Used Nortan Prisma for sale (122)

Condition: used, operating hours: 24,000 h, Used Bottling Line for Sale Bertolaso 7000 BPH – 1999 for still and sparkling wine. The bottling Line for Sale as a whole, considering every component, is very well maintained. Clean and without obvious or compromising signs of wear. The sparkling wine bottling line reaches an hourly speed of about 3000 BPH on the 0.75 formats. Depalletizer: The line starts with the Acmi automatic depalletizer model Rasar P130; with an electric roller pallet storage that manages the pallets automatically with two pallets waiting. The maximum height of the workable pallet can reach about 2 meters. The standard pallet size is 800 × 1200 with a height of 140 cm. Automatic inter-layer remover with compressed air rotating arm. It has a parachute safety system that prevents the head from going down in case there is an operator. It is also equipped with a perimeter barrier that blocks the machine in case the doors are opened. Filling Isobaric Monoblock of Bertolaso Bottling Line for Sale: The Bertolaso ​​Sincronia 1400 filling monoblock starts with a 28-valve internal bottle rinsing machine followed by an isobaric filler with 36 taps and ends with a 6-head mushroom cork corker, or a 4-head screw cap. It has a machine pitch of about 30 cm to allow the processing of multiple formats of different sizes. The direction is clockwise. Safeguards are all present as also machine manuals. This line’s bottled product is wine and sparkling wine in sizes from 0.375 to 1.5 L.  It performs isobaric filling with mobile nozzles and traditional valves. It generates a vacuum before capping. The type of cap used is cork (straight or mushroom) or silicone with 6 heads; while aluminium and Stelvin caps with 4 heads. The size of the corker ranges from a minimum of 44 × 23.5 to 48 × 30.5 mm. Inspector: It is a 2011 model that is able to check the level and the cap, the internal product and any residues inside the empty bottle. Fully electronic with laser sensors, it can work at a speed of 7000 BPH and over. Washer-dryer: It’s a Cames from 2000 with a spray washing system that rinses the bottle externally, brushes it and then passes it under the hot air hair dryers that immediately dry the bottle preparing the surface for labelling.  Wirehooder and Capsule: Next in line is a Spumante Wirehooder of the brand Nortan Minerva 60, an accumulation space for the bottles followed by a Nortan capper. It is also suitable for sparkling wines with centring, with a maximum height of the processed bottle ranging from 15 to 35 cm. Overall mass 3000 kg; Consumption: 380 v, 15 kW, 50 Hz Fpedpfx Ahjvguu Ds Usp Labelling machine: Bertolaso Bottling Line for Sale has a Krones labeller from the year 2000 with a bottle lock at the entrance. It has 8 plates with a machine pitch of about 30 cm. It has a manual head and glue film adjustment, mechanical centring system and outgoing label smoothing.

Condition: new, 900 mm 900 mm Fpjdpfefg E Hpsx Ah Ujp 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: excellent (used), Machining center HOLZHER Dynestic 7521 -used- Nesting table, pusher with suction device, unloading unit with conveyor belt, hardened, dust-protected prismatic guides, 2-sided guided portal design, helical rack and pinion drive (X- and Y-axis), Network card for remote maintenance, Control cabinet cooling with heat exchanger, manual control unit, Swivel saw unit, Plate tool changer on the move, incl. step mats, laser, Automatic central lubrication, New industrial PC, incl. nesting software with free-form boxes ----- Technical data ----- Processing length X: 4,600 mm, Processing length Y: 2,100 mm, max. traversing speed X: 80 m/min, max. traversing speed Y: 100 m/min, max. traversing speed Z: 25 m/min, Machine control software: CAMPUS HOPS, Motor power main spindle: 7.5 kW, Main spindle speed: 1,000 to 24,000 rpm, Main spindle holder: HSK 63F, Spindle cooling: liquid, Motor power drilling unit: 3.0 kW, Mounting of drilling spindles: M10, fit 11 mm, Number of vertical drilling spindles: 18 pcs, No. horiz. Double drilling spindles in X-direction: 2 pcs, No. horiz. Double drilling spindles in Y-direction: 1 piece, Vacuum pump output: 500 m³/h, Suction connection Ø: 250 / 200 + 2x 80 mm, Compressed air connection: 6-8 bar, Compressed air requirement: 300 l/min. Quality info: Fjdpfxsu R Tcrs Ah Uepp - Complete basic cleaning - Electrics checked - Pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: used, Year of construction: 2008, machine/vehicle number: VS8750, Canon OCE Variostream 8750 Printer with Prisma Server (not in use – old version) - SRA4 controller; IPDS; TCP/IP connectivity - Prisma Server for OCE Printer VS 8750 (Prisma Server HP Proliant ML-370-G4 – this one supports 2 printer sets: 2 duplex or 4 simplex units) - MRM Standard (automatic resolution 240/300dpi or 600dpi) - WT4 Cross Turning Unit Printer 1 SN 88.136 Counter: 576,660,937 – Developer station replaced at 421,061,210 impressions Printer 2 SN 88.137 Counter: 790,048,906 – Developer station replaced at 638,027,916 impressions Year of manufacture: 25.09.2008 I-Configuration (printer setup) Type: C-Twin All systems fully operational. Additionally: Single Canon OCE Variostream 8750 – incomplete, for parts only. Together with the printing line, we are also selling the following parts (quantities may change as the machine is still in use): - Developer: KK01-D15, 1 pcs - Corotron: S29312-F645, 1 pack (8 pcs/pack) - Cleaning Brush: S29312-F1440, 2 pcs - Fine Filter: S26312-F1071, 2 pcs - Fuser Oil: S26312-F646, 2 pcs - Heating Lamp: S29312-F1488, 2 pcs - Toner: KK01-D25, 11 packs (3 pcs/pack) - Drum: S29312-F1463-V2, 2 pcs - Bushing: 2002025921, 2 pcs - Pressure Roller (hard): S29312-F1270, 1 pcs Included: Fpsdpfsvu Rimjx Ah Uop - Hunkeler Unwinder UW6 – S/N: UW6 7183.00835-01/08, year: 2013 - Hunkeler Rewinder RW6 – S/N: RW6 7182.00432-01/31, year: 2013

