Used Paint Mist Extraction for sale (7,634)

Year of construction: 1996, condition: used, Rollable chip extraction for aluminum or PVC Crodpfxjy Tanhs Alwsc

Year of construction: 2018, condition: used, The year of manufacture refers to the final acceptance of the system; individual components may differ in age. Workpiece dimensions up to a maximum of L x W x H: 8,000 x 2,000 x 2,000 mm, maximum crossbeam load: 2,000 kg/carriage, material: steel. Pos. 1: Washing booth, Jumbo-Clean with stainless steel interior for degreasing/phosphatizing of steel, either automated or with manual spray lance. Pos. 2: 1 set of belt filters. Pos. 3: 1 automatic spray ring for the Jumbo-Clean washing booth, including a central lance. Pos. 4: 1 fresh water treatment system. Pos. 5: 1 manual conveyor with 1 electric cross-travel carriage. Pos. 6: 1 lifting/lowering station, Jumbo-Lift 2000, integrated into the cross-travel carriage. Pos. 7: 1 indirect gas-heated flash-off oven/powder drying oven/wet coating drying oven, door opening W x H: 2,800 x 3,100 mm, clear length: 9,500 mm, overall W/H/L approx.: 4,000/5,000/10,000 mm. Pos. 8: 1 end-face powder coating extraction system for an on-site painting booth for spraying and drying operations. Pos. 9: 1 manual coating unit, OptiFlex(R)2. Pos. 10: 1 structure for on-site steel construction. Pos. 11: Control cabinet. Crjdsy T Nzdjpfx Alwsc

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, suction capacity: 1,200 m³/h, total height: 2,970 mm, total length: 930 mm, total width: 930 mm, overall weight: 250 kg, LTA (JUNKER Group) mechanical dust filtration systems capture and remove dust and fumes in industrial applications. They use cartridge or bag filters to reliably capture even the finest particles. Thanks to automatic filter cleaning, they offer consistently high separation efficiency and are available as mobile or stationary systems. Cedpjv S E Ncefx Alwjrc

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, power: 8.2 kW (11.15 HP), suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, For sale: Felder RL 300 industrial dust extraction system in very good condition. The machine was delivered new in 2022 and has always been located in a well-maintained interior design workshop. The system functions perfectly and can be used immediately in a furniture workshop, carpentry shop, or interior design workshop. Specifications: Brand: Felder Type: RL 300 Year of manufacture: 2022 Condition: fully functional Design: industrial dust extraction system with filter system Mobile on wheels The machine is sold without extraction ducts and pipes. Only the base unit as shown in the photo. Suitable for connecting to multiple woodworking machines such as: CNC machine panel saw edge banding machine planers milling machines The machine can be viewed in Rijnsburg – by appointment only. Transport is the responsibility of and arranged by the buyer. Available from mid-July. Cedjzap Ezepfx Alwjrc Asking price: €10,250 excluding VAT

Condition: used, Year of construction: 2014, total width: 2,500 mm, total length: 5,000 mm, total height: 2,500 mm, Empty weight: 2.500 kg Filter-area: 228m2 Capacity: 15.000 m3/h - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 22653 - Control type: Herding MP 12 - Motor power: 55.0kW - Transport dimensions: 5000mm x 2500mm x 2500mm (l x w x h) Cjdpfx Aljwrr Htowsrc - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Assortment of paint shop accessories from a business closure Liquidation of an automotive paint shop with various painting and workshop accessories. Visible items include, among others: Painting stands Bodywork stands Bumper holders Paint racks Color cartridges Paint materials Workshop carts Hydraulic lifts Small parts and accessories Various brackets Credpsy Tyykjfx Alwoc Painting aids The paint booth/painting system is not included in this offer. Condition: Used Prices and items available upon request.

Condition: excellent (used), Year of construction: 2022, For sale: Romer powder coating line. Equipment manufactured in 2022, lightly used. It was used for coating armored doors. The powder coating line consists of: 1. Oven (doors on both sides, 5 coating tracks) Model: Romer SW Csdpfxoyzw Hws Alwerc Internal dimensions: 3000 x 1500 x 2200 mm The oven does not have a heating burner, it was previously used with a gas burner. A gas or electric burner can be installed if required. 2. Romer powder coating booth extraction wall Model: Romer KPO-3ZN 3. Conveyor system Overall dimensions: length 5900 mm x width 14000 mm, 2 trolleys with 5 tracks each. 4. Crossbeams with wheels (20 pcs.) Currently, the line is dismantled and ready for transport.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade faire machine *available upon request New: With the frequency converter option, up to a maximum of 45% eligible for state funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *both individual machines manufactured and in stock, only need to be connected to each other 1. Technical Data Briquetting Press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput rate (depending on material): up to 60 kg/h* *depending on bulk density Cjdpfxod Su Hxs Alwerc *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Footprint total system: 2.2x1.1x2.8 m LxWxH Height - 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Press tongs cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant 2. Technical Data Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle left (when standing in front of the dust bin) Residual dust:

