Used Zwick for sale (21)

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. Rsdpfezizrkox Ac Tecd (Subject to changes and errors in technical data and specifications!)

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Rcjdpjzizlqefx Ac Tod Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: used, Zwick / Roell Type: LTM10 Maximum testing frequency: 100 Hz, depending on the amplitude Dynamic testing force in tension/compression: 10 kN Static testing force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeatability accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Testing space height without force sensor: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: according to maintenance instructions, partially performed by Zwick/Roell Accessories: Screw chucks, software (TestXpert research) Connection: 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Rjdpfxszh D R Hj Ac Tecd

Condition: excellent (used), Zwick / Roell ProLine Z005 Universal Testing Machine Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Machine Type: Universal Testing Machine / Material Testing Machine Maximum Testing Force: 5 kN Load Cell: Xforce P 5 kN For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile, compression, and material testing in laboratories, quality assurance, research, and development. Technical Data Machine dimensions approx.: 917 x 439 x 1331 mm (W x D x H) Testing width: approx. 440 mm Frame width: approx. 720 mm Frame installation width: approx. 770 mm Machine weight approx.: 200 kg Power connection: 230 V Frequency: 50 / 60 Hz Power consumption: 3.5 A Connection: 1L / PE / N Made in Germany Load Cell Type: Zwick Xforce P Rated force: 5 kN Measurement start, Class 1: 20 N Measurement start, Class 0.5: 100 N Nominal measurement travel: 0.06 mm Protection class: IP54 Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Weight: approx. 0.65 kg Connection thread: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Measuring Module Rsdpfx Aszfy Ivsc Tecd Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measurement value Measurement value acquisition rate: max. 10 kHz Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Machine electronics PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Research and development Laboratory applications Scope of supply Zwick / Roell ProLine Z005 universal testing machine Xforce P 5 kN load cell DCSC measuring module PC system / software as shown in the pictures Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Availability: by arrangement. Scope of supply as shown in the pictures. Changes and errors in the technical data and prior sale reserved.

Condition: good (used), ZwickRoell Temperature Chamber for AllroundLine Model: TEE160/LN2 40S The TEE160/LN2 40S is a specialized temperature chamber designed primarily for material testing in combination with ZwickRoell testing machines (specifically the AllroundLine). Flexible Application ZwickRoell’s innovative temperature chamber ensures a flexible testing system tailored to customer needs—without compromise. This guarantees reliable test results well into the future. The safety door function ensures operator protection in compliance with European safety regulations. The chamber door serves as a safety door with an interlocking mechanism. Precise Temperature Control The temperature chamber creates extremely uniform and precise conditions for specimens throughout the entire chamber volume. Rjdpfx Aszcpwpoc Tecd This ensures accurate and repeatable test results. Key Specifications Temperature range: -40°C to +160°C. Cooling system: Liquid nitrogen (LN2) for rapid cooling rates. Temperature Chamber for AllroundLine Application: Specifically designed for integration into materials testing machines to perform mechanical tests (e.g., tensile or compression tests) under controlled environmental conditions. All panels in the door area (interior and exterior) are made of stainless steel. Dismountable heavy-duty base frame Dimensions: W x D x H = 1400 x 600 x 800 mm Chamber: W x D x H = 440 x 530 x 650 mm Test opening: 110 mm Power supply: 400/230 V, 16 A, 3N~, 50/60 Hz Cooling via LN2 (liquid nitrogen) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Rcedsxw N Uvopfx Ac Ted Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Testing chamber width: 440 mm Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Mains frequency: 50/60 Hz Mains-side protection of the power connection cable: 16 A Safety functions The drive is equipped with a mechanical holding brake. Rsdpfezpw Hdjx Ac Tocd When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, ZwickRoell Z100 THW Allround Table Top Manufacturer: ZwickRoell GmbH & Co. KG Type: Z100 THW Model: 100 kN Allround Table Top Year of Construction: 2024 Machine Type: Electromechanical Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a like-new ZwickRoell Universal Testing Machine, Type Z100 THW Allround Table Top, manufactured in 2024. The machine is suitable for highly precise tensile, compression, bending, and material tests in research, development, quality assurance, laboratories, and industrial applications. The testing system is equipped with a 100 kN XforceK load cell, state-of-the-art measuring and control technology, and comprehensive documentation, including operating instructions, testing, and calibration documents. Technical Data: Manufacturer: ZwickRoell GmbH & Co. KG Type: Z100 THW Model: 100 kN Allround Table Top Article Number: 3023272 Works Number / Serial Number: 746182 Year of Construction: 2024 Testing Force: 100 kN Test space height (bottom): 1,285 mm Test space height (top): 1,400 mm (with additional cross member) Test space width: 1,040 mm Cross member speed: 0.0001 to 1,500 mm/min Return speed: max. 2,500 mm/min Control deviation: max. 0.05 % Stroke resolution: 0.484471 nm Positioning accuracy: ±2 µm Control cycle: 1,000 Hz Power connection: 400 V / 3-phase / N / PE Mains frequency: 50 / 60 Hz Current consumption: max. 9 A per phase Power consumption: approx. 6 kVA Protection class: IP32 Load Cell: Manufacturer: ZwickRoell Series: XforceK Serial Number: 832082 Nominal force: 100 kN Nominal sensitivity: 2 mV/V Dimensions: Load frame height: 1,769 mm Overall height with base frames: 1,884 to 2,694 mm Width: 1,360 mm Width with base frames: 1,536 mm Width including machine electronics: 1,729 mm Depth with base frames: 781 mm Depth including machine electronics: 690 mm Rcedpfx Aozktr Sjc Ted Weight: Load frame with machine electronics: approx. 215 kg Base frames: approx. 34 kg System weight with typical components: approx. 315 kg Maximum total weight according to nameplate: 385 kg Equipment: Electromechanical two-column testing frame 100 kN XforceK load cell Electronic measuring and control technology Programmable test sequences Digital measurement data acquisition Mechanical holding brake Control panel with emergency stop Original ZwickRoell operating manual Testing and calibration protocols Measurement process capability studies (Cg/Cgk) Calibration markings present CE marking Accessories as shown in the pictures Condition: Used Year of construction 2024. The machine is in very good condition. Testing, maintenance, and calibration documents are available. Optical condition as shown in the pictures. Scope of supply: ZwickRoell Z100 THW Universal Testing Machine 100 kN XforceK load cell Original operating manual Testing and calibration documents Documentation Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Rsdpfxszimgto Ac Tjcd Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Rcedezil Upspfx Ac Tjd Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Maximum test chamber height: 1370 mm Test chamber width: 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Rcodpfx Aezil Uisc Tjd Hydraulic power unit 280 bar Mounting surface: 415 cm² Clamping device / specimen holder included (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Subject to alterations and errors in technical data; all information provided without guarantee!) For further questions, please feel free to contact us by phone.

