Used Paint Removal for sale (7,130)

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. Hedpevv Rfksfx Abrefc The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Hodpfsvv H Hdox Abrsfc Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 250 mm, pass-through width: 250 mm, overall weight: 650 kg, The Ceetec A250 is a medium-sized unit from the series of coating machines and is therefore ideally suited for use in industrial and production facilities, such as paint shops, joineries, sawmills or building supply stores offering facade boards, decking, soffits, structural timber, etc. The device is most commonly used in manual mode, which means that the workpieces are loaded and unloaded by hand. Wooden components are conveyed horizontally through the machine by an automatic feed system. The Ceetec A250 ensures high-quality finishing thanks to its eight rotating brushes, each of which can be individually adjusted. Excess paint recirculates in a closed-loop system through a filter and back into the tank. The closed-loop circuit ensures optimal paint usage. The unit is supplied complete with brushes and a bag filter, making it ready for operation after connecting to a power source. The Ceetec A250 is a standard model, which means it is typically in stock and can usually be delivered at short notice. Brush coaters of the A-series are easy to keep clean. Consumable parts that naturally wear out are stocked in our warehouses, ensuring availability and fast delivery times. Thanks to the modular design of the machines, the operator can handle the replacement of most parts independently. The machine can be additionally equipped with a variety of brushes, bag filters with different mesh sizes, roller tables, and paint trolleys, among others. For processing raw wood, it is recommended to install a cleaning unit to remove dust and shavings before the machine. The device is intended for use with water-based products. Hfedpfxoxhc Tme Abrsc ADVANTAGES OF CEETEC A250: Independent adjustment of brush heads Application system using low-pressure nozzles and distributing brushes on all four sides of the workpiece Closed-circuit operation enabling recovery and reuse of excess preservatives Adjustable feed speed Can be equipped with a unit for handling short elements (from 800mm) Option to fit a 2m roller table at the machine infeed and outfeed Basic working parameters: Speed: from 18 m/min to 42 m/min Workpiece dimensions: Max. H: 250 mm x W: 250 mm. L: Min. 2000 mm. (other sizes available!) Power supply: 3 x 380 V + PE IP. Class 54 Machine dimensions: 2450 mm x 1200 mm x 2000 mm (height) Net weight: approx. 600 kg

Condition: new, Year of construction: 2024, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Hedpfxsflpi No Abrofc Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: good (used), 839 USED Spiral mixer + 2 removable aluminum bowls with a capacity of approx. 120 kg of dough. EXTERNAL DIMENSIONS (in cm.): - L: 134, - W: 95, - H: 132, BOWL DIMENSIONS (in cm.): Hfodpfx Absualh Asrec - H: 553, - top W: 90, - bottom W: 67. TECHNICAL DATA: - capacity: 120 kg of dough - 2 speeds - reverse gear, - timers for 1st and 2nd gear The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ Hfjdpfx Abjfz I Rxorjc 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: good (used), Conveyor belt for removing waste from the three-knife trimmer Cologic VCZ-BAAN Made in Netherlands Working width: 40 cm. Hodpsx Nct Sofx Abrefc Offcuts are discharged directly from under the machine into a container.

Condition: good (used), Year of construction: 1985, total height: 2,000 mm, overall weight: 150 kg, total length: 1,300 mm, total width: 1,000 mm, inner dimension height: 950 mm, inner dimension width: 900 mm, inner dimension length: 1,100 mm, Paint spray booth for small parts / color samples, exhaust air volume 3100 m3/h, motor 0.75 KWDimensions 1000x1300x2000 mm, approx. 150 kg Hsdpevl H Sfefx Abrjfc

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, suction capacity: 4,100 m³/h, input voltage: 230 V, power: 1.1 kW (1.50 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, dimensions without fan and control panel! Work area - dimensions (mm): 990(w)x800(d)x1100(h) Overall dimension(mm): 1100(w)x1900h)x1100(h) Hfodpfx Ajia Tabobrec Technical data: - Fan power 1.1kW (ATEX) - Fan suction capacity: 4100 m³/h (max 750Pa) - Lighting: 1pc 2x18W (ATEX) - Connection voltage: 230V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: used, Truck dimensions (pallets): Hfedpsx Tuu Nefx Abrec From 1 to 4) 140x110 h.120 Kg. 600 5) 140x130 h.40 Kg. 100 6) 150x100 h.90 Kg. 300 7) 320x100 h.120 Kg. 800 8) 320x90 h.80 Kg. 300 Inventory of parts: No. 69 pieces of 3 meters (total 207 meters) No. 1 piece of 2.80 meters No. 13 pieces of 3 meters (total 39 meters) No. 6 pieces of 1.80 meters (total 16.8 meters) nr. 2 pieces of 2.40 meters (total 4.8 meters) No. 1 piece of 1.50 meters nr. 2 pieces of 0.70 meters (total 1.4 meters) nr. 2 pieces of 1 meter (total 2 meters) No. 1 piece of 1.50 meters No. 17 curves of 1.20 linear meters (total 20.4 linear meters) with a pitch (diameter) of 1.15 meters No. 6 curves of 0.3 meters (total 1.8 meters) No. 1 trailer with 1.50 meter track