Condition: used, Year of construction: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Fpedpsv Szt Dsfx Ah Uop Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AA10003134, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,905 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 30 m/min, TECHNICAL DETAILS Working Area X-axis travel: 3,680 mm Y-axis travel: 1,905 mm Z-axis travel: 500 mm (with H50 suction cups) Traverse Speeds X-axis traverse speed: 25 m/min Y-axis traverse speed: 80 m/min Z-axis traverse speed: 30 m/min Milling Unit Number of axes: 5 interpolating axes Rotation direction: right/left Spindle Fsdpfx Ahexcvlls Ujpp Tool holder: HSK 63F Speed range: 600 – 24,000 rpm Power (S1/S6): 15/17 kW at 12,000 rpm Axis Movement C-axis rotation angle: 640° B-axis rotation angle: 270° MACHINE DETAILS Control: NC control Software: 3D CAD system Operation: eye-M operator console with integrated PC Electrical Data Rated voltage: 400 V Number of phases: 3~N Rated current: 84.0 A Frequency: 50 Hz Short-circuit withstand capacity: 10 kA Machine weight: 5,554 kg EQUIPMENT Pendulum operation Automatic axis lubrication Additional fixed control panel TECPAD remote control of machine functions 6 carrier rails Start L1825 Prisma Q working unit Air nozzle for tool Tool length measurement device Vise preparation for worktable with 6 carrier rails Front stop row H110 for worktable with 6 carrier rails First side stop row H110 for worktable with 6 carrier rails The machine will be dismantled for standard truck transport, no excess width required. The current disassembly status can be seen in the photos.

Condition: used, Year of construction: 2016, operating hours: 10,538 h, Used filling machine TETRA PAK A3 Flex 7500 bph Fodpfow Ag Nwex Ah Uspp The used filling machine TETRA PAK A3 Flex 7500 bph delivers advanced performance for bottling applications in the food industry. Operators commonly use this machine for producing UHT milk and fruit-based beverages. The system provides high output, handles various packaging formats, and maintains long-term reliability. Production capacity and format handling The TETRA PAK A3 Flex processes up to 7,500 containers per hour. As a result, it supports production environments that demand high efficiency over multiple shifts. Moreover, the used filling machine TETRA PAK A3 Flex 7500 bph handles both Prisma and Slim formats, which manufacturers often choose for aseptic packaging. Consequently, the machine allows operators to switch formats quickly without modifying core components. This flexibility reduces downtime and increases productivity. Automatic filling system The automatic filling system ensures precise dosing during operation. In particular, the machine processes low- and medium-viscosity liquids such as milk, juices, and functional beverages, including those with pulp. In addition, engineers designed its modular architecture to allow rapid product changeovers while maintaining hygienic conditions. The used filling machine TETRA PAK A3 Flex 7500 bph forms and seals containers using a process that protects microbiological integrity. As such, it ensures that the final product meets food safety standards. Production monitoring and traceability The integrated production log, or works diary, tracks all operational data, including cycle times, error codes, and stoppages. For this reason, supervisors use this information to monitor each batch and respond to deviations in real time. Furthermore, the system ensures full traceability and complies with modern food safety regulations. Notably, the used filling machine TETRA PAK A3 Flex 7500 bph provides a digital record that supports audits and process validation. This feature, in turn, facilitates compliance with internal and external quality assurance protocols. Maintenance and technical accessibility Technicians can access key components easily thanks to the machine’s modular layout. Similarly, the system separates functional units like filling, forming, and sealing, which allows focused intervention without halting the entire line. Consequently, the design reduces maintenance time and lowers operational costs. In fact, operators can also connect the used filling machine TETRA PAK A3 Flex 7500 bph to predictive maintenance systems based on Industry 4.0 standards. Thus, the machine enables proactive asset management and long-term equipment reliability. Plant compatibility and regulatory compliance System integrators can install this machine into existing production lines with minimal adaptation. In many cases, the machine includes interfaces that comply with standard industrial automation protocols.

