Edge trimming device, edge trimming machine

OTT TKS 1

Condition: used, Year of construction: 2010, machine/vehicle number: AB/203002, functionality: fully functional, cutting length (max.): 3,200 mm, SECOND-HAND CIRCULAR SAW SCM MOD. SI450 EP CLASS - Carriage mm. 3200 - Motor Hp 10 - Inverter for speeds change - Motirzed scoring unit adjustement - Serial number AB/203002 Ijdpfx Aox Runqob Tstc - Year 2010 (CE)

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system Ijdow I Uxcspfx Ab Tjtc - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable via pneumatic connection, can be raised and lowered Trimming length 2800 mm speeds 600/5000/4000/3000 rpm via V-belt Electric tilt with digital display Electric height adjustment with digital display Cutting width 1000 mm rear support table 950 x 400 mm wide angle fence 2500 mm with extension 2840 mm with 2 stops suction connection 120 mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Trimming fence Air requirement for scorer 6bar connection Ijdpfoq Au Huox Ab Tstc

Year of construction: 1999, condition: good (used), Edgebander Biesse Polymac ERGHO 5, year 1999 Biesse Italy S/N 80709 max. panel thickness 10-45 mm min and max banding strip heught 13-60mm max thickness of banding material in rolls: 0,4mm- 3mm min. panel width 50 mm min. length 150 mm operating speed m/min 10/20 Technical information: Glue Pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting Edge Trimming unit +Chamfering RI 700 Compact edge scraper RBK501 Brushes SP700 Edge Sanding unit LV 700 heated infeed guide PLC control panel support guide Ijdsgtx Aqspfx Ab Tstc Large diameter roll holder edge cutting device for 3mm thick rolled edges 400 V , 50 Hz CE- marked Dimensions of the Maschine: ( Lx W x H ) = 4950mmx 1700mm x 1530mm 2900 Kg Technical information under subject of correction

Condition: repair required (used), functionality: fully functional, mileage: 287,268 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,000 kg, first registration: 04/2010, emission class: euro5, color: grey, tire size: 17 Zoll, number of seats: 9, Year of construction: 2010, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, sliding door, traction control, trailer coupling, winter tires, ATTENTION – The engine has increased oil consumption and slight vibrations due to a defective dual-mass flywheel. The vehicle is therefore sold as defective without warranty. The vehicle is fully roadworthy. The vehicle registration certificate has expired. Equipment: ABS, ASR, ESP, driver's airbag, passenger's airbag, third brake light, electrically adjustable exterior mirrors, electric windows, headlight range adjustment, fog lights, radio central locking and immobilizer, air conditioning, hands-free system, height-adjustable driver's seat with armrest, cup holder, power steering, leather-wrapped steering wheel, steering wheel adjustment, cruise control, CD-MP3 radio, sliding door on the right, rear hinged doors with window, rear window heater with wiper, winter tires, rubber cargo floor, cargo securing eyes, sliding window on the left, 17-inch tires, 17-inch chassis, trailer hitch, DPF EURO5 Itedpfx Aewmqdaeb Tec Total weight: 3000 kg, towing capacity: 2500 kg Subject to change and errors.

Condition: ready for operation (used), Year of construction: 2019, This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information. Itodpeyabkvjfx Ab Tjc • Machine Condition: Very good • Maximum Saw Blade Diameter (with Mounted Scorer): 400 mm • Maximum Saw Blade Projection from Table at 90° / 45°: 140 / 97 mm • Cutting Width on Rip Fence (Rip Capacity): 1000 – 1500 mm • Maximum Squaring Stroke of Sliding Table Saw: 3200 – 3800 × 3200 mm • Three-Phase Motor Starting From: 7 kW (8 kW) / 50 Hz (60 Hz)

Condition: excellent (used), functionality: fully functional, Panel saw Martin T72a Sliding table length: 3200 mm Cutting width to the right: 1250 mm Maximum cutting height: 170 mm Scoring unit Hydraulically adjustable cutting height Itjdpfxoya Hpqe Ab Toc Hydraulically adjustable cutting angle Right rip fence hydraulically adjustable Saw blade size min/max: 200–500 mm Scoring saw blade: 120 mm Saw blade speed, variable via belts: 2800-4000-5500 rpm Main motor: 5.5 kW Scoring unit motor: 0.75 kW CE certificate Technical documentation

Condition: used, machine/vehicle number: 008367, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Isdpfxox Swfhj Ab Totc Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 1999, Holz-Her SPRINT 1411 edgebander Description Workpiece thickness min./max. 6/45mm Automatic edge feeder (coil up to 5mm) Workpiece min. 60mm Workpiece length min. 180mm Cartridge glue system (short heat up time 2-3 min.) End trimming unit Flush trimming unit Scraping unit (flat) Buffing (brushing) unit CE Itsdjw Ebrxepfx Ab Tjc (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf).

Condition: used, Unit 1: Oscillating sanding unit Unit 2: Top and bottom milling unit Unit 3: Profile sanding unit Workpiece height: 20-90 mm Accessories: For edges R5 Iedpfeyb Sdcex Ab Tjtc Edgebanding machine Rehnen type KBA for automatic processing and rounding of edges on wood and panel materials. The machine is suitable for precise sanding, deburring, and rounding of workpiece edges, ensuring consistently high surface quality. Ideal for joineries, furniture manufacturing, and industrial woodworking. Includes spare sanding belts and cutters.