Condition: new, Year of construction: 2026, Wetpaint Spray-/ Dryingcabine Internal dim. L8000 x B4000 x H3000mm 30.000m³/h Inletair/ 30.000m³/h evaporation Internal Temp. 20°C man. adjustable, Drying Temp. up to 70°C Hfsdpfx Abehzbq Tjrjc Indirect Gasburner approx 300KW (-10°C - +20°C) Software in delivered switch box Inlet air ceiling with filter G4/EU4 und NF600PA, Outside air bollom using grids and PS50 glas fiber Light (4x18W) wall integrated LED, 750LUX Grid point weight max750kg

Condition: new, Year of construction: 2026, total height: 3,000 mm, total length: 4,900 mm, total width: 2,400 mm, volume flow: 3.6 m³/h, type of input current: three-phase, power: 1.1 kW (1.50 HP), Equipment: cabin, Wet paint spray booth in cabin with extraction and supply air filter, lighting. Hfsdporvi Risfx Abrjc

Condition: used, Year of construction: 2003, functionality: fully functional, Wet Paint Coating System KRAUTZBERGER SPRITZTECHNIK incl. Coalescence Unit RODAP SR 185, Year 2003 Used wet paint coating system for surface finishing of metal parts (including decorative fittings/series parts). The system consists of the spraying technology by Krautzberger as well as a coalescence/separation unit RODAP SR 185 for processing/separating (e.g. overspray/mist extraction, depending on configuration). The scope of delivery also includes spray trolleys and various suspension racks for flexible part handling and series production. Hedpfxjx Sqtrs Abrofc Application area: Wet painting / spray coating of metal components and assemblies. Scope of delivery: Krautzberger spray technology + RODAP SR 185 + spray trolleys + various suspension racks. Inspection: by appointment (electrically connected possible by arrangement). Dismantling/loading: by purchaser or as agreed.

Condition: new, Year of construction: 2026, It is a complete painting system, consisting of the following components: Hodpfxjyaqt Ts Abrjfc 1) An oven comprising an air heater (the fuel type can be adapted to the customer’s requirements). 2) A spray painting booth equipped with an absorbent filtration system suitable for capturing even the most demanding paint applications. 3) Two parking areas, where the parts can be placed after painting or curing. 4) A rail system allowing easy movement of the parts from one station to another. 5) A trolley used for transporting the above-mentioned parts. 6) A fully integrated steel structure, statically robust, designed to minimize the risk of failure of any component. From both a design and technical specification standpoint, the above installation constitutes a complete and autonomous electrostatic painting process.

Condition: new, functionality: fully functional, Year of construction: 2026, Equipment: CE marking, Compact Flat Painting Machine for Small Workpieces The compact flat painting machine is an ideal solution for the automated coating of small workpieces. Designed for primers, lacquers, and paints, it ensures precise, uniform, and high-quality surface finishes. 🔧 Key Features: ✔️ Optimized for small parts – efficient and consistent coating results ✔️ Suitable for primers, lacquers, and paints ✔️ Spray area: 1200 × 800 mm   – customizable on request   – larger versions available ✔️ Easy integration into conveyor and production line systems ✔️ Control systems: Siemens or Beckhoff, according to customer requirements 🤖 Flexible & Efficient Automation This system is designed for small batch production and automated painting processes, offering high efficiency, flexibility, and user-friendly operation. Each machine can be individually configured to match specific production needs and technical requirements. 🚀 Your Benefits: Hedpfx Abox S Hd Horofc • Consistent coating quality • Reduced manual labor • Improved process reliability • Custom-engineered solution for your production line 📞 Interested in a customized solution? Contact us to discuss your project. We are an engineering company specializing in custom and robotic industrial painting systems for manufacturing environments. With over 20 years of experience, we deliver tailor-made solutions where standard equipment is not sufficient. Our expertise: • Industrial and robotic painting systems • Complete painting lines (design, manufacturing, installation) • Custom-made / non-standard engineering solutions • Integration into existing production layouts • Spray booths and painting walls • Metal fabrication and welding works We focus on automation, efficiency, repeatability, and reliability, adapting each system to the client’s production process and technical requirements.

