Used Optisaw S 131 Gh for sale (96,645)

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Kjdpfxswqqv Do Agzonf

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,060 nm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, table length: 3,100 mm, table width: 1,550 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 150 mm, positioning speed: 169 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 14 bar, overall weight: 8,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,500 mm, warranty duration: 12 months, space requirement height: 2,500 mm, space requirement length: 6,200 mm, space requirement width: 5,800 mm, Equipment: cooling unit, safety light barrier, Our space-saving model: G3015 HF mini 12KW fiber laser cutting machine with side-mounted shuttle table The HF mini is our space-saving, very compact fiber laser cutting machine with a side-mounted shuttle table. Your perfect entry into the professional production of laser parts and series production. This machine is ideal for steel fabricators, sheet metal processors, and series production companies that want to cut up to 50mm of steel with 12kW laser power and minimize post-processing of the parts. Thanks to its high energy efficiency, this machine can save up to 25% energy compared to a comparable plasma system or a CO2 laser system with the same cutting power. Alternatively, this machine can also be equipped with a 20kW laser source. This increases the cutting speed by up to 50%. When replacing an old CO2 laser machine, you can even apply for government funding of up to 15% of the investment. Contact us! German customer service in the Rhineland region of North Rhine-Westphalia with a 400m² spare parts warehouse. German-speaking telephone and on-site support with short response times. All of our machines are installed and serviced by us. 80% of the machine technology is made from German or European components. 1.5 x 3m cutting area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 400 Maximum speed [m/min]: 169 Acceleration: 1.7 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 6200 Width [mm]: 5800 Height [mm]: 2500 Maximum sheet weight [kg/table]: 2150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity at 6 kW Steel - 25 mm, stainless steel - 18 mm, aluminum - 18 mm Cutting capacity at 12 kW Steel - 50 mm, stainless steel - 50 mm, aluminum - 50mm • Side-mounted shuttle table ideal for small production halls • Fully enclosed, ensures laser safety • Compact design saves shipping costs and reduces installation time • Better accessibility thanks to the full-length side sliding door • Ergonomic loading and unloading for small workpieces Knedpfov Nzvysx Agzsf • High dynamics and productivity thanks to the powerful controller and motors • Integrated control cabinet and laser source with maintenance-friendly access • Fast service response thanks to "Remote Service" • Fully enclosed machine with OD5+ laser safety glass windows • Small footprint • Thanks to the adjustable control panel, front door, and side sliding door Higher dynamics & productivity • Thanks to the optimized machine bed and the extruded aluminum gantry, equipped with the fast, real-time Han's 901 (Rexroth) controller and powerful Rexroth motors, the HF Mini S achieves very high speeds and acceleration. Component Configuration and Selection Control System: Han's 901 (Rexroth, Germany) Servo Driver: Rexroth, Germany Cutting Head: Precitec, Germany Linear Guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo Valve: Lanny, Germany Machine Frame: Han's, China Gantry: Han's, China Z-Axis: Han's, China Shuttle Table: Han's, China

Condition: good (used), metal detector S+S Knedpfx Agotu Nnuszsf for sorting metal parts from a material flow. The material passes through a chute and the metal parts exit from another chute. chute inlet 70mm . sold with stand, height 2m.

Year of construction: 2006, condition: excellent (used), Device is functional and was only used for experimental purposes Knodpfxoh Im Eqe Agzsf Funnel is included

Condition: new, functionality: fully functional, machine/vehicle number: S-CL-100-FN-EC, input voltage: 230 V, overall weight: 17 kg, total width: 250 mm, total length: 250 mm, total height: 475 mm, volume flow: 134 m³/h, Equipment: type plate available, ISI S-CLEANER Mechanical air filtration unit (solder fume) for up to 1 workstation Type: 100 FN Version: conditionally mobile (glide runners/no wheels) Control: none Horizontal, conditionally mobile mechanical air purifier with EC- radial fan for the separation of solder fumes. TECHNICAL DESCRIPTION: Air volume: - 134 m³/h (air flow rate) - 100 m³/h (effective air capacity) (depending on the filter assembly, without collecting elements) Suction nozzle: NW 50 mm (rear) Filter assembly: - Pre-filter - HEPA filter H13 - Activated carbon cassette (refillable) Color: RAL 7035 light gray Voltage: 230 V Knedowpu Twepfx Agzef Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air capacity: not adjustable Dimensions: Length 250 mm / Width 250 mm / Height 475 mm Weight: 16.5 kg

