Used Okoma for sale (8)

Condition: used, Year of construction: 1992, For sale is an OKOMA SF 3S tenon cutting machine for processing wooden components. The machine is suitable for use in carpentry workshops, joineries, and wood processing companies. Bedpfjz S Nklsx Anpelp Technical data: * Manufacturer: OKOMA * Model: SF 3S * Machine type: Tenon cutting machine * Year of manufacture: unknown, 1992 * Condition: used

Condition: used, Profiling milling machine with 2 profiling spindles, hardware milling unit, and sanding unit Technical data and equipment 1. Power supply and compressed air * Electrical connection: 3-phase, 380 V, 50 Hz * Compressed air requirement: approx. 13 NL/min * Operating pressure: 8 bar * Compressed air quality: according to Pneurop 6611 Bjdpfx Aoz S Nrponpelp 2. Profiling spindle 1 * Spindle arrangement: right * Drive power: 11 kW * Speed: 7,000 RPM * Direction of rotation: clockwise and counterclockwise * Spindle diameter: 40 mm * Effective length: 252 mm * Max. tool diameter: 230 mm Vertical positioning: * U-shaped movement of the profiling spindle * Pneumatic cylinder with 120 mm stroke * 2 tool positions * Position detection via limit switches Horizontal positioning: * Pneumatic forward and backward movement * Position detection via limit switches * Automatic plunge function with adjustable plunge speed for tear-free milling * Protective and extraction hood with extraction nozzle Ø 140 mm 3. Profiling spindle 2 * Spindle arrangement: right * Drive power: 11 kW * Speed: 7,000 RPM * Direction of rotation: counterclockwise * Spindle diameter: 50 mm * Effective length: 272 mm * Max. tool diameter: 230 mm Vertical positioning: * U-shaped movement of the profiling spindle * Pneumatic cylinder with 90 mm stroke * 3 tool positions * Position detection via limit switches Horizontal positioning: * Pneumatic forward and backward movement * Position detection via limit switches * Protective and extraction hood with extraction nozzle Ø 140 mm 4. Hardware milling unit EG * Spindle arrangement: right * Drive: Three-phase motor, 3 kW * Speed: 6,000 RPM * Spindle diameter: 30 mm * Effective length: 47 mm Positioning: * Vertical positioning: not available * Horizontal positioning: pneumatic forward and backward movement * Position detection via limit switch (rear position) * Protective and extraction hood with extraction nozzle Ø 80 mm 5. Stop system * 1. Stop in front of profiling spindle 1: * Manual chip removal * Quick adjustment via parallelogram guide * 2. Stop between profiling spindle 1 and 2: * Pneumatically adjustable chip removal * 3. Stop behind profiling spindle 2: * Fixed stop 6. Sanding unit * Sanding unit with automatic infeed and outfeed 7. Feed device * Roller spacing (center to center): 130 mm * Roller diameter: 110 mm * Roller width: 50 mm * Feed device can be swiveled away * Pneumatic control of the working stroke 8. Support rail for edge milling * Rail length: approx. 3,000 mm * Adjustment range forward: approx. 100–600 mm

