Used Overload Relay for sale (1,216)

Condition: ready for operation (used), Year of construction: 2019, We have here a Pitney Bowes F700 also known as Relay 7000 envelope inserting system available. Bdedoy R A D Topfx Afgsi This machine is year 2019 and only has done 1.763.359 envelopes. Works without any problem after we have tested it fully. Configuration: 2 main feeders - high capacity feeders 4 docoument feeders - with the extra feeder trays you can switch between documents and folded inserts Folding station Envelope inserting module and station.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). Bjdpeznkx Dsfx Afgsdi A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Pitney Bowes Relay 5000” enveloping machine Item for sale: 1 x Pitney Bowes Relay 5000 Meter readings: Total: Approx. 226,280 pages Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Bdjdpfx Afjz Ixf Nsgei Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Pitney Bowes Relay 7000” enveloping machine Item for sale: Bsdpfx Afoz Iwyrogjdi 1 x Pitney Bowes Relay 7000 Meter readings: Total: approx. 151,436 pages Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For businesses facing the next stage in their growth journey, there is now a unique opportunity to invest in a used AutoStore system with 15,600 bins and a total of 46 Red-Line robots. This comprehensive AutoStore system, integrated by Swisslog, combines high capacity, scalability, and proven performance in a package that rarely becomes available on the market. The system was installed in 2021 and is located in the USA, making it particularly suitable for companies with high order volumes, growth ambitions, or a need to consolidate warehouse flows. System Overview Grid: Double-Double Dimensions: approx. 24.1 x 24.8 m Height: approx. 5.5 m Number of bins: approx. 15,600 Bodpfezc Hbljx Afgedi Bin size: 600 x 400 x 330 mm Robots & Capacity 46 RedLine robots 39 charging stations Ports & Flow 3 Relay Ports 8 Conveyor Ports Costs for dismantling/assembly and integration are additional. We can assist in finding suitable integration partners among the various options available on the market. Contact us for a full specification and any other questions you may have.

Condition: new, functionality: fully functional, Year of construction: 2026, controller model: Estun NC E21, stroke length: 100 mm, throat depth: 180 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table height: 290 mm, overall weight: 1,500 kg, total length: 1,500 mm, total width: 1,300 mm, total height: 1,800 mm, input voltage: 400 V, input current: 380 A, pressing force: 40 t, clearance between the columns: 900 mm, ram plate length: 500 mm, retraction force: 40 t, table length: 1,320 mm, type of input current: three-phase, motor manufacturer: Siemens, Equipment: CE marking, documentation/manual, hydraulics, safety light barrier, The Digima WCY-40T/1320 hydraulic press brake is a compact and robust machine designed for the precise bending of sheet metal and smaller metal components. Its space-saving dimensions make it an excellent choice for metalworking workshops, manufacturing plants and companies producing enclosures, guards, panels, profiles and various technical components. The machine provides a nominal pressing force of 400 kN, equivalent to 40 tonnes, and a working-table length of 1,320 mm. The distance between the columns is 900 mm, the throat depth is 180 mm, the ram stroke is 100 mm, and the maximum open height is 290 mm. The back gauge offers an adjustment range of up to 500 mm, enabling the sheet to be positioned accurately before bending. The Digima WCY-40T/1320 is equipped with an Estun E21 NC control system, which controls the position of the back gauge on the X axis and the working position of the Y axis. The controller includes an operation counter, intelligent positioning, screw-backlash compensation and a function that retains the programmed position after the power supply has been switched off. A positioning resolution of 0.1 mm or 0.01 mm supports accurate and repeatable production. The press brake is powered by a 3 kW Siemens main motor. Its hydraulic system uses Bosch-Rexroth components and a Sunny hydraulic pump, while the electrical system includes Schneider Electric components. PARKER seals and guide rings increase the durability of the working mechanisms and support reliable operation during intensive daily use. The ram approach and return speeds are 80 mm/s, while the working pressing speed is 9 mm/s. These parameters enable efficient machine positioning and smooth bending operations. The rigid monoblock steel frame is welded and heat-treated to provide high structural stability and resistance to deformation under load. The machine is equipped with side guards, a front safety curtain, protection against excessive hydraulic pressure and high oil temperature, motor overload protection, electrical leakage protection and a safety relay. The electrical cabinet has an IP65 protection rating, and the press brake is CE-certified. The standard equipment includes bending tools, two front material-support arms, a foot-control pedal, foundation bolts, spare sealing rings and mechanical and electrical documentation. The upper punch features an 86° working angle and an R0.5 tip radius, while the multi-V lower die allows the operator to select a suitable bending position according to the type and thickness of the material. The Digima WCY-40T/1320 is a practical, user-friendly and economical press brake for companies requiring a reliable machine for the everyday processing of small and medium-sized components. Its combination of a 40-tonne pressing force, a 1,320 mm working length, NC control and high-quality branded components makes it suitable for both one-off projects and small batches of repeatable parts. Bsdpfozlqkusx Afgodi