Condition: used, Zwick Type: Z30 Technical specifications: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Rcodjzil Ucepfx Ac Tjd Extensometer ClipOn 40 mm Computer + software testXpert II V3.5 Total weight approx. 500 kg Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions by phone.

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Rcedpfx Acezii Uge Tsd Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: good (used), Zwick Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Materials Testing Machine Test force in tension/compression: 500 N Overall height, without head traverse: 789 mm Overall width: 411 mm Overall depth: 622 mm Footprint: Net standing area: 0.008 m² Load frame base area: 0.196 m² Specific floor load: Based on typical equipment: 0.85 kg/cm² With 50% safety margin: 1.28 kg/cm² Ceiling load: Based on typical equipment: 97 kN/cm² With 50% safety margin: 146 kN/cm² Working space depth: 105 mm Working space height with upper mounting bracket: Minimum height: 235 mm Maximum height: 565 mm Working space height with lower mounting bracket: Minimum height: 90 mm Maximum height: 420 mm Weight: approx. 78 kg with extras Condition: used Rcodjziixlepfx Ac Tsd Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), Zwick / Roell Zwick Indentec Hardness Tester Type: 4150DLC-A Technical Specifications: Available test forces: 60, 100, and 150 kgf Rcjdpfx Acezh D Raj Tjd Power supply: 115 / 230 V (50 - 60 Hz) 2/1A 1L/N/PE + EO-4010C camera and ueye software Condition: used Weight: approx. 60 kg Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer a Zwick / Roell tensile testing machine, a tabletop testing machine. Zwick / Roell materials testing machine BDO-FB0.5TH Testing loads in tensile/compressive direction: 500 N Rjdpfjzdr Hnox Ac Tecd Height: 1565 mm, Width: 292 mm, Depth: 469 mm Width of the test area: infinite Test area depth: 100 mm Max. working stroke without accessories: 1266 mm PC or printer interface: RS 232 Required PC connection (for PC operation): COM 1 Power data: 115/230 V (PH, N, PE) Rated power: 0.4 kVA Mains frequency: 50/60 Hz Weight: 47 kg Type: BDO-FB0.5TH Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table-top testing machine, tensile strength testing machine Application area: Wide range of applications, from testing plastics and elastomers to testing paper, textiles, foam, and wire, as well as component testing. Load frame: Max. test force FN in tension/compression: 2.5 kN Height (h1) approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Height of the working area h min ... h max: Travel carriage angle mounted upwards: 227 ... 573 mm Travel carriage angle mounted rotated by 180°: 57 ... 403 mm (each without connecting bolt) Connection values: Electrical connection: 115/230 V 4/2A-1PH/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz Redpfszdry Isx Ac Tecd 2.5 kN Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Zwick Type: BZ1.0 / TH1S Zwick table-top testing machines Rcjdpfszdryzsx Ac Ted Zwick with a maximum force of 1.0 kN. Stroke length: 1150 mm. Testing speed: 0.1 ... 