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges Hsdpfx Aohbyr Sebrefc e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Condition: excellent (used), Roller PAINTING and FINISHING LINE (UV), max. working width mm 1300. Composed by: 01) cod. J05012) Sanding Machine "COSTA LEVIGATRICI" Mod. SN TR LFT 3 TT 1350 02) code Y11034) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 03) cod. Y11036) UV oven (1 lamp) "CEFLA" Mod. UV 2000 M1 - TT 2000 04) code Y11037) Roller Coater"SORBINI by CEFLA" Mod. SMARTCOATER M-1 AN 05) cod. Y11041) UV oven (2 lamps) "CEFLA" Mod. UV-R M20 06) code Y11061) Sanding Machine "COSTA LEVIGATRICI" Mod. SH3 TR TTTTR 1350 07) code Y11042) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 08) code Y11039) UV oven (2 lamps) "CEFLA" Mod. UV-R M2 Hfjdpehyty Asfx Abrec 09) code Y11035) Roller Coater "BURKLE" Mod. RCL-M 1300 (e.a.s.y. Coater) 10) code Y11043) UV oven (3 lamps) "CEFLA" Mod. UV-R M3

Condition: used, used overspray extraction system Condition: age-appropriate on castors Availability: short-term Storage location: Röllbach Hfjdpsw I Ut Tjfx Abrjc

Condition: new, functionality: fully functional, total length: 2,200 mm, total width: 2,200 mm, total height: 2,100 mm, overall weight: 680 kg, EURO Destoner and Washing Machine TWM 2000 D-DR With automatic stone discharge and counterflow washing Long feed chute and stone chute Two double-bearing, driven support shafts Heavy-duty drive chains Four discharge paddles Large discharge ring, water consumption approx. 1.0 – 4.8 m³/h depending on contamination and washing capacity Drive motor 2.2 kW/400 Volt Drum length approx. 1100 mm Drum diameter approx. 1800 mm Machine length approx. 2200 mm Machine width approx. 2200 mm Machine height approx. 2100 mm Weight approx. 680 kg Hfedpfox Swptox Abrsc Capacity max. 20 t/h.

Condition: used, Year of construction: 2018, functionality: fully functional, Punching machine, barely used, weight: 8500 kg. Lot includes steel cabinet with contents. Contents consist of tooling, spares and miscellaneous small parts. Hjdpsxzpvuefx Abrjfc

Condition: good (used), Year of construction: 2019, Kaj Olesen TWP54 Pin Bone remover Serial: 10810 Hfodpfsv Uquisx Abrsc 2019, stainless pin bone remover, capacity up to 350 - 700Kgs per hour, belt dimensions 1650mm x 350mm, 1Ph

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. - With a shared sliding door with the spray booth. - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. Hfjdpfx Absx H Rhrorec - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone.

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Features and technical data: - Berkmann extraction systems operate on the principle of displacement flow, meaning that a negative pressure is created on the wall side of the room, while an overpressure is generated on the opposite side by the supply air unit. - Almost the entire room air flows in a directed and low-turbulence manner from the supply air side toward the exhaust air side. - Paint mist generated within the flow area is captured and discharged. - With Berkmann extraction systems, air is extracted across the entire area, not just in the collection zone in front of the spray wall as with conventional systems. - This allows larger components to be painted as well. - It is also not necessary to work directly in front of the extraction unit. - The patented 'gap extraction' enables high extraction velocities at all sides (including at floor level, where solvents accumulate). - Due to the special arrangement, extremely large filter surfaces could be accommodated, resulting in very long filter service lives. - Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, enabling energy savings of up to 50%. - Includes paint mist extraction unit BASIC 7000 m³/h - With supply air unit Hsdpfxjxwz H Ro Abrjfc - With solvent evaporation unit - System is installed underground with grating cover - Dimensions of grating approximately 3,500 x 3,400 mm - Filter area of the unit: approx. 3.7 m² - Supply air unit approx. 82 kW, type 3072 FL/WW (two-stage) - Solvent evaporation unit approx. 3,000 m³/h exhaust air volume - Motor 1.1 kW - With supply air duct system featuring 4 large-area filter ceilings with explosion-proof lights - With control cabinet featuring microprocessor control - With used Kremlin paint application unit Price excludes dismantling, removal, and collection on site Availability: approx. mid-April 2026 Location: Hesse

Condition: new, Year of construction: 2025, functionality: fully functional, Fenice Plain Spray Booth Wall Brand new Available options: Plain-2000mm net price 17,800 PLN Filtration capacity 8,000 m3/h Motor power 1.5 kW Plain-3000mm net price 21,500 PLN Filtration capacity 11,000 m3/h Motor power 2.2 kW Plain-4000mm net price 25,800 PLN Filtration capacity 15,000 m3/h Motor power 4.0 kW Plain-5000mm net price 34,000 PLN Hfodpfx Abexz Achorec Filtration capacity 16,500 m3/h Motor power 5.5 kW Plain-6000mm net price 38,000 PLN Filtration capacity 22,000 m3/h Motor power 2.2 kW + 2.2 kW Custom sizes available on request

Condition: used, Year of construction: 2001, Used machine Equipment and technical data: Hodpfx Ajxdpl Uebrjfc - Working area width x height: 2400 x 1600 mm - Air capacity: 7000 m³/h - Motor: 2.2 kW - Exhaust duct: 400 mm - with energy-saving stand - with supply air channels Note: The Ex-lights shown in the pictures are not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach