Used Painting Table for sale (19,982)

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting Iodpfexabl Sox Abrehu - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg Iedpfx Abexaatnjrshu dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm Ihjdpoxaafqsfx Abrju swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: good (used), Year of construction: 1986, CNC Table-type Boring Mill Manufacturer: TOS VARNSDORF Model: WH 10 NC Year: 1986 with Heidenhain TNC 135 control. Spindle diameter: 100 mm Spindle taper: SK50 Spindle speeds: Motor 20 kW Spindle travel: 630 mm Travel paths: X 1250 mm, Y 1100 mm, Z 950 mm Table size: 1000 x 1120 mm, load capacity 3000 kg Ijdpfx Aeyk Tltjbrshu Weight: 12,800 kg Equipped with coolant system, machine documentation available. Machine not under power.

Condition: used, Trolley 12 levels - year of construction unknown Iedpjwbtvusfx Abrjhu - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm Iodpou Afu Rsfx Abrehu 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, Year of construction: 2013, machine/vehicle number: 13051888-1/012 Art.-Nr. 6153100, Technical data: - Manufacturer: Unikraft - Type: SHT 1001 G - Year of manufacture: 2013 - Platform dimensions: 1450x1130mm - Lifting capacity: 1,000kg - Hydraulic lifting device - Net weight: 250kg - Min. height: 82 mm - Max. lifting height: 760 mm - Duration from 82 to 760 mm Ihedpfx Aewxtwysbrou Lifting height: 18 s - Motor power: 0.75 kW - Anti-pinch strips - Voltage/Hz: 400/50 - Location: Blomberg warehouse

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock Ihodpfx Abjumvtqerou - Voltage fluctuation max. +/- 5 %

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! Zonder freeskop kunt u klassieke verticale bewerkingen uitvoeren. Met de multihoekfrees (MA-25) kunt u veel verschillende vlakken bewerken. MA-25 2-assige freeskop - 30 kW - 2000 tpm - 1500 Nm koppel C-as bereik: 0-360° - 2,5° Bereik van de A-as: +/- 110° - 2,5° Koeling via spindel: 40 bar Totaal vermogen: 67 kW Geen foundation nodig! De Johnford DMC-serie brugfreesmachine met dubbele kolom en beweegbare tafel is vervaardigd uit een brug/kolomconstructie van gegoten Meehanite-ijzer, die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met C-frame. De brugfreesmachines zijn verkrijgbaar in uitvoeringen met beweegbare tafel en met schuifkolom (vaste tafel), met afmetingen variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De lange basisconstructie biedt volledige ondersteuning aan de tafel over de gehele Y-asbeweging van 130 cm, waardoor zeer zware werkstukken bewerkt kunnen worden. De Y- en Z-assen dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt. Dit maakt nauwkeurige bewerkingen en strakke toleranties mogelijk tijdens bewerkingen met hoge snelheid. Doordat er geen tafeloverhang is, worden de helling en de draaiing van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat de stijfheid verder verhoogt. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange levensduur van het gereedschap en een goede oppervlakteafwerking van het werkstuk. De combinatie van twee schroefbandtransporteurs en een rupsbandtransporteur garandeert een volledige spaanafvoer met minimale handmatige reiniging. Bovendien wordt eindige-elementenanalyse (FEA) gebruikt voor het ontwerp van elke brugfreesmachine, waarbij de effecten van realistische omstandigheden, zoals trillingen, warmte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm Ihedpfx Aexp Sk Dsbrju

Condition: new, BRAND NEW NC ROTARY TABLES Ihodpfx Aem Tvz Dobreu Working position: vertical - horizontal Applications: positioning - stepless rotation // interpolation Rotary table faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm – The clamping surface can also be square Max. workpiece weight (horizontal): up to 20,000 kg Max. workpiece weight (vertical): up to 4,000 kg Positioning accuracy: ± 3 arc seconds Integration into machines with HEIDENHAIN or SIEMENS controls. Only inquiries from Germany will be answered.

