LED rotating beacon on the cabin roof (approval is the customer's responsibility!), LED work lights on the cabin (2 front, 2 rear) instead of the standard halogen spotlights, 2 work lights at the end of the first arm (basic arm), rear hydraulic connection with separate control. Fjdpfszdmtpjx Am Eogi

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 1,907 h, load capacity: 3,300 kg, lifting height: 6,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,700 kg, total length: 4,310 mm, drive type: Diesel, construction width: 2,100 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Fjdsy Scnnopfx Am Eogi Front tires size: 400/70-20 Rear tires size: 400/70-20

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 5,517 h, load capacity: 3,800 kg, lifting height: 15,740 mm, fuel type: diesel, construction height: 2,850 mm, fork carriage width: 1,500 mm, fork length: 1,200 mm, empty load weight: 12,650 kg, total length: 4,700 mm, drive type: Diesel, construction width: 2,290 mm, Rotating telescopic forklift Fork width: 125 mm Fork thickness: 50 mm Technical condition: good Front tire size: 405/70-20 Rear tire size: 405/70-20 Full cab, safety light Fgodpfsz H D Nqjx Am Eoi

Condition: used, machine/vehicle number: 3641, Year of construction: 2017, operating hours: 2,809 h, load capacity: 3,800 kg, lifting height: 16,000 mm, overall weight: 12,100 kg, Hubhöhe: 16,0 m Tragkraft: 3.800 kg Gesamtgewicht: 12.100 kg Ausladung ca. 13 m Einzelkabine mit 1 Sitz Antrieb über 4 Zylinder Kubota Dieselmotor Teleskop- Stahlbauweise Reifengröße 405/70-R20, Profil 15-20 mm, Radstand 2750 mm, Radformel 4x4x4 Fgjdpszuk Urefx Am Eji Gesamtmaße (L x B x H) 6250 x 2300 x 3000 mm Hydraulische 4- Punkt Abstützung 4700 x 3900 mm Funkfernsteuerung Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben

Condition: good (used), machine/vehicle number: 53960854045014, Year of construction: 2020, operating hours: 1,817 h, load capacity: 4,950 kg, lifting height: 25,900 mm, fuel type: diesel, mast type: other, overall weight: 16,600 kg, Der Merlo R 50.26S ist ein leistungsstarker, drehbarer Teleskopstapler, der für vielseitige Einsätze in Bau, Logistik und Industrie konzipiert wurde. Mit einer beeindruckenden maximalen Hubhöhe von 26 Metern, einer seitlichen Reichweite von 22,9 Metern... Fgodpezqbz Iefx Am Eei Der Merlo R 50.26S ist ein leistungsstarker, drehbarer Teleskopstapler, der für vielseitige Einsätze in Bau, Logistik und Industrie konzipiert wurde. Mit einer beeindruckenden maximalen Hubhöhe von 26 Metern, einer seitlichen Reichweite von 22,9 Metern...

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C9000052, Year of construction: 2019, operating hours: 1,483 h, lifting height: 13,800 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, documentation/manual, The current UVV inspection report is attached! The UVV certification is valid until 10/2027! Maintenance and servicing have always been carried out according to the manufacturer's intervals. TECHNICAL DETAILS Load capacity: 3.8 t Lifting height: 13,800 mm Fork length: 1,200 mm MACHINE DETAILS Drive: Diesel Fgsdozzxv Dopfx Am Eji Tire condition Condition of front right tire: Approx. 80% Condition of front left tire: Approx. 80% Condition of rear right tire: Approx. 80% Condition of rear left tire: Approx. 80% Operating hours: 1,483 h EQUIPMENT UVV inspection valid until 10/2027 Fork carriage Seat cover Spare key Documents Side shift Supports Leveling system

