Used Moulder for sale (714)

Condition: excellent (used), working width: 240 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 240 mm, working height: 160 mm, total width: 240 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, Weinig Unimat 1000 with grooved table Working width: 240 mm, working height: 160 mm, 5 spindles Spindle diameter: 50 mm Lrodozbz Ukjpfx Aglsr Spindle arrangement: 1-Bottom (7.5 kW) 7000 RPM 2-Right (7.5 kW) 7000 RPM 3-Left (7.5 kW) 7000 RPM 4-Top (7.5 kW) 7000 RPM 5-Bottom (5.5 kW) 7000 RPM Feed rate: 4 kW / 6-36 m/min, one driven roller in the table at the outlet.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, workpiece height (max.): 300 mm, type of input current: three-phase, workpiece width (max.): 220 mm, This machine is in very good condition, was not used as much as anticipated. Lrodpfxjzifmlj Agljr

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW Lredpfx Aezmxmmsglor

Condition: excellent (used), Year of construction: 1995, Tilting spindle moulder with long work tables and feed unit Lsdpjyynptsfx Aglerr Motor power: 5.5 kW, 400 V, 50 Hz Spindle speeds: 3,500/4,500/6,000/8,000/10,000 rpm with digital readout Useful spindle height: 180 mm Vertical spindle stroke: 155 mm Interchangeable spindle MK 5, diameter 30 mm Spindle tilting range: +45° / -10° Spindle height adjustment: electric with digital readout Spindle tilt adjustment: electric with digital readout Fence adjustment: manual with fine adjustment Spindle reversal (right/left rotation) CE compliant Extraction connection: 2 x 120 mm Working height: 860 mm Including round arch milling fence Including interchangeable spindle MK 5, diameter 25 mm Including interchangeable spindle MK 5, diameter 50 mm Dimensions (L x W x H) approx.: 2650 x 1250 x 1700 mm Weight approx.: 1000 kg HOLZHER feed unit 3 rollers 8 speeds Note for used machines: • Errors in technical details and prior sale reserved. • Stated prices are ex location—loaded free onto transport! • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (Please respond to enquiries only with your address and telephone number!)

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Lodpfx Aoiknp Reglorr Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: new, work table dimensions 2500 x 780 mm spindle DM 30 mm tilting of spindle +/- 45,50 usable spindle lenght 140 mm Max. tool DM under table 300 x 80 mm suction DM 1 x 120 & 2 x 100 mm Motor elektrospindel 7,50 kW elektro spindel with inverter for speed 900 to 12.000 RPM control panel with mit "Easy Touch 7" program "Flex"- fence with autom. adjustment via 'Easy Touch 7' left right turning of spindle table elongation front INCL. OPTIONS: - "Fast” table with autom. adjustment via 'Easy Touch 7' control Lrjdpfx Aed Etkhjgljr - version “LL” with 2 cast iron tables (2500 mm) Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2011, condition: ready for operation (used), A Hofmann tilting spindle moulder is offered. Table size X/Y: approx. 1200mm/815mm, working height: approx. 895mm, height adjustment: approx. 145mm, spindle tilt range: -45.5° to +45.5°, spindle diameter: 30mm, max. tool diameter: 250mm, spindle speeds: 3000/4500/6000/9000rpm, dust extraction ports: 2×120mm. Dimensions: approx. 1250mm/815mm/1700mm, weight: approx. 950kg. Inspection by appointment is possible. Lsdpfxjzl U Iqj Aglorr

Condition: excellent (used), LECEB S300 HIGH SPEED MOULDER INFEED CAPABLE OF FEEDING LONG AND SHORT BOARDS AT HIGH SPEED UP TO 3OOM/MIN+ SUITABLE FOR FEEDING SHORT LENGTHS DOWN TO 2.05M WITHOUT LOSS OF EFFICIENCY Ledpfx Agezmmrqjlerr SUITABLE FOR LENGTHS UP TO 6.0M SUITABLE FOR THICKNESS FROM 8MM+ SUITABLE FOR RECEIVING RESAWN BOARDS WHICH CAN BE AUTOMATICALLY LOADED TO THE MAGAZINE FOR HIGH SPEED FEEDING VERY SUITABLE FOR USE IN BETWEEN SPLITTING SAW MOULDER (OR RESAW) AND HIGH SPEED MOULDER

Condition: excellent (used), Year of construction: 1997, Very well-maintained 4-sided planer, with low usage. Maximum working width: 230 mm Maximum working height: 120 mm Spindle motor power: U: 5.5 kW L and R: 7.5 kW O: 5.5 kW Lodpfx Ajzlk U Hsglerr Equipped with Tersa planing heads.