Condition: new, functionality: fully functional, VACON Danfoss AC Drive NXI01405-A0T0CSS-A1AFA50000+FL23+DLDE 75kW 400V Common DC Bus Inverter Unit Core Drive Specifications NXI: NX Inverter Unit. Operates on a common DC bus system. 0140: 140 Amps Nominal Current Rating.Heavy Duty (High Overload): 105 A continuous output (75 kW / 100 HP motor rating). Continuous/Low Overload: 140 A continuous output (90 kW / 125 HP motor rating). 5: Mains Voltage Class. Rated for 380 V to 500 V AC grid integration (465 V to 800 V DC bus input). A: Includes the Standard Alpha-numeric Control Keypad. 0: IP00 Enclosure Class. This is an open-chassis module designed strictly for mounting inside a clean, protective industrial control cabinet. T: Standard EMC Emission Level adhering to the IEC61800-3 specification for IT networks. 0: No integrated brake chopper unit. C: Physical frame generation / module sizing designated as Frame FR8. S: Standard Air-Cooled system. S: Standard/Uncoated Circuit Boards (unlike your previous 'V' variant, this module relies on the external cabinet enclosure for environmental protection). Internal Expansion Board Configuration (A1AFA50000) The slot mapping outlines the factory-installed I/O and communication boards: Slot A (A1): OPT-A1 Basic I/O Board. Standard logic board providing 6 digital inputs, 1 digital output, 2 analog inputs, and 1 analog output. Bdedpfx Ajy Ud Arofgoi Slot B (AF): OPT-AF Dual Relay Output Board. Adds 2 programmable changeover relay outputs (NO/NC). Slot C (A5): OPT-A5 Encoder Board. A specialized card providing an interface for a digital encoder/pulse generator (typically 5V or 15V), enabling precise closed-loop speed and torque motor control. Slots D & E (0000): Remaining expansion slots are left empty for future modifications. Factory Plus Codes (+FL23+DLDE) These additions dictate specific firmware, testing, or documentation criteria: +FL23: Specifies a customized factory application software loadout or programming setting tailored to a specific automation configuration. +DLDE: German language and documentation pack (typically dictates the physical manuals, labeling, or software default language region). Brand new never used. Please check out our other listings as well.