1800 mm/min Scope of delivery: (See images) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: as good as new (ex-display), Year of construction: 2026, throat depth: 320 mm, total height: 620 mm, total width: 840 mm, total length: 850 mm, measuring range Z-axis: 400 mm, workpiece weight (max.): 200 kg, height adjustment type: mechanical, DuraVision 30 G5 small load/macro hardness testing machine for Brinell, Rockwell, and Vickers testing, conforming to standards according to EN ISO and ASTM, as well as carbon testing according to DIN. Torsionally rigid gray cast iron base for the main load range 3 kg - 3,000 kg (29.43 N - 29,420 N) PLC measuring and control electronics for monitoring the application of the load with automatic test load change and manual table height adjustment via handwheel 12MPix color camera for 3-stage zoom Motorized pivoting 3-position turret incl. 1 objective lens and 1 indenter adapter Removable clamping jaws with clamping inserts enable unclamped and clamped testing Test height 0 - 400 mm, outreach 320 mm Specimen table, support diameter 90 mm Maximum specimen weight 200 kg High-performance LED incident lighting Capacitive 10" touch display with LED backlight Integrated PC with Win 10 IoT 64-bit and 128 GB SSD storage Rcjdpfxozfnpbe Ac Tsd Interfaces: 4x USB 3.0, 1x Displayport, 1x HDMI, 2x RJ45 ecos Workflow Touch Basic operating software incl. 1 test method ecos IMAGE for fully automatic, standard-compliant image analysis of Vickers, Knoop, and Brinell Automatic brightness control and autofocus with statistics and test report function ecos templates for frequently used settings ecos CODE for reading and creating QR codes ecos EXPORT EDITOR for individual customization of the export data (format: PDF, Excel, XML, CSV) User management for individual customization of access rights in ecos Workflow Touch ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant checks of the hardness tester (periodic and indirect testing of the calibrated methods). Note: An additional hand scanner is required to read a QR code (not included in the scope of supply). NKW28E05Z Ball holder 28 mm length, diameter 6.5 mm with 5 mm ball press-fitted in with certificate (EN ISO) NKW28E10Z Ball holder 28 mm length, diameter 12 mm with 10 mm ball press-fitted in with certificate (EN ISO) L25HBDVG5 Objective lens 2.5x with Brinell SmartLight evo incl. adapter for turret for better evaluation of Brinell indentations (for DV 20/30/200/300/250/350 G5) Z46ZR Base / tool cabinet ZRG for seated and standing use max. specimen weight 500 kg Dimensions (WxHxD): 840 mm x 620 mm x 850 mm Maximum load / drawer: 10kg Best regards

Condition: refurbished (used), functionality: fully functional, Testing method: Vickers Testing forces: HV0.2 / 0.3 / 0.5 / 1 / 2 / 3 / 5 / 10 Scope of supply: - Hardness testing device Rcodpfxjdmz Uzj Ac Tsd - Diamond indenter 136° Vickers - LED lighting - Cross slide table 135 x 135 mm - Objective revolver - Objectives 20X / 40X / 60X Optional: - VMS3 (Video Measuring System) - Digital micrometer screw - PC system

Condition: used, functionality: fully functional, Used tensile testing machine, model Zwick Z2.5 Zwicki, equipped with new control electronics and Windows-based PM-Soft-Smart software for tensile, compression, and bending tests up to 2.5 kN. The testing machine has been retrofitted with a new control unit featuring an MFC controller and can be operated exclusively via PC. Connection to a standard PC or laptop is established via a USB cable. The PM-Soft-Smart Windows software is a highly versatile control and evaluation software, allowing the user to create any number of custom test programs. The delivery also includes a test specification created according to customer requirements. Suitable grips for virtually all testing tasks are available as accessories. Rsdpfx Aeykpamjc Tocd Technical data: Single-column testing machine incl. 2.5 kN load cell Crosshead travel: 800 mm Test space depth: 100 mm Displacement resolution: 0.0001 mm Test speed: 0.2–1000 mm/min Power supply: 230V AC Dimensions (D x W x H): 414 x 320 x 1260 mm Weight: approx. 40 kg