Automatic delivery buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
Palamides delta 703 with Heidelberg Stahlfolder Interface Advantages and standard equipment. With the new automatic delta delivery the focus is on higher productivity with lower personnel costs. Sturdy, easy-to-handle stacks ensure effective removal to subsequent processing machines. The delta is primarily a fully automatic delivery system, which streamlines the production process. Here, rationalisation is key, not bundling the packages. By using a delta at a folding machine only one op... more

automatic delivery, mobile PALAMIDES BA 900

Mönchengladbach, GermanyGermany dealership location
6371 km
2004
used
Bbd0owsb0b Navigator Interface small format device air blast device saddle stitcher connection more
4
We are pleased to offer subject prior sale a fully automatic online delivery system incl. automatic in line banderoling for folding machines, saddle-stitchers, etc. Formats: Infeed width x infeed length min. (with small format device) 90mm (3½”)x 65mm (2½") max. 1-up 760mm(30")x 305mm(12") max. 2-up 335mm(13")x 305mm(12") max. 3-up 235mm(9¼")x 305mm(12") max. 4-up max. 5-up Technical data: paper or foil 30mm min. package height (without small package device) 20mm (3/4") max. package heigh... more
1

CASE CLAMP (SEMI-AUTOMATIC) LIGMATECH MPH 410

North Carolina, United StatesUnited States dealership location
518 km
2012
used
Elect./Voltage: 380/480 V, 50/60 Cy, 3 Ph. Bbvssd8smj LIGMATECH MPH 410/25/07 Case Clamp (Semi-Autmatic): (1) Horizontal & (1) vertical interlocked pressure beam, each with electric push button control; 8-beam surface area eliminates need for pressure pads. -- Working capacity:9.8" - 98.4" (250 - 2,500 mm) Length; 9.8" - 27.5" (250 - 700 mm) depth, 12" - 55" (305 - 1,400 mm) height. -- Motorized horizontal & vertical beams can position simultaneously or individually during setup, vertical ... more
9

Automatic Bandsaw Behringer HBP260A

Lemmer, NetherlandsNetherlands
6250 km
1993
excellent (used)
Automatic Bandsaw Behringer Saw capacity: 260 mm round 260 x 260 mm square Saw speed: 17 - 120 m/min. Variomatic Autom. materialfeed: 600 mm Saw blade: 4.100 x 32 x 1,1 mm Featured with: - Hydraulic clamping - Chipconveyor - Cooling unit Bcc7tmjcjg - Additional rollerconveyor - User manuals Country of origin: Germany Motor power: 5 kW Machine weight: 2.200 kg Machine LxWxH: 2.000 x 2.100 x 1.600 mm more
3

Automatic Punching Press Mubea Mubea VP600

Köln, GermanyGermany dealership location
6416 km
1994
used
pressure: t no. of strokes: Hub/min sheet width:1200 x 750 mm weight of the machine ca.: t :80 mm max. material thickness:20 mm min. material thickness:1,5 mm Gvyz7l2x8 Mubea plate punching machine with coordinate table and CNC control. more
6
pressure 25 t sheet width 250 mm throat 210 mm stroke 10-100 mm table-size 560 x 400 mm double strokes/min. 180 Stück table adjustment - upper 190 mm total power requirement 3 kW weight of the machine ca. 2,25 t dimensions of the machine ca. 1,1 x 1,4 x 2,33 m Condition: ready for operation Double-column eccentric press with transverse shaft, wheel guard, 9zsruzhbz electro-pneumatic drive, adjustable stroke and ram, adjustable table. Roller feed: band feed length 0-125 mm, max. Band thickn... more
2
Description: Bccvyez2s2 Used for automatically deburring and honing of industrial knives. Technical Data: Magnetic chuck length 3000 mm, automatic setting of proper angle and honing pressure, knives of any length and of any angle can be honed together in one setup. more
5
saw blade diameter:400 mm cutting diameter:130 mm stroke:150 mm capacity 90 degrees: square:115 mm feeds hydraulic /stepless:0 - 1,5 m/min Bu2mipxl engine output:2,0 / 2,6 kW saw blade turning speeds:10 + 20 U/min total power requirement:12 A dimensions of the machine ca.:1,5 x 1,1 x 1,85 m weight of the machine ca.:1,1 t more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbvssnpyak H. KALLESOE K 12 EL Case Clamp: -- Specifications:Working length 27.5" - 88.5" (700 - 2,250 mm); working height 11.8" - 49.2" (300 - 1,250 mm); working width 25.5" (650 mm). -- Vertical & Horizontal Pressure Beams:Vertical & horizontal pressure beams are adjusted by means of (3) 220 v, 3 phase motors w/automatic locking; includes a total of (5) clamps with (2) pressure cylinders per clamp; each cylinder 4" (100 mm) dia with a 3.5" (90 mm) stro... more


automatic ...
daily

New machines via email!

