Used Mobile Column Lifts for sale (33,672)

Condition: good (used), Column jib crane, overhead crane, workstation crane Ibjdpfx Ajxwt Nwod Ded -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm, requires no foundation -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2690 mm -Swivel range: 270° -Chain hoist: Demag type DCM-PRO 2 250 H2.8 V -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 540 kg

Condition: used, lifting height: 32,500 mm, Year of construction: 2019, operating hours: 2,110 h, Weights Empty weight: 13.700 kg Functional Lifting capacity: 15.500 kg Identification Serial number: AMC3919 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 3500 Transport dimensions (LxWxH): 5.83x1.84x2.83 Ijdpfexwi Suex Ad Djbd Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, x-travel 10.000 mm y-travel 2.000 mm z-travel 1.500 mm Control Heidenhain spindle tunring speed 4.500 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine is supplied WITHOUT a milling head and WITHOUT a worktable. Ijdpfx Adoxwzhho Djbd 40-position tool changer is non-functional. Technical features & accessories: - Internal coolant supply 15 bar - Chip conveyor Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 230 kg, construction height: 2,180 mm, fuel type: electric, total length: 1,880 mm, drive type: Elektro, construction width: 760 mm, working height: 8,000 mm, Scissor lift Condition: New device Technical condition: New Iedpfxexwz Hde Ad Djbd Front tyre type: Non-marking solid (cushion) tyres Battery type: PzS Battery year of manufacture: 2025

Condition: used, Year of construction: 2015, swing diameter 1.500 mm mm faceplate diameter 1.250 mm mm control Siemens 840 DSL tool taper 4 Stk. turning height 1.250 mm mm total power requirement / kW weight of the machine ca. / t dimensions of the machine ca. / m Ibsdpfx Adsnp Uhrj Djd

Condition: excellent (used), Column drilling machine FORMAT SB25 V-6 Drilling capacity (steel): 25 mm Chuck: 3-16 mm Taper: MK3 Speeds: 160-2340 rpm (stepless) Table size: 480x400 mm Ijdpfjxw R Nujx Ad Debd 2 motor stages Right/left rotation Thread cutting device The machine is in impeccable condition and ready for immediate use.

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm, requires no foundation -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2680 mm -Swivel range: 270° -Chain hoist: HADEF type CH1 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 550 kg Ibedpfxexwtw Us Ad Dod

Condition: used, lifting height: 30,500 mm, Year of construction: 2018, operating hours: 2,376 h, Drivetrain Drive: Wheel Weights Empty weight: 13.700 kg Functional Lifting capacity: 15.500 kg Isdpfxoxwi Sho Ad Djbd Identification Serial number: AMC3588 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 0 Transport dimensions (LxWxH): 5.83x1.84x2.83 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm Ibjdpsuddnvofx Ad Ded faceplate diameter 3700 mm turning height Max. 2600 mm workpiece weight Max. 35 t Power 80 PS DIGITAL CONTROL DISPLAY Largest diameter with the crossbeam supports: 4200mm Largest turning diameter with side support: 3900mm Largest turning height above faceplate: 2500 Side support 1 vertical grinding ram: 1200mm stroke (out of operation) 1 turning ram: 1400mm stroke

Condition: excellent (used), Extraction / Mobile dust extractor Vacumobil EA160A Extraction diameter: 160 mm Year of manufacture: 2006 Weight: 310 kg Rated air flow: 2050 m³/h Ijdpfx Aorbiiwsd Dobd Minimum air flow: 1447 m³/h 3.4 kW Automatic, motor-driven filter cleaning

Condition: used, faceplate diameter 1.200 mm Ibjdpfx Adsnp Uhco Djd swing diameter 1.500 mm turning height 1.300 mm side head - cross travel 550 mm slide adjustment 800 mm control Heidenhain Positip 855 total power requirement / kW weight of the machine ca. / t dimensions of the machine ca. / m

Condition: new, The KB 20 SV is a state-of-the-art Column Drilling Machine in the KB SFV Series, designed for robust performance in any workshop setting. This high-quality drill press excels in light drilling tasks, featuring a modern design with a precision-ground work table and an infinity variable drive that is virtually maintenance-free. Equipped with a user-friendly touchscreen control panel, operators can easily switch between drilling and thread-cutting functions, which enhances productivity for both single part productions and manual series batch jobs. The machine includes a powerful, quiet motor and a reliable belt drive, ensuring superior rigidity and performance under high loads. Standard equipment such as an integrated LED work lamp, drill chuck, and tool-holder bits enhance usability. With a drilling capacity of 20 mm and sturdy construction, the KB 20 SV is an excellent choice for anyone looking to optimize their Column Drilling Machine operations. Order online today to experience the efficiency of KNUTH machines in your facility. Ijdpeu E Nduofx Ad Dsbd