Condition: used, Year of construction: 2025, operating hours: 122 h, Operating hours: 122, First registration: 08.10.2025 Maximum lifting capacity: 3,000 kg Maximum lifting height: 6,700 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,510 mm Width: 2,000 mm Height: 2,120 mm Total weight with forks: 6,620 kg Total weight without forks: 6,450 kg Engine: Fodpfxoyv S Ufs Am Ejgi 4-cylinder Deutz TCD 2.9 2.9 L displacement, water-cooled Power: 75 kW (101 hp) 2,600 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD PLUS including optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed Electrohydraulic control Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h Cab: Fully enclosed cabin, split door 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 joystick, electronic with capacitive release and travel direction switch Telescopic boom: 2-section with electronic end position cushioning (Soft Stop) Attachment carrier: Quick-change system type “ZM2” hydraulically controlled from the cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle rigid Rear axle oscillating Braking system: Servo-assisted disc brakes on all four wheels Automatic parking brake when engine is off Hydraulic system: Load-sensing pump with variable output Total flow: 100 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12V battery with 100 Ah Alternator 120A Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Tyres: 400/70-20, agricultural tread Standard equipment: Power brake Hydraulic oil cooler Rear plate for mounting a trailer hitch Radio preparation Work lights on cabin (2 front, 2 rear) V2001 preparation for additional function at boom head 2 hydraulic connections at boom head Load guard on attachment carrier Road lighting Automatic battery disconnect switch Electrical connection cable inside boom Audible reverse warning Lift cylinder support for safety 1 Operating manual 1 Engine manual Special equipment: EU approval as tractor/towing vehicle 40 km/h incl. height-adjustable, self-locking trailer hitch, 30/32 mm pins, trailer lighting connection Air conditioning LED work lights on cabin (2 front, 2 rear) Boom suspension (B.S.S.) Location: 54595 Prüm

Condition: used, Year of construction: 2016, operating hours: 7,850 h, Rigid telescopic forklift Mast type: None Fodpfxj Ahuzrs Am Ejgi

Condition: good (used), machine/vehicle number: 48706927067478, Year of construction: 2018, operating hours: 3,135 h, load capacity: 4,000 kg, lifting height: 26,050 mm, fuel type: diesel, mast type: other, overall weight: 16,000 kg, Der Merlo Roto 40.26 MCSS Schwerlast-Teleskopstapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 26,05 Metern und einer maximalen Traglast von 4.000 kg bewältigt er auch schwerste Lasten probl... Der Merlo Roto 40.26 MCSS Schwerlast-Teleskopstapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 26,05 Metern und einer maximalen Traglast von 4.000 kg bewältigt er auch schwerste Lasten probl... Fjdpfx Amszqb Dco Ejgi

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,354 h, maximum speed: 40 km/h, Operating hours: 1354, First registration: 10/11/2022. Basic equipment / technical data: max. load capacity 4,200 kg, max. lifting height 7,000 mm, max. outreach 3,800 mm, length to carriage 4,730 mm, width 2,310 mm, height 2,530 mm / 2,590 mm (CS activated), total weight with forks 8,170 kg, total weight without forks 8,000 kg, engine 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, power: 105 kW (143 hp) at 2,300 rpm, hydraulic reversing fan, Stage V, diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR), hydrostatic drive, pump: electronically controlled with variable flow rate, motor: swashplate motor, EPD TOP including optional automatic speed increase, mineral hydraulic oil HVI 46, transmission 2 gears, electro-hydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h, cab: enclosed cab, split door, 360-degree all-round visibility, V3611 GRAMMER air-suspended seat with safety lap belt, ROPS/FOPS tested, heater, front, roof and rear window wipers, sun visor, 4x1 joystick electronic with capacitive activation including direction switch, CS = hydropneumatic vibration damping of the cab, telescopic boom 2-part with electronic end damping "Soft Stop", carriage quick-change system type "ZM2" hydraulically controlled from the cab, steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering, drive: permanent all-wheel drive, axles: front axle fixed, rear axle oscillating, braking system: servo-assisted disc brakes on all four drive axles, automatic parking brake when engine is stopped, frame construction: in high-strength steel, hydraulic system: pump with variable flow rate of type "LOAD SENSING", flow rate working hydraulics: 150 l/min, flow rate hydraulic fan: 46 l/min, total flow rate: 196 l/min, working pressure: 250 bar, flow-sharing control block, electrical system: 12 V, battery with 100 Ah, alternator 120 A, stability control: simplified Merlo ASCS system (ASCS-light) with full electronic stability control, audiovisual signal, implement recognition and overload cut-off, tires: 460/70 R 24 Michelin XMCL, standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer hitch, hydraulic reversing fan, radio preparation, work lights on the cab (2 front, 2 rear), preparation for additional function at the boom head, 2 hydraulic connections at the boom head, load protection grille on the carriage, lighting for road travel, automatic battery master switch, electrical connection cable in the boom, acoustic signal when reversing, lifting cylinder support for securing, optional equipment: EU approval as a tractor / agricultural tractor 40 km/h including trailer hitch, self-locking, 30/32 mm pin, including connection for trailer lighting, height-adjustable version recommended for compact and medium, air conditioning, vibration damping on the boom (B.S.S.), LED rotating beacon on the cab roof (approval is the responsibility of the customer). Fgjdpfx Amstu Szte Esi