Year of construction: 2022, condition: new, Highlights of our two extraction systems Eco 3000 and Eco 5000 +Solid sheet metal construction ensures ideal flow conditions Cjdpfx Alsidma Noworc +resistant wind impeller +constant extraction performance even under constant stress + Connection of up to a maximum of 3/4 machines possible using the supplied distributors +high suction power due to large filter surface (filter dimensions: ø500x1100mm) +Integrated driving device for easy manoeuvring Scope of delivery: Running gear, filter and chip bag, distributor (connection for 3/4xø100mm suction pipes), incl ---- Device available in two designs: *in the following marked with position 1) and 2) 1) Extraction system Eco 3000 - 1.5 kW * with a chip bag and an industrial polyester filter Motor power S1 in W 1500 Installation dimensions in mm 985x560x2250 Extraction capacity in m³/h: 3,000 Suction outlets 3x (ø100mm) Negative pressure in Pa: 2200 2) Extraction system Eco 5000 - 2.2 kW * with two chip bags and two industrial polyester filters Motor power S1 in W 2200 Installation dimensions in mm 1540x560x2270 Extraction capacity in m³/h: 5,000 Suction outlets 4x (ø100mm) Negative pressure in Pa: 2600 --- Information applies to both devices: Sound pressure level in dB(A) < 85 dB Voltage: 400V / 50Hz *Option: also available in 230 V Chip bag diameter in mm: 500 Chip bag length in mm: 850 Delivered in a box for self-assembly in a few steps The filters must be cleaned manually at regular intervals. Surcharge for suction with automatic cleaning + €4,700 net

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Crsder R Ewlopfx Alwjc Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Cjdpfx Aoy Tiaaelworc Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: used, - Chip container: included Credpjzav Uisfx Alwoc

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter Cjdpfx Aley R S E Howsrc -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Quantity: 1 piece available -Price: per piece -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3 Crjdpfowu Ackox Alwsc

Condition: like new (used), functionality: fully functional, machine/vehicle number: 25C862, SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: 25C862-OC - UPC Code: 00755652654278 - General industry - sealants, adhesives, silicones - Application: Beading and encapsulation Crsdpfx Aoza Utqolwsc - Maximum flow rate: 9 L/min - Maximum working pressure: 207 bar - Air inlet: 1/2" - Mixing ratio 1:1 - Pressure ratio 36:1 - For 20 L drums - Second-hand product, fully inspected

Year of construction: 2016, condition: excellent (used), Painting booth Diana serie with horizontal ventilation Modern technology: Dust free operation paint overspray collection system Stable spraying temprature Control box with safety function Length:16000mm Width:6000mm Crjdpfx Aoygum Rolwec Height:6000mm

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Length:16000mm Width:6000mm Height:6000mm Credpfxoygu Smo Alwjc

Condition: good (used), Used, hardly utilized Nederman exhaust extraction system for trucks and cars. Shipping not possible. Please do not send email inquiries! If you have any questions, we are happy to assist you by phone. Cjdpjzapy Esfx Alwjrc Viewing and pickup only by prior telephone appointment. Subject to changes, prior sale, and errors.

Condition: used, Year of construction: 2002, total height: 2,900 mm, total length: 4,300 mm, total width: 1,500 mm, Colour: Grey - Year: 2002 - Documentation available: No Crsdpfx Alow Hcd Sswsc - CE certificate present: No - Capacity [m³/h]: 5500 - Number of filter bags [pcs]: 48 - Filter length [mm]: 2000 - Filter diameter [mm]: 230 - Filter surface area [m²]: 73 - Connection diameter [mm]: 310 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Main fan power [kW]: 4.0 - Extinguishing system: Yes - Disassembled: Yes - Control cabinet present: Yes - Collection bags: Yes - Number of bins/bags [pcs]: 3 - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 4.0 - Transport dimensions: 4300mm x 1500mm x 2900mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, functionality: fully functional, filter area: 69.2 m², overall weight: 1,336 kg, year of last overhaul: 2025, Equipment: CE marking, We are offering this used AL-KO EJ DUO 6 ZRS OV stationary dust extraction system, manufactured in 2017. Type: EJ DUO 6 ZRS OV Type number: P170701 Manufacturer's number: 2433376133 Year of manufacture: 2017 Filter area: 69.2 m² Weight: 1336 kg Air filter design: Category M, elect., 1.44 m Item number: 85100401 Filter hoses were replaced in November 2024. Compressed air cleaning with integrated compressed air tank – time-controlled. Includes all pipelines and valves (including 1 pneumatically controlled valve). The filter station has 6 connections for exhaust air intake. Crsdpfx Alszbp Rmowoc Includes 6 fans. Chip removal: after the filter station, there is a Vexat-compliant rotary valve airlock, a ring line with a fan, and a separation box, below which there is another Vexat-compliant rotary valve airlock. Currently, in winter, the chips are conveyed via a screw conveyor into the silo; in summer, they are filled into big bags. The system can currently be inspected while in active operation until the end of July. Collection by self-dismantling is possible from August 1st to no later than the week of August 3rd. Only B2B sales, excluding any warranty. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2007, condition: used, Extraction system for chips, granules, and dust. Cjdpfsza Ha Aox Alwsrc

Condition: used, Length 3.500 mm Depth 1.000 mm Csdpfx Aljw I Sykjwjrc Height 2.000 mm ca. 700 kg Sturdy Lübbers paint drying trolley with adjustable center rake. Available: 15 units Price per unit: € 490.00 + VAT.

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Csdpfxod Nwk Uj Alwsrc Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Application Areas: CNC Machines Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Working Principle; 1-Entry of dirty smoke –vapor- mist 2- Condensation with laminar flow over the walls 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid 5-Dry and clean air evacuation For detailed information please contact us. mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

Condition: good (used), Year of construction: 2012, functionality: fully functional, volume flow: 18,000 m³/h, filter area: 120 m², Filter hose length 2000 mm Mechanical/pneumatic shaking Base assembly with agitator and screw discharge Gear motor 2.2 kW Connection for briquette press Cedpfxjwhlkws Alworc with air recirculation

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 11 kW (14.96 HP), volume flow: 8,000 m³/h, nominal flow rate: 6,950 m³/h, negative pressure: 2,630 Pa, H 3 "GS dust-tested" Extraction connection 350 mm Ø Cedpfowty Uzex Alworc Pneumatic JET filter cleaning Extinguishing system with powder extinguisher With rotary air lock