Column lifter buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
"Column swiveling crane with vacuum lifter DALMEC PARTNER EQUO PEF Carrying capacity kg: 120 Number of suction pads: 8 Stroke mm: 2.450 Gyayg0e2 Column swiveling crane: Yes Throat mm: 4.000 Horizontal panel transport: Yes For panels: Yes Operating status: dismantled/ stored" more
6
Type of fuel: Electric Height: 196 cm Fork length: 1.150 mm Lift height: 160 cm Demo-machine, only 3 operation hours, Bbqmw7tw9z Tyres: Vulkollan more
3
faceplate diameter:2800 mm swing diameter:3500 mm turning height:2315 mm faceplate turning speed range:2,1 - 1112 U/min max. workpiece weight:12.000 kg feeds:0,044 - 8 mm/U ram head - vertical travel:1000 mm ram head swiveling:+/- 45 ° turret head - vertical travel:800 mm total power requirement:50 kW weight of the machine ca.:35 t Mljuf dimensions of the machine ca.:5,2 x 4,4 x 5,1 m with two vertical heads more
3

Single Column Press - Hydraulic EITEL TP 4 S

Düsseldorf Halle 1Germany dealership location
6394 km
1967
used
pressure 4 t throat 140 mm stroke 190 mm distance between table / ram mm table height over floor 880 mm table surface area 200 x 300 mm hole in the table mm height over floor 2000 mm voltage 380 V weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 1 x 2 m Ljixp more
6
faceplate diameter 8000 mm swing diameter 10000 mm turning height 6500 mm spindle adjustment 3500 mm max. turning diameter between columns 10250 mm workpiece weight 350 t power capacity 110 kW feeds 72 mm/min rapid traverse 2000 mm/min faceplate turning speed range 0,07 - 18,7 U/min cross rail adjustment 6000 mm Control NUM 1060 total power requirement 250 kW weight of the machine ca. ca 350 t dimensions of the machine ca. 14,3 x 9,6 x 12,5 m 2013/2014 complete overhauled and new Electric an... more
6

Punching Automatic - Single Column SIBIU PAR 25 A

Bünde bei BielefeldGermany dealership location
6460 km
1975
used
pressure 25 t sheet width 250 mm 9zsruzhbz throat 210 mm stroke 10-100 mm table-size 560 x 400 mm double strokes/min. 180 Stück table adjustment - upper 190 mm total power requirement 3 kW weight of the machine ca. 2,25 t dimensions of the machine ca. 1,1 x 1,4 x 2,33 m Condition: ready for operation Double-column eccentric press with transverse shaft, wheel guard, electro-pneumatic drive, adjustable stroke and ram, adjustable table. Roller feed: band feed length 0-125 mm, max. Band thickn... more
5
drilling performance in steel 50 mm Eqblwwt drill spindle holder MK 4 thread cutting device stroke of sleeve 250 mm outreach 335 mm 12 spindle speed steps  45 to 850 rpm 9 infeed steps 0.056 to 1.8 mm/rotation stroke of headstock 200 mm adjustment of table height 300 mm table clamping surface 480 x 560 mm cooling liquid device electrical data 380V / 4.1 KW space required height - 2,350 x width - 900 x depth - 1,100 mm solid steel plate under machine foot 1,000 x 1,200 mm weight ap... more
4
faceplate diameter:3500 mm swing diameter:5900 mm turning height:1300 mm Mxnpn slide stroke:900 mm faceplate turning speed range:0,1 - 30 U/min total power requirement:70 kW weight of the machine ca.: t dimensions of the machine ca.: m CNC HEIDENHAIN TNC 145 CS 2 Ram´s more
5
pressure 300 t Bzslaxr passage width 1300 mm stroke 300 mm table surface area 1250 x 900 mm dimension of ram 1250 x 900 mm ram adjustment 250 mm no. of strokes 20 - 25 Hub/min dayligth 500 mm band width 420 mm sheet thickness - max. 6 mm feed length 400 mm voltage 380 V total power requirement 50 kW weight of the machine ca. 40 t dimensions of the machine ca. 2,8 x 2,0 x 5,9 m with decoiler, make SCHLEICHER with straightener, make GEORG, model RMB 400 with feeder, make FREI more


column lif...
every day

New machines via email!