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Lrjdpfsy S R Agjx Agler Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: good (used), Year of construction: 2001, Benier Wheat Bread Moulder - model B0-95 E Lredpfxszmva Ro Aglsr - year of manufacture: 2001 - extension belt length: 3 m - belt width: 500 mm - machine from production - technically operational - collection from warehouse - price on request

Condition: used, Year of construction: 2008, Overview This blowing machine was manufactured in 2009 by Italian manufacturer SIPA. The machine was part of a complete non‑returnable PET bottle filling line dedicated to juices production. It was used to produce small formats as 0.2 - 0.25 and 0.5 L PET bottles and operated at a nominal speed of 12,500 bottles per hour. The machine is described as being in perfect condition since it had been dedicated for a small private label production. The equipment becomes available as the seller has finished the production dedicated to fruit juices. Technical data - Capacity: 12.5000 bottles/hour - Year of manufacture: 2009 - Formats: 0.2 - 0.25 and 0.5 L - Application: Juices - Container material: PET - Neck finish: 38 mm - Air conveying system available Scope of supply Lredpfx Aozb Adtjgler - blow moulder Sipa SFR EVO 8 (2009) - preform feeding - preform container - preform tilting device - spare parts available - air conveying system available

Condition: used, Year of construction: 2011, Spindle swiveling: Yes, -45 to +45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling vice adjustment: Manual Height indicator: Mechanical counter Lrodpfjzdzbujx Agljr Swivel angle indicator: Mechanical counter Milling stop indicator: Mechanical counter Milling spindle diameter: 30mm / new milling spindle Spindle speeds: 1500, 3000, 4500, 6000, 9000 Motor power: 4 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1000mm Machine depth: 1200mm Weight: 580kg

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Ledpfsxqp Ngjx Aglerr

Condition: reconditioned (used), functionality: fully functional, 4 speeds: 3000/6000/4500/9000 rpm. Clockwise/counterclockwise rotation. Spindle lock via foot pedal. Milling stop with fine adjustment. Spindle diameter: 30 mm. Dust extraction at the top and bottom, each 120 mm. Ljdpfxjittnzs Aglsrr Spindle wrench. Open-end wrench, 41 mm. Cable + plug, 16 amps.

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Connected load 480V 42kW 108A, extraction connection 5x120 + 2x150 mm, 1x jointer unit, 2x vertical spindle units, 1x thicknessing unit, 1x universal unit top, 1x universal unit bottom, spindle diameter 40 mm, lubricant pump, pneumatically controlled pressure rollers, connection 6 bar, electric bridge adjustment, central lubrication, stepless feed via frequency inverter, total length 4200 mm, depth 2000 mm, height 1700 mm – as returned by customer Lrjdpfx Aex E T Dmsglor

Condition: reconditioned (used), Year of construction: 2000, machine/vehicle number: KK052469, functionality: fully functional, Connection value: 380V, 4kW Table size: 1070 x 620 mm Swivels with hand crank, 45° Height adjustment with hand crank Right/left rotation Motor brake Ljdpoiinm Hsfx Aglorr Socket for feed device Protective covers for handheld routers Spindle diameter: 30 mm Aigner stop Dust extraction connection: 2x 120 mm Speeds: 1400/3500/6000/8000 RPM Operating manual

Condition: reconditioned (used), machine/vehicle number: 591, functionality: fully functional, Motor power: 4 kW Table size: 800 x 800 mm Spindle diameter: 30 mm Dust extraction port: 120 mm Ljdeiw D Uhopfx Aglerr Handwheel for height adjustment Adjustable stop blocks Right/left rotation Spindle speeds: 3/4/6/9000 rpm No brake

