Spindle moulder

SCHNEIDER SK 2/4 II

Condition: used, Year of construction: 1986, Table milling machine Manufacturer: Schneider Type: SK2/4 II Year of manufacture: 1986 Technical data - 3,000 - 10,000 rpm - Runs in both directions (left/right) - with Haffner feed unit - including accessories Nedpfxezuyxas Almolf Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Surface planer: Working width: 520 mm, Table length: 2200 mm, Spindle diameter: 120 mm, Number of knives: 4 pcs. Thickness planer: Table dimensions: 520 x 850 mm, Feed rate: 6.5 - 17 m/min. Location: Supplier. Njdey Tpzqepfx Almolf

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Nedpfx Aoxqp Ngslmjlf

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Nedpfsi Dfidjx Almolf Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested Nsdpfx Asxdttislmelf - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: as good as new (ex-display), Year of construction: 2026, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Nsdpfx Aljuzkxxomslf Swivel angle display: Digital display Milling stop indicator: mech counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: reconditioned (used), functionality: fully functional, 4 speeds: 3000/6000/4500/9000 rpm. Clockwise/counterclockwise rotation. Spindle lock via foot pedal. Milling stop with fine adjustment. Nedpfsittnzex Almslf Spindle diameter: 30 mm. Dust extraction at the top and bottom, each 120 mm. Spindle wrench. Open-end wrench, 41 mm. Cable + plug, 16 amps.

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Njdpfx Asxq N T Eslmslf Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Condition: good (used), NHH lathe Type: 1N611N Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Njdpfxjqgdkio Almjlf Dimensions: 150x85x155 cm LxWxH

Condition: good (used), Year of construction: 1996, Woodworking machine, circular saw VEMA TKS LBM, year of manufacture 1996, with milling and drilling attachment. Data for milling and drilling attachment: Speed: 3,000 rpm, table size: 570 x 300 mm, drilling depth: 150 mm, drilling length: 210 mm, height adjustment: 170 mm, two-jaw chuck: up to 20 mm. Data for saw: Speed 3000-6000 rpm, blade up to 450 mm, cutting height up to 155 mm, bevel cut 0°-45°, table dimensions 1260x1100mm, width can be extended with a fence, length 2200mm, extra table 750x950mm. Nlodpfx Aehvaphelmef