Stay updated!
5
saw blade diameter 450 mm cutting diameter 10-160 mm stroke mm feed stepless 0-18 mm/sec B2ov33oa total power requirement 7 kW weight of the machine ca. 2 t dimensions of the machine ca. m Cutting lengths can be set from 5 to 1,200mm Sawblade feed, infinitely variable 0 - 18mm/sec Material feed speed 10 - 300mm/sec Accessories / Special Features: - Built-in coolant equipment. - Infinitely variable settings of feeds, hydraulic. - Complete Covering more
3
cutting diameter 230 mm saw band length 2710 mm cutting width 225 x 225 mm dimensions of saw-band 2710 x 0,9 x 25/27 mm mitter cutting 45 ° cutting speed 28 / 56 m/min power capacity 0,85 / 1,2 kW Hrxjh2hd coolant voltage 400 V total power requirement 1,3 kW weight of the machine ca. 475 kg more
3
bore diameter 26 mm swing diameter 140 mm DIN 52022 Gr. 4 spindle diameter in front bearing 55 mm work height max. 1050 mm turning speed range 205 - 3280 U/min rapid speed 2 m/min feed speeds infinitely variable 0 - 1200 mm/min number of slides 3 Uqvqibp7u total power requirement 3,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,80 x 1,00 x 1,60 m stepped drive, with autom. electro-magnetic speed control for drive with 3 slides, with electrohydr. control acc.: variou... more
4
Description: Suitable to grind automatically planer knives, chipper knives, veneer knives, paper knives and machine knives. Specifications: Bccuiyo7b3 Magnetic chuck length 3000 mm, magnetic chuck width 155 mm, grinding height approx. 120 mm, grinding width 225 mm, grinding spindle speed 1500 rpm, grinding motor 11 kW, grinding wagon speed stepless adjustable 0,02 - 30 m/min., grinding ring diameter 250 mm, connected load approx. 20 kW (400 volts / 50 Hz), weight approx. 3000 kg, dimensio... more
4
turning diameter over bed: mm spindle passage: 60 mm turning length: 45 mm tool turret - number of stations: 8 Number of tools: 6 St. turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m S8zdzgnvb cam-controlled automatic lathe - 2 x rotary slide - 2 x cutting-off carriage - cooling system... more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Gl0mqc2tq This includes the CORDES STAIR-ROUTER MODEL "40" Automatic CNC Stair Stringer Router and CORDES WEDGIT MODEL 30 Automatic CNC Stair Wedge Cutter. - Both are sold together for one [...] STAIR-ROUT "40" Fully Automatic 3-1/2 Axis CNC Stair Stringer Router for trenching open and box stairs. Unit automatically cuts rise, run, and advances to the next board. This model was developed over (4) Generations of improvements. Basic Operation: -- Operator... more
4

Automatic Dowel Rounder - 2001 CE Intorex HA40

1 Moor Ln, Liverpool L10 0AS, UKUnited Kingdom
5686 km
2001
good (used)
Intorex HA40 Automatic Dowel Rounder - 2001 CE Minimum workpiece length 300mm Maximum diamter for rounding 46mm Minimum diamter for rounding 10mm Feed speed 10 - 30m/min B0q3o79m 7.5hp main motor Head is fixed diameter. Must be changed for each different diameter Year - 2001 CE Compliant Condition - Good more
4