Be informed!
1
x-travel 10250 mm y-travel 5320 mm z-travel 800 mm w-axis 2900 mm table-size 10000 x 4000 mm distance between columns 5000 mm workpiece weight 40000 kg distance table - lower edge spindle 3500 mm Bbcxc0akll spindle diameter 100 mm diameter of quill 330 mm spindle turning speed range 30 - 4500 U/min spindle taper ISO 50 spindle motor 30 kW feeds x/y/z -stepless 1 - 6000 mm/min rapid travel x/y/z 10/20/8 m/min Control Fanuc 31i total power requirement 100 KVA weight of the machine ca. 130 t dim... more
5

Eccentric Press - Single Column SCHULER PDr 63/250

Bünde bei BielefeldGermany dealership location
6460 km
1964
used
pressure 63 t throat 250 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke down, adjustm. up 315 mm table surface area 710 x 500 mm hole in the table 250 mm table height over floor 800 mm 32ywznsjj passage to the back 290 mm ram surface 450 x 280 mm slide drill hole x depth 40 x 80 mm ram adjustment 63 mm operating pressure 4,9 bar power requirement 5,5 kW weight ca. 3,6 t dimensions 1,4 x 1,5 x 2,6 m Electric 380 Volt Foot switch Machinefeets Double-walled ec... more
4

Planer-Type Milling M/C - Double Column MATTEC 80-30-60

Werksstandort, unter StromGermany dealership location
6390 km
2015
used
x-travel 8500 mm y-travel 4400 mm z-travel 1600 mm Control Heidenhain iTNC530 surface area 10000 x 3200 mm rapid traverse 20 m/min spindle turning speed range 4000 U/min Torque 1000 Nm Yrrrlg tool taper ISO 50 number of tools 61 total power requirement 60 kW weight of the machine ca. 62 t Portal milling machine Mattec 80-30-60 - spindle hours approx. 980 hours - Main spindle drive air-cooled - Lubricated and cooled two-stage gear-oil circulating air -> 1st stage - 1000 Nm in S6 operation... more
2
x-travel:6000 mm y-travel:1000 mm z-travel:1000 mm spindle drive:15 kW table-size:8000 x 1200 mm rapid speed:10 m/min Uci3av2ea spindle speed:10-2000 U/min dimensions of the machine ca.: m weight of the machine ca.:35 t Used CNC traveling column milling machine with CNC control of NUM 1060 Further technical data and accessories, as defined in Appendix. Warranty: no Take advantage of the favorable leasing and rental conditions of ABC Leasing. Ask us about it. Upon request we can organize ... more
5
faceplate diameter:2800 mm swing diameter:6000 mm turning height:2500 mm faceplate turning speed range:2,12 - 112 U/min max. ram stroke:1000 mm max. workpiece weight:60.000 kg feeds:0,71 - 128 mm/min rapid traverse:2 m/min total power requirement:65 kW weight of the machine ca.:55 t dimensions of the machine ca.: m 02p977u3d DRO Heidenhain more
4
faceplate diameter 914 mm swing diameter 1166 mm turning height 942 mm distance between table and cross rail 673 mm table load 8 t ram head - cross travel 640 mm faceplate turning speed range 11 - 466 U/min transmission ratio 4 rapid traverse 5000 mm/min feeds infinitely variable 0 - 400 mm/min voltage 380 V main drive DC 42 kW control SIEMENS 820T total power requirement 65 KVA weight of the machine ca. 9,5 t dimensions of the machine ca. 2,3 x 2,4 x 3,8 m - in 1989 Machine overhould and r... more
6
drilling performance in steel 50 mm drill spindle holder MK 4 7qq00uwvx thread cutting device stroke of sleeve 250 mm outreach 335 mm 12 spindle speed steps  45 to 850 rpm 9 infeed steps 0.056 to 1.8 mm/rotation stroke of headstock 200 mm adjustment of table height 300 mm table clamping surface 480 x 560 mm cooling liquid device electrical data 380V / 4.1 KW space required height - 2,350 x width - 900 x depth - 1,100 mm solid steel plate under machine foot 1,000 x 1,200 mm weight ... more
3
pressure 25 t throat 250 mm stroke 150 mm straightening stroke 20 mm dayligth 870 mm ram hole 50 mm power capacity 3,0 kW table height over floor 510 mm total power requirement 3,0 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 0,75 x 1,30 x 2,10 m S2jsmh - Fabr.-No.: 11945 - UVV till 09/2016 - Machinelamp more
4
Pressure total: 315 ton Ram stroke: 400 mm Ram adjustment: 400 mm Cxxj9zg Shut height (stroke down, adjustment up): 750 mm Free frontal opening L-R: 2.510 mm Table surface area : 2.500 x 1.400 mm Ram surface area: 2.500 x 1.400 mm Cushion capacity in table: 63 ton Cushion stroke: 1650 mm Number of strokes: 25 [...] Required power: 55 kW Height over floor approx.: 6.650 mm Weight of machine approx.: 68 ton more
6