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape Fpjdpot Eacgefx Ah Ujp automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, LED ceiling light TRILUX type Belviso C2 625 CDP LED 3900nw LED semi-recessed luminaire with CDP microprismatic cover. Louvre luminaires, ceiling luminaires, recessed ceiling luminaire Linear luminaire, high bay luminaire, high bay luminaire suitable for Odenwald ceiling System dimensions 625 x 625 mm Output 45 watts Mains connection 230 Volt, 50 Hz Light color neutral white Luminaire luminous flux 4000 lm Color temperature 4000 K - Suitable for ceiling cut-outs 610 mm x 610 mm, installation depth 65 mm - Sturdy luminaire housing made of sheet steel - Glare-free plastic cover with microprismatic CDP surface - All-round, exclusive light framing - Very high-quality workmanship (net new price over EUR 500) Luminaire dimensions Length: 620 mm Width: 620 mm Lamp height: 72 mm Fjdevbu Awjpfx Ah Ujpp Weight: approx. 8.9 kg Very good condition Used but without damage approx. 100 pieces available Price per piece

Condition: good (used), Year of construction: 2004, overall weight: 40,000 kg, pressing force: 450 t, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die Fodeu Au U Tepfx Ah Uopp WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Condition: used, Year of construction: 2010, 5-axis machining center with nesting table Numerical Control with OSAI software Axis travel (X, Y, Z) mm 4950, 2050, 1000 Working range on X-axis mm 4250 Working range on Y axis mm 1560 Working range on Z axis mm 800 FT multifunctional nesting full-surface worktable No. 1 PRISMA 5-axis electrospindle, kW 12 (hp 16), 900 - 24000 rpm, rotation directions SX / DX Automatic tool changer with 12 positions, HSK-F 63 type cones * n 12 tools diameter 80 mm * n 6 tools diameter 160 mm * max tool diameter mm 250 * maximum weight per tool 4 kg * maximum weight in the warehouse 24 kg Drilling head with 9 spindles arranged as follows: - No. 5 vertical spindles; - No. 4 horizontal star spindles; * Distance between spindles mm 32 * rotation speed rpm 4000 * engine power kw 2.2 Protection and safety system with photocells and perimeter walls Automatic lubrication system Air conditioning system for the electrical panel No. 2 vacuum pumps, one of 250 m3/h Accessories and tools are sold separately Overall dimensions mm 7865 x 4200 x 4000 TECHNICAL DETAILS TO BE CHECKED Fjdpfxewdvr Ro Ah Uspp

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0811759, • Cutting diameter (round tubes): 8 to 90 mm • Square tube profile capacity: 10 × 10 mm to 80 × 80 mm • Cut speed / feed speed: 50 to 300 m/min • Saw blade diameter: approx. 350 mm • Motor power (saw drive): approx. 5.5 kW • Clamping system: BEWO Prisma jaw system (four-point clamping, allows simultaneous clamping of multiple tubes) • Controller / automation: Siemens CNC / centralized Siemens controller; fully automatic setting adjustments based on entered tube parameters. • Deburring: Often integrated (the machine is used together with a deburring unit/system) • Throughput: up to 8,000 pieces per hour in some configurations. Fpodpfx Aexcwc Ssh Uop

Condition: used, operating hours: 52,428 h, Used Bottling Line for Sparkling Beverages up to 9000 bph Fpodpfjvgvbrsx Ah Uep The used bottling line for sparkling beverages up to 9000 bph effectively manages the production of still and sparkling water, as well as soft drinks, in PET containers. This line features interconnected machines, which, together, ensure a continuous and effective workflow. Additionally, each machine in the line operates in isobaric mode, optimizing filling for sparkling beverages. As a result, the system handles up to 9000 bottles per hour, making it a powerful solution for high-output bottling. Containers and Product Type in the Bottling Line For sparkling beverages The system, specifically designed to fill PET containers, provides durability and lightness, making them ideal for both sparkling and still beverages. Furthermore, this line specializes in processing still and sparkling water, along with other non-alcoholic drinks. Using isobaric technology, the line effectively preserves effervescence throughout filling, which, in turn, maintains product integrity and enhances taste quality. Blow Molding Machine – SMI EBS 2016 The SMI EBS blow molding machine, model EBS from 2016, forms PET containers directly on-site. Specifically, it transforms preforms into bottles, ensuring consistent size and container strength. Therefore, this integrated blow molding machine increases efficiency by minimizing reliance on external bottle supplies and maintaining high-quality production standards for the CFT Bottling Line For sparkling beverages. Filling Monoblock – CFT Master EW 32/32/8 2012 The CFT Master EW 32/32/8 filling monoblock, a central component of the used bottling line for sparkling beverages up to 9000 bph, combines rinsing, filling, and capping in one compact unit. Notably, this system uses isobaric filling to keep internal container pressure stable, which is especially beneficial for carbonated beverages. In this way, the setup reduces waste and effectively protects the product’s quality. Labeling Machine – P.E. Labellers Universal M/S 15T/960/3S – 4E 2009 The P.E. Labellers labeling machine, model Universal M/S 15T/960/3S – 4E from 2009, applies labels to PET containers with precision. Label application helps with product identification, in addition to ensuring regulatory compliance. Furthermore, this model offers flexibility and accuracy, especially for containers of various shapes and sizes for the CFT Bottling Line For sparkling beverages Sleevering Machine – Nortan NORTAN 50 2008 The Nortan NORTAN 50 sleevering machine from 2008 of the CFT Bottling Line For sparkling beverages adds protective sleeves to containers, enhancing aesthetics and protecting them from contamination. In addition, this process proves essential for beverages stored or transported over long periods. Thus, the used bottling line for sparkling beverages up to 9000 bph benefits from this feature by improving product durability on store shelves.