Condition: used, Year of construction: 2024, operating hours: 193 h, maximum speed: 40 km/h, Operating hours: 193, First registration: 15.01.2025 Basic equipment / technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to attachment plate: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) Fgodpfx Amjuycgfo Eji - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - Deutz TCD 3.6, 4-cylinder, 3.6 liters displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive pump: electronically controlled with variable displacement - Motor: variable displacement - EPD TOP including optional automatic rpm increase - Mineral hydraulic oil HVI 46 Transmission - 2 gears, electrohydraulic control - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360-degree all-around visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS certified - Heater - Front, roof, and rear wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector - CS = hydropneumatic suspension for cab vibration damping Telescopic Boom - 2-piece, with electronic end-position damping (Soft Stop) Attachment carrier - Quick change system type "ZM2", hydraulically controlled from the cabin Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle rigid, rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels - Automatically applied parking brake when engine is off Chassis - High-strength steel frame construction Hydraulic System - Load Sensing variable displacement pump - Hydraulic work circuit: 150 l/min - Hydraulic fan circuit: 46 l/min - Total: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stability Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alarm, attachment recognition, and overload shutdown Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo brake - Hydraulic oil cooler - Rear plate for towing hitch mounting - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Attach. protection guard on carrier - Road travel lighting - Automatic battery main switch - Electric cable inside boom - Acoustic signal when reversing - Hoist cylinder support for securing Optional Equipment - EU road approval as tractor/tow vehicle 40 km/h incl. self-locking hitch, 30/32 mm pin, trailer lighting socket - Air conditioning - Boom vibration damping (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights on the first boom section (base boom) - AS

Condition: used, Year of construction: 2013, Operating hours: approx. 1550h, displacement: 6728cm³, power: 107kW, total weight: 16.5t. Including winch, work platform, high-pressure hose with reel, forks and lattice boom extension. A new rotary union is available as a spare part. An on-site inspection is possible. Fgedpfx Amezx Eg Rs Eei

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 3,635 h, load capacity: 3,800 kg, lifting height: 14,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,400 mm, power: 75 kW (101.97 HP), empty load weight: 9,100 kg, drive type: Diesel, construction width: 2,200 mm, Telescopic handler, rigid frame Mast type: Telescopic Technical condition: good Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% Description: Merlo P38.14 - - - Year of manufacture 2013 - - - 3635 operating hours - - - 3.8 tons - - - 14 m reach - - - hydraulic QUICK COUPLER - - - side shift - - - 4-wheel steering - - - 4-wheel drive - - - 3 steering modes - - - 2-speed hydrostatic transmission - - - 4-cylinder PERKINS Turbo diesel engine - - - LEVELING SYSTEM - - - 9100 kg operating weight - - - good tires, approx. 90% - - - including pallet forks - - - good condition - - - mechanical version - - - without particulate filter - - - NEW bucket available at an extra cost! Fgedpfxs Aa Hcmj Am Esi Quick coupler, 3rd valve, rear work light, front work light, heater, full cabin.

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 3,000 kg, lifting height: 8,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,020 mm, empty load weight: 7,200 kg, total length: 4,330 mm, drive type: Diesel, construction width: 2,100 mm, Rigid telescopic forklift Mast type: Telescopic Fgodpfx Aj Aa Eg Rom Eei Technical condition: New Front tires size: 400/70-20 Rear tires size: 400/70-20

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 7,200 kg, lifting height: 9,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,850 mm, empty load weight: 11,300 kg, total length: 5,480 mm, drive type: Diesel, construction width: 2,520 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Fjdpfxo Aa Ehbo Am Ejgi Front tires size: 400/70-24 michelin xcml Rear tires size: 400/70-24 michelin xcml