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Ibedpfxjv Tp D Ts Ad Dod Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil - Adjustable fixed stop - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition

Condition: used, Year of construction: 1998, Lifting capacity: 70.000 kg Serial number: SC070-1318 Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 0 Transport dimensions (LxWxH): 0x3.18x3.12 Please contact PFEIFER GROUP for more information Ijdpfsxwi R Rex Ad Djbd

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Ijdpfx Ajxwdyged Dsbd Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: good (used), Manufacturer: EXNER Type/Model: EXSB 150 Serial No.: 10473 Year of manufacture: 03/2002 Press force: 1,500 kN Power: 41.81 kW Tool dimensions: 1,400x1,200 mm Iedpfxjxwmdhe Ad Dsbd

Condition: used, faceplate diameter 1.400 mm swing diameter 1.600 mm Iodpfx Adsnp Uhnj Djbd turning height 1.500 mm control Siemens 840 D workpiece weight 6.500 kg feed 3.600 mm/min. slide adjustment 1.000 mm turning speeds 10-315 mm/min. total power requirement / kW weight of the machine ca. / t dimensions of the machine ca. / m

Condition: ready for operation (used), Ixion BS 23 STG with thread cutting device Iodpfx Adjxvzw Te Debd

Condition: used, Single-column hydraulic press HIDROLIKSAN model C-Type 100 Serial no. C100UT16/16 Year of manufacture: 2016 Pressing force: 100 tons Ram stroke: 400 mm Throat depth: 400 mm Daylight (installation height): 495 mm Ijdpfxsxf Uqrs Ad Dobd Table size: 900 x 700 mm Ram area: 900 x 700 mm Max. tool weight: 500 kg Table height above floor: 1,000 mm Max. hydraulic operating pressure: 240 bar Hydraulic tank capacity: 180 liters Rapid approach speed: 30 to 100 mm/sec Pressing speed: 3 to 10 mm/sec Return speed: approx. 100 mm/sec Drive power: 11 kW Power supply: 400 V, 50 Hz - Table and ram with 18 mm T-slots - Operation via two-hand control console or manual control - SIEMENS S7 1200 control with Simatic HMI touch panel - SICK Flexi Soft safety control - SICK light curtain as reach-in protection in safety mode - Programmable ram stroke, pressing force, and stroke speed via control - Pressure and position shut-off - Pressure holding time infinitely programmable - Ram equipped with direct linear measuring system - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Approx. 2,496 operating hours - UVV safety for manual loading, last inspection October 2024 Required installation space (L x W x H): 2,300 x 1,700 x 2,750 mm Weight: 8 tons Very good condition

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Vertical Turret Lathe - Single Column / Brand: JUNGENTHAL / Type: JU 25 Year of manufacturing: 1980 / Modernized: 2016/2017 The modernization of the JUNGENTHAL control system included: - CNC control system, - feed and spindle motor with controller, - control panel, - measuring systems, - control cabinet, - wiring & sensors, - software, - documentation. The machine can be inspected under power by appointment. Condition: Operational / ready for use. TECHNICAL DATA: CNC Control: SIEMENS SINUMERIK 840D sl Working area: - Turning diameter max.: 2.780 mm - Height with tool max.: 1.725 mm - Height with special holder max.: 1.820 mm - Height without tool max.: 1.995 mm Faceplate: - Diameter: 2.500 mm - Load capacity max.: 20 tons - Speed: 0,63 : 150 rpm Ram: - Stroke max.: 1.000 mm - Diameter: 280 mm - Feed: 0 : 1.000 mm/min - Rapid speed: 5.000 mm/min Travels: - Crossbeam: 1.500 mm - X-axis: 1.800 mm - Z-axis: 1.000 mm - Total power requirement approx.: 80 kW - Machine weight approx.: 55 tons ADDITIONAL EQUIPMENT/ ACCESSORIES: Grinding device: - Speed max.: 1.500 rpm - Height from the faceplate max.: 1.320 mm Tailstock: - Height to tip max.: 1.565 mm - Height between peaks max.: 1.530 mm Automatic tool changer (automatically clamping of holders in the ram): - Magazine with 6 positions - Claw boxes - Documentation - Various tools, accessories ... There is no guarantee for correctness and completeness of the technical details Ibjdpjxwl Sdofx Ad Ded and accessories. - Subject to prior sale -