Condition: new, Core Drive Specifications NXI: NX Inverter Unit. It is designed to be fed by a shared, common DC bus arrangement rather than direct AC mains input. 0072: 72 Amps Nominal Current Rating.Low Overload (Pumps/Fans): Continuous maximum output of 72 A. High Overload (Heavy Duty): Continuous maximum output of 61 A. 5: Mains Voltage Class. Rated for 380 V to 500 V AC grid systems (which corresponds to a DC bus voltage range of 465 V to 800 V DC). A: Includes the Standard Alpha-numeric Control Keypad. 5: IP54 (NEMA 12) Enclosure Class. This offers strong, dust-protected, splash-resistant defense for hash operational environments. T: Standard EMC Emission Level adhering to the IEC61800-3 specification for IT networks. 0: No integrated brake chopper. C: Physical frame generation / module sizing designated as Frame FR7. Bsdpfx Ajy Ud Afefgedi Internal Hardware & Control Boards (SVA1AF00000) The suffix code segment details the exact internal logic, system software, and factory expansion board routing layout: S: Air-cooled design system. V: Internal coating option. It features varnished/coated circuit boards for moisture and corrosive air resilience. A: Standard Vacon System Interface architecture setup. 1AF00000: This sequence identifies the specific hardware configuration across the control expansion slots (A, B, C, D, and E):A1: OPT-A1 Basic I/O Board installed in Slot A. It provides 6 digital inputs, 1 digital output, 2 analog inputs, 1 analog output, +10V reference voltage, and a +24V auxiliary supply. AF: OPT-AF Dual Relay Output Board installed in Slot B. It provides 2 programmable changeover relay outputs (NO/NC configuration). 00000: Slots C, D, and E are left empty from the factory, giving you expansion headroom for fieldbus communications (such as Profinet or EtherCAT) if needed Brand new never used. Please check out our other listings as well.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Bdsdszd A Rdepfx Afgoi Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Table travel distances: approx. 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 305 mm, total height: 2,704 mm, total length: 1,830 mm, total width: 3,029 mm, overall weight: 3,550 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 60 h, coolant supply: 30 bar, spindle motor power: 26,200 W, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Additional features: Lower table BBT30 tool holder CTS 30 BAR Bedpfx As Ahhlzefgsdi 10,000 RPM high-torque spindle 40 tool positions Top cover Manual pulse generator Automatic door Area sensor Hydraulic rotary joint 4P + pneumatic relay box 12P Exio board input 32/output 32 + Profinet slave Spindle overdrive 2 magnetic plates Flaig + integrated control system 400x600 Renishaw T27R (2x) Chip conveyor Cromar 4th axis Kitigawa MR160L + support Corresponding fixtures + bolts (+/-25 pieces) Topsolid 7 post-processor

Condition: new, Hongfa HF187F/24-4HBTF – Industrial Power Relays – 15,000 pcs We are offering a large stock of approximately 15,000 Hongfa HF187F/24-4HBTF industrial power relays. The relays are unused surplus stock, supplied in original Hongfa manufacturer packaging, including protective plastic trays and cardboard boxes. Technical Specifications: * Manufacturer: Hongfa * Model: HF187F/24-4HBTF * Product type: Electromechanical power relay * Coil voltage: 24 V DC Bdedpfj Agxfkex Afgoi * Normally open (NO) contact: Making 10 A, carrying 40 A * Breaking capacity: 10 A at 440 V AC * Normally closed (NC) contact: 1 A at 125 V AC / 30 V DC * Manufacturer part number: 45789110002 * RoHS compliant * Country of manufacture: China Stock & Packaging: * Total available quantity: Approximately 15,000 pieces * Condition: New / unused surplus stock * Original Hongfa packaging * Protective plastic trays * Manufacturer-labelled cartons * Bulk quantities available * Smaller quantities available upon request Suitable for industrial electrical applications, switching systems, control equipment and OEM manufacturing. Location: Botlek Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Worldwide shipping can be arranged upon request. Goods are sold as is, where is, without warranty, claims or returns. Please contact us with your required quantity for a quotation.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,940 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 11,000 W, total height: 2,022 mm, total width: 1,953 mm, overall weight: 3,000 kg, controller manufacturer: FAGOR, controller model: 8055i FL, product length (max.): 4,177 mm, number of axes: 2, Horizontal turning machine manufactured in 2015. This Challenger BNC-1840 (Microturn series) features a robust Fagor CNC control with a manual/power chuck and a disc turret tooling system. It has a machine weight of 3000 kg and is equipped with dual manual electronic handwheels for precise control. If you are looking to get high-quality turning capabilities, consider the Challenger BNC-1840 machine we have for sale. Contact us for further details. - CNC Control: FAGOR 8055i FL (with graphic cycle simulation and Microturn operator interface)- Part Counter: 264- Center Height: 230 mm- Max Turning Length: 1,000 mm- Swing Over Bed: 475 mm- Spindle Speeds: 100 - 4,500 rpm- Spindle Nose Mount: D 1-6 CAMLOCK (direct mount DIN 55029/6)- AC Spindle Motor Power: 7.5 / 11 kW- Drive Power (Total Connected Load): 20 kVA- Nominal Operating Voltage: 400 V- Frequency: 50 Hz- Phase Count: 3 + PE- Full Load Current: 52 A- Max Load Current: 320 A- Short Circuit Protection: 25 kA- Tool Turret: BARUFFALDI TB 160, VDI 40 automatic 8-station tool turret with internal coolant supply (installed in place of standard manual quick-change tool post)- Chuck: SCHUNK ROTA-S-PLUS 250-62/3 (3-jaw wedge bar chuck, Ø 250 mm, 62 mm spindle bore passage) with base jaws and hard reversible top jaws- Tailstock: Manual quill tailstock with clamping lever- Machine Dimensions (L x W x H): 3,030 mm (without chip conveyor) / 4,177 mm (with chip conveyor) x 1,953 mm x 2,022 mm- Optional Equipment: Movable control panel; electronic handwheels (2 manual on apron and 1 portable); heat exchanger; automatic lubrication for headstock, longitudinal, and cross slides; high-pressure coolant system; halogen work lamp; full machine enclosure; Pilz safety relays; Fagor servo drives Bdjdo Ahhc Dopfx Afgei Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Crane control system, controller, safety control system, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, gear limit switch, contact evaluator, frequency evaluator Bdedozmribjpfx Afgoi -Manufacturer: DEMAG, crane control contact evaluator, original packaging -Type: Dematik MKA-2 -Item No.: 46967044 -Cardboard dimensions: 175/115/H60 mm -Weight: 0.3 kg