Condition: used, Year of construction: 2013, functionality: fully functional, CNC - ACCORD 40 FX MACHINE MAIN FEATURES: - working area X - Y = 5,020 x 1,680 mm Automatic lubrication. Pendulum machining. Air-conditioned control cabinet. XILOG MAESTRO Teleservice. 8 FX MATIC L=1600 work table supports automatically positioned Includes: - 2 fixed side base supports - 8 supports with X-axis drives - driven belt conveyor for removing waste from the inside of the table Each support equipped with: - 3 driven trolleys for mounting pneumatic clamps and suction cups - cleaning nozzles for each moving trolley - pneumatic locking/release enabling quick replacement of clamps and suction cups - preparation for strips facilitating loading and unloading - preparation for mounting an additional stop Vacuum clamping system for elements with 2 independent work fields. Front and rear row of stops H=110 MAXI PRISMA T 5-axis spindle - HSK 63E holder - right/left rotation - power: 13 kW - rotation from 600 - 18,000 rpm - 15 kW inverter - liquid cooling - TTS locking system Waste guide at the electrospindle Fpodpfx Aowkqavsh Usp Blow nozzle for the tool Tool length measurement Preparations for pneumatic clamps BRC - Additional drilling and milling machining head Saw - saw diameter 300 mm - rotation 4,500 rpm 1 vertical ER25 clamp for milling cutter - machining depth 60 mm - rotation 18,000 rpm 3 vertical independent M10 clamps for drills, spacing 32 mm - machining depth 50 mm - speed 8,000 rpm 3 vertical independent M10 drill mounts, spacing 21.5 mm for making holes for the handle - machining depth 50 mm - speed 8,000 rpm 2 horizontal independent mounts (1 per side) ER25 for the milling cutter - machining depth 1x115 and 1x75 mm - speed 18,000 rpm 4 horizontal independent mounts (2 per side) M10 drill mounts - machining depth 75 mm - speed 8,000 rpm Window equipment in the left field Worktable equipment enabling the machining of linear and arc elements of windows: - 9 pneumatic clamps H=110 mm - 1 base stop H=110 mm on the left fixed support for basing arcs - 7 base side stops H=110 on supports - 1 laser as a base for arc elements in the X axis Supports facilitate loading/unloading Vacuum pump with a capacity of 250 m 3 /h TECPAD portable console PRO-SPEED security system Security system allowing for fast machine travels. Axis runs: X=90 m/min Y=90 m/min Z=30 m/min SAV€NERGY for vacuum pump TR-10 – tool magazine mounted on the table -10 positions TRC 48 – tool magazine Mounted at the back of the movable portal. - 48 tool positions (without holders) - distance between axes: 104 mm - max. tool diameter: 350 mm - max. load of one place: 10 kg - total weight of tools in the warehouse: 250 kg MACH 5 - a system enabling tool change in 5 s. Year of machine production - 2013 The machine is in continuous use - it will be available from July We invite interested parties to inspect it during operation Purchased as new from an authorized SCM representative in Poland and serviced by an authorized SCM service throughout the period of use The price of the machine includes preparation for transport by the SCM service and loading of this machine The film has been slightly accelerated

Condition: used, Year of construction: 2001, functionality: fully functional, Speed: 12,000 BPH with 0.75 liter bottles Keber depalletizer: Model: Depack 92 Fjdpfx Aov Hrcfjh Ujpp Year: 2001 Speed: 65 layers/hour Push type Pallet magazine Layer removal system Worked pallet size: imperial pallet 1000 mm x 1200 mm x 1400 mm Maximum workable pallet height: 2300 mm Pall microfiltration system: Model: Saso64gnw80j-it Year: 1998 KHS monoblock Model: Innofill um Year: 2001 Rotation direction: clockwise Speed: up to 33,000 BPH Consisting of: Rinserter 100 clamps Carousel height adjustment: automatic Fixed nozzle Number of treatments: 2 Type of treatments: water, nitrogen Filler 100 gravity taps Automatic tank height adjustment Mechanical valve Pre-evacuation Corker 20 straight cork heads Cork size: 25 mm x 48 mm Automatic head height adjustment Vacuum system before corking Inert gas injection system before corking Stelvin corker 15 heads Automatic head height adjustment Flying catch distribution system No. 2 Pneumatic cap elevator FT System bottle inspector: Model: clx-300/ce333 Year: 2001 Cap presence, level, capsule and label check No. 3 ejectors for waste on belt: 1 after monoblock for level and cap 1 after capsule distributor 1 after labeller WBeer capsule distributor: Year: 2001 Long-term storage Capsule type: PVC Nortan capsuling machine for PVC Model: Termocap 12 Year: 2002 12 heads Manual head adjustment Kosme labeller: Model: Top.Star Year of construction: 1998 Rotation direction: anticlockwise Head adjustment: automatic 16 heads Movement of plates with mechanical cam and brake/clutch system Number of stations: 4 (2 with cold glue; 2 adhesive) Number of applicable labels: 2 Suitable for applying front and back (adhesive) and front and back (with glue) Optical centering with photocells Additional ironing at bottle exit Keber bottle and carton conveyor belts: Year: 2001 Keber carton erector: Model: Formapack 3 s Year: 1997 Hot glue closing Nordson 3400v series gluer Keber carton packer: Model: Incapack Year: 1997 Speed: 400 cycles per hour Number of heads: 1 Number of grips per head: 30 can process 4 or 5 cartons (depending on the bottle diameter) 3X2 or 2 cartons 4X3 Type of heads: adjustable Keber partition inserter: Model: Insertpack Year: 2001 Number of heads: 3 can process 3 cartons 3X2 or 2 cartons 4X3 Keber carton closer: Model: Incolpack Year: 1997 Nordson 3400v series gluer Ft System carton weigher: Model: pco 150 nx Year: 2001 Belt ejection system Keber palletizer: Model: pal mec arm 98 Year: 2001 Speed: about 1.5 layers/minute Type: push Pallet magazine Lap pad inserter system Maximum workable pallet height: 2300 mm Keber pallet wrapper: Model: Volpack 095 Year: 2001 Speed: 19 pallets/hour Maximum workable pallet height: 2200 mm Wrapping type: rotary table General information: Safety guards

Condition: good (used), Year of construction: 2014, table dimensions : 2000 X 900 mm axes : 1800 X 860 X 750mm spindle speed : 8 000 tours/ min spindle taper : BT50 spindle power : 18,5 KW tools magazine : 40 pockets coolant through spindle 20 bar prismatic slide guides weight : 21 t BLUM receiver systems with infrared transmission mist aspiration system Fpodpfotznlbex Ah Ujp chip conveyor, double screw + elevator isolation transformer Table extension to reach 0 with the spindle to machine plates (removable) Preparation for 4th axis. electronic handwheel

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Fjdpfxow D E A Ee Ah Uepp

Condition: new, 9D715US crankshaft balancing machine is adapted for balancing crankshafts of various designs, including crankshafts of V6, V8, V10 and V12 engines, with balancing weights on the connecting rod pins: - Balancing of crankshafts of any design - Shaft weight up to 300kg - Shaft length up to 1400mm - Drilling module for unbalance correction The machine design allows balancing crankshaft separately, as well as crankshaft complete with flywheel and clutch, which guarantees minimum unbalance during engine operation. MACHINE HIGHLIGHTS • Hard-bearing supports - safe operation with high initial unbalance at low speeds. • Roller cassettes with large diameter spherical rollers and provide the required accuracy for balancing heavy shafts. • Replaceable antifriction prismatic V-blocks allow balancing of crankshafts with low mass or with special bearing journals. • Narrow support stands of the machine allow balancing of crankshafts with complex configuration and with “narrow” bearing journals. The 9D715US machine has a cassette width of 27 mm, which is the best in its class. • For balancing V-shaped crankshafts, the machine can be equipped with counterweights (variable weight) to simulate the weight of connecting rods. • A vertical drilling module mounted on its own guides allows unbalance in the crankshaft counterweights to be corrected directly on the machine. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • Measuring balancing system has additional necessary functions for crankshaft balancing: - recalculates the unbalanced mass to the drilling depth, taking into account the drill diameter and the permissible drilling depth. - It recalculates the unbalance on several correction planes, so that unbalance can be corrected in neighboring crankshaft counterweights. SPECIFICATIONS Weight range of balanced rotors 3 - 300 kg Maximum rotor diameter (above the bedding) 1100 mm Diameter of rotor support journals 20 - 140 mm Distance between centres of rotor journals 150 – 1350 mm Support type Rollers / V-blocks Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Fodpfewk Ittex Ah Uepp Electric motor power 2.2 kW Parameters of the supply network 380V, 3 Ph, 50Hz VTM Group balancing machines will allow you to do your job well and get positive feedback and attract more customers. Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: ready for operation (used), Technical characteristics Forward spped 15m/min Digital control CN7000 ISO, IHM Mécanumeric on mobile panel with 15 inch touchscreen, data entry Ethernet link 500 W direct current servo motorization on the 3 axes Guides by rectified prismatic rails and ball bearing shoes Ball screw transmissions on X1, X2, Y and Z axes Protection of the kinematics of the axes by telescopic bellows on the X, Y, Z axes Aluminum bar support plate Digital Z axis 195 mm Cutting head with sealed CO2 ROFIN SINAR laser including laser, unit of control, cooling, mirrors - Maximum power 360 W Aiming laser Equipment compliant with CE directives following recommendations 2006/42 / CE + 2014/30 / UE + 2006/95 / CE and including : Double safety circuit with standardized relay + shock detector buffers on gantry Course d'axe Y1510 mm Course d'axe X3050 mm Course d'axe Z195 mm Power and Motors Fpodpfstqkawox Ah Uep Voltage: 400 V Pluging: Three-phased Power: 27 Kw Overall dimensions

Year of construction: 2001, condition: ready for operation (used), A CNC 6-axis laser precision machine for non-contact laser processing and measurement of complex geometries, particularly in the tool and mould making industry, is available. Travel X/Y/Z: 300mm/400mm/500mm, table dimensions X/Y: 300mm/400mm, axes mechanical/optical: 3/3, measurement system: non-contact SI sensor, measurement accuracy: +/-0.01mm, surface finish: Ra under 1µm, operating hours: 21045h, processing hours: 6549h. The laser (Prisma) is defective. Documentation available. An on-site inspection is possible. Fpodow H Atyjpfx Ah Uop