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V -0,7 A -50 Hz -IP 65 Knsdpfx Agjk Eakvjzef

Year of construction: 1995, condition: ready for operation (used), There are four Wrapping Machines H&S available, year of construction: 1x 1984, 1x 1986, 2x 1995. Ksdpfoipv D Uox Agzsnf

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, laser wavelength: 1,060 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,100 mm, table width: 1,550 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 2,000 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 14 bar, overall weight: 7,000 kg, total length: 6,000 mm, total width: 2,500 mm, total height: 2,500 mm, warranty duration: 12 months, space requirement height: 2,500 mm, space requirement length: 6,000 mm, space requirement width: 2,500 mm, Equipment: cooling unit, safety light barrier, G3015 HF Mini S 6KW Fiber Laser Cutting Machine The HF Mini S is a high-quality, very compact fiber laser cutting machine. Your perfect entry into laser part production. This machine is ideal for small steel fabricators and sheet metal processors who want to cut up to 25mm (with 6kW steel laser power) and minimize post-processing of the parts. Thanks to its high energy efficiency, this machine can save up to 25% energy compared to a comparable plasma system with the same cutting power. Alternatively, this machine can also be equipped with a 12kW laser source. This increases the cutting power to 50mm steel, stainless steel, or aluminum. German customer service in the Rhineland region of North Rhine-Westphalia with a spare parts warehouse on 400m² of storage space. German-speaking telephone and on-site support with short response times. All of our machines are installed and maintained by us. 1.5 x 3m cutting area X-axis [mm]: 3100 Y-axis [mm]: 1550 Z-axis [mm]: 180 Maximum speed [m/min]: 120 Acceleration: 1.5 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 6200 Width [mm]: 2500 Height [mm]: 2500 Maximum sheet weight [kg/table]: 2150 Available laser power: 3 kW, 6 kW, 12 kW Cutting capacity at 6 kW Steel - 25 mm, stainless steel - 18 mm, aluminum - 18 mm Cutting capacity at 12 kW (additional charge) Steel - 50 mm, stainless steel - 50 mm, aluminum - 50mm • Fully enclosed, ensures laser safety • Compact design, saves shipping costs and reduces installation time • Better accessibility thanks to the full-length sliding side door • Ergonomic loading and unloading for small workpieces • High dynamics and productivity thanks to the powerful controller and motors • Integrated control cabinet and laser source with maintenance-friendly access • Fast service response thanks to remote service • Fully enclosed machine with OD5+ laser safety glass windows • Small footprint • Thanks to the adjustable control panel, front door, and side sliding door Higher dynamics & productivity • Thanks to the optimized machine bed and the extruded aluminum gantry, equipped with the fast, real-time Han's 901 (Rexroth) controller and powerful Rexroth motors, the HF Mini S achieves very high speed and acceleration. Kodpfx Agjv Nzrbszonf Component Configuration and Selection Control System: Han's 901 (Rexroth, Germany) Servo Driver: Rexroth, Germany Cutting Head: Han's, China Linear Guide: PMI, Taiwan (China) Rack: Svarog, Czech Republic Gearbox: Shimpo, Japan Servo Valve: Lanny, Germany Machine Frame: Han's, China Gantry: Han's, China Z-Axis: Han's, China Shuttle Table: Han's, China

Condition: as good as new (ex-display), Year of construction: 2025, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Kedpjw I R Rnefx Agzjnf Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Year of construction: 2010, 1 x Tool Dispensing System K & S Toolserver Year of manufacture: approx. 2010 Capacity: up to 2864 boxes (smallest box) Installation dimensions: Width: 1009 x Depth: 2431 x Height: 2069 mm Weight: 750 kg Max. payload: 800 kg Max. load per box: 4 kg Knedpfx Aowktl Uogzof (see photo for further technical data) The device can be viewed directly in operation with power on.