Condition: good (used), Year of construction: 2005, machine/vehicle number: 1151, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 125 mm, total length: 2,050 mm, total width: 1,440 mm, total height: 3,220 mm, overall weight: 8,000 kg, Single-column (C-frame) eccentric press Gorenje Indop 100 t, manufactured in 2005 and CE-marked, for sale. The press is currently in production use, fully functional, and can be inspected while running. Technical data (as per nameplate): Nominal force: 1,000 kN (100 t) Stroke: 20–125 mm, adjustable Ram adjustment: 80 mm Distance table–ram (ram at BDC): 310–390 mm at 125 mm stroke, 362–442 mm at 20 mm stroke Year of manufacture: 2005 CE marking Serial no.: 1151 Equipment: Adjustable stroke via eccentric bushing Motorized ram adjustment with position indicator Hydraulic unit (overload protection) Movable two-hand control console with emergency stop Flywheel drive Bodpfx Afs Af Nh Regodi T-slot table Separate electrical cabinet Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 8,000 kg Dimensions (L x W x H): 2,050 x 1,440 x 3,220 mm Location: Slovenia Delivery terms: EXW Price: EUR 12,000 net Weight and dimensions are approximate values and must be verified by the buyer before transport.

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Swivel spindle milling machine VEMA TFMS 2-4 in very good condition, like new; the machine comes from a correctional facility and has only been idle for the past few years; it has been used very little and operated by only one person. VEMA is a company from Northern Germany; the machine's design is similar to the KÖLLE F45 or the PANHANS 240. everything functions perfectly all bearings and guides are in good condition year of manufacture 1998 the machine has the control panel on top with a milling stop that can be adjusted on one side or completely in depth; this is possible with a handwheel in each case. For complete adjustment, there is a mechanical counter; the counter can be set to zero at any point by pressing a button, allowing the stop to be adjusted quickly and very precisely. both stop jaws can also be adjusted individually; there are also 2 mechanical counters, which allow for one-sided adjustment and also enable facing operations, for example, on a gluing profile. the milling stop can be rotated on the machine table Bdodpfj Afaugox Afgei the machine has an extra-powerful motor with 7500 watts with pneumatic spindle locking the chips can be removed very well, with 2 extraction ports 120mm with a 30mm spindle that can be adjusted steplessly from -10 to 45°; the spindle is adjusted by handwheel with a mechanical counter. with right/left rotation we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros; this means you have no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. with a large table opening that can be reduced by means of various rings; this means that milling cutters with a very large diameter can also be used, and you can also mill safely with small milling cutters (the rings are included, but they are not visible in the pictures). with 3000, 6000, 4500, 7500 and 9000 rpm the spindle height adjustment is also done by handwheel; here too, there is a very precise mechanical counter for reading the height. the table is made of highly ribbed cast iron with an interchangeable spindle (a 40mm spindle can also be used) very robust and durable design; the machine was built for the most demanding milling operations and is suitable for all milling operations. optimal power transmission through belt drive with instruction manual with 3-roller feed HOLZ HER ETX the feed has right/left rotation; the feed rollers are individually mounted and all are like new; it has 8 speeds the machine table is 1020mm wide and 980mm deep + 500mm wide extensions on the left and right the machine can be used immediately 380V, 7500W Weight: approx. 1000kg with all necessary safety devices; the machine is approved by the Holz-BG (German Wood and Furniture Employers' Accident Insurance Association). the machine weighs approx. 1000kg with motor protection switch against overload professional equipment, not cheap hardware store junk optimal, simple, fast and safe handling

