Used Ott Edgebanders for sale (69)

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Bwedpfexymfwjx Aftsi Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg

Condition: ready for operation (used), Year of construction: 2005, Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details. • Adhesive application: Hot/cold melt adhesive process; application roller with synchronous and counter-rotation • Edge thickness: 0.3–10 mm • Workpiece thickness: 8–60 mm • Workpiece width: minimum 70 mm • Workpiece length: minimum 150 mm • Operating pressure: 6 bar • Feed power: 3.0 kW • Feed speed: 14–20 m/min • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air speed (minimum): 20 m/s • Compressed air consumption: approx. 300 l/minProcessing units / equipment on the machine: • Joining: • 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combi-melt gluing unit: • Top-mounted, changeable hopper for EVA, PUR hot melt adhesive or cleaning granulates; hopper volume 2.5 l • AKM (automatic edge magazine): Bwjdpfxeyn I U Rj Aftoi • Automatic edge magazine with optical monitoring for strip edges in fixed lengths • Capping: • 2 x 0.8 kW, n=12,000, 200 Hz; automatic swivel 0°/5°; 2 HM saw blades Ø140 x 3.2 x 16, z=34 • Flush milling: • 2 x 0.7 kW, n=12,000, 200 Hz; single-sided probing; 2 carbide-tipped indexable knife heads HF70, Ø70 x 20 x 16, z=4 • Fine milling (bevel 15°/30°/45°): • 2 x 0.3 kW, n=12,000, 200 Hz; double-sided probing; 2 carbide indexable insert cutter heads HF70, Ø70 x 20 x 16, z=4 • AWSR (radius R2–R5): • 2 quick-change sets for fine milling cutter, 2 x 0.3 kW; 2 carbide indexable insert cutter heads AR73 x 16 x 16, z=3, R2–R5 • AKF (copy milling): • Automated copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper blade: • 2 x carbide scrapers, automatic feed • Surface scraper: • 2 x carbide scrapers, with fine adjustment device • PU set: • 5-way spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent), fine buffing device with cloth disc • Edge cleaning: • 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: - Round pot glue application unit - With second glue application unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end cap cutting - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfering - Radius scraper blade: pneumatically operated, post-processing of radii - Surface scraper blade: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray device - Control: PLC with control panel Bsdpoyqanbefx Aftjwi - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Availability: short notice Location: Röllbach

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations) Bsdpfx Ajyaq Rfeftowi

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1991 Plate size: 2200 x 1100 mm Equipped with Busse aluminum energy-saving plates (The spots visible in the photos are purely optical; the plates are in perfect condition) Total pressing force: 80 t Press cylinders: 4 x 90 mm Opening stroke: 400 mm Weight approx. 3,100 kg Overall length: 2,610 mm Overall width: 1,240 mm Overall height: 1,890 mm Motor power connection: 1.1 kW Connection per electric heating plate: approx. 6.6 kW Weight approx. 3.1 t Bsdpfex Enp Rex Aftjwi Availability: short notice Location: Röllbach

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. Bodpoych Igjfx Aftswi (We will only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Bedpfx Asvvkfqjftowi Storage location: Nattheim

Condition: used, Year of construction: 2014, functionality: fully functional, On behalf of our client, we offer for sale an OTT edge banding machine with a reversing transport conveyor. Commission sale. Bwedsynb Hyepfx Aftoi

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 80 mm, edge thickness (max.): 15 mm, height adjustment type: electric, overall weight: 7,000 kg, year of last overhaul: 2023, compressed air connection: 6 bar, power of the milling unit: 3,000 W, space requirement length: 10,500 mm, Fully refurbished Topedge Duo-melt, year 2014 2 x 3Kw each Pre-milling motors 80 mm panel thickness 1 x Synchroflex top driven belt system Bwodpfx Afex Nbprotoi 2 x Glue heads and tanks, Duo Melt system (For instant glue colour changes) 1 x rough trim station 1 x Bevel fine trim (can also be used for fine finishing wood in “flat” setting - adjustable angle 1 x Radius trimming machine 1 x AKF station 1 x 4 position per side AZK4 radius scraper 1 x Flat scraper 1 x Cleaning spray, front, middle and back - LCM 1 x Buffing station 2 x free spaces Infeed fence alignment for narrow panels Nesting package LCM iRelease cleaning system BrushTec ES - not included