Condition: new, ELMAG INDUSTRIE 1000/230 HD Universal center lathe 88173 incl. RÖHM lathe chuck incl. 3-axis position indicator incl. quick-change steel holder 'Set', Multifix system Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out Heavy lead and feed spindle lathes, 5,500 watts: The quality of the INDUSTRIE 230 HD models becomes clear as soon as you switch them on: barely audible drive noise. No vibrations at large cutting depths. In fact, at 2,635, 2,835 and 3,055 kg, the 230 HD models are the heaviest in their class and, thanks to their extremely robust design - e.g. high-frequency hardened prismatic guides - are ideally suited for heavy-duty and continuous operation. At 80 mm, the 230 HD offers an extra-large spindle bore for processing bar stock up to 2 1/2 inches in diameter (76.1 mm). A turning size via slides of Ø 290 x 1,000, 1,500 or 2,000 mm and a maximum turning diameter of 460 or 700 mm leave almost nothing to be desired for machine, steel, plant and tool construction - as well as 12 speeds for 170 longitudinal and cross feeds and 150 leadscrew pitches for metric and inch threads. Standard equipment: - including digital position indicator - RÖHM three-jaw lathe chuck Ø 250 mm - Four-jaw faceplate chuck Ø 315 mm - Clamping disk Ø 350 mm - 2 fixed centers - Rotating center point MK 5 - Moving steady rest - Steady rest - Quick-change steel holder set, 5-piece MB - Thread gauge - Halogen machine lamp - Emergency stop button / zero voltage release - Rotating chuck guard with safety switch - Underframe / chip tray / splashback - Tool kit / operating instructions / CE Special accessories: - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set for turning tool set 25 x 25 mm - Turning tool set 'Camlock' 25 x 25 mm, 7-piece - Cut-off tool holder 25 x 25 mm, length 150 mm - Cutter for cut-off tool holder 25 x 25 mm ADVANTAGES: - 'CE' compliant machines with maximum safety and machine accuracy in accordance with DIN - Powerful and robust for trade & industry - Coolant tank and pump integrated in the machine base TECHNICAL DATA: Center width 1000 mm Center height 230 mm Turning diameter over bed 460 mm Turning diameter over slide 290 mm Turning diameter without bridge 700 mm Machine bed width 340 mm Bridge length 200 mm Cross slide travel 280 mm Top slide travel 100 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder D1 - 8 Spindle holder (turning spindle) MK 7 mm Spindle bore 80 mm Speed 25 - 1800 rpm Speed steps 12 Longitudinal feeds (170) 0.04 - 2.46 mm/rev Transverse feeds (170) 0.02 - 1.23 mm/rev Metric thread dimension (24) 0.5 - 20 mm metric modular thread (20) 0.25 - 10 mm Inch thread, threads G (61) 1-5 / 8 - 72 G/' Inch modular thread, threads G (45) 3-1 / 4 -96 G/' Lead screw pitch 6 mm Fpsdpfx Ahjtw Dxko Usp Lead screw diameter 40 mm Quill holder MK 5 Quill diameter 75 mm Quill travel 130 mm Motor power 5500 W Coolant pump 40 W Mains connection 400/50 V/Hz Length (total) 2310 mm Height (total) 1255 mm Weight 2635 kg

Condition: new, ELMAG universal lathe PREMIUM CU 630 RD - Vario center distance 1000mm incl. RÖHM lathe chuck Performance data and holders: - Turning Ø 325-1,320 mm, without bridge 440-1,500 mm - Turning size via slide Ø 190-940 x 6,000 mm - Drive motor: 2,200-22,000 W, 400 V, high torque - Lathe chuck holder: DIN 55027 - Quill holder: MK 3 - MK 6 Standard equipment: - RÖHM three-jaw lathe chuck - Quick-change steel holder set, 5-piece - Halogen machine lamp - Emergency stop button / zero voltage release - Chuck guard with safety switch - Tool slide with splash guard - Underframe / chip tray / splash guard - Tool set / operating instructions / CE Standards PREMIUM CU series: - Heavy gray cast iron machine bed, good vibration damping - Dismountable bridge - Prismatic guides - Hardened and precision-ground turning spindle, high concentricity, adjustable precision bearings - Smooth-running rotary spindle and feed gear with oil bath - Gear wheels made of chrome-nickel steel, hardened and precision-ground - Feed reversal circuit - Covered trapezoidal thread lead screw, hardened, precision ground - Tool slide with lock nut - Precise slide guides, adjustable - Solid tailstock with taper turning adjustment - Lathe accuracy according to DIN Special accessories: - SINO digital position indicator for 3 axes - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set, 25 x 25 mm - Grooving tool set incl. plates, 6 pieces - Machine shoe Ø 160 mm, 6 pcs. on request: - Steady rest - Steady rest - Steady rest with ball bearing guide - Faceplate - 4-jaw faceplate chuck ADVANTAGES Rotary spindle and feed gearbox with quick-change elements Feed reversal Sliding protective cover Gear plate Halogen lamp Fpjdpfx Ajt Hhbyjh Usp Coolant pump Emergency stop button Rapid traverse motor Longitudinal slide TECHNICAL DATA Center width 2000 mm Center height 315 mm Turning diameter over bed 630 mm Turning diameter over carriage 430 mm Turning diameter without bridge 830 mm Machine bed width 400 mm Cross slide travel 315 mm Top slide travel 130 mm Turning tool cross-section, max. 32x32 mm Lathe chuck holder (DIN 55027) no. 11 Spindle holder (turning spindle) 120 mm Spindle bore 103 mm Speed range 1, infinitely variable 16 - 63 rpm Speed range 2, infinitely variable 63 - 250 rpm Speed range 3, infinitely variable 315 - 1250 rpm Longitudinal feeds (120) 0.04 - 12 mm/rev Transverse feeds (120) 0.02 - 6 mm/rev Metric thread dimension (64) 0.5 - 120 mm Metric modular thread (64) 0.125 - 30 mm Inch thread, threads G (64) 60 - 1/4 G/' Inch modular thread, threads G (64) 240 - 1 G/' Quill holder MK 5 Quill diameter 90 mm Quill stroke 230 mm Motor power 11000 W Mains connection 400/50 V/Hz Length (total) 3600 mm Height (total) 1400 mm Weight 3310 kg