Eccentric Press - Single Column SCHULER PDr 63/250

Bünde bei BielefeldGermany dealership location
6460 km
1964
used
pressure 63 t throat 250 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 315 mm table surface area 710 x 500 mm hole in the table 250 mm table height over floor 800 mm passage to the back 290 mm ram surface 450 x 280 mm slide drill hole x depth 40 x 80 mm ram adjustment 63 mm power requirement 5,5 kW weight ca. 3,6 t Djtp70c dimensions 1,4 x 1,5 x 2,6 m Electric 380 Volt Safety-cover device Double-walled eccentric press with cross shaft, whee... more
5
faceplate diameter:2240 mm swing diameter:2500 mm turning height:1600 mm slides vertical travel:1200 mm workpiece weight:16 t horizontal adjustment:1390 mm angle adjustable from - to:+ - 30 Grad faceplate turning speed range:1,6 - 80 U/min main drive motor:65 kW total power requirement:70 kW C2ljnkm88 weight of the machine ca.:36 t dimensions of the machine ca.:5,4 x 5,1 x 5,0 m In 2008 complete overhauled with new electric with two vertical RAM´s 4-axes digital readout HEIDENHAIN 2 gear ste... more
6
x-travel 6600 mm y-travel 3200 mm z-travel 1000 mm w-axis 1750 mm spindle motor 55 kW spindle turning speed range 5 - 2000 U/min spindle taper ISO 60 spindle diameter in front bearing 170 mm table lenght 1 + 2 6400 mm table width 2250 mm daylight between the side columns 2650 mm table load 50 t no. of tools in the magazine 60 Stück distance spindle nose and table 2500 mm control SIEMENS 840D feed range - table 10 - 15000 mm/min feeds crossrail-slide horizontal 10 - 10000 mm/min feed in w - axe... more
2
Hydraulic single change press C-shape Pressure approx. 5 t 0eddjupp Throat depth: 175 mm Stroke: 255 mm Hydraulics: Bosch-Rexroth 130 bar Weight: approx. 500 kg Size: 2.15 x 1.05 x 0, 75 m sold only in EU - countries more
6
pressure: 30 t stroke: ca./approx. 20 mm strokes per minute: 200 - 1200 H/min Table surface area useable: B:350xH:330 mm ram adjustment: max. 50 (manual) mm ram surface area: 450x250 mm adjustment of stroke: keine / no stroke adj. mm dayligth: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 3,6 t transport dimensions LxWxH: 2,3x1,6x2,7 m automatic punching press-4 column mechanic transportation dimensions incl. electric cabinet S8wtki8ut [...] more
3
Pressure total: 350 ton Stroke: 900 mm Daylight: 1.400 mm Cxny0ff Table surface area : 2.000 x 1.400 mm Ram surface area: 2.000 x 1.400 mm Cushion capacity in table: 60 ton Cushion stroke: 200 mm Cushion area: 1.500 x 650 mm Approach speed: 500 mm / sec Working speed: 60 mm / sec Return speed: 450 mm / sec Stroke: 6.600 mm Weight of machine approx.: 58 ton more
1

Planer-Type Milling M/C - Double Column KRAFT/Skymaster VF1615A (Highspeed)