Condition: new, FACTORY NEW ROTARY TABLES // ROTARY-SLIDE TABLES Isdpfem Tv Azox Abrjhu Positioning, simultaneous turning, and interpolation Rotary table sizes: 1,000 x 1,000 // 1,200 x 1,200 // 1,500 x 1,500 // 1,800 x 1,800 // 2,000 x 2,000 // 2,500 x 2,500 // 3,000 x 3,000 // 3,500 x 3,500 // 4,000 x 4,000 mm --- The clamping surface can also be round instead of square - Maximum workpiece weight: 6,000 to 80,000 kg Optional sliding axis: 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ±5 arc seconds Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: ready for operation (used), Fully Equipped Water-Based Paint Factory Sale or lease of the entire site or individual plant components - Over 50 mixing and stirring tanks (stainless steel) - 5 horizontal ball mills (including Netzsch ZWM 88) for fine dispersion - Extensive dispersing, dissolver, and transfer systems - Tank farm with tanker and container unloading - Filling lines for small and large containers Isdpfxsyknluj Abrohu - High-bay warehouse with approx. 2,300 pallet spaces - Container cleaning system - Laboratory, workshop, office, and social areas - Complete utilities, cooling, ventilation, and safety technology (EX design) The existing infrastructure allows for flexible utilization – from immediate production start-up and capacity expansion to project-based or temporary usage concepts. This makes the site attractive for both strategic buyers and lessees/tenants. Further details, technical specifications, and layout plans available on request.

Condition: excellent (used), functionality: fully functional, load capacity: 4,000 kg, Severt manual column lift and rotation device, including matching perforated table 1500 x 1500 x 200 mm for bolting, included. Optionally available with tooling for perforated table accessory set. Excellent condition (see video). Hydraulically height adjustable, minimum 800 mm, maximum 2400 mm. Load capacity 4000 kg. Perforated table 1500 x 1500 x 200 mm, type 28 mm. Ijdpfx Ajyli Uyebrshu

Condition: excellent (used), Grinding diameter: 400 mm Round magnetic chuck: Ø 400 mm Grinding wheel: 200 x 80 x 78 mm 2 speeds: 20/40 rpm Grinding wheel speed: max. 2850 rpm Max. distance between table and grinding wheel: 280 mm Throat: 315 mm Fine adjustment: 0.01 mm Ijdpfx Absykkhlorshu Motor power: 3 kW Dimensions (L x W x H): approx. 700 x 900 x 1800 mm Weight: approx. 550 kg The machine comes from a training workshop and is in very well-maintained condition. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 120 mm Tool holder: MK5 incl. integral fence Weight: approx. 1000 kg Storage location: Supplier Ihjdpjx It Auefx Abrsu

Condition: used, Year of construction: 1996, Incl. 3-roller feed, control panel on top, table extensions, pull-out support, tilting from -5° to +45°. Location: supplier Isdpjyk U Tljfx Abrjhu

Condition: good (used), Code: 0302 Brand: ALTENDORF Model: F 45 - CE Standard Isdpeylhmzofx Abrohu CNC-controlled 3-axis panel saw with tilting blade for furniture, custom-made furnishings, panels, doors, wooden window frames, plastics, composite materials and various - CE Standard Technical data: Precise sliding double roller carriage Aluminium carriage length 3200 mm Max blade diameter 450 mm Max cutting height 150 mm Cutting height at 45° 105 mm Scoring unit blade diameter 120 mm 3 controlled axis (lifting/blade tilting/parallel guide) Electric motor adjustment 2-axis scoring unit Control panel at operator height with colour LCD screen Anodised aluminium table extension 840 mm Parallelogram blade guard Register for oblique square cuts, manual adjustment, with length compensation, end cutting up to 3500 mm Blade locking system Work table height 910 mm Overall dimensions of assembled machine mm 3400 x 3400 x 1700 h Overall dimensions for transport mm 3400 x 2100 x 1700 h Weight kg 1050