Condition: new, functionality: fully functional, machine/vehicle number: S-CL-250-FN-EC, input voltage: 230 V, overall weight: 35 kg, total width: 430 mm, total length: 340 mm, total height: 600 mm, volume flow: 250 m³/h, Equipment: type plate available, ISI S-CLEANER Mechanical air filter device (soldering smoke) for up to 2 workstations Type: 250 FN Version: Mobile Control: without Knodpfx Agovrylfezof Horizontal, mobile mechanical air cleaner with EC radial fan for separating soldering smoke. TECHNICAL DESCRIPTION: Air volume: - 240 m³/h (volume flow) - 170 m³/h (effective air output) (depending on the filter configuration without collection elements) Intake nozzle: 2 x NW 50 mm (rear) Filter configuration: - Pre-filter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Dimensions: length 340 mm / width 430 mm / height 600 mm Weight: 35 kg

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Kodpfelatz Dsx Agzenf Belt width: 390 mm Belt length: 2000 mm

Condition: ready for operation (used), T&S ConturoMatic T2 Contour Measuring Device Optical-incremental measuring system Measuring speed 0.1...3.0 mm/s Positioning speed up to 25 mm/s Measuring point spacing 0.5...25 µm Accuracy ±(0.9+L(mm)/100) µm Radius accuracy ±0.005% of the nominal value at R 12.5 mm Distance accuracy ±(1.2+L(mm)/100) µm Angle accuracy ≤ 30'' Technical data has been adopted. You are welcome to visit us for a viewing. We would be happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. Kedpfswak Nvjx Agzenf For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: good (used), Year of construction: 2023, functionality: fully functional, Rotor is a machine for spray cleaning and flood cleaning. The basket is inserted into the chamber manually or automatically. It is possible to adjust the rotation speed of the basket and the type of movement - full rotation or swiveling. Hot air drying is included in the basic model, but can be supplemented with vacuum drying. In this version, the system has two separate tanks, one for cleaning and one for rinsing. Data: Cleaning area 300 x 450 mm H 300 mm Knsdpfx Asl Rbk Rjgzsf Load 50 kg Exterior dimensions: Width 140 cm Depth 220 cm Height 220 cm Loading weight 50 kg Capacity of tank 1 500 l Tank 2 capacity 500 l Pump 1 1.5 kW 2.5 bar 200 l/min Pump 2 1.5 kW 2.5 bar 200 l/min Heating tank 1 16 kW Heating tank 2 16 kW Steam condenser 0.20 kW Tank emptying pump 0.37 kW Drying 7.5 kW Ultrasound (peak value/effective) 2 kW/ 1KWkW

Condition: new, Year of construction: 2025, Drum chipper series ATH 220 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm Knsdpfjwbv Ersx Agzsf - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: excellent (used), Loos UL-S 2000kg/h 13Bar Knodpfx Ageu I Ry Ajzsf

