Used Non Ferrous Separator for sale (10,930)

Year of construction: 2022, operating hours: 975 h, condition: used, functionality: fully functional, overall weight: 9,600 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0501, The MAGNETIC DRUM consists of a two-stage drum magnetic separation system designed to remove all magnetic particles from a material stream. Because the intensity of both magnetic drums can be selected and each drum can be activated or deactivated as needed, this module is highly flexible and can always be adapted to the specific properties of the feed material. The dual magnetic separation enables higher purity levels while maintaining constant throughput. This module is part of our rental fleet. Lodpfxsxt Dqqo Afzehb

Condition: ready for operation (used), 30 kw main drive 3250 rpm 1.2 kg /dcm. exelent conditions Lhjdpfjx Aurkex Afzob

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, The separating device from trio-technik is for sale. This unit is designed for the separation of objects with various geometries. Length: 950 mm Width: 700 mm Lhodpfjx Dm Rzjx Afzjb Height adjustable: 700-1380 mm Possible gap width: 50 mm Tilt angle: max 20 degrees Drive/three-phase current: 400V 50Hz Power consumption: 0.09 kW/h Speed adjustable.

Condition: repair required (used), Year of construction: 2007, Color separator Separation & Sorting Technology Gmbh Year 2007 Lodou Icgbspfx Afzehb Missing sensors Available catalog

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm Lhedpfxovyuy Hj Afzeb width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Material flow rate 1.8 m/s; Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Condition: excellent (used), Year of construction: 2014, AS-50211-Milk Clarifier 30 m3 /h Used SPX - Seital Self Cleaning Clarifier Type: SE51X Capacity min. 30,000 L/H Engine: 38 kW, 68A Complete Clarifier for milk Year of Production 2014 In many cases milk must be clarified on reception of the dairy to remove particles of dirt and somatic cells such as Leucocyte. This will reduce the presence of Listeria which is trapped inside the leucocyte The milk clarifier can operate Lsdpfjv Tk Sfex Afzohb with cold or warm milk. However, clarification efficiency improves at higher temperatures.

Condition: used, Lamella separator 2 pieces identical in construction: - Manufacturer and year of manufacture unknown (probably late 70s) - Rectangular design, with discharge screws to the funnel - Dimensions: Length 9700mm, width 3500mm, height 6100mm Lodpfst Ay Scjx Afzjhb

Year of construction: 1992, condition: used, Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Ljdpfob Swr Njx Afzohb Power: 125 m ³/h Speed: 1000 rpm KW: 2.7

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Ljdeppyhtspfx Afzohb Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: new, The ideal addition to your grinding/deburring machine (we also have the suitable deburring machine in stock!): Ulmatec Wet Separator Extracted materials: steel / stainless steel / aluminium, dry dust All water-contact parts made of stainless steel. Control via display. Motor: 7.5 kW, 400 V, 50 Hz, IE3 Max. airflow: approx. 11,000 m³/h Max. negative pressure: approx. 4,000 Pa Inlet diameter: Ø 355 mm Discharge: Drain valve Ljdpfx Afex Diiajzshb Filling: Automatic via solenoid valve Included: HEPA post-filter (for stainless steel processing) ATEX version (e.g. for aluminium processing) Excluding piping Maximum distance between extraction unit and machine: 10 m Connection to the on-site supply network is to be carried out by the customer.

Year of construction: 2020, condition: used, functionality: fully functional, Miltenyi Biotec CliniMACS Plus Magnetic cell separator 2020. The user-friendly key components of the CliniMACS Plus Instrument offer sophisticated applications for a whole variety of separations. The selected stem cells, monocytes, DCs, NK cells, B cells, and T cell subsets allow research in the field of regenerative medicine, adoptive immunotherapy, and graft engineering. Cells are magnetically labeled in the Cell Preparation Bag using an antigen-specific reagent. Subsequently, the Cell Preparation Bag is connected to the CliniMACS Plus Instrument. Intuitive software facilitates target cell enrichment or depletion as well as final collection in the Cell Collection Bag. The CliniMACS System separates large numbers of cells providing target cells with high purity and excellent yield. Lsdot E Hmrspfx Afzohb Electrical: 100-240V, 50/60Hz, 4 Amps, 350VA Good working condition. Please check out our other listings as well.

Year of construction: 2025, condition: new, functionality: fully functional, Cyclone LZA 800, heavy-duty version, incl. internal wear plate Diameter: 800 mm, total height: 2500 mm Lhedjxyzpwepfx Afzjb Designed for a volumetric flow rate of approx. 5000 m³/h Upper section of cyclone: - Diameter: 800 mm - Height: 800 mm - Material thickness: 3 mm - Internal wear plate: 5 mm (bolted) - Immersion tube Ø350 mm - Inlet nozzle Ø250 mm with beaded edge - Bolt-on flange t=6 mm - Coated in RAL 7035 light grey Lower section of cyclone: - Diameter: 800 mm - Height: 1500 mm - Material thickness: 3 mm - Outlet nozzle Ø300 mm with beaded edge - Bolt-on flange t=6 mm - 2 mounting brackets - Coated in RAL 7035 light grey Other cyclone models in both heavy-duty and light-duty designs, as well as accessories such as rotary airlocks, conveying fans, wind sifters, etc., are available on request.