Condition: used, • Machine No.: 2529 • Year of manufacture: 2021 • Automatic positioning stops for length adjustment • CNC control system with operator guidance via monitor • Integrated cutting plan display • 2 special cutting heads for laminated glass (VSG) cutting • Lower cutting head can be deactivated for float glass cutting • Automatic cutting oil supply for both upper and lower cutting heads • Cutting oil canister with fill level monitoring • Automatic breaking roller for opening the lower cut • Lowerable take-off table for opening the upper cut • Separation device with hold-downs, also suitable for LOW-E coated glasses • Continuous special heating element beneath, swiveling • Thermal-mechanical separation device for dividing multiple interlayers • Cut line marking for diagonal cuts by visible laser • Glass flow direction: right to left • Maximum cutting length VSG: 3700 mm • Maximum glass size: 6100 mm x 3210 mm • VSG glass thickness: 2x3 to 2x8 mm • Interlayer thickness: 0.38 to 3.8 mm • Working height: 940 mm +/- 20 mm • Cutting speed: 90 m/min Ihsdpfx Asw Uptzsbrsu • Cutting accuracy: +/- 0.5 mm • Length alignment: 25 mm to 3700 mm • Automatic length alignment: min. 230 mm x 800 mm • Operator-side turning device • Price on request

Condition: used, Year of construction: 2009, - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MKR30029343 - Rail present: No Financial information Iedpfxswnh I Ee Abrjhu VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, This Demmeler welding table is being auctioned online as part of our RESTLOS construction machinery auction "Plant Closure (Relocation) Part 2 - Elevator Works for Brandner Revalue GmbH - Heavy-duty shelving - Transport trolleys - Machines and equipment - Cranes - Workshop cabinets - Assembly tables - Welding curtains - Office furniture and much more," taking place in 73765 Neuhausen auf den Fildern. Ijdpfsykqqyox Abrshu You will find this and many other items, including welding technology, workshop and production equipment from well-known brands such as Eurokraft, Fetra, Kaiser + Kraft, Krause, Bito, Garant, Denios, Würth, Beewatec, Gaerner, SSI Schäfer, Wini, König und Neurath, Steelcase, Soehnle, and Quipo, on our RESTLOS auction platform.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, Stainless steel table cart Isdpewpzrmjfx Abrshu Glazing table with 10 tray shelves 780 x 580 or 600 x 400 trays Mobile with 2 brake castors Used device, cleaned We have many more stainless steel furniture in stock!

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, table load: 12,000 kg, total height: 3,800 mm, total length: 8,800 mm, total width: 5,900 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, overall weight: 42,000 kg, Table type boring mill Fermat - WFT 13 CNC MACH-ID 9430 Make: Fermat Type: WFT 13 CNC Control: HeidenHain iTNC530 Year: 2015 X - Travel: 3000mm Y - Travel: 2000mm Z - Travel: 1500mm W - Travel: 700mm Table Length: 1800mm Table Width: 1600mm Table load: 12000 Speeds / ranges: 3000Rpm Power: 61kW Ram size: 300 x 300mm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 1-20000mm/min. Feed rate Y-Axis: 1-20000mm/min. Feed rate Z-Axis: 1-20000mm/min. Feed rate W-Axis: 1-20000mm/min. ATC Toolchanger: 30 Number of controlled axis:5 Length: 8800mm Width: 5900mm Height: 3800mm Weight: 42002kg Ihedpfxsyim I Re Abrou Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2026, total height: 970 mm, total width: 3,400 mm, Work tables AT 3400, mobile Stainless steel worktop with rear gallery Drawer unit on the right 2 stainless steel flour trolleys 8 ingredient containers on the left with stainless steel lid Ihodpfx Abowyrw Ijrou Used device, cleaned Dimensions: 3400 x 800 x 970 mm (W x D x H) Option: Delivery service Many more tables in stock!

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Ijdpfx Aboxnlavjrjhu

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 1,400 mm, total height: 850 mm, TOP Work Table AT 1400 with Stainless Steel Top Work Table / Baker's Table Stainless steel work surface with rear upstand Bottom shelf Stainless steel construction with 2 doors Dimensions approx.: 1400 x 800 x 850 mm (W x D x H) Iodpfxsykig To Abrehu Used unit, cleaned Option: Delivery service