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: MA / 03 - 718, PRODUCTION LINE FOR THE PRODUCTION OF 330 X 330 MM ¼ AND 330 X 420 MM 1/6 FOLD NAPKINS PRICE: PRINTING MACHINE Producer: S-d-f Model: Omega Plus 8/500 09/2004 Serial number: MA / 03 - 718 Production date: 2004 EQUIPMENT 1. Single shaftless unwinder for reels up to: 1500 mm with lift • intake for roll core R 76 mm • single motor drive with multi-V-belt • drive speed controlled by dancer • automatic machine stop at reel end • dust removal system 2. Calendering Unit • for equalizing the tissue thickness, reducing of dust, and improving the printing quality • single motor drive • hardened and ground cylinders • Web tension measuring roller for single drive control with mechanical stop 3.Web Aligner No. AND • BST web aligner positioned in front of printing station 4. Flexographic Printing Press • 2 printing tower frames for max eight (8) printing units • s-wrap pull rollers and guide roller • moveable operating platform for operating the printing units • touch panel operator • range format 330 mm 2 • single drive for each printing unit • motorized 360° radial register • angle synchronizer Knjdpfxownx N Ho Agzjf • quick-change device for plate cylinder (with spherical valves) • integrated quick-change device with air support for printing plate sleeves • automatic register pre-adjustment ('Make-Ready') • ceramic coated anilox roller • 2 sets mounting cylinders – for 330mm (Lunch) and 420mm (Buffet) napkins formats • ink level detector with acoustic or visual alarm • lifting and dropping of ink trays • protection covers, safety switches 5. Web Inspection Device Type BST 6. Infrared Drying Equipment • two drying infra-red cassettes • drying cassettes separately adjustable • cassette cooling by integrated fans (with temperature control) • automatic shut-off and lifting upon printand machine stop 7. BST Web Aligner No. II for embossing 8. Double embossing station • two-position embossing station • two sets rollers for embosiing – Formats: Lunch 330x330mm, Buffet 330x420mm) 9. Folding frame 10. ¼ Folding Head 11. Manual product transfer to the packaging machine. 12. Electrical Equipment TECHNICAL DATA Max printing speed: 300m/min Real speed printing: 230m/min Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Control – Siemens S7 Max Power: 93 KW 3 PACKING MACHINE Producer: Senning Model: 522 SE/M Serial number: 71,660 Production date: 2004 Formats: • Lunch 330 x330 mm ¼ folded • Buffet 420 x 330 mm 1/6 folded • minimum package height 18mm • maximum package height 40 mm. TECHNICAL DATA Maximum packing speed: 60 packs/min Standard packing speed: 40 packs/min Foil material: • Polyethylene (PE) – 35-40um • Polypropylene (OPP) – 22-28um • Polypropylene (PP) 35-40 um. • Core from foil diameter – 76 mms ELECTRICAL DATA Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Max power: 20 KW.

Condition: excellent (used), Steam cleaner for crates/containers 60x40 Brand Maskinfabrikken Hillerslev a/s, plastic chain, belt width: 350 mm, clearance: 650 mm x 200 mm, Ksdev Ey Ugepfx Agzonf overall dimensions: 7300 mm x 1500 mm x 2000 mm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: EcoPurge30, pneumatic purging pump for 2K-metering pump max. flow: 6l/min max. pressure: 21MPa pressure ratio: 30:1 Knsdpfspz H Hqex Agzjf