Condition: used, Year of construction: 2020, functionality: unexamined, machine/vehicle number: 1739-596, rotational speed (max.): 4,800 rpm, Equipment: type plate available, Used disc stack separator for fermentation lees separation. Machine mounted on a complete skid with the option to purchase additional spare parts. Motor: 55 kW - 60 Hz. Belt drive. Permissible nominal bowl speed: 4,800 rpm. Minimum throughput: 8 m³/h; maximum throughput: 22 m³/h. Permitted feed product density: 1.16 kg/dm³. Permitted heavy liquid density: 1.1 kg/dm³. Permitted solids density: 1.3 kg/dm³. Maintenance tool set with ring spanner and compression tool included. Ljdpfxjxy R A To Afzshb

Condition: new, RSV Pipe Zone Compactor with Rotator – BRAND NEW UNIT The compactor is from 2023 and comes from our showroom. Compactor at the base is an RSV 50 Plate width: 340 mm Height without top plate: 1,987 mm Fitted with Rotator RX16- Including swivel joint for feed, return, and leak-oil lines Further specifications are shown in the attached images. HIGHLIGHT AND DESIGN RSV add-on compactors are engineered for excavator operating weights from 2 to 42 t. When operating with our RSV add-on compactors, you will effortlessly achieve your compaction targets. They enable optimal compaction even in hard-to-reach areas. Thanks to the smooth and well-balanced operation of the vibration unit, only minimal vibration is transferred to the excavator. RSV add-on compactors achieve deep compaction where other compactors reach their limits. MAIN APPLICATIONS • Civil engineering • Cable and pipeline construction Lhedpfxoxzflro Afzeb • Earthworks and structural engineering • Landscaping • Road and path construction The compactor can be equipped with all mechanical and fully hydraulic adapters Leak-oil connection required: Yes

Condition: good (used), Year of construction: 1991, machine/vehicle number: 1698 250, Milk skimming separator, capacity: 30.000 liter per hour. Ledsxxyc Tjpfx Afzshb Including all tools for maintenance.

Condition: refurbished (used), Year of construction: 2000, operating hours: 3,200 h, functionality: fully functional, fuel: diesel, Machine in excellent condition with low working hours, optional mobile bunkerconveyor (the one on the picture) available for extra. New conveyor belt cleaner. Lodpfevy A Ursx Afzehb

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Ledsv Aailepfx Afzjhb

Condition: used, Dust Cyclone, Dust Separator Overall dimensions: 2350 x 2100 x 5040 mm Cyclone diameter: 2100 mm Inlet side: 870 x 360 mm Outlet diameter: 635 mm Ledsxt Un Hjpfx Afzohb

Condition: used, Dust Cyclone, Dust Separator, Used machine Overall dimensions: 1200 x 1150 x 3270 mm Lodpjxt Tw Hsfx Afzohb Inlet side: 280 mm Outlet side: 250 mm Cylinder shell height: 800 mm

Condition: used, functionality: fully functional, The separator is for sale from the company trio-technik ; Filling via funnel with a plexiglass cover L: 900mm Ljdpfxsuhzvlj Afzshb W: 700 mm H: 700-1200mm Inclination max. 20 degrees Speed const. Discs can be adjusted

Year of construction: 2008, condition: used, machine/vehicle number: 51E361-010-02, IFE Processing Technology Lodpfxexztbho Afzshb Year of manufacture: 2008 For sale: 2 identical screens, each equipped with 2 unbalance motors. The price is for 1 screen.

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 6 kg, first registration: 10/2025, fuel type: gasoline, gearing type: mechanical, TITLE: USED FIXED (NON-DETACHABLE) STAINLESS STEEL ELLIPTICAL SINGLE-COMPARTMENT TANK WITH 2 TOP FILLING PORTS AND 1 DISCHARGE OUTLET. REF: 25-U-142 Lsdpexqty Aefx Afzehb TYPE: Tank DIMENSIONS OVERALL TANK LENGTH: 7.35 m TANK WIDTH: 2.50 m TANK HEIGHT: 1.60 m TANK CAPACITY: 20,000 L COLOR: Grey Subject to errors and/or omissions. Prices shown do not include VAT. Please contact our sales staff for the most up-to-date pricing and terms. For more information: Loris: +39 3484773001 URL: #theskipspecialists AURORA SKIP SYSTEMS operates in the sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. We specialize in trucks, trailers, and skip loader equipment. Over 50 trucks and over 150 bodies, containers with and without skip loaders, available for immediate delivery. E.&O.E. Due to the large volume of listings and detailed information, Aurora invites you to confirm the accuracy of the information provided with our sales staff.

Condition: good (used), Flaker Andritz K 1220 Ledoxw Eppjpfx Afzshb

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit Rinser | Krones | Variojet | 2002 | Rotary Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer Labeller | Krones | SV 360-10-113 | 2002 | Rotary Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats Palletizer | Krones | Pressant Compact 1N | 2002 Stretch wrapper | Robopac | Rotoplat | 2002 Air conveyor | Krones | Airco S | 2002 | For blown PET bottles Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles Pack conveyor | Krones | Multico S | 2002 | For product packs Pallet conveyor | Krones | — | 2002 | For pallet transport Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Lhsdpfxjxhf Hij Afzjb

Condition: good (used), Year of construction: 2007, functionality: fully functional, Granulator, separator for copper or aluminum cables. Feed rate: 9 m/min Lhsdpfx Afexxirwjzeb Capacity: 150 kg/h of granulated cable. Granules approx. 3 mm and a copper content range of 50%. 15 kW 400 V 50 Hz INSTRUCTION AND MAINTENANCE MANUAL AVAILABLE