D-64589 StockstadtGermany dealership location
6564 km
2018
as good as new (ex-display)
x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 [...] rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach Pthgai max. tool diameter:100/130 mm max. tool length:300 m... more
4
pressure 10 t throat 160 mm stroke 0 - 60 mm table-size 410 x 310 mm hole in the table 148 mm dayligth 210 mm Ytzmvl9ew ram hole Ø 30 mm strokes per minute voltage 380 V total power requirement 0,85 kW weight of the machine ca. 650 kg dimensions of the machine ca. 0,80 x 0,90 x 1,70 m - [...]: R 50854 - foot switch more
4
x-travel 4000 mm y-travel 3000 mm z-travel 1200 mm c-axis 360 ° Qxajjlxkf b-axis 360 ° table load 35 t spindle taper ISO 50 spindle turning speed range 10 - 4000 U/min spindle motor 37/50 kW feeds longditudinal/cross/vertical 1 - 10000 mm/min rapid travel x/y/z 15000 mm/min spindle diameter in front bearing 140 mm distance table - lower edge spindle 1200 mm surface area 3500 x 1800 mm distance between columns 2300 mm max. torque on the spindle 2650 Nm control FIDIA M20 max. torque on the spin... more
1
x-travel 17000 mm y-travel 7000 mm z-travel 3000 mm w-axis 4250 mm table-size 16000 x 5000 mm distance between columns 5500 mm workpiece weight 300 t distance table - lower edge spindle 6250 mm spindle diameter 220 mm diameter of quill 630 x 630 mm spindle turning speed range 2 - 2000 U/min spindle taper ISO 60 Bblihrfwt3 spindle motor 150 / 120 kW max. torque on the spindle 13702 / 9134 Nm feeds x/y/z -stepless 1 - 10000 mm/min rapid travel x/y/z 12/12/10 m/min Control Fanuc 31i total power ... more
4
pressure: 63 t distance between columns: 900 mm S8v2y3cge no. of strokes: ca. 75 Hub/min ram adjustment: 80 mm stroke adjustable from - to: 3-100 mm Table dimensions: 900 x 600 mm throat: 310 mm dayligth: max. 350 mm drive power: 11 kW voltage: 380/220/24 V frequency: 50 Hz operating pressure: ca. 150 bar oil volume: 500 l safety distance: 150 mm passage opening in table: 200 mm total power requirement: 11 kW weight of the machine ca.: 4,0 t space requirements of the machine approx.: L:1,8 x B... more
5
Pressure total: 800 ton Ram stroke: 500 mm Ram adjustment: 500 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 3.160 mm Table surface area : 3.150 x 1.600 mm Ram surface area: 3.150 x 1.600 mm Cushion capacity in table: 160 ton Xlz3jvnh Cushion stroke: 200 mm Number of strokes: 14 [...] Required power: 90 kW Height over floor approx.: 8.000 mm Weight of machine approx.: 175 ton more
4
pressure unbekannt t throat unbekannt mm stroke unbekannt mm total power requirement kW Nsenwyjx weight of the machine ca. t dimensions of the machine ca. m more
4
pressure 100 t throat 325 mm stroke 20 - 140 mm table-size 890 x 580 mm hole in the table 300 x 300 mm dayligth 330 mm ram hole Ø 50 mm strokes per minute 55 / 100 1/min J7gvkj voltage 380 V ram adjustment 80 mm total power requirement 7,5 PS weight of the machine ca. 5500 kg dimensions of the machine ca. 1,30 x 2,10 x 2,70 m - Fab. No.: P4761964 - foot switch more
4
pressure:ca. 8 t throat:175 mm stroke:255 mm dayligth:500 mm Rfz3ck72 table-size:400 x 250 mm hole in the table:125 mm table height over floor: mm :3,0 kW oil volume:130 l oil pressure max. in the work cylinder:130 bar total power requirement:3,1 kW dimensions of the machine ca.:1,15 x 0,8 x 2,15 m weight of the machine ca.:ca. 1600 kg more
5
faceplate diameter:1400 mm swing diameter:1600 mm turning height:1200 mm max. ram stroke:700 mm Bbebrqa2f0 faceplate turning speed range -stepless-:4,5 - 250 U/min main drive motor:72 kW feeds:0,03 - 6,3 mm/U total power requirement:90 kW weight of the machine ca.:18 t dimensions of the machine ca.: m Machine geometrical overhauled in 2010 . 1 vertical 5-station turret head, with copying device 1 horizontal side head, with copying device 2-axes digital readout pneumatic 3-jaw power chuck spla... more
6
pressure: 30 t ram surface area: 450x250 mm ram adjustment: max. 50 (manual) mm dayligth: 400 mm Table surface area useable: B:350xH:330 mm strokes per minute: 200 - 1200 F3wx3mz adjustment of stroke: keine / no stroke adj. mm stroke: ca./approx. 20 mm mm total power requirement: 7,5 kW weight of the machine ca.: 3,6 t transport dimensions LxWxH: 2,3x1,6x2,7 m automatic punching press-4 column mechanic transportation dimensions incl. electric cabinet [...] more
1
x-travel:2100 mm y-travel:610 mm Mcihr z-travel:610 mm total power requirement:18,5/22,5 kW Unused machining center Microcut TC2100 with Fagor 8070. More information can be found in the appendix. more
4
pressure unbekannt t throat unbekannt mm stroke unbekannt mm total power requirement kW E9cyk0r7y weight of the machine ca. t dimensions of the machine ca. m more
6
Pressure total: 250 ton Stroke: 400 mm Daylight: 700 mm Table surface area : 1000 x 1000 mm Ram surface area: 1000 x 1000 mm Cushion capacity in table: 100 ton Cushion stroke: 100 mm Gf9ydxtbi Approach speed: 330 mm / sec Oil volume: 1500 l Required power: 40 kW Weight of machine approx.: 19 ton more
5