Condition: new, ELMAG universal lathe PREMIUM CU 325 RD - Vario center distance 1000mm incl. RÖHM lathe chuck Performance data and holders: - Turning Ø 325-1,320 mm, without bridge 440-1,500 mm - Turning size via slide Ø 190-940 x 6,000 mm - Drive motor: 2,200-22,000 W, 400 V, high torque - Lathe chuck holder: DIN 55027 - Quill holder: MK 3 - MK 6 Standard equipment: - RÖHM three-jaw lathe chuck Ø 160 mm - Quick-change steel holder set, 5-piece - Halogen machine lamp - Emergency stop button / zero voltage release - Lathe chuck guard with safety switch - Tool slide with splash guard - Underframe / chip tray / splash guard - Tool set / operating instructions / CE Standards PREMIUM CU series: - Heavy gray cast iron machine bed, good vibration damping - Dismountable bridge - Prismatic guides - Hardened and precision-ground turning spindle, high concentricity, adjustable precision bearings - Smooth-running rotary spindle and feed gear with oil bath - Gear wheels made of chrome-nickel steel, hardened and precision-ground - Feed reversal circuit - Covered trapezoidal thread lead screw, hardened, precision ground - Tool slide with lock nut - Precise slide guides, adjustable - Solid tailstock with taper turning adjustment - Lathe accuracy according to DIN Special accessories: - SINO digital position indicator for 3 axes - Insert turning tool set 16 x 16 mm, 7-piece - 7-piece insert set, 16 x 16 mm - Grooving tool set incl. plates, 6-piece - Machine shoe Ø 160 mm, 8 pcs. on request: - Steady rest - Steady rest - Steady rest with ball bearing guide - Faceplate - 4-jaw faceplate chuck ADVANTAGES Rotary spindle and feed gearbox with quick-change elements Feed reversal Sliding protective cover Gear plate Halogen lamp Coolant pump Emergency stop button Rapid traverse motor Longitudinal slide Fpjdpjt Hg Skjfx Ah Uep TECHNICAL DATA Center width 1000 mm Center height 165 mm Turning diameter over bed 325 mm Turning diameter over carriage 190 mm Turning diameter without bridge 440 mm Machine bed width 200 mm Cross slide travel 150 mm Top slide travel 95 mm Turning tool cross-section, max. 16x16 mm Lathe chuck holder (DIN 55027) no. 5 Spindle holder (turning spindle) MK 4 mm Spindle bore 32 mm Speed range 1, infinitely variable 85 - 405 rpm Speed range 2, infinitely variable 470 - 2200 rpm Longitudinal feeds (48) 0.006 - 1.77 mm/rev Transverse feeds (48) 0.003 - 0.885 mm/rev Metric thread dimension (48) 0.1 - 28 mm metric modular thread (19) 0.1 - 1.75 mm Inch thread, threads G (53) 75 - 2.5 G/' Inch modular thread, threads G (19) 70 - 4 G/' Quill holder MK 3 Quill diameter 40 mm Quill travel 100 mm Motor power 2200 W Mains connection 400/50 V/Hz Length (total) 2150 mm Height (total) 1300 mm Weight 770 kg