Condition: like new (used), functionality: fully functional, For sale is a package of spare parts from Sick AG. It contains the following 33 spare parts, some of which are new and in their original packaging. 1 SAFETY LIGHT C40S-1504CA010 [1018673] 2 RECEIVER C40E-0601CE010 [1022448] 3 LIGHT GRID PLG3-420F431 1029132 [1029132] 4 Distance sensor 4 ... 20 mA; DT20-P224B [1040405] 5 LUMINESCENCE SENSOR LUT9U-11306 [1046712] 6 LIGHT CURTAIN TRANSMITTER, WSU26/3-103A00 [1047984] 7 LIGHT CURTAIN RECEIVER, WEU26/3-103A00 [1047985] 8 SAFETY SWITCH RE13-SAC [1059503] 9 SAFETY SWITCH RLY3-OSSD400 [1099971] 10 SAFETY SWITCH RLY3-EMSS300 [1099973] 11 LIGHT CURTAIN C4C-SX10530A10000 [1220344] 12 LIGHT CURTAIN C4C-EX10530A10000 [1220357] 13 SENSOR MZ2Q-TSLPSKQ0 [1042228] 14 REFLECTOR FOIL REF-PLUS-R25-K [4051184] 15 INDUCTIVE SAFETY SWITCH IN30-E0407K [6034582] 16 SAFETY COMMAND DEVICE ER12-SB3C4 [6051330] 17 SAFETY LIGHT CURTAIN C4C-EA07510A10000 [C4C-EA07510A10000] 18 SAFETY LIGHT CURTAIN C4C-SA07510A10000 [C4C-SA07510A10000] 19 I/O MODULE UE410-MU3T5 [6026136] 20 Mounting bracket, fastening set for, C4000 [2019659] 21 Cable YF2A15-200UB5XLEAX [2095614] 22 INCREMENTAL ENCODER DFS60E-BAEA00250 [1075627] 23 SAFETY CONTROLLER FX0-GCAN00000 [10440476] 24 RELAY OUTPUT EXTENSION UE410-4R03 [6026143] 25 LASER SCANNER ADVANCED, S30A- S30A-7011CA [1023891] 26 FASTENING SET 2A FOR LMS100 [2039302] 27 SAFETY CONTROLLER [1058999] 28 SYSTEM CONNECTOR 2032856 [2032856] 29 CONNECTORS AND CABLES [1047162] 30 Flexi Soft Drive Monitor FX3-MOC00000 [1062344] 31 INDUCTIVE SENSOR IME12-04BPSZC0K [1040763] 32 C-MOUNT LENS BW 75 MM, APERTURE 1.8-16 [5327527] Bedpfo Af H A Rex Afgsdi 33 FASTENING SET 1A FOR LMS 100 [2034324]

Condition: like new (used), Coil: 24V AC/DC 3.0VA 1.5W 50-60Hz 1) ID No.: 774059826328 Bedpfx Afsyt E Dmegsdi 2) ID No.: 774059825212 Area of application: Safety circuit Width: 22 mm Height: 87 mm Depth: 120 mm Weight: 214 g