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 219 h, maximum speed: 40 km/h, Operating hours: 219, First registration: 16.01.2024 _____ Max. load capacity: 4,200 kg Max. lift height: 7,000 mm Max. outreach: 3,800 mm Length to attachment carrier: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (with CS activated) Total weight with forks: 8,170 kg Total weight without forks: 8,000 kg Engine: 4-cylinder Perkins 904J 3.6 l displacement, water-cooled Output: 100 kW (136 HP) 2,300 rpm Hydraulic reversing fan Emission Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement EPD PLUS incl., with optional automatic rpm increase Mineral-based hydraulic oil HVI 46 Transmission: 2 speeds, electrohydraulically controlled Vmax = 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: closed cab, split door, 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 electronic joystick with capacitive enable incl. direction selector switch CS = hydropneumatic cab suspension Telescopic boom: 2-section with electronic end-position dampening (Soft Stop) Quick-attach device carrier Type "ZM2" hydraulically controlled from cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Permanent all-wheel drive Axles: fixed front axle, oscillating rear axle Brake system: servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine is off Frame: high-strength steel design Hydraulic system: variable displacement pump "LOAD SENSING" Working hydraulics flow: 151 l/min Hydraulic fan flow: 46 l/min Total flow rate: 197 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120 A alternator Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement detection, and overload shutoff Tires: 460/70 R 24 Standard equipment: servo brake, hydraulic oil cooler, rear mounting plate for tow bar, hydraulic reversing fan, radio prep, work lights on cab (2 front, 2 rear), preinstalled function for auxiliary hydraulics at boom head, 2 hydraulic connections at boom head, load protection guard on attachment carrier, road lighting, automatic main battery disconnect, electrical cable in boom, acoustic reverse signal, lift cylinder support for safety Special equipment: EU homologation as tractor/ towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connector Air conditioning Boom suspension (B.S.S.) LED work lights on cab (2 front, 2 rear) 2 work lights at the end of the first boom section (base boom) ASCS upgrade: monitor with all ASCS functions + thumb... Fgsdpfx Aepcht Hjm Eoi

Condition: good (used), machine/vehicle number: 51617486799190, Year of construction: 2020, operating hours: 2,814 h, load capacity: 4,950 kg, lifting height: 20,800 mm, fuel type: diesel, mast type: other, overall weight: 15,800 kg, Der Merlo R 50.21 S Teleskopstapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 20,80 Metern und einer maximalen Traglast von 4.950 kg bewältigt er auch schwere Lasten problemlos. Bei maximale... Fjdpfx Amezqby De Ejgi Der Merlo R 50.21 S Teleskopstapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 20,80 Metern und einer maximalen Traglast von 4.950 kg bewältigt er auch schwere Lasten problemlos. Bei maximale...

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 3,300 kg, lifting height: 6,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,700 kg, total length: 4,310 mm, drive type: Diesel, construction width: 2,100 mm, Rigid telescopic forklift Fedpfxszqhtke Am Eogi Mast type: Telescopic Technical condition: New Front tires size: 400/70-20 Rear tires size: 400/70-20

Condition: good (used), machine/vehicle number: 49889159610710, Year of construction: 2020, operating hours: 877 h, load capacity: 3,300 kg, lifting height: 6,600 mm, fuel type: diesel, mast type: other, overall weight: 6,330 kg, Der Merlo TF 33.7 Teleskopstapler ist eine leistungsstarke Maschine für vielseitige Hebe- und Transportaufgaben. Mit einer Hubhöhe von 6,60 Metern und einer maximalen Traglast von 3.300 kg bewältigt er auch schwere Lasten problemlos. Bei maximaler Reic... Fgjdpfx Amezqb Emo Eoi Der Merlo TF 33.7 Teleskopstapler ist eine leistungsstarke Maschine für vielseitige Hebe- und Transportaufgaben. Mit einer Hubhöhe von 6,60 Metern und einer maximalen Traglast von 3.300 kg bewältigt er auch schwere Lasten problemlos. Bei maximaler Reic...

Condition: good (used), machine/vehicle number: 49045682553174, Year of construction: 2019, operating hours: 1,703 h, load capacity: 4,000 kg, lifting height: 17,600 mm, fuel type: diesel, mast type: other, overall weight: 13,600 kg, Unser Merlo R 40.18S Rotostapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 17,60 Metern und einer maximalen Traglast von 4.000 kg bewältigt er auch schwere Lasten problemlos. Bei maximaler R... Unser Merlo R 40.18S Rotostapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 17,60 Metern und einer maximalen Traglast von 4.000 kg bewältigt er auch schwere Lasten problemlos. Bei maximaler R... Fedszqb Dpopfx Am Esgi

