Used Mikron Wf 1 for sale (180)

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 Nsdpfx Aet Hw D Regzjlh _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Year of construction: 1990, condition: used, x-travel 450 mm y-travel 400 mm z-travel 400 mm control Heidenhain 355 cooling total power requirement 4 kW weight of the machine ca. 2,4 t dimensions of the machine ca. m Nlsdpopxrknjfx Agzsh

Condition: good (used), rotary table, rotary indexing table, dividing head, NC rotary table, fourth axis, 4th axis, C-axis Nedpfekvrqfex Agzjlh -Manufacturer: Mikron, NC rotary table type SMP from CNC milling machine Mikron WF 51C/155 -Clamping surface: Ø 630 mm -Groove width: 14 mm -Motor: Siemens 183V 1.8 kW type HU3078-0AC01 -Encoder: Heidenhain Type ROD 250 18000 02S09-04 -Dimensions: 630/630/H495 mm -Weight: 409 kg

Condition: used, Empty weight: 2.000 kg Dimensions (LxBxH): 245 x 210 x 186 cm - Drive system: CNC - Control system brand: Heidenhain - Control system type: TNC 114 - Number of axes [pcs]: 3 - X-axis travel [mm]: 560 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 560 - Table length [mm]: 750 - Table width [mm]: 425 - Tool holder: ISO40 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 4000 - Options: Digital readout - └ Type of digital readout: Heidenhain TNC 114 - Documentation available: Yes - Transport dimensions: 2450mm x 2100mm x 1860mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nledownhqtepfx Agzjh Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 956.71.80.288, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, controller model: HEIDENHAIN TNC 150, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a site closure. Placing a bid constitutes a binding commitment to collect the item on time between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Travel X-axis: approx. 300 mm Travel Y-axis: approx. 300 mm Travel Z-axis: approx. 300 mm Tool holder: SK 40 Table dimensions: 1,000 x 500 mm, with 7 T-slots MACHINE DETAILS Control: HEIDENHAIN TNC 150 Electrical Data Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Connection: 10.5 kW Nledpfx Agexqg Itszsh Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 2,200 mm Weight: 2,000 kg EQUIPMENT Documentation Collets Gauge block set

Condition: good (used), Complete specifications can be found in the photos of the listing. CNC HEIDENHAIN 426. The machine is in excellent mechanical condition. Nsdpfx Ajxl Htfjgzjlh

Condition: excellent (used), MIKRON WF 3 DP universal milling machine TECHNICAL DATA Angular table Nsdpfolnfggox Agzelh clamping surface: 450 x 800 mm number of T-slots: 9 T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Milling spindle drive spindle speed: 21 steps speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Feed drive Feed rates in all 3 axes: Infinitely variable Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table (Z axis): Automatic: 385 mm For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: good (used), Universal Tool Milling Machine Mikron WF2SA Year of manufacture: approx. 1990 Heidenhain Aktiv – Digital Display TNC 114 Infinitely variable feed Machine lamp Coolant system Machine feet Travel: X 420 mm Y 250 mm Z 345 mm Spindle speed: 50 - 2240 rpm Clamping surface: 635 x 250 mm Feed speed on 3 axes: 0 - 750 mm/min Rapid traverse on 3 axes: 1400 mm/min Spindle taper: ISO 40 Vertically/horizontally extendable quill Central lubrication Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg Njdoxlq N Dspfx Agzslh The machine is in good, fully functional condition. Videos of geometry inspection can be provided upon request. New oil sight glasses fitted on the Y axis. Backlash X axis: 0.1 mm Backlash Y axis: 0.15 mm Backlash Z axis: 0.3 mm Price: net, ex-warehouse, loaded.

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Nsdpfsw A Af Isx Agzslh Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Year of construction: 1987, condition: used, machine/vehicle number: 152.41.74.002, table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm Njdpfj H I Hdox Agzslh weight: 3100 kg control: HEIDENHAIN, TNC 155

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Nlodpfx Agsxcxz Nszeh

Condition: used, functionality: fully functional, Universal Milling Machine Mikron WF 3S with 3-axis Heidenhain TNC 114 digital readout and infinitely variable feed Technical Data: >> Year of manufacture: approx. 1990 Nodpfxjw Ni Ris Agzslh >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed on 3 axes from 1 to 750 mm/min >> Rapid traverse on 3 axes: 1400 mm/min >> Travels X/Y/Z: 500/500/380 mm >> Vertical quill - SK40 extendable >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active digital readout Heidenhain TNC 114 >> Central lubrication >> Operating manual, programming manual, electrical diagrams About the Machine: For sale is a used Mikron WF 3S universal milling machine. It features a Heidenhain path control TNC 114, which means it can move to a programmed dimension in any chosen axis (X, Y, or Z) and stops automatically upon reaching it. Four different zero points can be set, and dimensions can be entered as absolute or incremental values. The feed rate is infinitely adjustable from 0–750 mm/min, and can also be regulated during machining. Rapid traverse can be activated at the push of a button, while spindle speed is step-adjustable from 50 rpm to 2240 rpm, but only adjustable when the machine is stationary. The vertical milling head is mounted with three bolts and can be removed and reattached in just 2 minutes. It is hand-fastened using the swing arm seen on the left side of the machine and can be simply swung aside. A key feature of the machine are the large travel distances relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Additionally, the machine is equipped with electronic protection for the vertical spindle. Both mechanically and electrically inspected. Take the opportunity to inspect and test the machine under power on site.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 30 rpm, total height: 1,750 mm, total width: 1,790 mm, total length: 1,375 mm, table width: 450 mm, table length: 800 mm, overall weight: 1,450 kg, The milling machine is connected to the network and can be inspected by appointment. Very good condition. Nledpoxbtaqsfx Agzsh Accessories: 10 tool holders SK 40 1 hydraulic machine vice with Heidenhain path control.

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] Nodpfx Asuhbxajgzjlh EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm Nledpfou U Sabex Agzsh z-travel 380 mm total power requirement 2,6 kW weight of the machine ca. 1,5t t

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m Nedpfx Aetv Ia Togzolh • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Nsdpfx Agotuwk Uszslh

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Nodpfxewit Rho Agzjlh Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 1986, operating hours: 66,247 h, functionality: fully functional, travel distance X-axis: 600 mm, The machine is in good condition and still in operation. Year of manufacture: 1986 Process: X 600 / Y/Z 500 On-time: 66,247 hours Remarks: - The price does NOT include any accessories! - Pickup by buyer, from the site. - Pickup date will be agreed upon by the seller. - No warranty Nedpfx Aewccfhogzolh - Advance payment (invoice) or cash upon pickup

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Nlodpfjrywgzex Agzjh Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Trasfor, transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see photo identification plate Nledpfx Aokzpmusgzeh -Dimensions: 180/160/H215 mm -Weight: 25.5 kg

Year of construction: 1988, condition: ready for operation (used), Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich. Nledev Sct Sjpfx Agzjh

Condition: good (used), functionality: fully functional, 1 used tool milling machine Micron brand Type WF 2/3 DP with Heidenhain Type 135 linear motion control Travel X/Y/Z 400/410/400 mm Table clamping area 800 x 450 mm Speed 30 – 2240 rpm Feed rates 1 – 750 mm/rev Rapid traverse 2000 mm/min Tool holder ISO 40 Machine weight approx.: 1.4 t Space required approx.: 2.1 x 1.6 x 2.2 m Nsdev N Dzfspfx Agzelh

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer Nlsdpfxekzpm He Agzsh -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Condition: ready for operation (used), Steuerung: HEIDENHAIN TNC 150. Nlodpfx Asgtiaajgzsh