Condition: ready for operation (used), Year of construction: 2023, operating hours: 23 h, travel distance X-axis: 410 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 410 MC universal machining centre was manufactured in 2023. It features an electronically controlled infinitely variable main drive with a spindle speed of up to 5,000 rpm and a robust spindle power of 13.0 kW. The machine is equipped with hardened and ground flat guideways and automatic mechanical tool clamping. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 410 MC machine we have for sale. Contact us for further details. - Demonstation Machine -Machine ON Time: 910 h - Spindle Power S1-100% ED: 6.8 kW - Spindle Power S6-25% ED: 13.0 kW - Spindle Speed (Manual Operation): Infinitely variable 1 - max. 4,500 rpm - Spindle Speed (Automatic Operation): Infinitely variable 1 - max. 5,000 rpm - Feed Drives: Electronically controlled infinitely variable servo drive per axis - Rapid Traverse / Feed Rate X-, Y-, Z-axis: Infinitely variable up to max. 5 / 5 / 5 m/min - Operating Voltage: 400 V - Mains Frequency: 50 Hz - Number of Phases: 3- Rated Current: 24 A - Main Fuse: 32 A - Short-Circuit Breaking Capacity: 10 kA - Power Consumption / Connection Power: approx. 17 kVA - Control Voltage: 24 V - Installation Weight (Base Machine): approx. 1,800 kg (incl. fluids, without options/tools) - Max. Transport Weight: 2,030 kg - Machine Construction: FEM-optimized cast construction in cross-slide design - Guideways: Hardened and ground flat guideways in X, Y, Z with metal covers - Drive System: Ball screws in all axes - Spindle Taper Interface: SK 40 DIN ISO 7388-1 Form AD with pull stud DIN ISO 7388-3 Form AD (SKU: 10-113300) - Vertical Milling Head: Swivel range +/- 90°, manually extendable quill with turnstile, 70 mm stroke, clampable, speed-dependent air cooling, milling cutter guard- Tool Clamping: Automatic mechanical tool clamping, clamping force 10,000 N, hydraulic release - Measuring System: Distance-coded linear measuring systems, direct, incremental, resolution 0.001 mm - Overload Protection: Overload detection via drive and control technology - Safety Handwheels: In all 3 axes - Safety Enclosure: Splash and chip guard cabin mounted on chip tray, moving vertically with axis, limit switch secured, 2 sliding doors front, 1 hinged door right, viewing windows all sides - Control Panel: Mounted on long, swiveling arm at base, rotatable - Lubrication: Automatic central lubrication with initial lubricant filling and front-mounted separate waste oil container - Coolant System: Free-standing reservoir, 66 L capacity (SKU: 10-450111-03) - Machine Lamp: LED flexible arm light - Leveling Elements: 1 set = 4 pieces - Fixed Angular Table: Clamping surface 650 x 375 mm, 5 T-slots 14 H7 (pitch 63 mm), max. load capacity 250 kg (SKU: 10-470050-02) - Control Unit: HEIDENHAIN TNC 620 FS with Functional Safety - Screen: 19" vertical touchscreen - Storage Capacity: 30 GB total, 7.7 GB program memory (Compact Flash CFR)- Block Processing Time: 1. Bjdpe Af Rqbjfx Afgedi