lifter GUK

LA-POSTPRESS - Showroom MuenchenGermany dealership location
6837 km
used
offer consists of: Mrapd - GUK lifter more
6
Tool holder MK 4 Stepless speed adjustment Bbouydkiqa Tachometer Automatic feed in 3 speeds more
6
pressure: 125 t stroke: 20-140 mm no. of strokes: 60 Hub/min daylight dimension : table/slide up: 480 mm throat: 350 mm strokes per minute: 55 passage: Dm=50 mm ram adjustment: 100 mm ram surface area: 750x600 mm clamping plate on table: 1200x700 mm distance between columns: 450 x 400 mm total power requirement: 11,0 kW weight of the machine ca.: 8,5 t space requirement approx.:: L:2,18x1,6x3,25 m transport measurements machine: 2,2x1,4x2,8 m - single / continous stroke - two hand control - ej... more
6

Eccentric Press - Single Column HENSEL EBU 50

Bünde bei BielefeldGermany dealership location
6460 km
1972
used
pressure 50 t throat 250 mm stroke 80 - 120 mm table surface area 650 x 515 mm ram surface 400 x 180 mm ram adjustment 70 mm 100 total power requirement 2,2 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,18 x 1,7 x 2,38 m Condition: ready for operation Ziq9y7d9 adjustable table additional shields Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
6
x-travel 630 mm y-travel 500 mm z-travel 630 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Wilklo9mn more
6
pressure 100 t distance between columns 625 / 300 mm stroke 8 - 100 mm table-size 950 x 550 mm ram surface 450 x 265 mm ram adjustment 65 mm no. of strokes 25 - 90 Hub/min dayligth 450 mm Bbidakjz3h total power requirement kW weight of the machine ca. 6,5 t dimensions of the machine ca. 1,1 x 1,75 x 2,48 m Press overhauled in 2015 and equipped with: -- Electrical overload protection -- Designed as a punching machine and has the operating mode -Setting up for two handed - Roll feed WL 20/8... more
5
faceplate diameter:2500 mm swing diameter:3300 mm turning height:2280 mm max. workpiece weight:30 t table speeds::1-150 U/min main drive:51 kW feeds:1-4.000 mm/min rapid speed:12/8 (X/Z) m/min Overall size:7.530 x 5.440 x 7.700 mm weight of the machine ca.:51 t Myco9 CNC controller:Siemens 840D automatic tool changer:12 fach more
6
grinding length 4.000 mm grinding width 800 mm workpiece height 700 mm control PDJ weight of the machine ca. ca. 21,5 t Bbpqkicvmq Equipment: Magnetic plate 4,600 x 500 mm Coolant system with paper band filter New electrical / control cabinet / control in 2001 various grinding wheels and flanges more
3
pressure: 630 t slide stroke: 900 pass through width: 3240 mm dayligth: 1800 mm die cushion stroke: 400 mm die cushion capacity: 250 t table-size: 3200x1900 mm clamping surface ram: 3200x1600 mm height over floor: 7000 mm Yt8tvyp8 work speed: 16-24 mm/sec rapid traverse - up: 400 mm/sec rapid traverse - down: 250 mm/sec total power requirement: 117 kW weight of the machine ca.: ca. 152 t space requirements of the machine approx.: Höhe: ca. 7,0 m double action drawing Press slide cushion stroke ... more
6
X ? Axis travel: 6.000 mm Y ? Axis travel: 2.500 mm Z ? Axis travel: 2.000 mm rotating range C-axis: 0° - 360° Control: Heidenhain TNC 426 distance between the columns: 3.000 mm Rapid travel: 13 m / min Ptnop3 Table plate: 6.000 x 2.500 mm Table load: 40.000 kg Spindle revolutions: 2.000 rpm Tool taper: SK 50 Required power: 60 kW Dimensions L x W x H: 17.700 x 7.810 x 6.805 mm Weight of machine approx.: 174 ton more
5
pressure unbeknt. t throat unbeknt. mm stroke unbeknt. mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m B7tgokvw more


column lif...
every day

New machines via email!

Be informed!

to

to

Change search
COLUMN LIFTER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close