Used Ott Tornado for sale (72)

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Nominal volume flow Vnenn 750 m³/h, suction nozzle D=100 mm, minimum volume flow Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz - Hnjdpjv Azfzjfx Ahyog

Condition: used, Year of construction: 1994, operating hours: 5,373 h, functionality: fully functional, machine/vehicle number: M/6176, total length: 9,000 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 4,000 kg, Edgebander Operating hours: 05373.33 h (read) Processing units: Upper pressure line KAM 4-2 01 Rapid heating tank KAM 4-61-02.01 Lower pressure line KAM 4-1-01 Hsdowf U E Sjpfx Ahyjng Edge feeding table KAM 4-4-01 Automatic Magazine for solid edges and foils Feed roller KAM K4-51-01 KAM travelling foil shear Cutting device model type K 17 Fixed milling machine KAM 4-50-00 model type NF 30.1 Fine milling machine KAM 4-26-80 Slot milling machine KAM 4-32-01 Rounding corners Grinding device Scraper unit Oscillating edge cleaning unit KE-0 Dimensions: approx. 9,000 x 1,400 x 2,000 mm Weight: approx. 4,000 kg

Condition: used, Year of construction: 1993, with prejoiningused, good conditionmake Otttype Kantomat 156- FÜyear 1993glue thickness 15 mmworkpiece height min 10 mm max 60 mmworkpiece width min 60 mmworkpiece length min 60/160 mmthick edges up to 3 mmcaps from the roll up to 3 mmprejoiningcross-cutting unit K 14 / 2 x 1,1 PSflush milling HF15.1 2 x 1,5 PSChamfer 082 2 x 0,8 PS 0-45° swivelingRadius milling 2 x 0,8 PSRadius scraper controlled pneumaticBuffing oscillating pneum. with pneum. feed 2 x 0,3 HPautom. edge magazinefeed speed steplessgranulate quick heating basinsound insulation hoodlarge roller supportsuction connection D 160 mmspace requirement approx. 7400 mm x 1000 mm x 1600 mmtotal connected load 22 kWstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Hnedpfsvwfyfsx Ahyjg

Condition: used, Year of construction: 2001, functionality: fully functional, Used, fully functional OTT PACIFIC for sale! Machine length: 6.30 m! Hedpexc Hhksfx Ahyjng

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pacific P V 12 - F, year 1999 Power: 12.5 kW Edge thickness: 0.2–12 mm Feed: 12 m/min Glue application roller, synchronous and counter-rotating Automatic infeed fence Jointing/edge trimming End trimming up to 3 mm Flush milling at 15°, 30°, 45° Radius milling R 2 – R 5 Flush sawing Hnjdpfxow Ni Nrs Ahysg Corner rounding Radius scraper blade Schwabbl cleaning unit Extendable roller support Compressed air: 6 bar Dimensions: 5400 x 1000 x 1400 mm Weight: 2300 kg

Condition: used, Year of construction: 2010, Touch screen control for adjusting work groups Panel height mm from 10 to 50 Solid wood 12 mm Pvc/Abs mm from 0.4 up to 3 Feed speed up to 22 m/min Minimum panel length 150 mm Minimum panel width 70 mm Working height adjustable electronically by C.N. Motorized rubberized belt with superior pressure Hsdpfxjpzfcgj Ahyeng Panel support guide Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier group with two motors of 1.5 KW each Reel holder plate COMBIMELT gluing unit for hot melt glue with automatic dosing VarioMelt with pre-melter Patented edge pressure unit with segmented pads Trimming unit with 2 motors Gleaning unit with 2 motors Rounding unit Edge scraper unit Installed power KW 13.7 Machine length mm 6170 approx TECHNICAL DETAILS TO BE CHECKED

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), Ott veneer press Hsdpfjtwp Iwsx Ahyjng connected load 380V 9kW Panel size 2250 x 1350 mm Elkom heating plates, gold anodized Plates and hydraulics in order

Condition: excellent (used), 2 pre-cutters gluing unit Guillotine Hedpfxeulh Nuj Ahyong Drip unit with 2 saws Straight cutter Rounding cutter

Condition: used, Year of construction: 1984, Special pressing size, large pressing depth 1600 mm Pressing length 2750 mm Plate size 2750 mm x 1600 mm Hnsdsv Hhudspfx Ahyeg - 2.75 x 1.60 m - with 3 heating plates 2 levels incl. control system – newly retrofitted retrofitted Used, in good condition Manufacturer: Ott Model 300 K 135 Year of manufacture: 1984 Machine number: 13741 Number of levels: 2 pieces Cover sheets hard-anodized Plate size approx. 2750 mm x 1600 mm Opening width approx. 185 mm Tip control Safety cable below Side guidance Electrical heating Specific pressing pressure max. 5.5 Piston diameter 90 mm Lower pistons: 6 units Original price approx. €40,000 Space required approx. 3600 mm x 1600 mm x 2000 mm Total connected load 49 kW Storage location: 97447 Gerolzhofen, loaded free, unpacked Delivery in the current as-inspected condition, without warranty or guarantee