Condition: used, Year of construction: 2018, operating hours: 18,682 h, machine/vehicle number: PST43, Used HRS juice line pasteurizer hot-fill - 5000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems Ltd. hot fill juice pasteurizer is designed for continuous thermal treatment within beverage production and industrial packaging operations. It is intended to pasteurize juice before or during hot filling, supporting controlled product heating and thermal process consistency in a used bottling line.Manufacturer: HRS Process Systems Ltd.Machine type: Hot fill juice pasteurizerCapacity: 5000 LPHYear: 2018Process configuration: 1x12-MI120 - 89/16 - 6000 - 316L / 316L SMLSProcess configuration: 1x1-K44(2P) - 168/16 - 1200 - 304 / 316L ERWElectrical supply: 420 V, 50 HzAdvanced Automation & Control SystemsThe pasteurizer is equipped with an ADVANCE TC-20 / TC-20A temperature control interface. The controller supports set-point adjustment, high- and low-temperature alarm limits, differential control, probe calibration, relay restart delay, alarm relay timing and keypad locking. Digital input functions include door-open monitoring and selectable automatic or manual alarm reset logic.Controller functions also include probe-failure relay logic and password-protected programming parameters. A timed restart caution label is fitted, indicating that the unit may switch on after a time delay.Production Line Integration CapabilitiesThis juice pasteurizer can be integrated into a hot-fill beverage production line as a thermal processing stage upstream of filling equipment. In a typical industrial packaging configuration, product is thermally treated before transfer to a suitable hot-fill system, with downstream handling, labeling and secondary packaging arranged according to the final container format.The 5000 LPH capacity makes the equipment relevant for beverage production environments requiring continuous juice pasteurization. Final integration should consider product piping, hygienic connections, buffer capacity, filling-line throughput and thermal process coordination.Machine Condition & Maintenance HistoryThe machine records 18,682 running working hours. It is a 2018 unit with identified HRS Process Systems Ltd. process assemblies and an ADVANCE temperature controller. Inspection of heat-transfer surfaces, seals, pumps, instrumentation, temperature probes, electrical circuits and control parameters is recommended as part of commissioning planning for second hand bottling equipment.Operational Performance & VersatilityDesigned specifically for juice processing, this hot fill pasteurizer supports the controlled heating stage needed in hot-fill beverage production. Thermal treatment equipment of this type is used to help maintain a stable pasteurization process before product transfer to the filling area.The listed construction materials include 316L / 316L SMLS and 304 / 316L ERW configurations, supporting use in hygienic product-processing environments. Temperature control, alarm limits and probe-related functions provide operational tools for monitoring the pasteurization process.Installation Requirements & Site Preparation... Bjdpfxs Adtqlj Afgjdi

Condition: excellent (used), Safety relay for Kardex Megalift FSE vertical storage lifts. This product is no longer manufactured and is not available for purchase as new. Used, but in good working condition. Contact us to check compatibility with your vertical storage system. Delivery time: 1-3 days. Bjdpez N D S Eefx Afgsdi

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC-controlled lathe with driven tools, a parts handling arm, an eye for automatic tool referencing, a chip conveyor, and a material feeder. Commissioned in 11/2014 OSP-P300L CNC control system with a 15" color touchscreen Machine hours: Power-on time: 65,458 hours as of March 18, 2026, NC operating time: 36,054 hours Spindle rotation time: 19,533 hours Cutting time: 16,582 hours Continuously increasing. Power consumption: 33.1 kVA Technical data Max. swing diameter: 480 mm (approx. depending on the current design of the parts handling arm) Max. machining diameter: 340 mm Max. turning length: 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through-bore cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 connection, 80 mm bore, integrated motor Speed range: 45 - 5,000 min.-1 Power/continuous operation: 22 kW/15 kW Continuously controlled C-axis, 360° with 0.001° increment Sub spindle Speed range: 50 – 6,000 min-1 Power/continuous operation: 11 kW/7.5 kW Spindle with 140 mm connection, 62 mm bore, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) Hydraulic through-bore cylinder SS1243, draw tube Sub spindle travel – NC axis W, travel for W450: 595 mm Spring-loaded part ejector from the sub spindle Overload protection for W-axis (drive torque) Tailstock mounting in the sub spindle Turret Number of tool stations: 12, fixed and driven, BMT60 (not VDI) Tool shank diameter: 25 x 25 mm Tool shank outer diameter: 40 mm Driven tools Drive power: 7.1/4.1 kW Speed range: 45 – 6,000 min.-1 Feed rates Rapid traverse in X and Z axes: 25/30 m/min. Rapid traverse in C axis: 200 rpm Travel X-axis: 260 mm Z-axis: 510 mm Y-axis: 115 mm (+70 mm / -45 mm) Machine data Width: 3330 mm – without feeder and conveyor Depth: 1800 mm Height: 2250 mm Machine weight: 5,250 kg Bdjdpfxj Abw U Aj Afgsi Accessories: OSP-P300L Advanced One Touch CF-M-E package including: Coordinate transformation function Profile generation function Advanced One Touch IGF Where N Hwxez Hk R Ue Nou 3D machining process simulation Machining time overrun control Load monitoring (spindle, feed axes) NC operation monitoring (including part count) Cycle time reduction function Hi-Cut Pro function Spindle speed control function High-pressure coolant, max. 20 bar, max. 50 l/min Material feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. FILTERMIST FX4002 extraction system Machine equipment: Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets diameter (mm): 55-60-65 Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub spindle) collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 Tool holders: Axial tool holder - 5X Turning tool holder - 5x Boring bar holder - 2X Front steady rest, double-sided - 3X Rear steady rest - 3X Reduction sleeve (manufactured from stock material) Reduction - nylon, diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 The machine is regularly serviced.