Condition: excellent (used), 2 spindles Blsdpfxs Ag Hafs Anpjp

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Mortising carriage: - Electric feed with stepless speed control - Carriage adjustable in angle - Feed motor 0.46kW - Table size (length/width) 700x450mm, extendable to 1150mm - Cross slide on the carriage – cutting length on the extendable telescope 1860mm - Rotating block in the cross slide - 2 pneumatic clamps Length-cutting saw: - Max blade diameter 380mm - Max cutting height 110mm - Blade adjustable up/down, front/back and in angle - Blade guard - Saw motor 2.2kW Mortising spindle: - Pneumatic spindle stroke - Spindle adjustment up/down and stroke adjustment using knobs - Max tool diameter 320mm - Spindle diameter 40mm - Spindle working height 220mm - Spindle lock - Motor 7.5kW Profiling spindle: - Pneumatic spindle stroke - Spindle adjustment up/down and stroke adjustment using knobs - Max tool diameter 200mm - Spindle working height 220mm - Spindle diameter 54mm - Spindle lock - Sliding support from the table - Motor 7.5kW Saw for cutting window bead: - Max blade diameter 200mm - Blade bore diameter 30mm Bljds Af U Ehjpfx Anpep - Blade adjustable front/back, up/down - Blade guard - Motor 2.2kW Feed: - Number of rollers 8 pcs - Motor approximately 0.55kW - Roller size 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Suction nozzle diameter 60mm, 2x130mm, 110mm, 100mm - Working pressure 6-8 bar - Dimensions (length/width/height) 3600x2100x1600mm, weight approximately 2500kg ADVANTAGES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Length-cutting saw – Mortising spindle – Unpainted, used machine, very good condition Net price: 27900 PLN Net price: 6488 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Tenoning spindle 1 0 Number of milling agregates 2 St. Spindle diameter 40,50 mm Item 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profiles For sale on behalf of a customer; still connected to the mains and extraction system The machines are in excellent condition and can still be demonstrated ----- Manufacturer's Technical Description: Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine ----- Compact, heavy-duty automatic window machine featuring a cast-iron construction, consisting of: Top-mounted cross-cut saw with 12-position turret stop system; Positive-guided saw guard for accident prevention Tenoning spindle: 40 mm diameter x 252 mm length; 2-step stroke mechanism for Blsdpfx Aoy T R Tbsnpjp 3 tool positions (stroke height: 83 mm); Motor: 7.5 kW Sliding table: Adjustable on both sides from 0 to 60 degrees Automatic feed system with various infinitely variable speed settings; dual pneumatic clamping system; Length stop (LAS) with 3-position system, 2300 mm capacity Automatic transfer unit to the profiling section Profiling spindle: 40 mm diameter x 252 mm length Pneumatic stroke: 112 mm (adjustable) for 2 tool positions Motor: 7.5 kW; Spindle horizontally adjustable relative to the tool cutting edge; Adjustable front milling fence jaw Glazing bead saw with 3 kW motor and 4-position turret head adjustment; Heavy-duty articulated feed system, infinitely variable from 0 to 25 m/min. adjustable, Roller groups pivotable inward and outward Counter-stop with 5-position turret head Frame milling unit ----- Item 2: OKOMA Automatic Rebating Machine, Model UF 2 EG ----- Power Specifications: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: Air requirement: 13 NL/min; Operating pressure: 8 bar Conditioned air: According to Pneurop 6611 1. Profiling Spindle 1: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Climb and conventional milling - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Vertical (U-axis) movement of the profiling spindle - Vertical positioning: Actuation: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Actuation: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Automatic plunge mechanism: Plunge speed adjustable to ensure tear-out-free rebating - Safety and dust extraction hood with 140 mm diameter connection port 2. Profiling Spindle 2: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Counter-rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - U-axis movement of the profiling spindle - Vertical positioning: Drive: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Drive: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Safety and dust extraction hood with connection port (140 mm diameter) 3. Hardware Routing Unit EG: - Spindle arrangement: Right - Drive: 3 kW three-phas...

Condition: not inspected (used), Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small-scale window manufacturing consisting of: The machines remained in working order at our customer's site until they were dismantled ----- 1) Haberkorn FZS1 slotting machine. 2) Okoma SF3F table milling machine with glazing bead saw. 3) Oertli tooling for the Haberkorn and Okoma machines. 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. (Hardware can be converted for an additional charge upon request!) ----- Technical Manufacturer's Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Pneumatic horizontal positioning, manually adjustable - Guard and dust extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Working length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via Precision ball screws - Guard and dust extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterweight (programmable) - Pneumatic clamp - High-precision electric degree indicator - Automatic length compensation - Counterweight at every angle setting in the cutting plane Optional equipment: Blsdpfx Anexa Hi Nopjp - Laser for workpiece positioning - Pneumatic saw position - Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Dust extraction ports 2 x 120 mm - Spindle length 270 mm - Counter gauge with fine adjustment and turret - Triple stroke, maximum stroke height 90 mm - Glass strip cutting saw with protective and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for the glass strip cutting saw attachment - Pneumatically controlled dispensing unit for edge drive, speed 6000 rpm - 2 x 3 kW motors - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set of wood window IV 68/78/88 - 1 set of wood-aluminum window IV 68/78 Tools are sold in the condition, scope, and with accessories as currently available in our stock. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems mentioned and drawn. [Note regarding window cuts, tool drawings, and tool system listings:] ----- 4) Götzinger OBM Plus Corner Hinge and Olive Drilling Machine -Corner and scissor hinges + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x Olive drill head 24 mm -1x Double-head corner hinge -Maco MultiMatic fitting -1x Adjustable flip stop, left, with 6 stops -1x Adjustable flip stop, right, with 6 stops -1x Machine stand complete with storage tray -220/400 V, 60 Hz, 1.3 kW ...

Condition: ready for operation (used), Year of construction: 1988, Window manufacturing machine Manufacturer: Okoma Model: UF1 S Year of manufacture: 1988 Bjdpfoyk Haqex Anpslp with tool

Condition: good (used), Year of construction: 1980, well-preserved slotting machine from the reputable manufacturer Okoma, with 40 mm spindle Bledoxvllzjpfx Anpjp