Hacksaw - Automatic BEHRINGER Super A-200

Dreieich, GermanyGermany dealership location
6568 km
1982
used
cutting diameter 200 mm band length 350 mm cutting lenght max. 600 mm cutting range max. 180 x 180 mm dimensions of saw-blade 350 x 35 x 2 mm no. of strokes 52/66/81/104/132/162 Hub/min coolant voltage 380 V Dkdve9sp8 total power requirement 3,0 kW weight of the machine ca. 470 kg more
2
workpiece dia. Ø 24 mm workpiece feed -automatic 75 mm thread dia. 30 mm Srnyhk turning speed range - spindle 27 - 3750 U/min tool turret 8 Plätze max. travel of the tool turret 70 mm total power requirement 5,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,10 x 0,85 x 1,50 m with 2 cross and 2 parting-off slides, with thread chaser device and multi edge turning device acc.: bar loading magazine IEMCA AS 325/32, various change gears more
8
Professional packing machine of a renowned manufacturer of tape width approximately up to 50 mm, or optionally up to 70 mm. maximum dimensions: width 650 mm x height 650 mm, length unlimited. CA minimum dimensions: width 130 mm x height 120 mm x length 160 mm. Bcckbrd2xs -No settings for different carton formats required. -Two-sided lock top and bottom. Transport drive side. Pressure for automatic width and height adjustment continuously adjustable. Working height of adjustable m... more
6
pressure: 30 t F3wx3mz ram surface area: 450x250 mm ram adjustment: max. 50 (manual) mm dayligth: 400 mm Table surface area useable: B:350xH:330 mm strokes per minute: 200 - 1200 adjustment of stroke: keine / no stroke adj. mm stroke: ca./approx. 20 mm mm total power requirement: 7,5 kW weight of the machine ca.: 3,6 t transport dimensions LxWxH: 2,3x1,6x2,7 m automatic punching press-4 column mechanic transportation dimensions incl. electric cabinet [...] more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glvrq9odi US CONCEPT CHB-12 Hauncher/Notcher;The US CONCEPTS CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end. -- Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with & Spec's: -- 40 MM horizontal spindle that moves up hydraulically past the table with the clampe... more
6
Serial No. 6428-106-04 Capacity Rounds 400mm, Squares 400mm x 400mm Input 415/3/50 ac 4 kW Speeds 20-110 Metres per Minute Vice opens 420mm Iwfllhv Twin vices Yes Stroke of feed vice 600mm Multi Feed Yes Control Kasto Fitted with Swarf Conveyer and Coolant Length 9' / 2.74m Width 7'2" / 2.18m Height 6'8" / 2.03m Nett weight approx. 2.1/2 ton / 2540 kgs more
4
cutting diameter 250 mm saw band length 3010 mm cutting width 330 mm dimensions of saw-band 3010 x 27 x 09 mm cutting speed 35 / 75 m/min mitter cutting 45 ° power capacity 1,5 kW coolant voltage 400 V total power requirement 2,2 kW weight of the machine ca. 700 kg dimensions of the machine ca. 2,60 x 1,75 x 1,70 m 3gtisvayf - Fab. No.: 0003000633 more
1
turning diameter ca. 100 mm turning length 100 mm number of slides 2 spindle hollow 42 mm face slide travel 55 mm turning speed range max. 5000 U/min Uqvp8qkjt greates pass round over bed 240 mm feed speeds 20 - 400 mm/min rapid speed 6 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t range L-W-H 2,80 x 1,20 x 2,00 m with connector field control more
5

delivery unit GUK

Germering b. München, GermanyGermany dealership location
6837 km
used
offer consists of: 3r9xeccdc GUK delivery unit more
6
pressure: 30 t stroke: ca./approx. 20 mm strokes per minute: 200 - 1200 H/min S8wtki8ut Table surface area useable: B:350xH:330 mm ram adjustment: max. 50 (manual) mm ram surface area: 450x250 mm adjustment of stroke: keine / no stroke adj. mm dayligth: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 3,6 t transport dimensions LxWxH: 2,3x1,6x2,7 m automatic punching press-4 column mechanic transportation dimensions incl. electric cabinet [...] more
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. Bbuzidcw9l UNIQUE 313 Automatic Cope and Dowel Door [...] the end and drills for dowels of (2) cabinet door rails on each pass, automatic cycle for accurate & easy alignment of mitered [...] with: -- (2) 5 HP Dual-motor set for shaping w/1-1/4" spindles; (2) 1/3 HP dowel alignment drills. -- Automatic cycle with dowel hole boring for accurate alignment of mitered door corners in (15) Seconds per cycle, -- 1" Material thickness capacity, 4" max. material ... more
2
Serial No. 44650090 Capacity Rounds 420 mm, squares 400 mm x 400 mm Input 415/3/50 5.5 kw Speeds 15 - 90 m/mim Vice opens 420 mm Twin vices yes Stroke of feed vice 500 mm Multi Feed yes Jux9du Fitted with swarf scres and coolant Length 8' 8" Width 7' 6" Height 5' 4" more
6
2 columns execution Cutting diameter max 360mm L2ysr Cutting length max. 3x600mm Blade length 5334mm MARCELS MASCHINEN CH more
4