Condition: reconditioned (used), Year of construction: 1966, machine/vehicle number: 662310, functionality: fully functional, Rated power at 380V: 3kW + 4kW Clockwise/counterclockwise rotation Star-delta switch Ljdpfoiw D N Dox Aglerr 2800/4500/6000 RPM and 5600/9000/12000 RPM

Condition: reconditioned (used), functionality: fully functional, Power consumption at 380V: 4.5 kW Table size (L x W): 1050 x 950 mm Dust extraction port diameter: 120 mm Lrsdpfx Aoiw D Upjglsr Spindle diameter: 30 mm Right/left rotation Electrical switch for two speeds 3 speeds Adjustable fence jaws

Condition: reconditioned (used), Year of construction: 1962, machine/vehicle number: 7867/162, functionality: fully functional, Power connection: 400V, 4.0kW Dust extraction connection: 1x Ø 100 mm, 1x rectangular 300x140 mm Spindle diameter: 30 mm Height adjustable via handwheel Spindle brake via pulley system Ljdpfx Agoh Ux Rwslerr Spindle locking via detent pin Right/left rotation 2 speeds Spindle not swivellable L x W x H: 1060 x 960 x 1100 mm Weight approx. 650 kg Unfortunately, we cannot respond to inquiries that do not include complete contact information.

Condition: not inspected (used), Milling fence with wooden fence cheeks, each 760 mm long 30 mm milling cutter arbor, incomplete Control panel on top Cable with 16 A plug 130 mm dust extraction diameter Ljdpsi Atftefx Agljrr Table 1000 mm wide, 800 mm deep Motor approx. 4 kW, total power consumption 12.5 amps Belt tension adjustment via handwheel Spindle height adjustment via handwheel Infeed cheeks individually adjustable via handwheel

Condition: ready for operation (used), Year of construction: 2023, WP Miniroll compact roll line with high capacity and maximum flexibility. The Werner & Pfleiderer MiniRoll Roll Line is a highly compact and efficient solution for the production of premium-quality small bakery products. Thanks to the integrated Multimatic dividing technology and built-in drum round moulder, this line delivers consistent product quality, excellent hygiene and impressive output – all within a minimal footprint. year of build 2023 only 51 working hours! suited for the production of: • Long-rolled rolls • Round rolls  5-row configuration with 600 mm working width Integrated Multimatic Pro G 2 dividing head, up to 150 gram Dividing range from 55 g to 150 g, measuring piston 55 mm Hourly capacity pieces/hour 3000 Built-in dividing and rolling head Motorized weight adjustment for consistent product results Manual pressure adjustment for precise shaping control Adjustable moulding belt and length-forming unit with pressure plate Resting time of 6 minutes Lredpox Thvmofx Agljr Suitable for trays 600×400, 600×800 and 580×980 mm Integrated storage for up to 3 rolling drums Automatic cleaning positioning Router for remote access

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 230 mm, planing height: 160 mm, planing width: 230 mm, working height: 160 mm, overall weight: 6,000 kg, power of feed motor: 5,500 W, rotational speed (max.): 12,000 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: electric, jointer table length: 1,800 mm, type of input current: three-phase, workpiece width (max.): 230 mm, input voltage: 380 V, warranty duration: 12 months, number of spindles: 6, power: 48 kW (65.26 HP), Equipment: motor brake, rotational speed infinitely variable, 6-HEAD PLANER/JOINTER, GN SERIES - 40 m/min + 3 NUMERICAL CONTROL AXES + POWERLOCK (HSK) GAU JING Width capacity: 10 - 230 mm Thickness capacity: 7 - 160 mm Infeed table: 1.80 m Arbor rotation speed: 6000 rpm - HSK 12000 rpm 3 Numerical control axes + POWERLOCK system Touchscreen Cast iron frame Motor no. 1 (planer): 7.5 kW Motor no. 2 (right cutterblock): 7.5 kW Motor no. 3 (left cutterblock): 7.5 kW Motor no. 4 (jointer): 11 kW Motor no. 5 (2nd jointer): 11 kW Motor no. 6 (3rd jointer): 11 kW Can be equipped with a control station to precisely measure the diameter of a tool after sharpening. Delivery and installation can be carried out directly on site. Lrsdpfxezkt S Ss Agljr

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control Ledpfoyy A Iqex Aglerr - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...