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 3 h, load capacity: 4,200 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 8,000 kg, total length: 4,730 mm, drive type: Diesel, construction width: 2,310 mm, Telescopic forklift rigid Mast type: Telescopic Fsdpfjznfqnex Am Eegi Technical condition: New Front tires size: 460/70 r 24 michelin xcml Rear tires size: 460/70 r 24 michelin xcml

Condition: good (used), machine/vehicle number: 54444183912790, Year of construction: 2021, operating hours: 1,155 h, load capacity: 3,300 kg, lifting height: 6,600 mm, fuel type: diesel, mast type: other, overall weight: 6,330 kg, enginetype: Diesel, manufacturer: Merlo Fedpfozp Ud Tex Am Eogi

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler underwent maintenance three months ago. During this service, the slew ring bolts were replaced among other tasks, and both the engine and hydraulic oils were serviced. TECHNICAL DATA Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Fgjdpfx Aex Dmgvom Eji Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew tower rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank capacity: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system On-board voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS certification Electronic joystick control Merlin control system Tac-Lock tool carrier Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch directional control Hydrostatic transmission Air suspension seat Note: The winch (€4,000) and work platform (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Condition: used, power: 125 kW (169.95 HP), Year of construction: 2026, operating hours: 118 h, Operating hours: 118, First registration: 04/21/2026 Max. lifting capacity: 5,000 kg Max. lifting height: 7,800 mm Max. outreach: 4,200 mm Length to carrier: 4,870 mm Width: 2,350 - 2,530 mm Height: 2,530 / 2,590 mm (CS activated) Total weight with load forks: 9,990 kg Total weight without load forks: 9,700 kg Fgodpfx Amszpcu Te Esi Engine: 4-cylinder FPT N454, displacement 5 l, water-cooled Power: 125 kW (170 hp) 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable flow rate Motor: Swashplate motor EPD PLUS incl. with optional automatic speed increase Mineral hydraulic oil HVI 46 Transmission: 2 gears Electrohydraulically controlled Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: Enclosed cab Split door 360-degree all-round visibility ROPS/FOPS tested GRAMMER air-suspended seat with safety lap belt Heater Front, roof, and rear window wipers Sun visor 4x1 joystick, electronic with capacitive activation incl. direction of travel switch CS = hydropneumatic vibration damping of the cab Telescopic boom: 2-part with electronic end-of-stroke damping (Soft Stop) and telescopic arm suspension (BSS) Carrier: Quick-change system, type "ZM3" with triple locking, hydraulically controllable from the cab Leveling: hydraulically controlled Steering: Hydraulic steering 3 steering modes: All-wheel steering, front-wheel steering, crab steering Drive: Permanent all-wheel drive Axles: Front axle manually adjustable Rear axle oscillating with differential lock Braking system: Disc brakes on all 4 drive axles Automatic parking brake when engine is stopped Frame design: Made of high-strength steel Hydraulic system: Pump with variable flow rate, type "LOAD SENSING" Flow rate max. 160 l/min Pressure max. 250 bar Flow-sharing control block Hydraulic quick-coupling system Electrical system: 12 V Battery with 100 Ah Alternator 120 A Stabilization control: computer-assisted (ASCS system) with fully electronic stability control and simple weighing function, audiovisual signal and overload shut-down as well as implement recognition Display in the display Warning and shut-down in case of overload Tires: 500/70 R24, agricultural lug profile Additional equipment: EU approval as a tractor/agricultural tractor 40 km/h incl. trailer hitch, height-adjustable, self-locking, 37/38 mm pin, incl. connection for trailer lighting Air conditioning LED work lights on the cab (2 front, 2 rear) instead of the standard halogen headlights 360° LED work lights (incl. 2x LED at the end of the first arm + 4 more LED lights on the machine) Double rear hydraulic connection with switchover Location: 54595 Prüm

Condition: good (used), machine/vehicle number: 49045518778710, Year of construction: 2022, operating hours: 320 h, load capacity: 2,500 kg, lifting height: 4,800 mm, fuel type: electric, mast type: other, overall weight: 4,950 kg, Der Merlo E-Worker 25.5-90 Schwerlast-Teleskopstapler ist eine vielseitige Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 4,80 Metern und einer maximalen Traglast von 2.500 kg bewältigt er auch schwere Lasten problemlos.... Fsdszqb Diepfx Am Esgi Der Merlo E-Worker 25.5-90 Schwerlast-Teleskopstapler ist eine vielseitige Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 4,80 Metern und einer maximalen Traglast von 2.500 kg bewältigt er auch schwere Lasten problemlos....