Automatic Flaskless Moulding Plant Sinto HWS FBO IV

Iserlohn, GermanyGermany dealership location
6437 km
2007
good (used)
Technical data: - Flask size:700x600x180-250/180-250 mm - Moulding speed of the machine: 60-70 mould/h - No of moulds in the pouring line: 14 - No of moulds in the cooling line: 29 Moulding Line Dimensions: - Total length of moulding line: 60 m - Total width of moulding line: 3.5 m - Length of pouring line: 11.5 m - Length of cooling line: 24 m - Width of cooling line: 2.3 m - Dimensions of Moulding machine: 6 x 8 m kW Power: - Moulding line: 73kW - Moulding machine: 43kW... more
6

criss cross delivery Horizon CCR

Germering b. München, GermanyGermany dealership location
6837 km
used
offer consist of: - Horizon CCR Bb8veol32j CCR= criss cross delivery unit suitable for: Horizon HAC-15a / HAC-15b Horizon AC-8000 / AC-8000s Horizon TAC-8a / TAC-8b Horizon AC-1200a / AC-1200b Horizon MC-8a / MC-8c Horizon MAC-8a / MAC-8c Horizon MC-80a / MC-80c Horizon VAC-100a / VAC-100c Horizon VAC-60a / VAC-60c Horizon VAC-1000a / VAC-1000c Horizon VAC-600a / VAC-600c weight: 49kg more
3
Balestrini PICO CN Automatic Round End Tenoner - 2013 CE For square end or round end tenons. Special configuration. - Single table working. Bcb8mdssmn - Foot pedal operation of working cycle. - Max tenon length 520mm (max workpiece width 560mm - giving 20mm shoulder each end) - straight horizontal tenons only. - Max tenon shoulder length 50mm. - Facility to still machine standard dimension tenons. - Special overhead pneumatic workpiece clamping configuration. - Extended support table ... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ksjzyi3f UNIQUE 313 Automatic Shaper for Miter DoorsMiters the end of (2) cabinet door rails on each pass, automatic cycle controlled by maintenance-free PLC software for accurate & easy alignment of mitered corners; (2) 5 HP dual-motors for shaping w/1-1/4" spindles. -- Features: (2) Pneumatic clamps hold workpiece on either side while parts are being shaped, unlimited part length. -- 1" Max. part thickness, 4" max. part width. - Staggered tables allow ... more
5
Serial No. 172 Capacity 600mm Diameter or 600mm x 600mm Square Input 415/3/50 ac 7.5 kW approx Speeds Variable Vice opens Hydraulically Iytm8apt3 Twin vices Yes Dimensions Footprint 3500mm x 3300mm more
6
STEIMEL oil separator, to separate in automatic run chips from oil or coolant. Including: 2qn8my - dosing unit - parts separation (separation from chips, remnants and parts) - band conveyor The plant is dismantled and stored. Schematic diagram, electric diagram, etc. are in plan. STEIMEL will produce this plant today nearly unchanged. The plant was maintained annually from STEIMEL (maintenance contract). composed of: 1. stokerTyp VK load capacity150 kg, width 900 mm, ejection heig... more
5
cutting diameter: 270 mm saw band length: 4300 mm band width: 1 mm total power requirement: 1.8 kW weight of the machine ca.: 2.8 t Yuwfcu8n space requirements of the machine approx.: 2.4x2.2x1.8 m complete equipment with tilting table 2x45° Baujahr: 1978 can be used as mitre saw. automatic material feeder can be demonstrated [...] more
3

Stream delivery MBO SA 76

Minden, GermanyGermany dealership location
6479 km
good (used)
working width: 760 mm J0xvl8lg7 more
5