Condition: new, ELMAG universal lathe PREMIUM CU 400 RD - Vario center distance 1000mm incl. RÖHM lathe chuck Performance data and holders: - Turning Ø 325-1,320 mm, without bridge 440-1,500 mm - Turning size via slide Ø 190-940 x 6,000 mm - Drive motor: 2,200-22,000 W, 400 V, high torque - Lathe chuck holder: DIN 55027 - Quill holder: MK 3 - MK 6 Standard equipment: - RÖHM three-jaw lathe chuck - Quick-change steel holder set, 5-piece - Halogen machine lamp - Emergency stop button / zero voltage release - Chuck guard with safety switch - Tool slide with splash guard - Base frame / chip tray / splash guard - Tool set / operating instructions / CE Standards PREMIUM CU series: - Heavy gray cast iron machine bed, good vibration damping - Dismountable bridge - Prismatic guides - Hardened and precision-ground turning spindle, high concentricity, adjustable precision bearings - Smooth-running rotary spindle and feed gear with oil bath - Gear wheels made of chrome-nickel steel, hardened and precision-ground - Feed reversal circuit - Covered trapezoidal thread lead screw, hardened, precision ground - Tool slide with lock nut - Precise slide guides, adjustable - Solid tailstock with taper turning adjustment - Lathe accuracy according to DIN Special accessories: - SINO digital position indicator for 3 axes - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set, 25 x 25 mm - Grooving tool set incl. plates, 6-piece - Machine shoe Ø 160 mm, 8 pcs. on request: - Steady rest - Steady rest - Steady rest with ball bearing guide - Faceplate - 4-jaw faceplate chuck ADVANTAGES Rotary spindle and feed gearbox with quick-change elements Feed reversal Sliding protective cover Gear plate Halogen lamp Coolant pump Emergency stop button Rapid traverse motor Longitudinal slide TECHNICAL DATA Center width 1000 mm Center height 200 mm Turning diameter over bed 400 mm Turning diameter over slide 235 mm Turning diameter without bridge 550 mm Machine bed width 320 mm Cross slide travel 235 mm Top slide travel 110 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder DIN 55027 No. 6 Spindle holder (turning spindle) MK 6 mm Spindle bore 52 mm Speed range 1, infinitely variable 18 - 98 rpm Speed range 2, infinitely variable 48 - 265 rpm Speed range 3, infinitely variable 3: 144 - 790 / 4: 385 - 2120 rpm Longitudinal feeds (80) 0.015 - 0.6 mm/rev Transverse feeds (80) 0.0075 - 0.3 mm/rev Fsdpfjt Hhbtjx Ah Uopp Metric thread dimension (40) 0.25 - 7.5 mm metric modular thread (40) 0.0625 - 1.875 mm Inch thread, threads G (40) 120 - 4 G/' Inch modular thread, threads G (40) 480 - 16 G/' Quill holder MK 4 Quill diameter 50 mm Quill travel 100 mm Motor power 7500 W Mains connection 400/50 V/Hz Length (total) 2350 mm Height (total) 1330 mm Weight 1590 kg

Condition: new, Optimum OPTIturn TH 3610D mechanic lathe Completely equipped mechanic's lathe. TH 3610D with digital position indicator DPA 21 Optimum dealer - please ask for our best offer! Hardened and ground Z-axis guideway Spindle mounting Camlock DIN ISO 702-2 No. 5 Fpjdpfx Ahsg Ryt Ae Uep Precisely machined slide Handwheels with adjustable fine scaling 0.04 / 0.02 mm Quadruple steel holder All guideways adjustable by means of taper bars Main spindle running in oil bath Gear wheels smooth-running, hardened and ground Guaranteed concentricity of spindle nose better than 0.015 mm Gear wheels and shafts hardened and ground, running in oil bath in precision bearings Handwheels decoupled and tested according to EN 23125 Safety handwheels with push-out function in X- and Z-axis Two-channel right-left switch tested according to EN 23125 Switch with life cycle calculation, tested according to EN ISO 13849 Motor protection switch, lockable main switch Right/left rotation switchable on bed slide Lead screw cover Tailstock for taper turning adjustable ± 10 mm Tailstock quill and handwheel with adjustable fine scaling 0.025 mm Quick, easy and tool-free adjustment by means of clamping lever Heavily ribbed prismatic bed, inductively hardened and precision ground Machine base with tool compartments on both sides Emergency stop device with foot actuation Pull-out chip tray with guide rails LED machine lamp integrated in chip guard TH 3610D: Digital position display DPA 21 User-friendly membrane keyboard, splash-proof, closed and glare-free Glass scales TECHNICAL DATA Dimensions and weights Length (product) approx. 1930mm Height (product) approx. 1620mm width/depth (product) ca. 725mm weight (net) ca. 572kg Working range Center height 180mm Swing diameter in bed bridge 516mm Center width 980mm Turning length in the bed bridge 160mm Swing over machine bed 356mm Bed width 187mm Speed range Number of speed ranges 8 Speed range 70 - 2000min¯¹ Electrical data Power drive motor 1,5kW Mains frequency 50Hz Supply voltage 400V Spindle Spindle mounting Camlock DIN ISO 702-2 No. 5 Spindle cone MK 6 spindle bore/rod passage diameter 52mm steel holder mounting height max. 16mm Tailstock Tailstock mount MK 3 Tailstock quill diameter 42mm Tailstock quill stroke 120mm Pitch Pitch Metric 0.4 - 7mm/rev Pitch Inch 56 - 4Gg/1" Number of pitches metric 26 Number of pitches inch 34 Travel Travel X-axis 100mm Travel Y-axis 170mm Feed rate Feed range longitudinal 0.052 - 1.392mm/rev Feed range planar 0.014 - 0.38mm/rev Number of feeds longitudinal 32 Number of feeds planar 32 SCOPE OF DELIVERY Fixed steady rest passage max. Ø 100 mm Travelling steady rest passage max. Ø 95 mm LED machine light Reducing sleeve MK 6 / MK 3 Two fixed centering tips MK 3 Quadruple steel holder Change gear set Machine base Machine initial filling with quality oil Operating tool Do not forget the lathe chuck!