Condition: new, Year of construction: 2025, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW Knedpfxsuz Hmxj Agzsf - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 01 - 346, year of last overhaul: 2025, PRODUCTION LINE FOR THE PRODUCTION OF 330 X 330 MM AND 250 X 250 MM ¼ FOLD NAPKINS 1. Single shaftless unwinder for reels up to: 1500 mm with lift • intake for roll core R 70 or 76 mm • max roll weight 350 kg • single motor drive with multi-V-belt • drive speed controlled by dancer • automatic machine stop at reel end • dust removal system 2. Calendering Unit • for equalizing the tissue thickness, reducing of dust, and improving the printing quality - Ø 254 mm • single motor drive • hardened and ground cylinders • Web tension measuring roller for single drive control with mechanical stop 3. Web Aligner No. AND • BST web aligner positioned in front of printing station 4. Flexographic Printing Press • 2 printing tower frames for max eight (8) printing units • s-wrap pull rollers and guide roller • moveable operating platform for operating the printing units • push-button operator panel • maximum format range 500 mm 2 • single drive for each printing unit • motorized 360° radial register • angle synchronizer • quick-change device for plate cylinder. • integrated quick-change device with air support for printing plate sleeves • ceramic coated anilox roller • 2 sets mounting cylinders – for 330mm (Lunch) and 500 mm (cocktail) napkins formats • ink level detector with acoustic or visual alarm • lifting and dropping of ink trays • protection covers, safety switches 5. Web Inspection Device Type BST with S-VGA Monitor 6.Infrared Drying Equipment • two drying infra-red cassettes • drying cassettes separately adjustable • cassette cooling by integrated fans (with temperature control) • automatic shut-off and lifting upon print end machine stop 7. BST Web Aligner No. II for embossing 8. Double embossing station • two-position embossing station • two sets rollers for embosiing – Formats: Lunch 330x330mm, cocktail 250x250mm 9. Folding frame 10. ¼ Folding Head 11. Manual product transfer to the packaging machine. 12. Electrical Equipment TECHNICAL DATA Max printing speed: 300m/min Real speed printing: 200 – 230 m/min Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Control – Siemens S7 Max Power 93 KW. 3 PACKING MACHINE Producer: Senning Model: 522 SE/M-30 Serial number: 71,155 Production date: 2002 Formats: • Lunch 330 x330 mm ¼ folded • cocktail 250 x 250 mm 1/4 folded • minimum package height 18mm • maximum package height 40 mm. TECHNICAL DATA Maximum packing speed: 30 packs/min Standard packing speed: 30 packs/min Foil material: • Polyethylene (PE) – 35-40um • Polypropylene (OPP) – 22-28um • Polypropylene (PP) 35-40 um. • Core from foil diameter – 76 mm ELECTRICAL DATA Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Max power 20 KW. Kedpfxjwnxglj Agzenf

Year of construction: 2025, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. Ksdpfx Aoin Ey Ssgzenf The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Year of construction: 2025, condition: new, Screening plant for loading wood pellets, stationary New production Screening capacity: 10 - 50 t/h (depending on design) consisting of: - Modul-Silo type M-300 (45 °) - Oscillating screen type ASM - Conveyor belt type MFB incl. magnetic separator - Veralde set // MODULFLEX loader - Pipe screw conveyor (option) - Dust extractor (option) Functional description and mode of operation: The pellets are fed into the modular silo by means of a wheel loader. The pellets then pass through the ASM oscillating screen. The screen separates the pellets into two size classes (pellets and dust). The screened pellets are loaded into the silo vehicle by means of a conveyor belt and loading equipment. Thanks to the integrated level indicator in the loading set, the system switches off automatically when the silo vehicle is sufficiently full. The dust fractions are discharged by means of a screw conveyor. To minimise the dust load, it is possible to equip the screening plant with an additional dust extractor type NE. The capacity of the screening plant (depending on the design) is between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening capacity - High separation efficiency Knedeinkw Aopfx Agzef - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you. We look forward to your feedback!

Year of construction: 2025, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Kjdpfxjin Ewle Agzsnf Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Year of construction: 2025, condition: new, Screening plant for loading wood pellets, semi-mobile New production Screening capacity: 10 - 50 t/h (depending on design) consisting of: - Trough belt conveyor type TFB - Screening machine type ASM - Troughed belt conveyor type MFB incl. magnetic separator - Veralde set // MODULFLEX loader - Pipe screw conveyor (option) - Dust extractor (option) Functional description and mode of operation: The pellets are fed into the trough belt conveyor (incl. bunker attachment) by means of a wheel loader. The pellets then reach the oscillating screen type ASM. The screening machine separates the pellets into two size classes (pellets and dust). The screened pellets are loaded into the silo vehicle by means of a trough conveyor belt and loading equipment. Thanks to the integrated level indicator in the loading set, the system switches off automatically when the silo vehicle is sufficiently full. The dust fractions are discharged by means of a screw conveyor. To minimise the dust load, it is possible to equip the screening plant with an additional dust extractor type NE. The capacity of the screening plant (depending on the design) is between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Knsdpfxjiux Tfs Agzof Please contact us! We will be happy to advise you.