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, edge thickness (max.): 15 mm, overall weight: 4,000 kg, OTT edge banding machine type Strom+ Optional with return system TransCompakt or TransLift. The machine is factory reconditioned and is sold with warranty in Germany. New tools, new chain plates and belts. For PUR glue and EVA glue. Alternatively, we also have access to a Tornado+ and StrongEdge, both factory reconditioned. Bsdpjyn Am Iefx Aftjwi

Condition: used, Year of construction: 1990, total width: 1,500 mm, total length: 3,150 mm, total height: 2,100 mm, overall weight: 5,000 kg, pressing force: 135 t, opening width: 400 mm, operating pressure: 340 bar, power: 22 kW (29.91 HP), cylinder diameter: 90 mm, transport width: 1,500 mm, space requirement width: 1,500 mm, space requirement length: 3,150 mm, transport height: 2,100 mm, transport length: 3,150 mm, space requirement height: 2,100 mm, pressure: 340 bar, working width: 1,350 mm, empty load weight: 5,000 kg, plate width: 1,350 mm, table width: 1,350 mm, table length: 2,550 mm, No. 04516 Veneer press Ott ST 2513/135 Used, year of construction 1990 Aluminium heating plates with protective foil 2550 x 1350 mm LW Total pressure 135 tons Specific pressure 4.4 - 6.0 kg/cm2 6 hydraulic cylinders with diameter 90 mm Maximum operating pressure 340 bar Heating plates electrically heated 2x emergency stop safety line all around Opening width 400 mm, infinitely adjustable 4 heavy longitudinal beams in the press table ensure enormous stability Pull-out material support on the left front side Button control for close - open - stop Bodpeykt H Rsfx Aftjwi Total electrical connection approx. 22 kW Transport dimensions approx. 3150 x 1500 x 2100 mm LWH Weight approx. 5000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 1977, Used machine Year of manufacture: 1977 Condition: Currently still in production Technical data: Plate size: 2200 x 1100 mm Max. opening: 315 mm Bwedpfoyig Hfsx Aftsi Heating medium: Electric Pressing pressure: 2.7 kg/cm² Cylinders: 4 Including safety cable Dimensions: 2540 x 1220 x 1850 mm Weight: Approx. 2500 kg Location: Hesse Availability: End of March 2026

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point Bwedsymmgiepfx Aftsi

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Bwodpsgmn H Aefx Aftoi

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) Bwodpfxoyh H Aqj Aftoi (Prices subject to variation due to currency fluctuations)

Condition: used, Platters 300cm/125cm Bodpfx Aeyf Enijftowi divisible into 3 pieces 380V Cold press

Condition: used, Year of construction: 1969, Used machine Technical specifications: Plate size: 2200 x 1200 mm Maximum opening: 315 mm Heating medium: Electric Motor connection: 1.1 kW Connected load per plate: approx. 4.5 kW Pressing pressure: 2.7 kg/cm² Cylinders: 4 x 75 mm Bsdsxuxhaepfx Aftewi Dimensions: approx. 2600 x 1350 x 1760 mm Weight: approx. 2600 kg Availability: short notice Location: Röllbach

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Bjdpfx Afoxgpaqotswi Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, Bedpfxohy Tlrj Aftjwi radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Bwsdpslc Ewijfx Aftsi Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: excellent (used), Edge trimming machine Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Bjdpfxowiwnqo Aftswi Including cutter

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood Bedpfx Afefbr S Rjtowi machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, total width: 1,300 mm, total length: 2,600 mm, total height: 2,000 mm, overall weight: 2,800 kg, pressing force: 65 t, opening width: 300 mm, cylinder diameter: 80 mm, transport width: 1,300 mm, space requirement width: 1,300 mm, space requirement length: 2,600 mm, transport height: 2,000 mm, transport length: 2,600 mm, space requirement height: 2,000 mm, empty load weight: 2,800 kg, plate width: 1,100 mm, table width: 1,100 mm, table length: 2,200 mm, No. 04486 Veneer press Ott JU 60 Used Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse Bwedpfsyfw D Asx Aftoi

Condition: used, OTT 300K100 Shelf Press Shelf length: 255 cm Width: 135 cm Clearance between shelves: 350 mm Shelves are in nice gold color but have a single dent of approximately 3 cm diameter Bwodpfxeyh H Uye Aftei Electric heating Piston diameter: 100 mm, 4 pistons Weight approximately 3.2 t Machine in stock, inspection possible

Year of construction: 1968, condition: ready for operation (used), An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible. Bwodoxd Auiopfx Aftji