Condition: used, lifting height: 25,200 mm, Year of construction: 2016, Weights Empty weight: 12.200 kg Functional Lifting capacity: 6.000 kg Identification Ijdpfxexvk Tks Ad Dobd Serial number: AMC2055 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 0 Transport dimensions (LxWxH): 5.86x2.32x2.65 Additional information Please contact PFEIFER GROUP for more information

Condition: reconditioned (used), Year of construction: 2016, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,300 mm, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, spindle speed (max.): 7,000 rpm, spindle speed (min.): 20 rpm, table length: 8,000 mm, table width: 1,100 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Year of manufacture: 2016 Capacities / Travel distances: Longitudinal (X): 6,500 mm Vertical (Y): 1,800 mm Cross (Z): 1,300 mm Table size: Length: 8,000 mm Width: 1,100 mm Number of T-slots on the table surface: units: 7 Width of T-slots: 22 mm Distance between slots: 140 mm Isdsxvx Amepfx Ad Dobd Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup Blue) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Type A Main drive: Drive power: 100% duty cycle 43 kW Spindle speed range: Max. spindle speed: 20 – 7,000 rpm Torque: 900 Nm Feeds: X, Y, and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y, and Z axis 35,000 mm/min Base area SLP8000: (without enclosure) 13.0 x 4.5 m Overall height: approx. 4.4 m Weight: approx. 34,000 kg Heidenhain TNC 640 HSCI Automatic milling head, Diagonal H207 Adapter angle milling head SK50 with Hirth gearing Automatic tool changer, 60 magazine places Chip conveyor Preparation / integration of NC rotary table Adaptive control ACCURA HEADS Coolant system 2 RepairFIT is our proven solution for a profitable entry into our product lines. The machines offered in this line are procured by us through a strict selection process and undergo a thorough inspection (Deep-Dive Check). After intensive cleaning, any identified defects or faults are professionally repaired by our expert service team.

Condition: used, faceplate diameter 1.000 mm swing diameter 1.400 mm turning height 1.100 mm turning speeds 500 U/Min. U/min control Siemens 840 DSL Shop Turn slide adjustment 1.000 mm x-axis 2.000 mm z-axis 700 mm mm rapid traverse 6.000 mm/min. m/min total power requirement 62 kW weight of the machine ca. / t Iodpfx Adenp Uhkj Dsbd dimensions of the machine ca. / m

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW FLOOR TYPE MILLING MACHINE Control and Motors: Two HEIDENHAIN TNC 640 digital CNC controls – one at the machine’s front, one at the rear in the cabin HEIDENHAIN package (motors, measuring systems and portable handwheel) Additional equipment: Tool changer with double gripper, 60 stations Double hinge-belt chip conveyor (longitudinal), one in front and one at the rear Accuracies: Positioning accuracy: ±0.040 mm Ibedovrv Sujpfx Ad Dod Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Technical details faceplate diameter 3500 mm swing diameter 3800 mm turning height 750 mm Control Siemens 840 D sl Additional information CNC vertical lathe with one turning spindle and two tool carriers on two cross slides The machine has been regularly serviced by the manufacturer and is in mint condition. Technical specifications: Max. swing diameter 3800 mm Max. working height 750 mm Slide travel X1 axis approx. 2800 mm Slide travel X2 axis approx. 3200 mm Slide travel Z axis 1000 mm Rapid traverse X/Z axis 32/20 m/min. Faceplate (turning spindle unit with motor spindle): Speed 100 rpm Torque 67,000 Nm at 40% duty cycle Drive power 200 kW at 100% duty cycle Load capacity (chuck, clamping jaws, and workpiece) 35,000 kg Tool carrier: Double tool holder, Capto C8 For internal and external machining Speed range up to 6000 rpm. Torque approx. 120 Nm at 100% duty cycle Direct coolant supply to the tool holders Iodpoxqn Nrsfx Ad Dobd Double tool holder with swivel axis For turning and drilling (MFU) in conjunction with a tool magazine Equipment: CNC control Siemens 840 D sl Chuck Röhm lever chuck KFG 3500/3/6/12 25-station tool magazine, left of the work area 41-station tool magazine, right of the work area Max. tool diameter 150 mm Max. tool weight 20 kg Tool length 400 mm Tool cleaning with air Chip conveyor Coolant system 6 bar, 80 l/min. Knoll paper belt filter High-pressure coolant pump 70 bar