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Hnsdpfxegmn H As Ahyog

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS GLUING UNIT, FLUSHABLE FOR PU ADHESIVE LINEAR CUTTING UNIT, SWIVELABLE FLUSH MILLING UNIT 2X1.9 KW RADIUS MILLING UNIT RADIUS SCRAPER COPY MILLING UNIT WITH 2 MOTORS SURFACE SCRAPERS TOUCHSCREEN CONTROL PANEL Hnodpfsv I Sayox Ahyog EDGE THICKNESS UP TO 20MM MACHINE LENGTH 7.90 M

Condition: excellent (used), Gold anodized panels Working dimensions 2.5 x 1.1 m Electric heating Fully functional, tested You can call or write to us. We speak and write German and Russian. Hsdju I N D Hopfx Ahyjng You can also send messages in English. 31.3.5

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, grinding width: 1,100 mm, "M.-No. 2679, built 1991, Technical data: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm, sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec., feed speeds: 4 + 8 m/min, Motor power sanding unit: 11 kW, power setting: 0.55 kW, feed carpet: 1.3/1.8 kW, operating pressure: 6 bar, air requirement: 10 l/min., extraction sockets: 1 x 150 + 1 x 120 mm, WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg, Hnjdpjtppz Iofx Ahyjg Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding pad with automatic insertion and removal - Rigid sanding pad for solid wood frame sanding - Brush roller driven by the sanding unit - Automatic centering of the feed carpet - Feed carpet with high-quality rubber circular hole carpet and auto. Carpet centering - pneumatic sanding belt tensioning with length compensation - non-contact sanding belt oscillation, electronic - low-wear disc brake system for immediate stop of the sanding belt drive with pressure monitor - motorized thickness adjustment with digital display - workpiece thickness limiter at the infeed - semi-automatic workpiece thickness adjustment - grit thickness compensation for contact roller 4-fold, special accessory: workpiece thickness gauge".

Condition: excellent (used), Adhesive unit Guillotine Chop saws Hjdpfxorzaavj Ahyeng Straight cutters Scraper Polishing machine Without pre-milling

Condition: used, Year of construction: 1999, Edge thickness: 0.2 - 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (strip edging) Minimum length: 60 mm (from coil) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port diameter: 160 mm Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment/features: - Double top pressure with electronic height adjustment - Automatic magazine for coil edging up to 800 mm diameter - Pneumatic guillotine for strip edging up to 3 mm - Automatic infeed fence Pre-milling unit: with 2 HF motors, 1.5 kW, 12,000 rpm Double cross-cut saw: - 2 HF motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Hsdpow Amt Nefx Ahyong Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Radius trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Surface scraper Year of manufacture: 1999

Year of construction: 1998, condition: excellent (used), table height: 2,250 mm, table width: 4,000 mm, Extra large heat press! For sale in excellent technical condition. Hsdpfswfp R Aox Ahyeng

Condition: used, Year of construction: 1996, functionality: fully functional, Equipment: CE marking, Brusilica radne sirine 1300 mm. U dobrom stanju. Hnjdewptrrspfx Ahyjg

Condition: used, functionality: fully functional, 0,75 kW Spraying device Lamella star 150/70/25 mm sisal/leather/plastic fabric Lamellar star 150/70/25 mm sisal/plastic fabric Flanges 70 mm reduced to 11 mm (2 pcs.) Metal Control panel top 4 motors à 0,18 kW for brushes Hjdpoigaf Rofx Ahyong

Condition: ready for operation (used), Shelf length 250 cm Shelf width 110 cm Clearance 40 cm Motor 1.1 kW 4 hydraulic cylinders Hnedpfx Ahjwx H Hbeyog

Condition: excellent (used), Year of construction: 2001, Ott Atlantic V/12 edge banding machine Joining unit snipping, 2 x routing, radius scraper, surface scraper Hnedpfx Ajtdz Tqshysg Edge thickness: 0.2 - 12 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Condition very little used year of construction 2001 price 10000

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Ott Atlantic V6 edge banding machine capping, 2 x milling, radius scraper, cleaning disks Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Condition very little used Hedpfx Aor Elhvjhyeng year of construction 1999 price 5500.-

Condition: ready for operation (used), Manufacturer: OTT Type: TKS working height: 800 mm Dimension: W 1.060 x L 720 x H 930 mm Hedpfx Aohir A Hehysng weight approx.: 120 kg Condition: used