Condition: used, functionality: fully functional, machine/vehicle number: 160135F-01L, For sale: National Instruments PXI-2569 100-Channel SPST Relay Module, in fully functional condition. Manufacturer: National Instruments (NI) Model: PXI-2569 Condition: Used – Fully Tested and Functional Tested with: NI MAX – operational functionality verified Channels: 100-channel SPST relay Max. switching voltage: 100 V DC Max. switching current: 1 A/channel Max. switching power: 60 W/channel Bsdpfx Aezh Ipgefgedi Scanning list: 32,000-step deterministic scanning Interface: PXI Tested with NI MAX software, confirming the functionality of all 100 relay channels. Fully software-programmable with NI-SWITCH driver, compatible with LabVIEW and LabWindows/CVI. Ideal for automated test systems and medium-power switching applications. Removed from a working industrial environment, no faults found. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection. If the phone number is unavailable, please use our email address to contact us.

Condition: new, functionality: fully functional, Technical Specifications • manufacturer: Pilz GmbH & Co. KG • Product Line / Sub-range: PNOZ X / PNOZ X3 • Item / Order Number (ID No.): 774310 (Secondary factory ID: 1058188) • Supply Voltage: 24 V AC / 24 V DC (Supports universal AC/DC lower voltage input) • Power Consumption: 5.0 VA (for AC operations) / 2.5 W (for DC operations) • Frequency: 50–60 Hz • Output Contact Configuration: 3n/o, 1n/c, 1so • 3 N/O: 3 Instantaneous Safety Contacts (Normally Open) • 1 N/C: 1 Auxiliary Feedback Contact (Normally Closed) Bedpfx Afe Agm S Nsgodi • 1 SO: 1 Semiconductor Signal Output (Transistor diagnostic output) • Contact Switching Performance (Utilization Categories): • AC15 (Inductive): 230 V at 5.0 A • DC13 (Inductive): 24 V at 6.0 A • AC1 (Resistive): 240 V at 8.0 A • DC1 (Resistive): 24 V at 8.0 A • Short Circuit Protection: 10 A gG / 6.0 A fast-acting internal fuse backing capability. • Safety & Performance Level Capabilities: Certified up to PL e (Category 4) according to EN ISO 13849-1 and SIL CL 3 according to IEC 62061. • Connection Type: Integrated physical screw terminals. • Country of Origin: Made in France • Regulatory Compliance: CE Mark, TÜV Süd Certified, cULus Listed (IND. CONT. EQ. 4D47), CCC, and EAC. Brand new never used. Please check out our other listings as well.

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Bdodpfxjzrfpxs Afgoi Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Condition: used, Quantity: 2 units available Functionally tested; item originates from the dismantling of equipment belonging to an automotive supplier. Manufacturer: SPS electronic Type: RL42-L Function: High-voltage relay for insulation and dielectric strength testing Bdjdpfjzmm Ixex Afgei Switching voltage: up to 5 kV DC Switching current: up to 10 mA Coil voltage: 24 V DC Application: High-voltage test equipment, safety circuits