Gross baler 88 to HSM HSMVK8515

Wiefelstede, GermanyGermany dealership location
6385 km
2001
used
Big baler, channel baling presses Ddjomkv Main drive power 90 kW + 30 KW Pressing force 88 t-vollautomatische injection -vollautomatische wire strapping -Ballen-/ channel cross-section B x H 1100 x 750 mm Bale length of 4-stage adjustable 600 - 1,200 mm Bale weight with 1200 mm length approximately 500-800 kg Cycle time approx. 9.8 sec Throughput depending on the density 5.50 to 16,50 t / h Types of materials PE foil -PET bottles Paperboard Textiles more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbuzimt3tm UNIQUE 311-40 Automatic Shaper (Cope) Copes multiple workpieces up to 6" wide x 40" long (40" long capacity option) in only (1) pass, quickly and accurately. Equipped with: -- (2) 5 HP motors with magnetic starter; (2) 1-1/4" dia. counter-rotating cutterheads eliminate tear-out on detail edge of cope/tenon cuts. -- Ability to stack (2) cutters with air cylinder positioning of the cutters against a dead stop for accuracy. -- Pneumatic safety... more
1
Serial No. 160 Capacity 520mm Diameter or 520mm x 520mm Square Input 415/3/50 ac 5.5 kW Speeds 65'-426' / 20 Metres-130 Metres Per Minute Vice opens Hydraulically Bccqdiaet3 Twin vices Yes Stroke of feed vice 500mm Fitted with Coolant Length 3400mm Width 2200mm Height 2350mm Nett weight approx. 3 ton 15 cwts / 3810 kgs more
4
turning diameter over bed 125 mm spindle passage 10 mm turning length 100 mm F7jrsj2 turning speed range 1000 - 10000 U/min Boring depth max. 70 mm speed control shaft 0,20 - 284 U/min total power requirement 5,00 kW weight of the machine ca. 2,50 t dimensions of the machine ca. 6,00 x 1,50 x H2,00 m Bar feeder IEMCA CS112/42/CT more
6
spindle passage 32 mm turning length 320 mm Control Mitsubishi weight of the machine ca. 3,05 t Mmnpbk9f CNC lathe Citizen Cincom M232-III MCL 2032/1889 7-axis simultaneous control Machine incl. Bar magazine LNS Express332, full synchronous spindle between main and pick-off spindle C axis on the main spindle Accessories for machine: 6 tool holders right, height adjustable +/- 1,0 mm, Shaft 16 x 16 mm, for right or left tools 2 drill heads horizontally, n = up to 5'000 rpm, Collet holder E... more
3
Data on the machine 2 folding plates Single sheet feeder Size 350 x 450 mm   Bbmbd2lphm more
5

Gross baler 88 to Welger ZF-3000 SB-3000

Wiefelstede, GermanyGermany dealership location
6385 km
2004
used
Big baler, channel baling presses Machine comprising - feeder type: ZF 3000 Channel baling press type: SB 3000 Main drive power 13.95 of kW force 31 t-vollautomatische injection -vollautomatische wire strapping -Ballen-/ channel cross-section B x H 800 x 700 mm Bale length adjustable 800-1500 mm Bplrsym7 Bale length mm weight approx. kg Cycle time approx. 11.5 sec Throughput depending on the density max 3000 kg / h -Type of material: PE foil, PET bottles, cardboard, textiles Machin... more
1
Elect./Voltage: 208/480 V, 60 Cy, 3 Ph Gvky2o UNIQUE 2700 CNC CNC Door ShaperCNC controlled maching center for Raised Panel [...] with: -- (1) CNC controlled 5" stackable vertical spindle (max. 4 tools per stack), 7.5 HP belt driven; max. clamping thickness 2-1/2" and 6" max. cutter head diameter. -- "X" Axis of spindle travels 81" on (2) THK rails with ball screw movement, "Y" axis with 5" travel on THK rails with 5" max. workpiece overhang, "Z" axis with 5" max. travel on THK [...]: -- ... more
6
Serial No. 2206 Capacity 520 mm diameter or 520 mm square Twin Pillar yes Input 415/3/50 7.5 kw approx Speeds variable Vice opens 525 mm Twin vices yes Stroke of feed vice 450 mm Fitted with coolant and swarf conveyor Bccqc8o892 Length 4.20 m Width 2.40 m Height 2.50 m more
5

Band Saw - Automatic KASTO - AUTOMAT HBA 520 AU

Karlsbad, GermanyGermany dealership location
6611 km
1998
used
weight of the machine ca.:4200 kg sawing motor:7,5 kW total power requirement:10,0 kW dimensions of the machine ca.:3,34 x 2,42 x 2,35 m cutting speed:17- 120 stufenlos m/min cutting diameter:420 x 420 mm saw band length:6300 x 41 x 1,3 mm feed length:einfach 600 mm Gxr93r2 more
6
cutting diameter 260 mm saw band length 2660 mm cutting width 400 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 160 x 260 mm capacity 45 degrees: square 160 x 160 mm capacity 90 degrees: round 260 mm capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm material feed length 500 mm saw band feed 17-120 U/min dimensions of saw-band 2660 x 25 x 0,9 mm drive saw-band 1,5 kW D8yb9qmp3 drive hydraulic 0,25 kW total power requirement 1,75 kW weight of the mac... more


automatic ...
daily

New machines via email!

Stay updated!

to

to

Edit search
AUTOMATIC DELIVERY
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close